Topics added: disabling lightly-used, experimental, or test plugins
by default. Discourage folks from creating bihash tables, processes
etc. from VLIB_INIT_FUNCTIONs.
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I1235d64971e9ed50f992b75f96b77c934168276a
The local|remote options to vat's lisp|one_eid_table_dump api command
does not print the eid details instead it produces the following error
messages:
Filter error, unknown filter: 1
Filter error, unknown filter: 2
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I000c290b400dbf39bd883d57115923167092c9bd
Currently l2 fib allocates 512MB hash table unconditionally on startup.
This patch postpones table creation up to the point where first
interface is put into l2 mode or mac entry is added.
In addition it reduces default table size to 128MB and increases number
of buckets 4 times. This default setting should be enough to keep 1M mac
entries.
Also, new startup.conf section is added which allows user to change memory
and bucket size. .i.e:
l2fib {
table-size 512M
num-buckets 524288
}
Type: improvement
Change-Id: I2a29209aa3545181f0087544c97a54d8157b6ec5
Signed-off-by: Damjan Marion <damarion@cisco.com>
To enable add "app-socket-api /path/to/socket" to vcl.conf. On vpp side, add
use-app-socket-api to session stanza in startup.conf
VPP allocates a socket per application namespace which it places in the
app_ns_sockets subfolder of the run folder (default /var/run/vpp). The
socket used implicitly selects the app namespace for the vcl app.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifc14b93dcbf6ef9bed1852d46cd069f4855b92ef
This is an af_unix socket alternative to the binary api. To enable it,
add use-app-socket-api under session stanza in startup.conf. When the
socket api is enabled, attachments through the binary api are disabled.
The socket api only works with memfd fifo segments, i.e., shm segments
are not supported.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I55ffcee201d004846daeeec85c700c7e7a578d43
The dslite plugin would on plugin load initialize large bihash datastructures.
Postpone until configured.
Type: improvement
Change-Id: Ie790ab8c5fc39fac18153acd54dcd051805e763a
Signed-off-by: Ole Troan <ot@cisco.com>
Type: fix
add UT for sneding handshale init and transport packets
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iab1ed8864c666d5a0ae0b2364a9ca4de3c8770dc
In the vat help msg for one_add_del_l2_arp_entry the IP address option
is misspelled as "ip4 <ip4>" when it should have been "ip <ip4>".
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Id4058a3ddfdb78b840d7e5a3c330e67b393f5d3b
The lisp|one show eid-table command's help msg does not display the
available options. This patch fixes that.
show lisp eid-table [local|remote|eid <eid>]
show one eid-table [local|remote|eid <eid>]
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Id39148db2ff291a7fe859830c1488b69ccd15c05
Avoid situations where promisc mode is chaged while avf process
is suspended in the middle of adminq operation.
Type: fix
Change-Id: Ia1fc6551e83218b5938630ad3a15d4f3f0ceceff
Signed-off-by: Damjan Marion <damarion@cisco.com>
Multiple (> 1) workers leads to handoff node being enabled.
This node pops next feature index to nat.arc_next to make sure
that packet will be pushed to the next feature in the arc.
But node nat44-ed-in2out-output also pops next feature and changes
arc_next. So actual next feature will be skipped in that case.
It leads to all nat44-ed-in2out packets being dropped if we have
multiple workers (handoff node enabled).
To resolve this a new node was added (nat-pre-in2out-output) to fill
arc_next in single worker case and multiple worker case is already
handled by handoff node.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I9dfba68f00164d2d5ab867224871811bef4411ed
device pool my grow during suspemd which will cause crash in avf process
after it exits from suspend.
Type: fix
Change-Id: I51fec90088c909cfbaaca6c245272a28c0827ca0
Signed-off-by: Damjan Marion <damarion@cisco.com>
It may happen that process node is suspended while it waits for response
from adminq and during that time CLI or API process can call
avf_delete_if. When avf process node resumes, it may happen that device
is not there anymeore.
This patch delegates interface deletion to process node, so CLI/API
process just sends signal instead of deleting device instance itself.
Type: fix
Change-Id: I7f12e12df3071650f6e60ad7eb5af23b7acfe335
Signed-off-by: Damjan Marion <damarion@cisco.com>
Type: fix
Static analysis identified a possible null pointer dereference. It
was introduced by a recent patch which expanded the DMAC comparison
on inbound packets on a BVI interface to include any secondary MAC
addresses which were added to an interface.
Check if the pointer is null before dereferencing.
Change-Id: Ic2afe2b062eda32977e05bf3f98d82c1fe64620c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
- make sure everything is freed on cleanup
- reuse already allocated vectors where possible
Type: fix
Change-Id: Ibd8da1edb37126522dc2d525596521d32dceb73a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
vpp-20.05 on up-to-date Centos 7.8 host with enforcing SELinux fails to
create a host-interface due to two missing SELinux-permissions:
vpp_t self:packet_socket { read write }
This simple patch adds these two permissions. Tested successfully on
local installation.
The steps to reproduce:
$ ip link add vpeer-host type veth peer name vpeer-vpp
vpp# create host-interface name vpeer-vpp
create host-interface: Permission denied (errno 13)
[...]
$ semodule -i vpp-packet-socket.pp
vpp# create host-interface name vpeer-vpp
host-vpeer-vpp
Type: fix
Ticket: VPP-1931
Change-Id: I2b3d92b27b9a9f26aa1c85af2946b15e83e27944
Signed-off-by: Martin Millnert <martin@millnert.se>
VAT crashes when the one_add_del_local_eid api is invoked with mac
address as eid.
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I29e246f6cad4b350fec52d54e94dbed586d488c4
With packet trace on, VPP crashes when an arp packet arrives. This patch
fixes the crash and also ensures that the packet trace displays the eid
info.
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Iaad09a5e2b33e931ab9bd7bc3d4573b5ed5e4bfd
Type: fix
VRRP cannot be used on a BVI interface currently because packets sent
to the virtual mac address of the VR fail the destination mac check in
l2_to_bvi().
Apparently people want to use VRRP on BVI interfaces, so update the
check in l2_to_bvi() so that it will check any secondary mac addresses
which have been added to the ethernet interface if the destination mac
address does not match the primary mac address for the interface.
An equivalent check is already done in ethernet_input_inline() for L3
interfaces which are in promiscuous mode.
Change-Id: I7c5bf624dafda8744fea236c704e8e17e5f53b35
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
also, remove a duplicate 17.01.1 section and wrong page tag for 20.09
Change-Id: Ia2cc77faa75cccab38972ad46517762cb7456466
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Type: feature
This patch updateds cryptodev engine uses new DPDK Cryptodev
API planned to be upstreamed in DPDK 20.11.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrX.bronowski@intel.com>
Change-Id: I8dd1a8ac643f1e952deb787e466b76ea7aa5f420
This patch adds the RSS steering queues set interface, and it's
implementation in DPDK device:
/* Interface to set rss queues of the interface */
typedef clib_error_t *(vnet_interface_rss_queues_set_t)
(struct vnet_main_t * vnm, struct vnet_hw_interface_t * hi,
clib_bitmap_t *bitmap);
This patch also introduces a command line to set the RSS queues:
set interface rss queues <interface> <list <queue-list>>
To display the rss queues, use "show hardware-interfaces"
Below is the example to configure rss queues for interface Gig0:
vpp# set interface rss queues Gig0 list 0,2,4-7
vpp# show hardware-interfaces brief
Name Idx Link Hardware
VirtualFunctionEthernet18/1/0 1 down VirtualFunctionEthernet18/1/0
Link speed: unknown
RSS queues: 0 2 4 5 6 7
local0 0 down local0
Link speed: unknown
vpp#
Users can also configure the rss queues on a dpdk interface in
startup.conf:
dpdk {
dev 0000:18:01.0 {
rss-queues 0,2,5-7
}
}
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1835595a1c54016a84eabee9fd62ce137935385d
Dave Barach