wip

* [Keyboard] Add VIA support to Mysterium

* [Keyboard] Add VIA support to Discipad

Makefile

@@ -557,55 +557,38 @@ endef
 # Let's match everything, we handle all the rule parsing ourselves
 .PHONY: %
 %:
-	# Check if we have the CMP tool installed
-	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
-	# Ensure that python3 is installed. This check can be removed after python is used in more places.
-	if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
-	# Check if the submodules are dirty, and display a warning if they are
-ifndef SKIP_GIT
-	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi
-	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 50 --init lib/chibios-contrib; fi
-	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 50 --init lib/ugfx; fi
-	if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 50 --init lib/lufa; fi
-	git submodule status --recursive 2>/dev/null | \
-	while IFS= read -r x; do \
-		case "$$x" in \
-			\ *) ;; \
-			*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
-		esac \
-	done
-endif
-	rm -f $(ERROR_FILE) > /dev/null 2>&1
-	$(eval $(call PARSE_RULE,$@))
-	$(eval $(call SET_SILENT_MODE))
-	# Run all the commands in the same shell, notice the + at the first line
-	# it has to be there to allow parallel execution of the submake
-	# This always tries to compile everything, even if error occurs in the middle
-	# But we return the error code at the end, to trigger travis failures
-	# The sort at this point is to remove duplicates
-	$(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
-	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
-	$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
-	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
+#	# Check if we have the CMP tool installed
+#	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
+#	# Ensure that python3 is installed. This check can be removed after python is used in more places.
+#	if ! python3 --version 1> /dev/null 2>&1; then printf "$(MSG_PYTHON_MISSING)"; fi
+#	# Check if the submodules are dirty, and display a warning if they are
+#ifndef SKIP_GIT
+#	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi
+#	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 50 --init lib/chibios-contrib; fi
+#	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 50 --init lib/ugfx; fi
+#	if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 50 --init lib/lufa; fi
+#	git submodule status --recursive 2>/dev/null | \
+#	while IFS= read -r x; do \
+#		case "$$x" in \
+#			\ *) ;; \
+#			*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
+#		esac \
+#	done
+#endif
+#	rm -f $(ERROR_FILE) > /dev/null 2>&1
+#	$(eval $(call PARSE_RULE,$@))
+#	$(eval $(call SET_SILENT_MODE))
+#	# Run all the commands in the same shell, notice the + at the first line
+#	# it has to be there to allow parallel execution of the submake
+#	# This always tries to compile everything, even if error occurs in the middle
+#	# But we return the error code at the end, to trigger travis failures
+#	# The sort at this point is to remove duplicates
+#	$(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
+#	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
+#	$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
+#	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
-# These no longer work because of the colon system
-
-# All should compile everything
-# .PHONY: all
-# all: all-keyboards test-all
-
-# Define some shortcuts, mostly for compatibility with the old syntax
-# .PHONY: all-keyboards
-# all-keyboards: all\:all\:all
-
-# .PHONY: all-keyboards-defaults
-# all-keyboards-defaults: all\:default
-
-# .PHONY: test
-# test: test-all
-
-# .PHONY: test-clean
-# test-clean: test-all-clean
+	bin/qmk makehandler $@
 
 lib/%:
 	git submodule sync $?

docs/ja/feature_command.md

@@ -0,0 +1,56 @@
+# コマンド
+
+<!---
+  original document: 0.8.94:docs/feature_command.md
+  git diff 0.8.94 HEAD -- docs/feature_command.md | cat
+-->
+
+コマンド(旧称:マジック)は、ファームウェアを書き込んだり、[ブートマジック](ja/feature_bootmagic.md)を使うためにプラグを抜いたりすることなくキーボードの挙動を変更する方法です。この機能と[ブートマジックキーコード](feature_bootmagic.md#keycodes)には多くの重複があります。可能な限り、コマンドでは無くブートマジックキーコードの機能を使うことをお勧めします。
+
+一部のキーボードではコマンドがデフォルトで無効になっています。その場合、`rules.mk` 内で明示的に有効にする必要があります:
+
+```make
+COMMAND_ENABLE = yes
+```
+
+## 使用法
+
+コマンドを使うには、`IS_COMMAND()` マクロで定義されたキーの組み合わせを押し続けます。デフォルトでは、これは「左Shift + 右Shift」です。次に、目的のコマンドに対応するキーを押します。例えば、現在の QMK バージョンを QMK Toolbox コンソールに出力するには、「左Shift + 右Shift + `V`」を押します。
+
+## 設定
+
+コマンドのためのキーの割り当てを変更したい場合は、キーボードあるいはキーマップレベルのどちらかで、`config.h` にこれらを `#define` します。ここで割り当てる全てのキーコードは `KC_` 接頭辞を省略する必要があります。
+
+| 定義 | デフォルト | 説明 |
+|------------------------------------|--------------------------------|------------------------------------------------|
+| `IS_COMMAND()` | `(get_mods() == MOD_MASK_SHIFT)` | コマンドをアクティブにするキーの組み合わせ |
+| `MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` | `true` | ファンクション行を使ってデフォルトレイヤーを設定 |
+| `MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` | `true` | 数字キーでデフォルトレイヤーを設定 |
+| `MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM` | `false` | `MAGIC_KEY_LAYER0..9` を使ってデフォルトレイヤーを設定 |
+| `MAGIC_KEY_DEBUG` | `D` | シリアルを介するデバッグの切り替え |
+| `MAGIC_KEY_DEBUG_MATRIX` | `X` | キーマトリックスのデバッグの切り替え |
+| `MAGIC_KEY_DEBUG_KBD` | `K` | キーボードのデバッグの切り替え |
+| `MAGIC_KEY_DEBUG_MOUSE` | `M` | マウスのデバッグの切り替え |
+| `MAGIC_KEY_CONSOLE` | `C` | コマンドコンソールを有効にする |
+| `MAGIC_KEY_VERSION` | `V` | コンソールに実行中の QMK バージョンを出力 |
+| `MAGIC_KEY_STATUS` | `S` | コンソールに現在のキーボードの状態を出力 |
+| `MAGIC_KEY_HELP` | `H` | コンソールにコマンドのヘルプを出力 |
+| `MAGIC_KEY_HELP_ALT` | `SLASH` | コンソールにコマンドのヘルプを出力 (代替) |
+| `MAGIC_KEY_LAYER0` | `0` | レイヤー 0 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER0_ALT` | `GRAVE` | レイヤー 0 をデフォルトレイヤーにする (代替) |
+| `MAGIC_KEY_LAYER1` | `1` | レイヤー 1 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER2` | `2` | レイヤー 2 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER3` | `3` | レイヤー 3 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER4` | `4` | レイヤー 4 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER5` | `5` | レイヤー 5 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER6` | `6` | レイヤー 6 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER7` | `7` | レイヤー 7 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER8` | `8` | レイヤー 8 をデフォルトレイヤーにする |
+| `MAGIC_KEY_LAYER9` | `9` | レイヤー 9 をデフォルトレイヤーにする |
+| `MAGIC_KEY_BOOTLOADER` | `B` | ブートローダにジャンプする |
+| `MAGIC_KEY_BOOTLOADER_ALT` | `ESC` | ブートローダにジャンプする (代替) |
+| `MAGIC_KEY_LOCK` | `CAPS` | 何も入力できないようにキーボードをロック |
+| `MAGIC_KEY_EEPROM` | `E` | 保存された EEPROM 設定をコンソールに出力 |
+| `MAGIC_KEY_EEPROM_CLEAR` | `BSPACE` | EEPROM をクリア |
+| `MAGIC_KEY_NKRO` | `N` | N キーロールオーバー (NKRO) の有効・無効を切り替え |
+| `MAGIC_KEY_SLEEP_LED` | `Z` | コンピュータがスリープの時に LED を切り替え |

docs/ja/feature_encoders.md

@@ -0,0 +1,81 @@
+# エンコーダ
+
+<!---
+  original document: 0.8.123:docs/feature_encoders.md
+  git diff 0.8.123 HEAD -- docs/feature_encoders.md | cat
+-->
+
+以下を `rules.mk` に追加することで基本的なエンコーダがサポートされます:
+
+```make
+ENCODER_ENABLE = yes
+```
+
+さらに、以下を `config.h` に追加します:
+
+```c
+#define ENCODERS_PAD_A { B12 }
+#define ENCODERS_PAD_B { B13 }
+```
+
+各 PAD_A/B 変数は配列を定義するため、複数のエンコーダを定義することができます。例えば:
+
+```c
+#define ENCODERS_PAD_A { encoder1a, encoder2a }
+#define ENCODERS_PAD_B { encoder1b, encoder2b }
+```
+
+エンコーダの時計回りの方向が間違っている場合は、A と B のパッド定義を交換することができます。define を使って逆にすることもできます:
+
+```c
+#define ENCODER_DIRECTION_FLIP
+```
+
+さらに、解像度を同じファイルで指定することができます (デフォルトかつお勧めは4):
+
+```c
+#define ENCODER_RESOLUTION 4
+```
+
+## 分割キーボード
+
+分割キーボードのそれぞれの側のエンコーダに異なるピン配列を使っている場合、右側のピン配列を以下のように定義することができます:
+
+```c
+#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a }
+#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b }
+```
+
+## コールバック
+
+コールバック関数を `<keyboard>.c` に記述することができます:
+
+```c
+void encoder_update_kb(uint8_t index, bool clockwise) {
+    encoder_update_user(index, clockwise);
+}
+```
+
+あるいは `keymap.c` に記述することもできます:
+
+```c
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+        } else if (index == 1) { /* Second encoder */  
+        if (clockwise) {
+            tap_code(KC_DOWN);
+        } else {
+            tap_code(KC_UP);
+        }
+    }
+}
+```
+
+## ハードウェア
+
+エンコーダの A と B の線は MCU に直接配線し、C/common 線はグランドに配線する必要があります。

docs/syllabus.md

@@ -4,7 +4,7 @@ This page helps you build up your QMK knowledge by introducing the basics first
 
 # Beginning Topics
 
-If you read nothing else you should read the documents in this section. After reading the [Tutorial](newbs.md) you should be able to create a basic keymap, complie it, and flash it to your keyboard. The remaining documents will flesh out your knowledge of these basics.
+If you read nothing else you should read the documents in this section. After reading the [Tutorial](newbs.md) you should be able to create a basic keymap, compile it, and flash it to your keyboard. The remaining documents will flesh out your knowledge of these basics.
 
 * **Learn How To Use QMK Tools**
     * [Tutorial](newbs.md)
@@ -20,7 +20,7 @@ If you read nothing else you should read the documents in this section. After re
 
 # Intermediate Topics
 
-These topics start dig into some of the features that QMK supports. You don't have to read all of these documents, but some of the documents in the Advanced Topics section won't make sense if you skip over some of these.
+These topics start to dig into some of the features that QMK supports. You don't have to read all of these documents, but some of the documents in the Advanced Topics section won't make sense if you skip over some of these.
 
 * **Learn How To Configure Features**
     <!-- * Configuration Overview  FIXME(skullydazed/anyone): write this document -->
@@ -62,9 +62,9 @@ Everything below here requires a lot of foundational knowledge. Besides being ab
     * [Pointing Devices](feature_pointing_device.md)
 * **Core Development**
     * [Coding Conventions](coding_conventions_c.md)
-    * [Compatible Microcontrolers](compatible_microcontrollers.md)
+    * [Compatible Microcontrollers](compatible_microcontrollers.md)
     * [Custom Matrix](custom_matrix.md)
-    * [Understandnig QMK](understanding_qmk.md)
+    * [Understanding QMK](understanding_qmk.md)
 * **CLI Development**
     * [Coding Conventions](coding_conventions_python.md)
     * [CLI Development Overview](cli_development.md)

docs/tap_hold.md

@@ -12,7 +12,7 @@ As of [PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/), there is a new
 #define PERMISSIVE_HOLD
 ```
 
-This makes tap and hold keys (like Mod Tap) work better for fast typist, or for high `TAPPING_TERM` settings. 
+This makes tap and hold keys (like Mod Tap) work better for fast typists, or for high `TAPPING_TERM` settings. 
 
 If you press a Mod Tap key, tap another key (press and release) and then release the Mod Tap key, all within the tapping term, it will output the "tapping" function for both keys.
 
@@ -35,7 +35,7 @@ To enable this setting, add this to your `config.h`:
 #define IGNORE_MOD_TAP_INTERRUPT
 ```
 
-Similar to Permissive Hold, this alters how the firmware processes input for fast typist. If you press a Mod Tap key, press another key, release the Mod Tap key, and then release the normal key, it would normally output the "tapping" function for both keys. This may not be desirable for rolling combo keys. 
+Similar to Permissive Hold, this alters how the firmware processes inputs for fast typists. If you press a Mod Tap key, press another key, release the Mod Tap key, and then release the normal key, it would normally output the "tapping" function for both keys. This may not be desirable for rolling combo keys. 
 
 Setting `Ignore Mod Tap Interrupt` requires  holding both keys for the `TAPPING_TERM` to trigger the hold function (the mod).
 

keyboards/abacus/config.h

@@ -105,10 +105,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
+
 /*
  * MIDI options
  */

keyboards/ai03/orbit_x/config.h

@@ -165,10 +165,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0

keyboards/allison/config.h

@@ -192,10 +192,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
+
 /*
  * MIDI options
  */

keyboards/allison_numpad/config.h

@@ -192,10 +192,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
+
 /*
  * MIDI options
  */

keyboards/atreus/keymaps/khitsule/keymap.c

@@ -2,20 +2,19 @@
 
 #include QMK_KEYBOARD_H
 
-#define ALPH 0
-#define LOWR 1
-#define RAIS 2
-
-// enum layers {
-//   ALPH, //alpha qwerty
-//   LOWR, //layer 1: nav and functions
-//   RAIS //layer 2: numpad and symbols
-// };
+enum layers {
+    ALPH,
+    GAME,
+    LOWR,
+    RAIS,
+    ADJS
+};
 
 // define any macros here to keep keymap clean and readable
 
 #define KM_DLEFT LGUI(LCTL(KC_LEFT))
 #define KM_DRIGHT LGUI(LCTL(KC_RIGHT))
+#define TSKMGR LCTL(LSFT(KC_ESC))
 
 #define tap_mod_macro(record, mod, macro) ( ((record)->event.pressed) ? \
      ( ((record)->tap.count <= 0 || (record)->tap.interrupted) ? MACRO(D(mod), END) : MACRO_NONE ) : \
@@ -28,20 +27,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_Q,    KC_W,     KC_E,     KC_R,           KC_T,                                               KC_Y,              KC_U,     KC_I,     KC_O,     KC_P,
     KC_A,    KC_S,     KC_D,     KC_F,           KC_G,                                               KC_H,              KC_J,     KC_K,     KC_L,     KC_SCLN,
     KC_Z,    KC_X,     KC_C,     KC_V,           KC_B,                                               KC_N,              KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,
-    KC_ESC,  KC_TRNS,  KC_TRNS,  ALT_T(KC_ENT),  LT(LOWR, KC_TAB),  CTL_T(KC_SPC),  SFT_T(KC_BSPC),  LT(RAIS, KC_DEL),  KC_LGUI,  KC_TRNS,  KC_QUOT,  KC_MINUS
+    KC_ESC,  KC_TRNS,  KC_TRNS,  ALT_T(KC_ENT),  LT(LOWR, KC_TAB),  CTL_T(KC_SPC),  SFT_T(KC_BSPC),  LT(RAIS, KC_DEL),  KC_LGUI,  TO(GAME),  KC_QUOT,  KC_MINUS
+  ),
+  [GAME] = LAYOUT(
+    KC_Q,    KC_W,     KC_E,     KC_R,      KC_T,                        KC_Y,    KC_U,     KC_I,     KC_O,     KC_P,
+    KC_A,    KC_S,     KC_D,     KC_F,      KC_G,                           KC_H,    KC_J,     KC_K,     KC_L,     KC_SCLN,
+    KC_Z,    KC_X,     KC_C,     KC_V,      KC_B,                                  KC_N,    KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,
+    KC_ESC,  KC_TRNS,  KC_ENT,   KC_LALT,   KC_TAB,  KC_LCTL,  KC_LSFT,  KC_DEL,  KC_LGUI,  TO(ALPH),  KC_QUOT,  KC_MINUS
   ),
   [LOWR] = LAYOUT(
     KC_PSCR,   KC_HOME,    KC_UP,         KC_END,   KC_TRNS,                      KC_LPRN,        KC_F7,    KC_F8,    KC_F9,    KC_RPRN,
     KC_VOLU,   KC_LEFT,    KC_DOWN,       KC_RIGHT, KC_PGUP,                      KC_LBRC,        KC_F4,    KC_F5,    KC_F6,    KC_RBRC,
     KC_VOLD,   KC_MPRV,    KC_MPLY,       KC_MNXT,  KC_PGDN,                      LSFT(KC_LBRC),  KC_F1,    KC_F2,    KC_F3,    LSFT(KC_RBRC),
-    KM_DLEFT,  KM_DRIGHT,  LALT(KC_TAB),  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,        KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS
+    KM_DLEFT,  KM_DRIGHT,  LALT(KC_TAB),  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  MO(ADJS),        KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS
   ),
   [RAIS] = LAYOUT(
     KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,     KC_PERC,                        KC_TRNS,   KC_7,     KC_8,  KC_9,    KC_TRNS,
     KC_CIRC,  KC_AMPR,  KC_GRV,   KC_TILD,    KC_PIPE,                        KC_PLUS,   KC_4,     KC_5,  KC_6,    KC_ASTR,
     KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,    KC_BSLS,                        KC_MINUS,  KC_1,     KC_2,  KC_3,    KC_SLASH,
-    RESET,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,  KC_0,  KC_DOT,  KC_EQL
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  MO(ADJS),  KC_TRNS,  KC_TRNS,     KC_TRNS,   KC_TRNS,  KC_0,  KC_DOT,  KC_EQL
   ),
+  [ADJS] = LAYOUT(
+    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,                        KC_F6,    KC_F7,     KC_F8,     KC_F9,   KC_F10,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                      TSKMGR,   KC_TRNS,   KC_TRNS,   KC_F11,  KC_F12,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                      KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS,
+    RESET,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS, KC_TRNS
+  )
 };
 
 const uint16_t PROGMEM fn_actions[] = {

keyboards/bat43/config.h

@@ -192,10 +192,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
+
 /*
  * MIDI options
  */

keyboards/ckeys/washington/config.h

@@ -193,10 +193,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
+
 /*
  * MIDI options
  */

keyboards/coseyfannitutti/discipad/config.h

@@ -19,7 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x6B62
 #define PRODUCT_ID      0x1769
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    coseyfannitutti
@@ -243,7 +243,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 */
 
-/* Bootmagic Lite key configuration
+/* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0
-*/
+

keyboards/coseyfannitutti/discipad/keymaps/via/keymap.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_numpad_5x4(
+      KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+      KC_P7,   KC_P8,   KC_P9,
+      KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+      KC_P1,   KC_P2,   KC_P3,
+      KC_P0,   KC_PDOT,          KC_PENT  ),
+  [1] = LAYOUT_numpad_5x4(
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS,          KC_TRNS  ),
+  [2] = LAYOUT_numpad_5x4(
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS,          KC_TRNS  ),
+  [3] = LAYOUT_numpad_5x4(
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS,          KC_TRNS  ),
+};

keyboards/coseyfannitutti/discipad/keymaps/via/rules.mk

@@ -0,0 +1,4 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
+EXTRAKEY_ENABLE = no
+MOUSEKEY_ENABLE = no

keyboards/coseyfannitutti/mysterium/config.h

@@ -18,7 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x6B62
 #define PRODUCT_ID      0x8769
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    coseyfannitutti
@@ -238,3 +238,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0

keyboards/coseyfannitutti/mysterium/keymaps/via/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_tkl_ansi(
+      KC_GESC,          KC_F1,   KC_F2,   KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,   KC_F11,  KC_F12,   KC_PSCR,  KC_SLCK, KC_PAUS,
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC,  KC_INS,   KC_HOME, KC_PGUP,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,  KC_DEL,   KC_END,  KC_PGDN,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,
+      KC_LSFT,          KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,                     KC_UP,
+      KC_LCTL, KC_LGUI, KC_LALT,                          KC_SPC,                 KC_RALT, KC_RGUI, MO(1),  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RIGHT),
+
+  [1] = LAYOUT_tkl_ansi(
+      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,
+      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_VOLU,
+      KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,            KC_TRNS, KC_VOLD, KC_TRNS),
+
+  [2] = LAYOUT_tkl_ansi(
+      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,
+      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS),
+
+  [3] = LAYOUT_tkl_ansi(
+      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,
+      KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,                     KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS,                          KC_TRNS,                KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,            KC_TRNS, KC_TRNS, KC_TRNS)
+};

keyboards/coseyfannitutti/mysterium/keymaps/via/rules.mk

@@ -0,0 +1,4 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
+EXTRAKEY_ENABLE = no
+MOUSEKEY_ENABLE = no

keyboards/cospad/config.h

@@ -193,10 +193,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
+
 /*
  * MIDI options
  */

keyboards/crkbd/config.h

@@ -24,11 +24,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define USE_I2C
 #define USE_SERIAL
 
-#ifdef USE_Link_Time_Optimization
-  // LTO has issues with macros (action_get_macro) and "functions" (fn_actions),
-  //  so just disable them
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-
-  #define DISABLE_LEADER
-#endif // USE_Link_Time_Optimization

keyboards/daisy/config.h

@@ -192,10 +192,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
+
 /*
  * MIDI options
  */

keyboards/dztech/dz60rgb/v1/config.h

@@ -33,10 +33,8 @@
 #define DEBOUNCE 3
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects

keyboards/dztech/dz60rgb/v2/config.h

@@ -33,10 +33,8 @@
 #define DEBOUNCE 3
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects

keyboards/dztech/dz60rgb_ansi/v1/config.h

@@ -33,10 +33,8 @@
 #define DEBOUNCE 3
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects

keyboards/dztech/dz60rgb_ansi/v2/config.h

@@ -33,10 +33,8 @@
 #define DEBOUNCE 3
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects

keyboards/dztech/dz60rgb_wkl/v1/config.h

@@ -33,10 +33,8 @@
 #define DEBOUNCE 3
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects

keyboards/dztech/dz60rgb_wkl/v2/config.h

@@ -33,10 +33,8 @@
 #define DEBOUNCE 3
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects

keyboards/dztech/dz65rgb/v1/config.h

@@ -29,10 +29,8 @@
 #define DIODE_DIRECTION COL2ROW
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_LED_PROCESS_LIMIT 4

keyboards/dztech/dz65rgb/v2/config.h

@@ -29,10 +29,8 @@
 #define DIODE_DIRECTION COL2ROW
 
 /* disable these deprecated features by default */
-#ifndef LINK_TIME_OPTIMIZATION_ENABLE
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-#endif
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_LED_PROCESS_LIMIT 4

keyboards/ergodash/rev1/keymaps/333fred/config.h

@@ -1,7 +1,6 @@
 #pragma once
 
 #include QMK_KEYBOARD_CONFIG_H
-#include "333fred_config.h"
 
 #define USE_SERIAL
 #define MASTER_LEFT