This patch provides unit tests for libmemif written in Unity
Type: test
Signed-off-by: Daniel Béreš <dberes@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I19116def6e6d28efd5f460c93911245474a11321
Ensure alignment between the Intel IPsec-mb library on the
host and VPP targets.If the version of Intel ipsec-mb on the
host is misaligned with the targets,terminate the compilation
process to prevent potential library linkage issues.
Type: fix
Change-Id: I38864115d59ae09fb5556ad4a29e884ebace8155
Signed-off-by: Ranjan Raj <ranjanx.raj@intel.com>
Signal when consuming a batch of netlink messages, in order to inhibit
lcp_sync from generating new netlink messages. This avoids link up/down
state changess from triggering an infinite loop.
Do this in the regular case of nl_route_process_msgs()
and in the special case of re-synchronizing in lcp_nl_recv_dump_replies().
Type: fix
Change-Id: I419d3f9aa350c119b3778b644c65165cb4cc1bef
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Add an urpf_interface_dump() API call, with optional sw_if_index.
If either a mode or a table is specified in any given interface
address family and direction, return it in a list, otherwise omit
it.
TESTED:
create loopback interface instance 0
create loopback interface instance 1
create loopback interface instance 2
create loopback interface instance 3
ip6 table add 8298
set urpf ip4 rx loose loop1
set urpf ip6 tx off loop2 table 8298
API call urpf_interface_dump(sw_if_index=~1) returns:
[
urpf_interface_details(_0=658, context=2, sw_if_index=2, is_rx=True, mode=<vl_api_urpf_mode_t.URPF_API_MODE_LOOSE: 1>, af=<vl_api_address_family_t.ADDRESS_IP4: 0>, table_id=0),
urpf_interface_details(_0=658, context=2, sw_if_index=3, is_rx=False, mode=<vl_api_urpf_mode_t.URPF_API_MODE_OFF: 0>, af=<vl_api_address_family_t.ADDRESS_IP6: 1>, table_id=8298)
]
Type: improvement
Change-Id: I1ded5c445dc07dab73ea41b817b5827b72ca79d4
Signed-off-by: pim@ipng.nl
One less pointer chase when accepting sessions.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I20dbb21d15d4a703f76e3b12f04a6f5b5d2a3cd8
Adds support for connectionless listener port reuse. Until now, cl
listeners had fifos allocated to them and therefore only one app worker
could ever listen, i.e., a session cannot have multiple fifos.
To circumvent the limitation, this separates the fifos from the listener
by allocating new cl sessions for each app worker that reuses the app
listener. Flows are hashed to app worker cl sessions but, for now, this
is not a consistent/fixed hash.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic6533cd47f2765903669f88c288bd592fb17a19e
Currently, when flowprobe_export_send() calls vlib_time_now(), a pointer
to the main thread's vlib_main_t is always passed (the one cached in
flow_report_main). However, that code can also be executed from a worker
thread. And passing a pointer to the main thread's vlib_main_t to
vlib_time_now() from a worker thread may cause time synchronization
issues. Also, running a debug binary will cause an assertion failure in
vlib_time_now() in this case.
With this fix, flowprobe_export_send() passes the pointer to the current
thread's vlib_main_t to vlib_time_how().
This doesn't allow to remove @tag_fixme_vpp_workers from the unit tests
yet as they will be failing for other multi-worker related problems.
Type: fix
Change-Id: Ia35e3a4176777b88cf8ca8af8af7c42c495cbc6a
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Fix minor differences between Ubuntu 18.04 LTS and Ubuntu 22.04 LTS when
using the scheme to test new code.
Type: docs
Change-Id: I5810b6f3d76d8d98fa764b61828b1ca32507bd91
Signed-off-by: Dave Barach <dave@barachs.net>
Quic does not seed random value, so if the plugin is loaded
separately RAND_bytes will fail.
Type: fix
Change-Id: If600cbde1fef30afb6316fc1a355261b008c3191
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Incase the ack for the fin is lost twice or want to dup ack
packets with incorrect ack/seq # at different times and
session state is already closed, this fifo event is set for
the first ack that went out and prevents queuing of further events.
Type: fix
Change-Id: I102019fca26918a51e055a751db7209011bd43ad
Signed-off-by: emmanuel <emmanuelscaria11@gmail.com>
Use lowercased hex in uuid in sysfs/vmbus names
Type: fix
Change-Id: Ic4b7b995441723dc1b29ff8a75346cc8ba7f85f1
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
- gmake set CC=cc as the default therefore the test/test-debug
makefile targets will build using gcc (cc == gcc for debian/ubuntu
distros) unless set explicitly to clang due to use of 'CC=$(CC)' in
test macro.
Note: the CI builds vpp images prior to running 'make test', thus
the CI does test vpp built using clang. This basically makes local
runs of 'make test' build using clang as well.
Type: make
Change-Id: I7221098c200be23b53bb616e41a42a6d65a03699
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
This patch allows the formatting of deleted Load-balancer
objects. This is needed in the case a trace references a DPO
that went away in the interim.
Type: improvement
Change-Id: I6d67519b8d62f69aafde3c8fe3065bc85a7adbde
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
In the API there is a difference between enum and enumflags.
The latter one allowing multiple set entitires, while enum
only allows one.
Type: fix
Change-Id: I5db88c15c85fc6c7130b7b35febcd1ea02ef8f76
Signed-off-by: Ole Troan <otroan@employees.org>
This merge request adds the feature to manipulate localsids and policies for SRv6 mobile via API.
Type: feature
Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com>
Change-Id: Ibb46bf71ae1d9d4591ce2c8ccf66f520887dad70
The _v3 was not handling endianness on flags (e.g. mode).
Marking _v3 as deprecated, but keeping it
as there might be users who learned to preprocess their flag values.
+ Also, format PCI product_name as a vector, not a string.
Type: fix
Change-Id: I50c4b44f3570f02518dbd9a43239c1a37612d24a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
If ho cleans up on first worker before owner of established session
receives connected notification, the ho session is prematurely cleaned
up.
Wait for established ctx to be allocated before freeing ho.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icf707e5d8c62a288a49d078460d2ada3b5c41b0e
Even if the device name is specified in the startup config it may
be appended to if the device is a switch domain member. This leads
to unexpected device naming if an explicit device name was requested.
Type: fix
Change-Id: Ib56b4ac41c17008db55dc69497721e3cb7d540c1
Signed-off-by: Peter Morrow <pdmorrow@gmail.com>
This patch introduces a fix for correcting a counter for the number
of processed vectors in the crypto-dispatch node.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Icaeb925a352a9ac766652f43c4e752f6727cdeb9
Use the correct string type for vlib_get_node_by_name. Found by ASAN.
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.com>
Change-Id: I679d27050487e013e3320a4c558d78fa60c5e98a
This patch prevents the sw interfaces format
function to fail when the interface was deleted.
It also prints the swifindex alongside the 'DELETED'
keyword.
Printing deleted swifindex should not happen, but it is still
helpful to have these safeguards for troubleshooting in the case
invariants get corrupted (e.g. fib entry refcounts, ...)
Type: improvement
Change-Id: I66711049db2eebe0ad17e37c3a260ac81d1e5134
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Daniel Béreš