If buffer alloc fails, it may happend that rx queue will be stuck
as old code only refills if at least one packet is received.
Type: fix
Change-Id: I388c4f8a9fb2c208bdc222e31b443cbe6b94af82
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit e7f7190381)
Turn on gso, turn off both indirect and mrg_rxbuf caused traffic received
and sent with checksum error. The problem is we are not mapping the hdr
correctly in the shared memory address.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I7ef3bc2755544167b0e624365988111b17399e89
(cherry picked from commit b232d192f2)
This issue is observed with X520-2 NICs on FD.io lab Taishan server.
After VPP booting up and bringing up the interfaces with command "set
interface state <interface> up", it still shows link down status from
the command "show hardware-interfaces". However, the hardware link
status is actually up. dpdk_process() cannot get the hardware link
status correctly via rte_eth_link_get_nowait().
In ixgbe_dev_link_update_share(), if the media type is fiber and the
link is down, a flag (IXGBE_FLAG_NEED_LINK_CONFIG) is set. A callback to
ixgbe_dev_setup_link_alarm_handler() is scheduled trying to set up the
link and clear the flag afterwards.
If the device is started or stopped before the flag is cleared, the
scheduled callback is canceled. This causes the flag to remain set and
subsequent calls to ixgbe_dev_link_update_share() return without trying
to retrieve the link state because the flag is set.
When the callback is canceled by either interface start or stop
operation, in ixgbe_dev_cancel_link_thread(), after cancelling the
callback/thread, unset the flag on the device to avoid this condition.
Type: fix
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
Reviewed-by: Jieqiang Wang <Jieqiang.Wang@arm.com>
Change-Id: I04de377dc048307a78a5b7109ebdfaf376d5e029
(cherry picked from commit 1690dcb495)
Right now following configuration leads to crash:
cpu {
corelist-workers 2
workers 2
}
because threads count will be set to 2, but we have only
one core in coremask.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Ia93b892733971e7c8ddfceaaec5f4eb8bf9063ac
(cherry picked from commit 18a4a37164)
On SMP architecture, '/sys/bus/pci/devices/<devices id>/numa_node' file
will return -1 as a valid value if it does not have any NUMA node information.
Using -1 as a valid node id to access data structures will cause memory issue.
Fix the error by setting the value of numa_node to 0 if '/sys/bus/pci/devices/
<devices id>/numa_node' returns -1 and it is a SMP system.
Type: fix
Change-Id: Ib60e79c3656fe5b17e08fd9011122683e8b08b6f
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
(cherry picked from commit 76c6159d83)
Rather than leaving 2 bytes of junk in the upper word
of a mac address represented as a u64, zero them out.
That way later compairsons stand a chance of matching
when deleting a bridge's arp termination entries.
The volatile qualifier shouldn't be needed here, but
without it the compiler removes the clib_memcpy() at -O2.
Bad compiler. No biscuit.
Type: fix
commit: faf22cb303
Change-Id: Iebcf35fdd421293dccbcaefadef767f7e139438e
Signed-off-by: Jon Loeliger <jdl@netgate.com>
(cherry picked from commit 6a32ce3264)
The port registry uses host byte order for while the session API
uses network order. In a single place the conversion was missing.
Type: fix
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: Ic8cfe2cb4e0711b3e0614060ff6b4f2fe4ed4391
(cherry picked from commit 49a11cff8e)
policycoreutils-python is now called python3-policycoreutils on
CentOS 8.
Type: fix
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: I46264c66a2a719d546e0926f3bd716e986461963
(cherry picked from commit 1d94ab5f1b)
This path flag FIB_API_PATH_TYPE_INTERFACE_RX is not copied to the client bin_api.
Type: fix
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: I612044d2f564c852f83fceb63ce750a6330e1365
(cherry picked from commit 79437c8dbc)
VIP prefix index becomes always 0 when adding a VIP which is already registered different port, causing LB config crash.
This change assigns the same VIP prefix index to the same VIP.
Ticket: https://jira.fd.io/browse/VPP-1834
Type: fix
Signed-off-by: Yasuhiro Nakamura <yanakamu@yahoo-corp.jp>
Change-Id: Ib63b3e58db9bd85714d68cd1292aadd0c8580da8
(cherry picked from commit 551775eaaa)
Without this patch offset for TCP/UDP headers was not calculated
correctly if there is one or more IPv6 extension headers.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I04d6f5e42f8f072987192d6236085afbd74a4420
(cherry picked from commit 7d4cd0cf6f)
coverity complains that the subject test may cause dst buffer overrun
problem and it is right. The problem is when __builtin_constant_p (n)
returns true, memcpy_s_inline skips all the errors checking and does the
copy blindly. Please see the code in memcpy_s_inline.
The fix is to skip the subject test when the aformentioned builtin function
returns true.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I50de91cc0c853a134b3bcf3b0cd8d45d7668b092
(cherry picked from commit 2da39718f5)
With this commit, forward the translated packet directly to the
specified next-hop if pre-resolve param is enabled in MAP-T.
Type: fix
Change-Id: Ie26080c7820318c7982599577a4af6e4d01a0574
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
(cherry picked from commit f145c15631)
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b)
check the indicated condition in production images.
As in:
p = hash_get(...);
ALWAYS_ASSERT(p) /* was ASSERT(p) */
elt = pool_elt_at_index(pool, p[0]);
This may not be the best way to handle a specific case, but failure to
check return values at all followed by e.g. a pointer dereference
isn't ok.
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
(cherry picked from commit 47d41ad62c)
Type: fix
this patch fixes mark flow deletion crash issue, see below
test flow add src-ip any proto udp src-port 111 dst-port 222 mark 100
test flow enable index 0 1/1
test flow disable index 0 1/1
test flow enable index 0 1/1
test flow disable index 0 1/1 -> [crash]
This is because the code resets a wrong vector in flow lookup entry
recycle logic. See function dpdk_flow_ops_fn().
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I2b0a1e531931ab25541d672d88da18dc2289f1ce
(cherry picked from commit cd120f9bbb)
According to the description in the startup.conf, the assignment
of worker threads starts with the lcore following the main_lcore.
A non-zero skip_cores will correctly achieve this assignment.
However, prior to this patch when workers are assigned, the code
picks up and assigns core 0 even thought it shouldn't.
This patch determins if a non-zero number of workers are desired
and if so, marks CPU unavailable for a worker assignment.
Type: fix
Change-Id: I1fdf73a6f218dcbf146fda2efc90c553f7cd6d20
Signed-off-by: Jon Loeliger <jdl@netgate.com>
(cherry picked from commit 4a06846dd6)
L4 checksums for IPv6 should be calculated using a pseudo header that
includes the source/destination addresses, payload length, and payload
protocol.
ip6_tcp_udp_icmp_compute_checksum() was using the payload length and
protocol from the IPv6 header. If there is a hop-by-hop header (or any
other extension header), the payload length used for the pseudo header
should only include the upper layer header and payload and not the
extension header bytes. Same deal with the protocol, the upper layer
next header value should be used instead of the extension header.
Type: fix
Fixes: cb9cadad57
Change-Id: Ifa2c9ad41c0fc4eea674f0671255b637c8e01f71
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 97677a26f7)
Using random addresses can confuse AddressSanitizer
Type: fix
Change-Id: I44368093f899672ac4d511cc5a01ed87c988e63a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit dc90c719bc)
