This patch adds support to configure host mtu size using
api, cli or startup.conf.
Type: feature
Change-Id: I8ab087d82dbe7dedc498825c1a3ea3fcb2cce030
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Previous use of strndup() required user to remember to call free().
Now return a vector pointing directly to the API message string.
Of course user must remember to copy the string out if lifetime
is longer than API message lifetime.
Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Build api trace message print fns into the built-in copy of api_format.c
Optimize memory allocator behavior when the api trace wraps.
Type: Fix
Change-Id: If799d8784a459f981fc9ee3a3ca03d3f63b2bcd0
Signed-off-by: Dave Barach <dave@barachs.net>
there's no use case to just change the key of an SA. instead the SA
should be renegociated and the new SA applied to the existing SPD entry
or tunnel.
the set_key functions were untested.
Type: refactor
Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002
Signed-off-by: Neale Ranns <nranns@cisco.com>
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions
- move the punt nodes into punt_node.c
- improve tests (test that the correct packets are punted to the registered socket)
Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72
Signed-off-by: Neale Ranns <nranns@cisco.com>
Add a registration overwritten warning to ip4_icmp_register_type(...)
Change-Id: I6c2aabdb979b54ec49e827225acc74559ac4caab
Signed-off-by: Dave Barach <dave@barachs.net>
vpp/src/vat/main.c
When change the window size,the vat will get the SIGWINCH signal and then exit.
It is not a exit action,so we can ignore it.
Change-Id: If796762216910e23cace09406d413331f505d990
Signed-off-by: ezkexma <maqi.z.ke@ericsson.com>
for easy integration with ptoducts running their own Ike stack.
Without the VPP IKE plugin loaded, the product is free to handle
IKE packets as it pleases.
Change-Id: Id0839f4d58b797f4c2da0382eb499fc08b05f66f
Signed-off-by: Neale Ranns <nranns@cisco.com>
1) stats are accessed via the stat segment which is more condusive to
monitoring
2) stats are accurate in the presence of multiple threads. There's no
guarantee that an SA is access from only one worker.
Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148
Signed-off-by: Neale Ranns <nranns@cisco.com>
in the same maaner as with other tunnel tyeps we use
the FIB to cache and track the destination used to reach
the tunnel endpoint. Post encap we can then ship the packet
straight to this adjacency and thus elide the costly second
lookup.
- SA add and del function so they can be used both directly
from the API and for tunnels.
- API change for the SA dump to use the SA type
- ipsec_key_t type for convenience (copying, [un]formating)
- no matching tunnel counters in ipsec-if-input
Change-Id: I9d144a59667f7bf96442f4ca66bef5c1d3c7f1ea
Signed-off-by: Neale Ranns <nranns@cisco.com>
- return the stats_index of each SPD in the create API call
- no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly
- only one pool of SPD entries (rhter than one per-SPD) to support this
- no packets/bytes in the dump API. Polling the stats segment is much more efficient
(if the SA lifetime is based on packet/bytes)
- emit the policy index in the packet trace and CLI commands.
Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569
Signed-off-by: Neale Ranns <nranns@cisco.com>
- use enums to enumerate the algoritms and protocols that are supported
- use address_t types to simplify encode/deocde
- use typedefs of entry objects to get consistency between add/del API and dump
Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
Implement API/CLI to clear IP-MAC tables used for ARP-termination
in the specified bridge domain.
The CLI to flush MAC IP tables for a BD is:
set bridge-domain arp entry <bd-id> del-all
The API added is bd_ip_mac_flush.
Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8
Signed-off-by: John Lo <loj@cisco.com>
Change the definition of vl_api_mac_address_t to an aliased type.
Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134
Signed-off-by: Ole Troan <ot@cisco.com>
String is not sent nul terminated across API.
The hardest two problems in computer science is cache invalidation
naming and off by one errors.
Change-Id: I36f1952ca955cb2d9dfb4c8120ec48c50ba17991
Signed-off-by: Ole Troan <ot@cisco.com>
The new string type is modelled after string in proto3.
It is always variable length.
Change-Id: I64884067e28a80072c8dac31b7c7c82d6e306051
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Remove old nonfunctional code for setting link-local addresses.
Use common API for setting all IPv6 addresses.
Change-Id: I562329df86341f81ef2441510a9eefbbf710f6e0
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
Signed-off-by: Matus Fabian <matfabia@cisco.com>
