ruby/debug is a new debugger that is going to ship with CRuby.
It makes sense for Rails to switch to this one because that is
where the language is heading, and because Byebug is not fully
compatible with Zeitwerk. See
https://github.com/deivid-rodriguez/byebug/issues/564
While ruby/debug has not been heavily tested with Zeitwerk,
casual usage seems to suggest it works without issues, including
explicit namespaces, which is where Byebug and Zeitwerk conflict.
Byebug is terrific, thanks a lot for all these years. ❤️
I found an unexpected use of assertion in the block of `assert_raise`
when I implemented https://github.com/rubocop/rubocop-minitest/pull/137.
It is expected to be asserted after an exception is raised in
`assert_raise` block, but in actually it is not asserted after an
exception is raised. Therefore, this PR removes or updates assertions
that have not been asserted after an exception has raised.
This PR will add `rubocop-minitest` and enable
`Minitest/UnreachableAssertion` cop to able similar auto-detection,
but will remove `rubocop-minitest` from this PR if you don't like it.
* Stop trying to configure listen by default on compatible platforms
Modern computers with SSDs don't see much/any benefit from having an evented file update watcher. Remove complexity by taking this spinning-drive concession out.
* Actually need listen for testing the opt-in
* Test no longer relevant
Prior to this commit, when adding attachments to an inbound email
through the conductor, the log would warn of an unpermitted parameter
with the message:
> Unpermitted parameter: :attachments. Context: { }
Also, if an application had the setting:
config.action_controller.action_on_unpermitted_parameters = :raise
it would raise an error, because the attachments are not a permitted
parameter.
This commit also sets `action_on_unpermitted_parameters` to `:raise`
for the action mailbox test suite, so that tests are run in most
restrictive setting available, to prevent future unpermitted parameters
from being passed by conductor actions.
Co-authored-by: Dana Henke <danapalazzo1@gmail.com>
This is imperfect in situations when a separation
between regular files (such as uploads) and emails
is necessary (for the purposes of regulatory compliance,
proper compartmentalization, etc.)
Solution: allow configuring ActionMailbox's storage service
Terser is more up to date with modern javascript features, and the
uglifier gem repository recommends using it for minifying ES6+.
Followup for 955041b
Affected gems:
* actionmailbox
* activestorage
* actiontext
This fixes the following warning:
DEPRECATION WARNING: Using legacy connection handling is deprecated. Please set
`legacy_connection_handling` to `false` in your application.
The new connection handling does not support `connection_handlers`
getter and setter.
Read more about how to migrate at: https://guides.rubyonrails.org/active_record_multiple_databases.html#migrate-to-the-new-connection-handling
(called from require at ~/.gem/ruby/3.1.0/gems/zeitwerk-2.4.2/lib/zeitwerk/kernel.rb:34)
Currently when you make a new Rails app, we generate a lot of initializers. For new users, I think we should try and include as few as possible - the less files, the less daunting a new app is. And for upgrades I'd like to [continue to simplify the update process](https://github.com/rails/rails/pull/41083), in this case by not bringing back initializers you have probably already dismissed or modified.
In this PR I'm proposing we remove two initializers: `application_controller_renderer.rb` and `cookies_serializer.rb`:
**`application_controller_renderer.rb`**. This configures [`ActionController::Renderer`](https://api.rubyonrails.org/classes/ActionController/Renderer.html), for rendering views outside of controller actions. I don't think this is something most Rails apps will need (certainly not on day 1); users can configure this feature when they need it.
**`cookies_serializer.rb`**. This was added for [Rails 4.1](https://guides.rubyonrails.org/upgrading_ruby_on_rails.html#cookies-serializer). The behaviour is:
- For new apps, the initializer says `:json`.
- For upgraded apps that don't have the initializer, it is added with value `:marshal`.
- If there's no initializer, the [default value](c9a89a4067/actionpack/lib/action_dispatch/middleware/cookies.rb (L589)) is `:marshal`.
Since nobody should be upgrading direct from Rails 4.0 to Rails 7.0, we can simplify this by using new framework defaults. So the behavior will now be:
- For new apps, `config.load_defaults("7.0")` sets the value to `:json`.
- The `new_framework_defaults_7_0.rb` file explains this, and suggests using `:hybrid` to be upgrade to JSON cookies.
- No changes to [the code](c9a89a4067/actionpack/lib/action_dispatch/middleware/cookies.rb (L589)); the default value is `:marshal` if you don't set one.
So if you were not setting a `cookies_serializer` previously and you want to keep using `:marshal`, you'll need to explicitly set this before using `config.load_defaults("7.0")`, otherwise it will switch to `:json`. The upside of this is you won't get the `cookies_serializer.rb` file created for you every time you upgrade.
This pull request addresses these warnings.
```ruby
$ cd actionmailbox
$ bin/test test/controllers/ingresses/relay/inbound_emails_controller_test.rb
Run options: --seed 32561
DEPRECATION WARNING: Rails 7.0 will return Content-Type header without modification. If you want just the MIME type, please use `#media_type` instead. (called from call at /home/yahonda/.rbenv/versions/3.0.0/lib/ruby/gems/3.0.0/gems/rack-2.2.3/lib/rack/tempfile_reaper.rb:15)
...DEPRECATION WARNING: Rails 7.0 will return Content-Type header without modification. If you want just the MIME type, please use `#media_type` instead. (called from call at /home/yahonda/.rbenv/versions/3.0.0/lib/ruby/gems/3.0.0/gems/rack-2.2.3/lib/rack/tempfile_reaper.rb:15)
..
Finished in 0.114883s, 43.5224 runs/s, 87.0447 assertions/s.
5 runs, 10 assertions, 0 failures, 0 errors, 0 skips
$
```
Follow-up https://github.com/rails/rails/commit/84055130713
related to https://github.com/rails/rails/pull/41251
Fix that a storage upload error would leave behind a stuck-pending ActionMailbox::InboundEmail that could never be processed. The message isn't lost: the SMTP relay sees an HTTP server error and defers message delivery. We just have spurious, non-actionable InboundEmails stuck pending and tripping monitoring.
This does still leave behind an unattached ActiveStorage::Blob with no corresponding object on the storage service, but that's less annoying.
`Minitest.plugin_rails_init` sets `Minitest.backtrace_filter` to
`Rails.backtrace_cleaner` right before tests are run, overwriting the
value set in test_helper.rb.
`Rails.backtrace_cleaner` silences backtrace lines that do not start
with `Rails.root` followed by e.g. "lib/" or "test/". Thus when
`Rails.root` is a subdirectory of the project directory -- for example,
when testing a plugin that has a dummy app -- all lines of the backtrace
are silenced.
This commit adds a fallback such that when all backtrace lines are
silenced, the original `Minitest.backtrace_filter` is used instead.
Additionally, this commit refactors and expands existing test coverage.
Permit applications to hack in custom DB config for ActionMailbox::InboundEmail until Action Mailbox has first-class multi-DB support:
ActiveSupport.on_load(:action_mailbox_record) do
connects_to reading: :action_mailbox_replica, writing: :action_mailbox_primary
end
Sendgrid, like Mailgun, only passes BCC recipients as a parameter in the original JSON payload.
This PR adds code to prepend the recipients from the Sendgrid payload to the raw_email under the X-Original-To header.
References #38738.
Generators generate things, but what is meant by 'Stubbing out' might
confuse beginners and non-native English speakers.
While generated tests are stubs that should have an implementation, a
generated model is a valid model that doesn't require any changes.
- Add the configuration option for annotating templates with file names to the generated app.
- Add `annotate_rendered_view_with_filenames` option to configuring guide.
Mandrill's Inbound API checks to see if a URL exists before it creates
the webhook. It sends a HEAD request, to which we now return a 200 OK
response to indicate that the route exists.
Now we can generate inbound API calls with ease on Mandrill, without
having to shuffle around tokens in production.
Fixes#37609.
* Add a way to deliver inbound emails by source
Great for testing when you get an eml file and can just paste it in.
* Test updates
* Fix tests
* Fix spacing
As a developer, when looking at a page in my web browser, it's sometimes
difficult to figure out which template(s) are being used to render the page.
config.action_view.annotate_template_file_names adds HTML comments to the
rendered output indicating where each template begins and ends.
Co-authored-by: Aaron Patterson <tenderlove@github.com>
* require, require_relative, load by double quotes
We're getting rid of all single quote usage, unless it serves a specific purpose, as per the general style guide.
Expose the Mailgun SMTP recipient to Action Mailbox as X-Original-To, like Postfix.
Allows handling BCCed recipients who aren't listed in To/CC fields.
