set -e test -z $NIX_GCC && NIX_GCC=@gcc@ # Set up the initial path. PATH= for i in $NIX_GCC @initialPath@; do PATH=$PATH${PATH:+:}$i/bin done if test "$NIX_DEBUG" = "1"; then echo "Initial path: $PATH" fi # Execute the pre-hook. export SHELL=@shell@ param1=@param1@ param2=@param2@ param3=@param3@ param4=@param4@ param5=@param5@ if test -n "@preHook@"; then source @preHook@ fi # Check that the pre-hook initialised SHELL. if test -z "$SHELL"; then echo "SHELL not set"; exit 1; fi # Hack: run gcc's setup hook. envHooks=() if test -f $NIX_GCC/nix-support/setup-hook; then source $NIX_GCC/nix-support/setup-hook fi # Ensure that the given directory exists. ensureDir() { local dir=$1 if ! test -x "$dir"; then mkdir -p "$dir"; fi } # Called when some build action fails. If $succeedOnFailure is set, # create the file `$out/nix-support/failed' to signal failure, and # exit normally. Otherwise, exit with failure. fail() { exitCode=$? if test "$succeedOnFailure" = 1; then ensureDir "$out/nix-support" touch "$out/nix-support/failed" exit 0 else exit $? fi } # Allow the caller to augment buildInputs (it's not always possible to # do this before the call to setup.sh, since the PATH is empty at that # point; here we have a basic Unix environment). if test -n "$addInputsHook"; then $addInputsHook fi # Recursively find all build inputs. findInputs() { local pkg=$1 case $pkgs in *\ $pkg\ *) return 0 ;; esac pkgs="$pkgs $pkg " if test -f $pkg/nix-support/setup-hook; then source $pkg/nix-support/setup-hook fi if test -f $pkg/nix-support/propagated-build-inputs; then for i in $(cat $pkg/nix-support/propagated-build-inputs); do findInputs $i done fi } pkgs="" if test -n "$buildinputs"; then buildInputs="$buildinputs" # compatibility fi for i in $buildInputs $propagatedBuildInputs; do findInputs $i done # Set the relevant environment variables to point to the build inputs # found above. addToEnv() { local pkg=$1 if test "$ignoreFailedInputs" != "1" -a -e $1/nix-support/failed; then echo "failed input $1" >&2 fail fi if test -d $1/bin; then export _PATH=$_PATH${_PATH:+:}$1/bin fi for i in "${envHooks[@]}"; do $i $pkg done } for i in $pkgs; do addToEnv $i done # Add the output as an rpath. if test "$NIX_NO_SELF_RPATH" != "1"; then export NIX_LDFLAGS="-rpath $out/lib $NIX_LDFLAGS" fi # Strip debug information by default. if test -z "$NIX_STRIP_DEBUG"; then export NIX_STRIP_DEBUG=1 export NIX_CFLAGS_STRIP="-g0 -Wl,--strip-debug" fi # Do we know where the store is? This is required for purity checking. if test -z "$NIX_STORE"; then echo "Error: you have an old version of Nix that does not set the" \ "NIX_STORE variable. Please upgrade." >&2 exit 1 fi # We also need to know the root of the build directory for purity checking. if test -z "$NIX_BUILD_TOP"; then echo "Error: you have an old version of Nix that does not set the" \ "NIX_BUILD_TOP variable. Please upgrade." >&2 exit 1 fi # Set the TZ (timezone) environment variable, otherwise commands like # `date' will complain (e.g., `Tue Mar 9 10:01:47 Local time zone must # be set--see zic manual page 2004'). export TZ=UTC # Execute the post-hook. if test -n "@postHook@"; then source @postHook@ fi PATH=$_PATH${_PATH:+:}$PATH if test "$NIX_DEBUG" = "1"; then echo "Final path: $PATH" fi ###################################################################### # What follows is the generic builder. nestingLevel=0 startNest() { nestingLevel=$(($nestingLevel + 1)) echo -en "\e[$1p" } stopNest() { nestingLevel=$(($nestingLevel - 1)) echo -en "\e[q" } header() { startNest "$2" echo "$1" } # Make sure that even when we exit abnormally, the original nesting # level is properly restored. closeNest() { while test $nestingLevel -gt 0; do stopNest done } trap "closeNest" EXIT # This function is useful for debugging broken Nix builds. It dumps # all environment variables to a file `env-vars' in the build # directory. If the build fails and the `-K' option is used, you can # then go to the build directory and source in `env-vars' to reproduce # the environment used for building. dumpVars() { if test "$noDumpEnvVars" != "1"; then export > $NIX_BUILD_TOP/env-vars fi } # Redirect stdout/stderr to a named pipe connected to a `tee' process # that writes the specified file (and also to our original stdout). # The original stdout is saved in descriptor 3. startLog() { local logFile=${logNr}_$1 logNr=$((logNr + 1)) if test "$logPhases" = 1; then ensureDir $logDir exec 3>&1 if test "$dontLogThroughTee" != 1; then # This required named pipes (fifos). logFifo=$NIX_BUILD_TOP/log_fifo test -p $logFifo || mkfifo $logFifo startLogWrite "$logDir/$logFile" "$logFifo" exec > $logFifo 2>&1 else exec > $logDir/$logFile 2>&1 fi fi } # Factored into a separate function so that it can be overriden. startLogWrite() { tee "$1" < "$2" & logWriterPid=$! } if test -z "$logDir"; then logDir=$out/log fi logNr=0 # Restore the original stdout/stderr. stopLog() { if test "$logPhases" = 1; then exec >&3 2>&1 # Wait until the tee process has died. Otherwise output from # different phases may be mixed up. if test -n "$logWriterPid"; then wait $logWriterPid logWriterPid= rm $logFifo fi fi } # Utility function: return the base name of the given path, with the # prefix `HASH-' removed, if present. stripHash() { strippedName=$(basename $1); if echo "$strippedName" | grep -q '^[a-z0-9]\{32\}-'; then strippedName=$(echo "$strippedName" | cut -c34-) fi } unpackFile() { local file=$1 local cmd case $file in *.tar) cmd="tar xvf $file";; *.tar.gz | *.tgz | *.tar.Z) cmd="tar xvfz $file";; *.tar.bz2 | *.tbz2) cmd="tar xvfj $file";; *.zip) cmd="unzip $file";; *) if test -d "$file"; then stripHash $file cmd="cp -prvd $file $strippedName" else if test -n "$findUnpacker"; then $findUnpacker $1; fi if test -z "$unpackCmd"; then echo "source archive $file has unknown type" exit 1 fi cmd=$unpackCmd fi ;; esac header "unpacking source archive $file (using $cmd)" 3 $cmd || fail stopNest } unpackW() { if test -n "$unpackPhase"; then $unpackPhase return fi if test -z "$srcs"; then if test -z "$src"; then echo 'variable $src or $srcs should point to the source' exit 1 fi srcs="$src" fi # To determine the source directory created by unpacking the # source archives, we record the contents of the current # directory, then look below which directory got added. Yeah, # it's rather hacky. local dirsBefore="" for i in *; do if test -d "$i"; then dirsBefore="$dirsBefore $i " fi done # Unpack all source archives. for i in $srcs; do unpackFile $i done # Find the source directory. if test -n "$setSourceRoot"; then $setSourceRoot else sourceRoot= for i in *; do if test -d "$i"; then case $dirsBefore in *\ $i\ *) ;; *) if test -n "$sourceRoot"; then echo "unpacker produced multiple directories" exit 1 fi sourceRoot=$i ;; esac fi done fi if test -z "$sourceRoot"; then echo "unpacker appears to have produced no directories" exit 1 fi echo "source root is $sourceRoot" # By default, add write permission to the sources. This is often # necessary when sources have been copied from other store # locations. if test "dontMakeSourcesWritable" != 1; then chmod -R +w $sourceRoot fi if test -n "$postUnpack"; then $postUnpack fi } unpackPhase() { header "unpacking sources" startLog "unpack" unpackW stopLog stopNest } patchW() { if test -n "$patchPhase"; then $patchPhase return fi for i in $patches; do header "applying patch $i" 3 patch -p1 < $i || fail stopNest done } patchPhase() { if test -z "$patchPhase" -a -z "$patches"; then return; fi header "patching sources" startLog "patch" patchW stopLog stopNest } fixLibtool() { sed 's^eval sys_lib_.*search_path=.*^^' < $1 > $1.tmp mv $1.tmp $1 } configureW() { if test -n "$configurePhase"; then $configurePhase return fi if test -n "$preConfigure"; then $preConfigure fi if test -z "$prefix"; then prefix="$out"; fi if test "$useTempPrefix" = "1"; then prefix="$NIX_BUILD_TOP/tmp_prefix"; fi if test -z "$configureScript"; then configureScript=./configure if ! test -x $configureScript; then echo "no configure script, doing nothing" return fi fi if test -z "$dontFixLibtool"; then for i in $(find . -name "ltmain.sh"); do echo "fixing libtool script $i" fixLibtool $i done fi if test -z "$dontAddPrefix"; then configureFlags="--prefix=$prefix $configureFlags" fi echo "configure flags: $configureFlags" $configureScript $configureFlags || fail if test -n "$postConfigure"; then $postConfigure fi } configurePhase() { header "configuring" startLog "configure" configureW stopLog stopNest } buildW() { if test -n "$buildPhase"; then $buildPhase return fi if test -n "$preBuild"; then $preBuild fi echo "make flags: $makeFlags" make $makeFlags || fail if test -n "$postBuild"; then $postBuild fi } buildPhase() { if test "$dontBuild" = 1; then return fi header "building" startLog "build" buildW stopLog stopNest } checkW() { if test -n "$checkPhase"; then $checkPhase return fi if test -z "$checkTarget"; then checkTarget="check" fi echo "check flags: $checkFlags" make $checkFlags $checkTarget || fail } checkPhase() { if test "$doCheck" != 1; then return fi header "checking" startLog "check" checkW stopLog stopNest } patchELF() { # Patch all ELF executables and shared libraries. header "patching ELF executables and libraries" find "$prefix" \( \ \( -type f -a -name "*.so*" \) -o \ \( -type f -a -perm +0100 \) \ \) -print -exec patchelf --shrink-rpath {} \; stopNest } installW() { if test -n "$installPhase"; then $installPhase return fi if test -n "$preInstall"; then $preInstall fi ensureDir "$prefix" if test -z "$dontMakeInstall"; then echo "install flags: $installFlags" make install $installFlags || fail fi if test -z "$dontStrip" -a "$NIX_STRIP_DEBUG" = 1; then find "$prefix" -name "*.a" -exec echo stripping {} \; \ -exec strip -S {} \; || fail fi if test "$havePatchELF" = 1 -a -z "$dontPatchELF"; then patchELF "$prefix" fi if test -n "$propagatedBuildInputs"; then ensureDir "$out/nix-support" echo "$propagatedBuildInputs" > "$out/nix-support/propagated-build-inputs" fi if test -n "$postInstall"; then $postInstall fi } installPhase() { if test "$dontInstall" = 1; then return fi header "installing" startLog "install" installW stopLog stopNest } distW() { if test -n "$distPhase"; then $distPhase return fi if test -n "$preDist"; then $preDist fi if test -z "$distTarget"; then distTarget="dist" fi echo "dist flags: $distFlags" make $distFlags $distTarget || fail if test "$dontCopyDist" != 1; then ensureDir "$out/tarballs" if test -z "$tarballs"; then tarballs="*.tar.gz" fi # Note: don't quote $tarballs, since we explicitly permit # wildcards in there. cp -pvd $tarballs $out/tarballs fi if test -n "$postDist"; then $postDist fi } distPhase() { if test "$doDist" != 1; then return fi header "creating distribution" startLog "dist" distW stopLog stopNest } genericBuild() { header "building $out" unpackPhase cd $sourceRoot if test -z "$phases"; then phases="patchPhase configurePhase buildPhase checkPhase \ installPhase distPhase"; fi for i in $phases; do dumpVars $i done stopNest } dumpVars