Older GCC compilers (earlier than 4.6) do not support the diagnostic
pragmas that push and pop the warning levels. This change just disables
the warnings we need to for third party libraries and leaves them off.
This means you might miss some legit warnings on older compilers, but
most developers use newer compilers anyway, and the push/pop should
still work there.
Scatter in worklets
Add the functionality to perform a scatter operation from input to output in a worklet invocation. This allows you to, for example, specify a variable amount of outputs generated for each input.
See merge request !221
This has been requested on the mailing list to make it easier to
interpolate integer vectors.
There are a couple of downsides to this addition. First, it implicitly
casts doubles back to whatever the vector type is, which can cause a
loss of precision. Second, it makes it more likely to get overload
errors when multiplying with Vec. In particular, the operator to cast
Vec of size 1 to the component class had to be removed.
CUDA default constructors, destructors, and assignment operators
Several classes exclusively work in the control environment. However, CUDA likes to add __device__ to constructors, destructors, and assignment operators it automatically creates. This in turn causes warnings about the __device__ function using host-only classes (like boost::shared_ptr). Solve this problem by adding explicit methods for all of these.
See merge request !245
This now allows for even more efficient construction of uniform point
coordinates when running under the 3d scheduler, since we don't need to go
from 3d index to flat index to 3d index, instead we stay in 3d index
Previously, all Fetch objects received an Invocation object in their
Load and Store methods. The point of this was that it allowed the Fetch
to get data from any of the execution objects. However, every Fetch
either just got data directly from its associated execution object or
else used a secondary execution object (the input domain) to get indices
into their own execution object.
This left two potential areas for improvement. First, pulling data out
of the Invocation object was unnecessarily complicated. It would be much
nicer to get data directly from the associated execution object. Second,
when getting index information from the input domain, it was often the
case that extra computations were necessary (particularly on structured
cell sets). There was no way to share the index information among
Fetches, and therefore the computations were replicated.
This change removes the Invocation from the Fetch Load and Store.
Instead, it passes the associated execution object and a new object type
called the ThreadIndices. The ThreadIndices are customized for the input
domain and therefore have all the information needed for a redirected
lookup. It is also a thread-local object so it can cache computed
indices and save on computation time.
Xcode 7 warnings
The XCode 7 compiler has a new warning for unused typedefs. The Boost code we use has some instances where this warning gets issued. Suppress these warnings.
See merge request !199
This is to be used in place of BOOST_STATIC_ASSERT so that we can
control its implementation.
The implementation is designed to fix the issue where the latest XCode
clang compiler gives a warning about a unused typedefs when the boost
static assert is used within a function. (This warning also happens when
using the C++11 static_assert keyword.) You can suppress this warning
with _Pragma commands, but _Pragma commands inside a block is not
supported in GCC. The implementation of VTKM_STATIC_ASSERT handles all
current cases.
The recently added pragma to suppress warnings about unused local
typedefs caused lots of dashboard failures because many GCC and clang
compiler do not have this warning so did not recognized the pragma to
suppress it. Now only use the pragma on clang compilers with a large
enough version.
I also discovered that the check for VTKM_CLANG was wrong (at least for
the most modern versions of XCode). Fixed that as well as some uses of
VTKM_CLANG that were wrong.
XCode 7 added a warning for unused typedefs. VTK-m proper does not have
any instances of this, but there are several cases in the Boost code
that we are using. Add an exception to the third party pragmas to
supporess this warning.
In the special case where you are loading the point coordinates for a
structured grid in a point to cell map (an important use case), create a
VecRectilinearPointCoordinates rather than build a Vec of the values.
This will activate the cell specalizations in previous commits.
These changes also added some flat-to-logical index conversion and vice
versa in ConnectivityStructuredInternals. This change also fixed a bug
in getting cells attached to points in 2D grids. (Actually, technically
someone else fixed it and checked it in first. The changes were merged
during a rebase.)
I also added a specalization to Vec for 1D that implicitly converts
between the 1D Vec and the component. This can be convenient when
templating on the Vec length.
adding cell-to-point topology support and worklet
This adds code to support a cell-to-point topological mapping worklet.
For explicit cell set, there is code to calculate a cell-to-point topology from the canonical point-to-cell topology. (It is not parallelized at this point.) Most of the required code for structured grids was already in place.
See merge request !154
These cell types are inherited from VTK, but they are basically the same
as quad and hexahedron, respectively. The only useful difference is that
pixel and voxel are supposed to be axis aligned, but you cannot
determine that by the cell shape alone (at least not just from the cell
set).
A big issue with these is that their indexing is different that of quad
and hex. The development team had a long discussion about the benefits
of the alternate indexing, but after consulting with Berk Geveci and
Will Schroder from the VTK team, that indexing is not really taken
advantage of at the cell level. Thus, it is really just a nuisance in
VTK-m.
When getting cell indices in a cell to point structured connectivity, it
was previously returning a vtkm::Vec of the maximum size and setting
invalid indices to -1. This is changed to vtkm::VecVariable, which will
reflect the actual number of indices.
I thought I made this change a while ago, but I guess I missed it.
Previously, when you requested a CellShape in the ExecutionSignature,
you just got an ID stored in a vtkm::IdComponent. This change returns a
cell shape tag of the appropriate type (or generic if the type is not
known at compile time). This will allow functions called from the
worklet to specialize on the cell type better.
We have been using the term "shape" in the cell set and connectivity
classes. To be consistent, use the term "shape" for the geometric
identify of the cell everywhere.
The PrintSummary for CoordinateSystem went in an infinite loop. It was
supposed to call PrintSummary of its superclass (Field), but instead it
called itself.
The PrintSummary for Field only worked for fields of type vtkm::Float32.
To make it work for all array types, I added a PrintSummary method to
DynamicArrayHandle, and Field calls that without trying to cast to a
static type.
Move ArrayPortalUniformPointCoordinates to the vtkm::internal namespace
since it is going to be actively used in both control and execution
environments.
Replace usage of extent with simple dimensions. We have decided that
there is not a lot of value in supporting extent in VTK-m.
We want to be able to get topological connections where it is difficult
to know how many values you get each time. In this change, the type of
the vector holding the from indices is determined from the connectivity
object, and the worklet does not know the type (it must be templated).
Although you do not need to specify the max number for this value set
(you still currently do for field values), we still need to change the
type for explicit sets that uses something that does not rely on the Vec
class. The cell-to-point method also needs a Vec wrapper that allows it
to shorten the vector dynamically.
Clean up CellSet
Underneath the CellSet implementation is a set of supporting classes that manage the actual structure in both the control and execution environments. However, the implementation of these classes was a bit confusing and inconsistent. The following changes are made:
* Most significantly, there is no longer any Connectivity classes in the control environment. This functionality has been wrapped up into the CellSet classes, which is more consistent and easier to understand. (There was a definite distinction between CellSet and Connectivity, but it was subtle and difficult to understand.) This also means that edits to CellSets happen to CellSets directly.
* The set of classes for structured and explicit cell sets match. There is different functionality within, but the class naming and meaning are consistent.
* Make the class names more consistent with the rest of VTK-m class names. Specifically classes like ExplicitConnectivity become ConnectivityExplicit. Also, the words regular and structured were being used interchangeably. Now, always use structured except when dealing specifically with grids of regular spacing.
* The connectivity classes were using the nomenclature "From" and "To" to specify topological elements of links. The same concept in worklet classes were using the nomenclature "Src" and "Dest." For consistency, all references are changed to "From" and "To".
* Unlike explicit cell sets, structured cell sets have functionality shared between control and execution environments. Rather than duplicate it or create unique exposed classes, have a shared internal implementation in vtkm::internal.
See merge request !117
The storage used will now be aligned to `VTKM_CACHE_LINE_SIZE bytes,
resulting in slightly better cache usage and load/store performance.
This define is set in `StorageBasic.h We also now detect if Posix is
available in Configure.h and will define VTKM_POSIX with _POSIX_VERSION
if it's available.
The AlignedAllocator used by StorageBasic is also STL compatible
and can be used in STL containers so user's can use it in their
std::vector and pass aligned user memory to the storage.
Most of VTK-m follows the convention of calling the 0D topology elements
"points" (which follows the convention of VTK). However, there were
several places where they were referred to as "nodes." Make things
consistent by calling them points everywhere.
Also merged some redundant ExecutionSignature tags.
Previously there was a Connectivity* structure for both the control
environment and the execution environment. This was necessary before
because the connectivity is explicit to the from and to topology
elements, so you would get this structure from the appropriate call to
CellSet*. However, the symantics are changed so that the type of
connectivity is selected in the worklet's dispatcher. Thus, it is now
much cleaner to manage the CellSet structure in the CellSet class itself
and just have a single set of Connectivity* classes in the execution
environment.
