bartvdbraak/blender
1
0
Fork 4
Code Issues 4 Pull Requests 1 Actions 1 Packages Projects Releases Wiki Activity
75841bc97f
blender/source/gameengine/Converter/KX_ConvertActuators.cpp

1114 lines
32 KiB
C++
Raw Normal View History

Initial revision
2002-10-12 11:37:38 +00:00
/**
* $Id$
*
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* ***** BEGIN GPL LICENSE BLOCK *****
Initial revision
2002-10-12 11:37:38 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* of the License, or (at your option) any later version.
Initial revision
2002-10-12 11:37:38 +00:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* ***** END GPL LICENSE BLOCK *****
Initial revision
2002-10-12 11:37:38 +00:00
* Convert Blender actuators for use in the GameEngine
*/
#ifdef WIN32
#pragma warning (disable : 4786)
#endif //WIN32
#define BLENDER_HACK_DTIME 0.02
2d Filters updated, now you can use custom filter and write your own GLSL shader program to filter rendering result.
2007-11-06 12:16:12 +00:00
#include "MEM_guardedalloc.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "KX_BlenderSceneConverter.h"
#include "KX_ConvertActuators.h"
// Actuators
//SCA logiclibrary native logicbricks
#include "SCA_PropertyActuator.h"
#include "SCA_LogicManager.h"
#include "SCA_RandomActuator.h"
2d-Filters feature and actuators.
2007-10-22 20:24:26 +00:00
#include "SCA_2DFilterActuator.h"
Initial revision
2002-10-12 11:37:38 +00:00
// Ketsji specific logicbricks
#include "KX_SceneActuator.h"
#include "KX_IpoActuator.h"
#include "KX_SoundActuator.h"
#include "KX_CDActuator.h"
#include "KX_ObjectActuator.h"
#include "KX_TrackToActuator.h"
#include "KX_ConstraintActuator.h"
#include "KX_CameraActuator.h"
#include "KX_GameActuator.h"
BGE patch: add state engine support in the logic bricks. This patch introduces a simple state engine system with the logic bricks. This system features full backward compatibility, multiple active states, multiple state transitions, automatic disabling of sensor and actuators, full GUI support and selective display of sensors and actuators. Note: Python API is available but not documented yet. It will be added asap. State internals =============== The state system is object based. The current state mask is stored in the object as a 32 bit value; each bit set in the mask is an active state. The controllers have a state mask too but only one bit can be set: a controller belongs to a single state. The game engine will only execute controllers that belong to active states. Sensors and actuators don't have a state mask but are effectively attached to states via their links to the controllers. Sensors and actuators can be connected to more than one state. When a controller becomes inactive because of a state change, its links to sensors and actuators are temporarily broken (until the state becomes active again). If an actuator gets isolated, i.e all the links to controllers are broken, it is automatically disabled. If a sensor gets isolated, the game engine will stop calling it to save CPU. It will also reset the sensor internal state so that it can react as if the game just started when it gets reconnected to an active controller. For example, an Always sensor in no pulse mode that is connected to a single state (i.e connected to one or more controllers of a single state) will generate a pulse each time the state becomes active. This feature is not available on all sensors, see the notes below. GUI === This system system is fully configurable through the GUI: the object state mask is visible under the object bar in the controller's colum as an array of buttons just like the 3D view layer mask. Click on a state bit to only display the controllers of that state. You can select more than one state with SHIFT-click. The All button sets all the bits so that you can see all the controllers of the object. The Ini button sets the state mask back to the object default state. You can change the default state of object by first selecting the desired state mask and storing using the menu under the State button. If you define a default state mask, it will be loaded into the object state make when you load the blend file or when you run the game under the blenderplayer. However, when you run the game under Blender, the current selected state mask will be used as the startup state for the object. This allows you to test specific state during the game design. The controller display the state they belong to with a new button in the controller header. When you add a new controller, it is added by default in the lowest enabled state. You can change the controller state by clicking on the button and selecting another state. If more than one state is enabled in the object state mask, controllers are grouped by state for more readibility. The new Sta button in the sensor and actuator column header allows you to display only the sensors and actuators that are linked to visible controllers. A new state actuator is available to modify the state during the game. It defines a bit mask and the operation to apply on the current object state mask: Cpy: the bit mask is copied to the object state mask. Add: the bits that set in the bit mask will be turned on in the object state mask. Sub: the bits that set in the bit mask will be turned off in the object state mask. Inv: the bits that set in the bit mask will be inverted in the objecyy state mask. Notes ===== - Although states have no name, a simply convention consists in using the name of the first controller of the state as the state name. The GUI will support that convention by displaying as a hint the name of the first controller of the state when you move the mouse over a state bit of the object state mask or of the state actuator bit mask. - Each object has a state mask and each object can have a state engine but if several objects are part of a logical group, it is recommended to put the state engine only in the main object and to link the controllers of that object to the sensors and actuators of the different objects. - When loading an old blend file, the state mask of all objects and controllers are initialized to 1 so that all the controllers belong to this single state. This ensures backward compatibility with existing game. - When the state actuator is activated at the same time as other actuators, these actuators are guaranteed to execute before being eventually disabled due to the state change. This is useful for example to send a message or update a property at the time of changing the state. - Sensors that depend on underlying resource won't reset fully when they are isolated. By the time they are acticated again, they will behave as follow: * keyboard sensor: keys already pressed won't be detected. The keyboard sensor is only sensitive to new key press. * collision sensor: objects already colliding won't be detected. Only new collisions are detected. * near and radar sensor: same as collision sensor.
2008-06-22 14:23:57 +00:00
#include "KX_StateActuator.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "KX_VisibilityActuator.h"
#include "KX_SCA_AddObjectActuator.h"
#include "KX_SCA_EndObjectActuator.h"
#include "KX_SCA_ReplaceMeshActuator.h"
Commit patch #8799: Realtime SetParent function in the BGE This patch consists in new KX_GameObject::SetParent() and KX_GameObject::RemoveParent() functions to create and destroy parent relation during game. These functions are accessible through python and through a new actuator KX_ParentActuator. Function documentation in PyDoc. The object keeps its orientation, position and scale when it is parented but will further rotate, move and scale with its parent from that point on. When the parent relation is broken, the object keeps the orientation, position and scale it had at that time. The function has no effect if any of the X/Y/Z scale of the object or its new parent are below Epsilon.
2008-04-06 18:30:52 +00:00
#include "KX_ParentActuator.h"
BGE patch 15044 approved: Edit Object Dynamics Actuator. Add enable/disable dynamics actuator under the "Edit Object" category. The Enable/disable rigid body option is also availale but not implemented.
2008-06-25 14:09:15 +00:00
#include "KX_SCA_DynamicActuator.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "KX_Scene.h"
#include "KX_KetsjiEngine.h"
#include "IntValue.h"
#include "KX_GameObject.h"
/* This little block needed for linking to Blender... */
2d Filters updated, now you can use custom filter and write your own GLSL shader program to filter rendering result.
2007-11-06 12:16:12 +00:00
#include "BKE_text.h"
Initial revision
2002-10-12 11:37:38 +00:00
#include "BLI_blenlib.h"
#include "KX_NetworkMessageActuator.h"
#ifdef WIN32
#include "BLI_winstuff.h"
#endif
#include "DNA_object_types.h"
#include "DNA_sound_types.h"
#include "DNA_scene_types.h"
#include "DNA_actuator_types.h"
#include "DNA_packedFile_types.h"
#include "BL_ActionActuator.h"
BGE Patch: Add Shape Action support and update MSCV_7 project file for glew. Shape Action are now supported in the BGE. A new type of actuator "Shape Action" is available on mesh objects. It can be combined with Action actuator on parent armature. Only relative keys are supported. All the usual action options are available: type, blending, priority, Python API. Only actions with shape channels should be specified of course, otherwise the actuator has no effect. Shape action will still work after a mesh replacement provided that the new mesh has compatible shape keys.
2008-06-18 06:46:49 +00:00
#include "BL_ShapeActionActuator.h"
Initial revision
2002-10-12 11:37:38 +00:00
/* end of blender include block */
#include "BL_BlenderDataConversion.h"
/**
KX_BLENDERTRUNC needed to round 'almost' zero values to zero, else velocities etc. are incorrectly set
*/
#define KX_BLENDERTRUNC(x) (( x < 0.0001 && x > -0.0001 ) ? 0.0 : x)
void BL_ConvertActuators(char* maggiename,
struct Object* blenderobject,
KX_GameObject* gameobj,
SCA_LogicManager* logicmgr,
KX_Scene* scene,
KX_KetsjiEngine* ketsjiEngine,
int & executePriority,
int activeLayerBitInfo,
bool isInActiveLayer,
RAS_IRenderTools* rendertools,
KX_BlenderSceneConverter* converter
)
{
int uniqueint = 0;
bActuator* bact = (bActuator*) blenderobject->actuators.first;
while(bact)
{
STR_String uniquename = bact->name;
STR_String objectname = gameobj->GetName();
SCA_IActuator* baseact = NULL;
switch (bact->type)
{
case ACT_OBJECT:
{
bObjectActuator* obact = (bObjectActuator*) bact->data;
MT_Vector3 forcevec(KX_BLENDERTRUNC(obact->forceloc[0]),
KX_BLENDERTRUNC(obact->forceloc[1]),
KX_BLENDERTRUNC(obact->forceloc[2]));
MT_Vector3 torquevec(obact->forcerot[0],obact->forcerot[1],obact->forcerot[2]);
MT_Vector3 dlocvec ( KX_BLENDERTRUNC(obact->dloc[0]),
KX_BLENDERTRUNC(obact->dloc[1]),
KX_BLENDERTRUNC(obact->dloc[2]));
MT_Vector3 drotvec ( KX_BLENDERTRUNC(obact->drot[0]),obact->drot[1],obact->drot[2]);
MT_Vector3 linvelvec ( KX_BLENDERTRUNC(obact->linearvelocity[0]),
KX_BLENDERTRUNC(obact->linearvelocity[1]),
KX_BLENDERTRUNC(obact->linearvelocity[2]));
MT_Vector3 angvelvec ( KX_BLENDERTRUNC(obact->angularvelocity[0]),
KX_BLENDERTRUNC(obact->angularvelocity[1]),
KX_BLENDERTRUNC(obact->angularvelocity[2]));
BGE patch: Add damping and clamping option to motion actuator. This patch introduces two options for the motion actuator: damping: number of frames to reach the target velocity. It takes into account the startup velocityin the target velocity direction and add 1/damping fraction of target velocity until the full velocity is reached. Works only with linear and angular velocity. It will be extended to delta and force motion method in a future release. clamping: apply the force and torque as long as the target velocity is not reached. If this option is set, the velocity specified in linV or angV are not applied to the object but used as target velocity. You should also specify a force in force or torque field: the force will be applied as long as the velocity along the axis of the vector set in linV or angV is not reached. Works best in low friction environment.
2008-06-24 19:37:43 +00:00
short damping = obact->damping;
Initial revision
2002-10-12 11:37:38 +00:00
drotvec /= BLENDER_HACK_DTIME;
//drotvec /= BLENDER_HACK_DTIME;
drotvec *= MT_2_PI/360.0;
//dlocvec /= BLENDER_HACK_DTIME;
//linvelvec /= BLENDER_HACK_DTIME;
//angvelvec /= BLENDER_HACK_DTIME;
/* Blender uses a bit vector internally for the local-flags. In */
/* KX, we have four bools. The compiler should be smart enough */
/* to do the right thing. We need to explicitly convert here! */
KX_LocalFlags bitLocalFlag;
bitLocalFlag.Force = bool((obact->flag & ACT_FORCE_LOCAL)!=0);
bitLocalFlag.Torque = bool((obact->flag & ACT_TORQUE_LOCAL) !=0);//rlocal;
bitLocalFlag.DLoc = bool((obact->flag & ACT_DLOC_LOCAL)!=0);
bitLocalFlag.DRot = bool((obact->flag & ACT_DROT_LOCAL)!=0);
bitLocalFlag.LinearVelocity = bool((obact->flag & ACT_LIN_VEL_LOCAL)!=0);
bitLocalFlag.AngularVelocity = bool((obact->flag & ACT_ANG_VEL_LOCAL)!=0);
BGE logic update: new servo control motion actuator, new distance constraint actuator, new orientation constraint actuator, new actuator sensor. General ======= - Removal of Damp option in motion actuator (replaced by Servo control motion). - No PyDoc at present, will be added soon. Generalization of the Lvl option ================================ A sensor with the Lvl option selected will always produce an event at the start of the game or when entering a state or at object creation. The event will be positive or negative depending of the sensor condition. A negative pulse makes sense when used with a NAND controller: it will be converted into an actuator activation. Servo control motion ==================== A new variant of the motion actuator allows to control speed with force. The control if of type "PID" (Propotional, Integral, Derivate): the force is automatically adapted to achieve the target speed. All the parameters of the servo controller are configurable. The result is a great variety of motion style: anysotropic friction, flying, sliding, pseudo Dloc... This actuator should be used in preference to Dloc and LinV as it produces more fluid movements and avoids the collision problem with Dloc. LinV : target speed as (X,Y,Z) vector in local or world coordinates (mostly useful in local coordinates). Limit: the force can be limited along each axis (in the same coordinates of LinV). No limitation means that the force will grow as large as necessary to achieve the target speed along that axis. Set a max value to limit the accelaration along an axis (slow start) and set a min value (negative) to limit the brake force. P: Proportional coefficient of servo controller, don't set directly unless you know what you're doing. I: Integral coefficient of servo controller. Use low value (<0.1) for slow reaction (sliding), high values (>0.5) for hard control. The P coefficient will be automatically set to 60 times the I coefficient (a reasonable value). D: Derivate coefficient. Leave to 0 unless you know what you're doing. High values create instability. Notes: - This actuator works perfectly in zero friction environment: the PID controller will simulate friction by applying force as needed. - This actuator is compatible with simple Drot motion actuator but not with LinV and Dloc motion. - (0,0,0) is a valid target speed. - All parameters are accessible through Python. Distance constraint actuator ============================ A new variant of the constraint actuator allows to set the distance and orientation relative to a surface. The controller uses a ray to detect the surface (or any object) and adapt the distance and orientation parallel to the surface. Damp: Time constant (in nb of frames) of distance and orientation control. Dist: Select to enable distance control and set target distance. The object will be position at the given distance of surface along the ray direction. Direction: chose a local axis as the ray direction. Range: length of ray. Objecgt within this distance will be detected. N : Select to enable orientation control. The actuator will change the orientation and the location of the object so that it is parallel to the surface at the vertical of the point of contact of the ray. M/P : Select to enable material detection. Default is property detection. Property/Material: name of property/material that the target of ray must have to be detected. If not set, property/ material filter is disabled and any collisioning object within range will be detected. PER : Select to enable persistent operation. Normally the actuator disables itself automatically if the ray does not reach a valid target. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. rotDamp: Time constant (in nb of frame) of orientation control. 0 : use Damp parameter. >0: use a different time constant for orientation. Notes: - If neither N nor Dist options are set, the actuator does not change the position and orientation of the object; it works as a ray sensor. - The ray has no "X-ray" capability: if the first object hit does not have the required property/material, it returns no hit and the actuator disables itself unless PER option is enabled. - This actuator changes the position and orientation but not the speed of the object. This has an important implication in a gravity environment: the gravity will cause the speed to increase although the object seems to stay still (it is repositioned at each frame). The gravity must be compensated in one way or another. the new servo control motion actuator is the simplest way: set the target speed along the ray axis to 0 and the servo control will automatically compensate the gravity. - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important) - All parameters are accessible through Python. Orientation constraint ====================== A new variant of the constraint actuator allows to align an object axis along a global direction. Damp : Time constant (in nb of frames) of orientation control. X,Y,Z: Global coordinates of reference direction. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. Notes: - (X,Y,Z) = (0,0,0) is not a valid direction - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important). - This actuator doesn't change the location and speed. It is compatible with gravity. - All parameters are accessible through Python. Actuator sensor =============== This sensor detects the activation and deactivation of actuators of the same object. The sensor generates a positive pulse when the corresponding sensor is activated and a negative pulse when it is deactivated (the contrary if the Inv option is selected). This is mostly useful to chain actions and to detect the loss of contact of the distance motion actuator. Notes: - Actuators are disabled at the start of the game; if you want to detect the On-Off transition of an actuator after it has been activated at least once, unselect the Lvl and Inv options and use a NAND controller. - Some actuators deactivates themselves immediately after being activated. The sensor detects this situation as an On-Off transition. - The actuator name can be set through Python.
2008-07-04 08:14:50 +00:00
bitLocalFlag.ServoControl = bool(obact->type == ACT_OBJECT_SERVO);
Initial revision
2002-10-12 11:37:38 +00:00
bitLocalFlag.AddOrSetLinV = bool((obact->flag & ACT_ADD_LIN_VEL)!=0);
KX_ObjectActuator* tmpbaseact = new KX_ObjectActuator(gameobj,
forcevec.getValue(),
torquevec.getValue(),
dlocvec.getValue(),
drotvec.getValue(),
linvelvec.getValue(),
angvelvec.getValue(),
BGE patch: Add damping and clamping option to motion actuator. This patch introduces two options for the motion actuator: damping: number of frames to reach the target velocity. It takes into account the startup velocityin the target velocity direction and add 1/damping fraction of target velocity until the full velocity is reached. Works only with linear and angular velocity. It will be extended to delta and force motion method in a future release. clamping: apply the force and torque as long as the target velocity is not reached. If this option is set, the velocity specified in linV or angV are not applied to the object but used as target velocity. You should also specify a force in force or torque field: the force will be applied as long as the velocity along the axis of the vector set in linV or angV is not reached. Works best in low friction environment.
2008-06-24 19:37:43 +00:00
damping,
Initial revision
2002-10-12 11:37:38 +00:00
bitLocalFlag
);
baseact = tmpbaseact;
break;
}
case ACT_ACTION:
{
if (blenderobject->type==OB_ARMATURE){
bActionActuator* actact = (bActionActuator*) bact->data;
STR_String propname = (actact->name ? actact->name : "");
BGE patch #14386: Action Actuator Current Frame Prop. This patch is very usefull for action feedback logic: a sensor on the property can be used to detect a certain moment in the action and trigger more stuff. The property must be on float type for best results
2008-06-23 15:32:44 +00:00
STR_String propframe = (actact->frameProp ? actact->frameProp : "");
Initial revision
2002-10-12 11:37:38 +00:00
BL_ActionActuator* tmpbaseact = new BL_ActionActuator(
gameobj,
propname,
BGE patch #14386: Action Actuator Current Frame Prop. This patch is very usefull for action feedback logic: a sensor on the property can be used to detect a certain moment in the action and trigger more stuff. The property must be on float type for best results
2008-06-23 15:32:44 +00:00
propframe,
Initial revision
2002-10-12 11:37:38 +00:00
actact->sta,
actact->end,
actact->act,
actact->type, // + 1, because Blender starts to count at zero,
actact->blendin,
actact->priority,
Adding an option for action actuator - "Continue" this means animations always play from where they left off. Continue was the 2.46 operation too, so new functionality is the option to disable. When using states, an action like kick or throw can often switch out before finishing playing the action, and there was no way to play from the start frame the second time round. (even setting the actions current frame through python doesn't work work)
2008-07-10 14:23:19 +00:00
actact->end_reset,
Initial revision
2002-10-12 11:37:38 +00:00
actact->stridelength
// Ketsji at 1, because zero is reserved for "NoDef"
);
baseact= tmpbaseact;
break;
}
else
printf ("Discarded action actuator from non-armature object [%s]\n", blenderobject->id.name+2);
}
BGE Patch: Add Shape Action support and update MSCV_7 project file for glew. Shape Action are now supported in the BGE. A new type of actuator "Shape Action" is available on mesh objects. It can be combined with Action actuator on parent armature. Only relative keys are supported. All the usual action options are available: type, blending, priority, Python API. Only actions with shape channels should be specified of course, otherwise the actuator has no effect. Shape action will still work after a mesh replacement provided that the new mesh has compatible shape keys.
2008-06-18 06:46:49 +00:00
case ACT_SHAPEACTION:
{
if (blenderobject->type==OB_MESH){
bActionActuator* actact = (bActionActuator*) bact->data;
STR_String propname = (actact->name ? actact->name : "");
BL_ShapeActionActuator* tmpbaseact = new BL_ShapeActionActuator(
gameobj,
propname,
actact->sta,
actact->end,
actact->act,
actact->type, // + 1, because Blender starts to count at zero,
actact->blendin,
actact->priority,
actact->stridelength
// Ketsji at 1, because zero is reserved for "NoDef"
);
baseact= tmpbaseact;
break;
}
else
printf ("Discarded shape action actuator from non-mesh object [%s]\n", blenderobject->id.name+2);
}
Initial revision
2002-10-12 11:37:38 +00:00
case ACT_IPO:
{
bIpoActuator* ipoact = (bIpoActuator*) bact->data;
bool ipochild = (ipoact->flag & ACT_IPOCHILD) !=0;
STR_String propname = ( ipoact->name ? ipoact->name : "");
// first bit?
bool ipo_as_force = (ipoact->flag & ACT_IPOFORCE);
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
bool local = (ipoact->flag & ACT_IPOLOCAL);
bool ipo_add = (ipoact->flag & ACT_IPOADD);
Initial revision
2002-10-12 11:37:38 +00:00
KX_IpoActuator* tmpbaseact = new KX_IpoActuator(
gameobj,
propname ,
ipoact->sta,
ipoact->end,
ipochild,
ipoact->type + 1, // + 1, because Blender starts to count at zero,
// Ketsji at 1, because zero is reserved for "NoDef"
ipo_as_force,
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
ipo_add,
local);
Initial revision
2002-10-12 11:37:38 +00:00
baseact = tmpbaseact;
break;
}
case ACT_LAMP:
{
break;
}
case ACT_CAMERA:
{
bCameraActuator *camact = (bCameraActuator *) bact->data;
if (camact->ob) {
KX_GameObject *tmpgob = converter->FindGameObject(camact->ob);
/* visifac, fac and axis are not copied from the struct... */
/* that's some internal state... */
KX_CameraActuator *tmpcamact
= new KX_CameraActuator(gameobj,
tmpgob,
camact->height,
camact->min,
camact->max,
camact->axis=='x');
baseact = tmpcamact;
}
break;
}
case ACT_MESSAGE:
{
bMessageActuator *msgAct = (bMessageActuator *) bact->data;
/**
* Get the name of the properties that objects must own that
* we're sending to, if present
*/
STR_String toPropName = (msgAct->toPropName
? (char*) msgAct->toPropName
: "");
/**
* Get the Message Subject to send.
*/
STR_String subject = (msgAct->subject
? (char*) msgAct->subject
: "");
/**
* Get the bodyType
*/
int bodyType = msgAct->bodyType;
/**
* Get the body (text message or property name whose value
* we'll be sending, might be empty
*/
STR_String body = (msgAct->body
? (char*) msgAct->body
: "");
KX_NetworkMessageActuator *tmpmsgact =
new KX_NetworkMessageActuator(
gameobj, // actuator controlling object
scene->GetNetworkScene(), // needed for replication
toPropName,
subject,
bodyType,
body);
baseact = tmpmsgact;
break;
}
case ACT_MATERIAL:
{
break;
}
case ACT_SOUND:
{
bSoundActuator* soundact = (bSoundActuator*) bact->data;
/* get type, and possibly a start and end frame */
short startFrame = soundact->sta, stopFrame = soundact->end;
KX_SoundActuator::KX_SOUNDACT_TYPE
soundActuatorType = KX_SoundActuator::KX_SOUNDACT_NODEF;
switch(soundact->type) {
case ACT_SND_PLAY_STOP_SOUND:
soundActuatorType = KX_SoundActuator::KX_SOUNDACT_PLAYSTOP;
break;
case ACT_SND_PLAY_END_SOUND:
soundActuatorType = KX_SoundActuator::KX_SOUNDACT_PLAYEND;
break;
case ACT_SND_LOOP_STOP_SOUND:
soundActuatorType = KX_SoundActuator::KX_SOUNDACT_LOOPSTOP;
break;
case ACT_SND_LOOP_END_SOUND:
soundActuatorType = KX_SoundActuator::KX_SOUNDACT_LOOPEND;
break;
case ACT_SND_LOOP_BIDIRECTIONAL_SOUND:
soundActuatorType = KX_SoundActuator::KX_SOUNDACT_LOOPBIDIRECTIONAL;
break;
case ACT_SND_LOOP_BIDIRECTIONAL_STOP_SOUND:
soundActuatorType = KX_SoundActuator::KX_SOUNDACT_LOOPBIDIRECTIONAL_STOP;
break;
default:
/* This is an error!!! */
soundActuatorType = KX_SoundActuator::KX_SOUNDACT_NODEF;
}
if (soundActuatorType != KX_SoundActuator::KX_SOUNDACT_NODEF)
{
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
SND_Scene* soundscene = scene->GetSoundScene();
STR_String samplename = "";
bool sampleisloaded = false;
Initial revision
2002-10-12 11:37:38 +00:00
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
if (soundact->sound) {
/* Need to convert the samplename into absolute path
* before checking if its loaded */
char fullpath[sizeof(soundact->sound->name)];
Initial revision
2002-10-12 11:37:38 +00:00
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
/* dont modify soundact->sound->name, only change a copy */
BLI_strncpy(fullpath, soundact->sound->name, sizeof(fullpath));
BLI_convertstringcode(fullpath, maggiename);
samplename = fullpath;
Initial revision
2002-10-12 11:37:38 +00:00
/* let's see if the sample was already loaded */
if (soundscene->IsSampleLoaded(samplename))
{
sampleisloaded = true;
}
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
else {
Initial revision
2002-10-12 11:37:38 +00:00
/* if not, make it so */
PackedFile* pf = soundact->sound->newpackedfile;
/* but we need a packed file then */
if (pf)
{
if (soundscene->LoadSample(samplename, pf->data, pf->size) > -1)
sampleisloaded = true;
}
/* or else load it from disk */
else
{
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
if (soundscene->LoadSample(samplename, NULL, 0) > -1) {
Initial revision
2002-10-12 11:37:38 +00:00
sampleisloaded = true;
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
}
else {
std::cout << "WARNING: Sound actuator \"" << bact->name <<
"\" from object \"" << blenderobject->id.name+2 <<
"\" failed to load sample." << std::endl;
}
Initial revision
2002-10-12 11:37:38 +00:00
}
}
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
} else {
std::cout << "WARNING: Sound actuator \"" << bact->name <<
"\" from object \"" << blenderobject->id.name+2 <<
"\" has no sound datablock." << std::endl;
}
/* Note, allowing actuators for sounds that are not there was added since 2.47
* This is because python may expect the actuator and raise an exception if it dosnt find it
* better just to add a dummy sound actuator. */
BGE patch: fix division by 0 error when sound sample cannot be loaded in sound actuator.
2008-08-28 08:13:58 +00:00
SND_SoundObject* sndobj = NULL;
if (sampleisloaded)
{
/* setup the SND_SoundObject */
sndobj = new SND_SoundObject();
sndobj->SetSampleName(samplename.Ptr());
sndobj->SetObjectName(bact->name);
if (soundact->sound) {
sndobj->SetRollOffFactor(soundact->sound->attenuation);
sndobj->SetGain(soundact->sound->volume);
sndobj->SetPitch(exp((soundact->sound->pitch / 12.0) * log(2.0)));
// sndobj->SetLoopStart(soundact->sound->loopstart);
// sndobj->SetLoopStart(soundact->sound->loopend);
if (soundact->sound->flags & SOUND_FLAGS_LOOP)
{
if (soundact->sound->flags & SOUND_FLAGS_BIDIRECTIONAL_LOOP)
sndobj->SetLoopMode(SND_LOOP_BIDIRECTIONAL);
else
sndobj->SetLoopMode(SND_LOOP_NORMAL);
}
else {
sndobj->SetLoopMode(SND_LOOP_OFF);
}
if (soundact->sound->flags & SOUND_FLAGS_PRIORITY)
sndobj->SetHighPriority(true);
Initial revision
2002-10-12 11:37:38 +00:00
else
BGE patch: fix division by 0 error when sound sample cannot be loaded in sound actuator.
2008-08-28 08:13:58 +00:00
sndobj->SetHighPriority(false);
if (soundact->sound->flags & SOUND_FLAGS_3D)
sndobj->Set3D(true);
else
sndobj->Set3D(false);
Initial revision
2002-10-12 11:37:38 +00:00
}
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
else {
BGE patch: fix division by 0 error when sound sample cannot be loaded in sound actuator.
2008-08-28 08:13:58 +00:00
/* dummy values for a NULL sound
* see editsound.c - defaults are unlikely to change soon */
sndobj->SetRollOffFactor(1.0);
sndobj->SetGain(1.0);
sndobj->SetPitch(1.0);
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
sndobj->SetLoopMode(SND_LOOP_OFF);
sndobj->SetHighPriority(false);
sndobj->Set3D(false);
BGE patch: fix division by 0 error when sound sample cannot be loaded in sound actuator.
2008-08-28 08:13:58 +00:00
}
BGE: allow sound actuators to be converted even when they have invalid samples without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all. This also fixes a problem where samples would be loaded multiple times.
2008-08-27 01:03:55 +00:00
}
KX_SoundActuator* tmpsoundact =
new KX_SoundActuator(gameobj,
sndobj,
scene->GetSoundScene(), // needed for replication!
soundActuatorType,
startFrame,
stopFrame);
tmpsoundact->SetName(bact->name);
baseact = tmpsoundact;
BGE patch: fix division by 0 error when sound sample cannot be loaded in sound actuator.
2008-08-28 08:13:58 +00:00
if (sndobj)
soundscene->AddObject(sndobj);
Initial revision
2002-10-12 11:37:38 +00:00
}
break;
}
case ACT_CD:
{
bCDActuator* cdact = (bCDActuator*) bact->data;
/* get type, and possibly a start and end frame */
short startFrame = cdact->sta, stopFrame = cdact->end;
KX_CDActuator::KX_CDACT_TYPE
cdActuatorType = KX_CDActuator::KX_CDACT_NODEF;
switch(cdact->type)
{
case ACT_CD_PLAY_ALL:
cdActuatorType = KX_CDActuator::KX_CDACT_PLAY_ALL;
break;
case ACT_CD_PLAY_TRACK:
cdActuatorType = KX_CDActuator::KX_CDACT_PLAY_TRACK;
break;
case ACT_CD_LOOP_TRACK:
cdActuatorType = KX_CDActuator::KX_CDACT_LOOP_TRACK;
break;
case ACT_CD_VOLUME:
cdActuatorType = KX_CDActuator::KX_CDACT_VOLUME;
break;
case ACT_CD_STOP:
cdActuatorType = KX_CDActuator::KX_CDACT_STOP;
break;
case ACT_CD_PAUSE:
cdActuatorType = KX_CDActuator::KX_CDACT_PAUSE;
break;
case ACT_CD_RESUME:
cdActuatorType = KX_CDActuator::KX_CDACT_RESUME;
break;
default:
/* This is an error!!! */
cdActuatorType = KX_CDActuator::KX_CDACT_NODEF;
}
if (cdActuatorType != KX_CDActuator::KX_CDACT_NODEF)
{
SND_CDObject* pCD = SND_CDObject::Instance();
if (pCD)
{
pCD->SetGain(cdact->volume);
KX_CDActuator* tmpcdact =
new KX_CDActuator(gameobj,
scene->GetSoundScene(), // needed for replication!
cdActuatorType,
cdact->track,
startFrame,
stopFrame);
tmpcdact->SetName(bact->name);
baseact = tmpcdact;
}
}
break;
}
case ACT_PROPERTY:
{
bPropertyActuator* propact = (bPropertyActuator*) bact->data;
BGE patch: Relink actuators with target within group when duplicating group; generalize protection against object deletion for all actuators that point to objects. Certain actuators hold a pointer to an objects: Property, SceneCamera, AddObject, Camera, Parent, TractTo. When a group is duplicated, the actuators that point to objects within the group will be relinked to point to the replicated objects and not to the original objects. This helps to setup self-contained group with a camera following a character for example. This feature also works when adding a single object (and all its children) with the AddObject actuator. The second part of the patch extends the protection against object deletion to all the actuators of the above list (previously, only the TrackTo, AddObject and Property actuators were protected). In case the target object of these actuators is deleted, the BGE won't crash.
2008-07-19 07:45:19 +00:00
SCA_IObject* destinationObj = NULL;
Initial revision
2002-10-12 11:37:38 +00:00
/*
here the destinationobject is searched. problem with multiple scenes: other scenes
have not been converted yet, so the destobj will not be found, so the prop will
not be copied.
possible solutions:
- convert everything when possible and not realtime only when needed.
- let the object-with-property report itself to the act when converted
*/
if (propact->ob)
Switch fixed time system. Logic updates should now happen at 30Hz, physics at 60Hz. (By default, use Python to set.) Some actuators still run at framerate (IPO, Action) for nice smooth animation, and an excuse to buy high end hardware. Keyboard sensors can now hook escape key. Ctrl-Break can be used from within blender if you've forgotten an end game actuator. Fixed a stupid bug preventing some actuators working (like TrackTo).
2004-10-16 11:41:50 +00:00
destinationObj = converter->FindGameObject(propact->ob);
Initial revision
2002-10-12 11:37:38 +00:00
SCA_PropertyActuator* tmppropact = new SCA_PropertyActuator(
gameobj,
destinationObj,
propact->name,
propact->value,
propact->type+1); // + 1 because Ketsji Logic starts
// with 0 for KX_ACT_PROP_NODEF
baseact = tmppropact;
break;
}
case ACT_EDIT_OBJECT:
{
bEditObjectActuator *editobact
= (bEditObjectActuator *) bact->data;
/* There are four different kinds of 'edit object' thingies */
/* The alternative to this lengthy conversion is packing */
/* several actuators in one, which is not very nice design.. */
switch (editobact->type) {
case ACT_EDOB_ADD_OBJECT:
{
// does the 'original' for replication exists, and
// is it in a non-active layer ?
BGE bug fix (good for 2.47): automatic detection that target object of AddObject actuator is being deleted to avoid crash (bad game design anyway)
2008-07-12 12:10:27 +00:00
SCA_IObject* originalval = NULL;
Python API get/setObject update for Actuators. (SetParent, AddObject, Camera and TrackTo) * bugfix for BGE python api - SetParent actuator getObject would segfault if the object was not set. * Added utility function ConvertPythonToGameObject() that can take a GameObject, string or None and set the game object from this since it was being done in a number of places. * allow setObject(None), since no object is valid for actuators, Python should be able to set this. * added optional argument for getObject() so it returns the KX_GameObject rather then its name, would prefer this be default but it could break existing games.
2008-08-14 08:58:25 +00:00
if (editobact->ob)
{
if (editobact->ob->lay & activeLayerBitInfo)
{
fprintf(stderr, "Warning, object \"%s\" from AddObject actuator \"%s\" is not in a hidden layer.\n", objectname.Ptr(), uniquename.Ptr());
}
else {
originalval = converter->FindGameObject(editobact->ob);
}
}
get/set Angular velocity for KX_GameObjects python api and for the AddObject actuator. Needed so objects created in an explosion could start spinning without having motion actuators and collision sensors on each item.
2008-08-27 03:34:53 +00:00
MT_Vector3 linvelvec (
KX_BLENDERTRUNC(editobact->linVelocity[0]),
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
KX_BLENDERTRUNC(editobact->linVelocity[1]),
KX_BLENDERTRUNC(editobact->linVelocity[2]));
get/set Angular velocity for KX_GameObjects python api and for the AddObject actuator. Needed so objects created in an explosion could start spinning without having motion actuators and collision sensors on each item.
2008-08-27 03:34:53 +00:00
MT_Vector3 angvelvec (
KX_BLENDERTRUNC(editobact->angVelocity[0]),
KX_BLENDERTRUNC(editobact->angVelocity[1]),
KX_BLENDERTRUNC(editobact->angVelocity[2]));
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
KX_SCA_AddObjectActuator* tmpaddact =
new KX_SCA_AddObjectActuator(
gameobj,
originalval,
editobact->time,
scene,
linvelvec.getValue(),
get/set Angular velocity for KX_GameObjects python api and for the AddObject actuator. Needed so objects created in an explosion could start spinning without having motion actuators and collision sensors on each item.
2008-08-27 03:34:53 +00:00
(editobact->localflag & ACT_EDOB_LOCAL_LINV)!=0,
angvelvec.getValue(),
(editobact->localflag & ACT_EDOB_LOCAL_ANGV)!=0
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
);
Initial revision
2002-10-12 11:37:38 +00:00
//editobact->ob to gameobj
baseact = tmpaddact;
}
break;
case ACT_EDOB_END_OBJECT:
{
KX_SCA_EndObjectActuator* tmpendact
= new KX_SCA_EndObjectActuator(gameobj,scene);
baseact = tmpendact;
}
break;
case ACT_EDOB_REPLACE_MESH:
{
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
RAS_MeshObject *tmpmesh = NULL;
Initial revision
2002-10-12 11:37:38 +00:00
if (editobact->me)
Switch fixed time system. Logic updates should now happen at 30Hz, physics at 60Hz. (By default, use Python to set.) Some actuators still run at framerate (IPO, Action) for nice smooth animation, and an excuse to buy high end hardware. Keyboard sensors can now hook escape key. Ctrl-Break can be used from within blender if you've forgotten an end game actuator. Fixed a stupid bug preventing some actuators working (like TrackTo).
2004-10-16 11:41:50 +00:00
tmpmesh = BL_ConvertMesh(
Initial revision
2002-10-12 11:37:38 +00:00
editobact->me,
blenderobject,
rendertools,
scene,
converter
);
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
KX_SCA_ReplaceMeshActuator* tmpreplaceact
= new KX_SCA_ReplaceMeshActuator(
Initial revision
2002-10-12 11:37:38 +00:00
gameobj,
tmpmesh,
scene
);
baseact = tmpreplaceact;
}
break;
case ACT_EDOB_TRACK_TO:
{
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
SCA_IObject* originalval = NULL;
Initial revision
2002-10-12 11:37:38 +00:00
if (editobact->ob)
Switch fixed time system. Logic updates should now happen at 30Hz, physics at 60Hz. (By default, use Python to set.) Some actuators still run at framerate (IPO, Action) for nice smooth animation, and an excuse to buy high end hardware. Keyboard sensors can now hook escape key. Ctrl-Break can be used from within blender if you've forgotten an end game actuator. Fixed a stupid bug preventing some actuators working (like TrackTo).
2004-10-16 11:41:50 +00:00
originalval = converter->FindGameObject(editobact->ob);
Initial revision
2002-10-12 11:37:38 +00:00
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
KX_TrackToActuator* tmptrackact
= new KX_TrackToActuator(gameobj,
Initial revision
2002-10-12 11:37:38 +00:00
originalval,
editobact->time,
editobact->flag,
blenderobject->trackflag,
blenderobject->upflag
);
baseact = tmptrackact;
BGE patch 15044 approved: Edit Object Dynamics Actuator. Add enable/disable dynamics actuator under the "Edit Object" category. The Enable/disable rigid body option is also availale but not implemented.
2008-06-25 14:09:15 +00:00
break;
}
case ACT_EDOB_DYNAMICS:
{
KX_SCA_DynamicActuator* tmpdynact
= new KX_SCA_DynamicActuator(gameobj,
editobact->dyn_operation
);
baseact = tmpdynact;
Initial revision
2002-10-12 11:37:38 +00:00
}
}
break;
}
case ACT_CONSTRAINT:
{
float min = 0.0, max = 0.0;
BGE logic update: new servo control motion actuator, new distance constraint actuator, new orientation constraint actuator, new actuator sensor. General ======= - Removal of Damp option in motion actuator (replaced by Servo control motion). - No PyDoc at present, will be added soon. Generalization of the Lvl option ================================ A sensor with the Lvl option selected will always produce an event at the start of the game or when entering a state or at object creation. The event will be positive or negative depending of the sensor condition. A negative pulse makes sense when used with a NAND controller: it will be converted into an actuator activation. Servo control motion ==================== A new variant of the motion actuator allows to control speed with force. The control if of type "PID" (Propotional, Integral, Derivate): the force is automatically adapted to achieve the target speed. All the parameters of the servo controller are configurable. The result is a great variety of motion style: anysotropic friction, flying, sliding, pseudo Dloc... This actuator should be used in preference to Dloc and LinV as it produces more fluid movements and avoids the collision problem with Dloc. LinV : target speed as (X,Y,Z) vector in local or world coordinates (mostly useful in local coordinates). Limit: the force can be limited along each axis (in the same coordinates of LinV). No limitation means that the force will grow as large as necessary to achieve the target speed along that axis. Set a max value to limit the accelaration along an axis (slow start) and set a min value (negative) to limit the brake force. P: Proportional coefficient of servo controller, don't set directly unless you know what you're doing. I: Integral coefficient of servo controller. Use low value (<0.1) for slow reaction (sliding), high values (>0.5) for hard control. The P coefficient will be automatically set to 60 times the I coefficient (a reasonable value). D: Derivate coefficient. Leave to 0 unless you know what you're doing. High values create instability. Notes: - This actuator works perfectly in zero friction environment: the PID controller will simulate friction by applying force as needed. - This actuator is compatible with simple Drot motion actuator but not with LinV and Dloc motion. - (0,0,0) is a valid target speed. - All parameters are accessible through Python. Distance constraint actuator ============================ A new variant of the constraint actuator allows to set the distance and orientation relative to a surface. The controller uses a ray to detect the surface (or any object) and adapt the distance and orientation parallel to the surface. Damp: Time constant (in nb of frames) of distance and orientation control. Dist: Select to enable distance control and set target distance. The object will be position at the given distance of surface along the ray direction. Direction: chose a local axis as the ray direction. Range: length of ray. Objecgt within this distance will be detected. N : Select to enable orientation control. The actuator will change the orientation and the location of the object so that it is parallel to the surface at the vertical of the point of contact of the ray. M/P : Select to enable material detection. Default is property detection. Property/Material: name of property/material that the target of ray must have to be detected. If not set, property/ material filter is disabled and any collisioning object within range will be detected. PER : Select to enable persistent operation. Normally the actuator disables itself automatically if the ray does not reach a valid target. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. rotDamp: Time constant (in nb of frame) of orientation control. 0 : use Damp parameter. >0: use a different time constant for orientation. Notes: - If neither N nor Dist options are set, the actuator does not change the position and orientation of the object; it works as a ray sensor. - The ray has no "X-ray" capability: if the first object hit does not have the required property/material, it returns no hit and the actuator disables itself unless PER option is enabled. - This actuator changes the position and orientation but not the speed of the object. This has an important implication in a gravity environment: the gravity will cause the speed to increase although the object seems to stay still (it is repositioned at each frame). The gravity must be compensated in one way or another. the new servo control motion actuator is the simplest way: set the target speed along the ray axis to 0 and the servo control will automatically compensate the gravity. - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important) - All parameters are accessible through Python. Orientation constraint ====================== A new variant of the constraint actuator allows to align an object axis along a global direction. Damp : Time constant (in nb of frames) of orientation control. X,Y,Z: Global coordinates of reference direction. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. Notes: - (X,Y,Z) = (0,0,0) is not a valid direction - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important). - This actuator doesn't change the location and speed. It is compatible with gravity. - All parameters are accessible through Python. Actuator sensor =============== This sensor detects the activation and deactivation of actuators of the same object. The sensor generates a positive pulse when the corresponding sensor is activated and a negative pulse when it is deactivated (the contrary if the Inv option is selected). This is mostly useful to chain actions and to detect the loss of contact of the distance motion actuator. Notes: - Actuators are disabled at the start of the game; if you want to detect the On-Off transition of an actuator after it has been activated at least once, unselect the Lvl and Inv options and use a NAND controller. - Some actuators deactivates themselves immediately after being activated. The sensor detects this situation as an On-Off transition. - The actuator name can be set through Python.
2008-07-04 08:14:50 +00:00
char *prop = NULL;
[GameEngine] Commit all Kester's changes made to the gameengine to restore 2.25 like physics. [SCons] Build with Solid as default when enabling the gameengine in the build process [SCons] Build solid and qhull from the extern directory and link statically against them That was about it. There are a few things that needs double checking: * Makefiles * Projectfiles * All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
2004-03-22 22:02:18 +00:00
KX_ConstraintActuator::KX_CONSTRAINTTYPE locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_NODEF;
Initial revision
2002-10-12 11:37:38 +00:00
bConstraintActuator *conact
= (bConstraintActuator*) bact->data;
/* convert settings... degrees in the ui become radians */
/* internally */
BGE logic update: new servo control motion actuator, new distance constraint actuator, new orientation constraint actuator, new actuator sensor. General ======= - Removal of Damp option in motion actuator (replaced by Servo control motion). - No PyDoc at present, will be added soon. Generalization of the Lvl option ================================ A sensor with the Lvl option selected will always produce an event at the start of the game or when entering a state or at object creation. The event will be positive or negative depending of the sensor condition. A negative pulse makes sense when used with a NAND controller: it will be converted into an actuator activation. Servo control motion ==================== A new variant of the motion actuator allows to control speed with force. The control if of type "PID" (Propotional, Integral, Derivate): the force is automatically adapted to achieve the target speed. All the parameters of the servo controller are configurable. The result is a great variety of motion style: anysotropic friction, flying, sliding, pseudo Dloc... This actuator should be used in preference to Dloc and LinV as it produces more fluid movements and avoids the collision problem with Dloc. LinV : target speed as (X,Y,Z) vector in local or world coordinates (mostly useful in local coordinates). Limit: the force can be limited along each axis (in the same coordinates of LinV). No limitation means that the force will grow as large as necessary to achieve the target speed along that axis. Set a max value to limit the accelaration along an axis (slow start) and set a min value (negative) to limit the brake force. P: Proportional coefficient of servo controller, don't set directly unless you know what you're doing. I: Integral coefficient of servo controller. Use low value (<0.1) for slow reaction (sliding), high values (>0.5) for hard control. The P coefficient will be automatically set to 60 times the I coefficient (a reasonable value). D: Derivate coefficient. Leave to 0 unless you know what you're doing. High values create instability. Notes: - This actuator works perfectly in zero friction environment: the PID controller will simulate friction by applying force as needed. - This actuator is compatible with simple Drot motion actuator but not with LinV and Dloc motion. - (0,0,0) is a valid target speed. - All parameters are accessible through Python. Distance constraint actuator ============================ A new variant of the constraint actuator allows to set the distance and orientation relative to a surface. The controller uses a ray to detect the surface (or any object) and adapt the distance and orientation parallel to the surface. Damp: Time constant (in nb of frames) of distance and orientation control. Dist: Select to enable distance control and set target distance. The object will be position at the given distance of surface along the ray direction. Direction: chose a local axis as the ray direction. Range: length of ray. Objecgt within this distance will be detected. N : Select to enable orientation control. The actuator will change the orientation and the location of the object so that it is parallel to the surface at the vertical of the point of contact of the ray. M/P : Select to enable material detection. Default is property detection. Property/Material: name of property/material that the target of ray must have to be detected. If not set, property/ material filter is disabled and any collisioning object within range will be detected. PER : Select to enable persistent operation. Normally the actuator disables itself automatically if the ray does not reach a valid target. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. rotDamp: Time constant (in nb of frame) of orientation control. 0 : use Damp parameter. >0: use a different time constant for orientation. Notes: - If neither N nor Dist options are set, the actuator does not change the position and orientation of the object; it works as a ray sensor. - The ray has no "X-ray" capability: if the first object hit does not have the required property/material, it returns no hit and the actuator disables itself unless PER option is enabled. - This actuator changes the position and orientation but not the speed of the object. This has an important implication in a gravity environment: the gravity will cause the speed to increase although the object seems to stay still (it is repositioned at each frame). The gravity must be compensated in one way or another. the new servo control motion actuator is the simplest way: set the target speed along the ray axis to 0 and the servo control will automatically compensate the gravity. - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important) - All parameters are accessible through Python. Orientation constraint ====================== A new variant of the constraint actuator allows to align an object axis along a global direction. Damp : Time constant (in nb of frames) of orientation control. X,Y,Z: Global coordinates of reference direction. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. Notes: - (X,Y,Z) = (0,0,0) is not a valid direction - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important). - This actuator doesn't change the location and speed. It is compatible with gravity. - All parameters are accessible through Python. Actuator sensor =============== This sensor detects the activation and deactivation of actuators of the same object. The sensor generates a positive pulse when the corresponding sensor is activated and a negative pulse when it is deactivated (the contrary if the Inv option is selected). This is mostly useful to chain actions and to detect the loss of contact of the distance motion actuator. Notes: - Actuators are disabled at the start of the game; if you want to detect the On-Off transition of an actuator after it has been activated at least once, unselect the Lvl and Inv options and use a NAND controller. - Some actuators deactivates themselves immediately after being activated. The sensor detects this situation as an On-Off transition. - The actuator name can be set through Python.
2008-07-04 08:14:50 +00:00
if (conact->type == ACT_CONST_TYPE_ORI) {
BGE patch: Add min/max parameters to orientation constraint actuator The min/max parameters define a minimum/maximum angle that the object axis can have with the reference direction without being constrainted. The angle is expressed in degree and is limited to 0-180 range. The min/max parameters define a conical free zone around the reference direction. If the object axis is outside that free zone, the actuator will tend to put it back using as a temporary reference direction the vector that is exactly at min or max degree of the reference direction (depending if the axis angle is below the minimum or above the maximum) and is located in the plane formed by the axis and the reference direction. With a low damping value, this is equivalent to clamping the axis orientation within min/max degree of the reference direction. Backward compatibility corresponds to the absence of free zone: min = max = 0.
2008-07-22 23:05:06 +00:00
min = (MT_2_PI * conact->minloc[0])/360.0;
max = (MT_2_PI * conact->maxloc[0])/360.0;
BGE logic update: new servo control motion actuator, new distance constraint actuator, new orientation constraint actuator, new actuator sensor. General ======= - Removal of Damp option in motion actuator (replaced by Servo control motion). - No PyDoc at present, will be added soon. Generalization of the Lvl option ================================ A sensor with the Lvl option selected will always produce an event at the start of the game or when entering a state or at object creation. The event will be positive or negative depending of the sensor condition. A negative pulse makes sense when used with a NAND controller: it will be converted into an actuator activation. Servo control motion ==================== A new variant of the motion actuator allows to control speed with force. The control if of type "PID" (Propotional, Integral, Derivate): the force is automatically adapted to achieve the target speed. All the parameters of the servo controller are configurable. The result is a great variety of motion style: anysotropic friction, flying, sliding, pseudo Dloc... This actuator should be used in preference to Dloc and LinV as it produces more fluid movements and avoids the collision problem with Dloc. LinV : target speed as (X,Y,Z) vector in local or world coordinates (mostly useful in local coordinates). Limit: the force can be limited along each axis (in the same coordinates of LinV). No limitation means that the force will grow as large as necessary to achieve the target speed along that axis. Set a max value to limit the accelaration along an axis (slow start) and set a min value (negative) to limit the brake force. P: Proportional coefficient of servo controller, don't set directly unless you know what you're doing. I: Integral coefficient of servo controller. Use low value (<0.1) for slow reaction (sliding), high values (>0.5) for hard control. The P coefficient will be automatically set to 60 times the I coefficient (a reasonable value). D: Derivate coefficient. Leave to 0 unless you know what you're doing. High values create instability. Notes: - This actuator works perfectly in zero friction environment: the PID controller will simulate friction by applying force as needed. - This actuator is compatible with simple Drot motion actuator but not with LinV and Dloc motion. - (0,0,0) is a valid target speed. - All parameters are accessible through Python. Distance constraint actuator ============================ A new variant of the constraint actuator allows to set the distance and orientation relative to a surface. The controller uses a ray to detect the surface (or any object) and adapt the distance and orientation parallel to the surface. Damp: Time constant (in nb of frames) of distance and orientation control. Dist: Select to enable distance control and set target distance. The object will be position at the given distance of surface along the ray direction. Direction: chose a local axis as the ray direction. Range: length of ray. Objecgt within this distance will be detected. N : Select to enable orientation control. The actuator will change the orientation and the location of the object so that it is parallel to the surface at the vertical of the point of contact of the ray. M/P : Select to enable material detection. Default is property detection. Property/Material: name of property/material that the target of ray must have to be detected. If not set, property/ material filter is disabled and any collisioning object within range will be detected. PER : Select to enable persistent operation. Normally the actuator disables itself automatically if the ray does not reach a valid target. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. rotDamp: Time constant (in nb of frame) of orientation control. 0 : use Damp parameter. >0: use a different time constant for orientation. Notes: - If neither N nor Dist options are set, the actuator does not change the position and orientation of the object; it works as a ray sensor. - The ray has no "X-ray" capability: if the first object hit does not have the required property/material, it returns no hit and the actuator disables itself unless PER option is enabled. - This actuator changes the position and orientation but not the speed of the object. This has an important implication in a gravity environment: the gravity will cause the speed to increase although the object seems to stay still (it is repositioned at each frame). The gravity must be compensated in one way or another. the new servo control motion actuator is the simplest way: set the target speed along the ray axis to 0 and the servo control will automatically compensate the gravity. - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important) - All parameters are accessible through Python. Orientation constraint ====================== A new variant of the constraint actuator allows to align an object axis along a global direction. Damp : Time constant (in nb of frames) of orientation control. X,Y,Z: Global coordinates of reference direction. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. Notes: - (X,Y,Z) = (0,0,0) is not a valid direction - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important). - This actuator doesn't change the location and speed. It is compatible with gravity. - All parameters are accessible through Python. Actuator sensor =============== This sensor detects the activation and deactivation of actuators of the same object. The sensor generates a positive pulse when the corresponding sensor is activated and a negative pulse when it is deactivated (the contrary if the Inv option is selected). This is mostly useful to chain actions and to detect the loss of contact of the distance motion actuator. Notes: - Actuators are disabled at the start of the game; if you want to detect the On-Off transition of an actuator after it has been activated at least once, unselect the Lvl and Inv options and use a NAND controller. - Some actuators deactivates themselves immediately after being activated. The sensor detects this situation as an On-Off transition. - The actuator name can be set through Python.
2008-07-04 08:14:50 +00:00
switch (conact->mode) {
case ACT_CONST_DIRPX:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_ORIX;
break;
case ACT_CONST_DIRPY:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_ORIY;
break;
case ACT_CONST_DIRPZ:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_ORIZ;
break;
}
} else if (conact->type == ACT_CONST_TYPE_DIST) {
switch (conact->mode) {
case ACT_CONST_DIRPX:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_DIRPX;
min = conact->minloc[0];
max = conact->maxloc[0];
break;
case ACT_CONST_DIRPY:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_DIRPY;
min = conact->minloc[1];
max = conact->maxloc[1];
break;
case ACT_CONST_DIRPZ:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_DIRPZ;
min = conact->minloc[2];
max = conact->maxloc[2];
break;
BGE patch: Add PyDoc for new logic bricks, set exception message on Py error, remove args on Py functions that don't take any to save CPU time
2008-07-23 21:37:37 +00:00
case ACT_CONST_DIRNX:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_DIRNX;
BGE logic update: new servo control motion actuator, new distance constraint actuator, new orientation constraint actuator, new actuator sensor. General ======= - Removal of Damp option in motion actuator (replaced by Servo control motion). - No PyDoc at present, will be added soon. Generalization of the Lvl option ================================ A sensor with the Lvl option selected will always produce an event at the start of the game or when entering a state or at object creation. The event will be positive or negative depending of the sensor condition. A negative pulse makes sense when used with a NAND controller: it will be converted into an actuator activation. Servo control motion ==================== A new variant of the motion actuator allows to control speed with force. The control if of type "PID" (Propotional, Integral, Derivate): the force is automatically adapted to achieve the target speed. All the parameters of the servo controller are configurable. The result is a great variety of motion style: anysotropic friction, flying, sliding, pseudo Dloc... This actuator should be used in preference to Dloc and LinV as it produces more fluid movements and avoids the collision problem with Dloc. LinV : target speed as (X,Y,Z) vector in local or world coordinates (mostly useful in local coordinates). Limit: the force can be limited along each axis (in the same coordinates of LinV). No limitation means that the force will grow as large as necessary to achieve the target speed along that axis. Set a max value to limit the accelaration along an axis (slow start) and set a min value (negative) to limit the brake force. P: Proportional coefficient of servo controller, don't set directly unless you know what you're doing. I: Integral coefficient of servo controller. Use low value (<0.1) for slow reaction (sliding), high values (>0.5) for hard control. The P coefficient will be automatically set to 60 times the I coefficient (a reasonable value). D: Derivate coefficient. Leave to 0 unless you know what you're doing. High values create instability. Notes: - This actuator works perfectly in zero friction environment: the PID controller will simulate friction by applying force as needed. - This actuator is compatible with simple Drot motion actuator but not with LinV and Dloc motion. - (0,0,0) is a valid target speed. - All parameters are accessible through Python. Distance constraint actuator ============================ A new variant of the constraint actuator allows to set the distance and orientation relative to a surface. The controller uses a ray to detect the surface (or any object) and adapt the distance and orientation parallel to the surface. Damp: Time constant (in nb of frames) of distance and orientation control. Dist: Select to enable distance control and set target distance. The object will be position at the given distance of surface along the ray direction. Direction: chose a local axis as the ray direction. Range: length of ray. Objecgt within this distance will be detected. N : Select to enable orientation control. The actuator will change the orientation and the location of the object so that it is parallel to the surface at the vertical of the point of contact of the ray. M/P : Select to enable material detection. Default is property detection. Property/Material: name of property/material that the target of ray must have to be detected. If not set, property/ material filter is disabled and any collisioning object within range will be detected. PER : Select to enable persistent operation. Normally the actuator disables itself automatically if the ray does not reach a valid target. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. rotDamp: Time constant (in nb of frame) of orientation control. 0 : use Damp parameter. >0: use a different time constant for orientation. Notes: - If neither N nor Dist options are set, the actuator does not change the position and orientation of the object; it works as a ray sensor. - The ray has no "X-ray" capability: if the first object hit does not have the required property/material, it returns no hit and the actuator disables itself unless PER option is enabled. - This actuator changes the position and orientation but not the speed of the object. This has an important implication in a gravity environment: the gravity will cause the speed to increase although the object seems to stay still (it is repositioned at each frame). The gravity must be compensated in one way or another. the new servo control motion actuator is the simplest way: set the target speed along the ray axis to 0 and the servo control will automatically compensate the gravity. - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important) - All parameters are accessible through Python. Orientation constraint ====================== A new variant of the constraint actuator allows to align an object axis along a global direction. Damp : Time constant (in nb of frames) of orientation control. X,Y,Z: Global coordinates of reference direction. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. Notes: - (X,Y,Z) = (0,0,0) is not a valid direction - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important). - This actuator doesn't change the location and speed. It is compatible with gravity. - All parameters are accessible through Python. Actuator sensor =============== This sensor detects the activation and deactivation of actuators of the same object. The sensor generates a positive pulse when the corresponding sensor is activated and a negative pulse when it is deactivated (the contrary if the Inv option is selected). This is mostly useful to chain actions and to detect the loss of contact of the distance motion actuator. Notes: - Actuators are disabled at the start of the game; if you want to detect the On-Off transition of an actuator after it has been activated at least once, unselect the Lvl and Inv options and use a NAND controller. - Some actuators deactivates themselves immediately after being activated. The sensor detects this situation as an On-Off transition. - The actuator name can be set through Python.
2008-07-04 08:14:50 +00:00
min = conact->minloc[0];
max = conact->maxloc[0];
break;
BGE patch: Add PyDoc for new logic bricks, set exception message on Py error, remove args on Py functions that don't take any to save CPU time
2008-07-23 21:37:37 +00:00
case ACT_CONST_DIRNY:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_DIRNY;
BGE logic update: new servo control motion actuator, new distance constraint actuator, new orientation constraint actuator, new actuator sensor. General ======= - Removal of Damp option in motion actuator (replaced by Servo control motion). - No PyDoc at present, will be added soon. Generalization of the Lvl option ================================ A sensor with the Lvl option selected will always produce an event at the start of the game or when entering a state or at object creation. The event will be positive or negative depending of the sensor condition. A negative pulse makes sense when used with a NAND controller: it will be converted into an actuator activation. Servo control motion ==================== A new variant of the motion actuator allows to control speed with force. The control if of type "PID" (Propotional, Integral, Derivate): the force is automatically adapted to achieve the target speed. All the parameters of the servo controller are configurable. The result is a great variety of motion style: anysotropic friction, flying, sliding, pseudo Dloc... This actuator should be used in preference to Dloc and LinV as it produces more fluid movements and avoids the collision problem with Dloc. LinV : target speed as (X,Y,Z) vector in local or world coordinates (mostly useful in local coordinates). Limit: the force can be limited along each axis (in the same coordinates of LinV). No limitation means that the force will grow as large as necessary to achieve the target speed along that axis. Set a max value to limit the accelaration along an axis (slow start) and set a min value (negative) to limit the brake force. P: Proportional coefficient of servo controller, don't set directly unless you know what you're doing. I: Integral coefficient of servo controller. Use low value (<0.1) for slow reaction (sliding), high values (>0.5) for hard control. The P coefficient will be automatically set to 60 times the I coefficient (a reasonable value). D: Derivate coefficient. Leave to 0 unless you know what you're doing. High values create instability. Notes: - This actuator works perfectly in zero friction environment: the PID controller will simulate friction by applying force as needed. - This actuator is compatible with simple Drot motion actuator but not with LinV and Dloc motion. - (0,0,0) is a valid target speed. - All parameters are accessible through Python. Distance constraint actuator ============================ A new variant of the constraint actuator allows to set the distance and orientation relative to a surface. The controller uses a ray to detect the surface (or any object) and adapt the distance and orientation parallel to the surface. Damp: Time constant (in nb of frames) of distance and orientation control. Dist: Select to enable distance control and set target distance. The object will be position at the given distance of surface along the ray direction. Direction: chose a local axis as the ray direction. Range: length of ray. Objecgt within this distance will be detected. N : Select to enable orientation control. The actuator will change the orientation and the location of the object so that it is parallel to the surface at the vertical of the point of contact of the ray. M/P : Select to enable material detection. Default is property detection. Property/Material: name of property/material that the target of ray must have to be detected. If not set, property/ material filter is disabled and any collisioning object within range will be detected. PER : Select to enable persistent operation. Normally the actuator disables itself automatically if the ray does not reach a valid target. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. rotDamp: Time constant (in nb of frame) of orientation control. 0 : use Damp parameter. >0: use a different time constant for orientation. Notes: - If neither N nor Dist options are set, the actuator does not change the position and orientation of the object; it works as a ray sensor. - The ray has no "X-ray" capability: if the first object hit does not have the required property/material, it returns no hit and the actuator disables itself unless PER option is enabled. - This actuator changes the position and orientation but not the speed of the object. This has an important implication in a gravity environment: the gravity will cause the speed to increase although the object seems to stay still (it is repositioned at each frame). The gravity must be compensated in one way or another. the new servo control motion actuator is the simplest way: set the target speed along the ray axis to 0 and the servo control will automatically compensate the gravity. - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important) - All parameters are accessible through Python. Orientation constraint ====================== A new variant of the constraint actuator allows to align an object axis along a global direction. Damp : Time constant (in nb of frames) of orientation control. X,Y,Z: Global coordinates of reference direction. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. Notes: - (X,Y,Z) = (0,0,0) is not a valid direction - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important). - This actuator doesn't change the location and speed. It is compatible with gravity. - All parameters are accessible through Python. Actuator sensor =============== This sensor detects the activation and deactivation of actuators of the same object. The sensor generates a positive pulse when the corresponding sensor is activated and a negative pulse when it is deactivated (the contrary if the Inv option is selected). This is mostly useful to chain actions and to detect the loss of contact of the distance motion actuator. Notes: - Actuators are disabled at the start of the game; if you want to detect the On-Off transition of an actuator after it has been activated at least once, unselect the Lvl and Inv options and use a NAND controller. - Some actuators deactivates themselves immediately after being activated. The sensor detects this situation as an On-Off transition. - The actuator name can be set through Python.
2008-07-04 08:14:50 +00:00
min = conact->minloc[1];
max = conact->maxloc[1];
break;
BGE patch: Add PyDoc for new logic bricks, set exception message on Py error, remove args on Py functions that don't take any to save CPU time
2008-07-23 21:37:37 +00:00
case ACT_CONST_DIRNZ:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_DIRNZ;
BGE logic update: new servo control motion actuator, new distance constraint actuator, new orientation constraint actuator, new actuator sensor. General ======= - Removal of Damp option in motion actuator (replaced by Servo control motion). - No PyDoc at present, will be added soon. Generalization of the Lvl option ================================ A sensor with the Lvl option selected will always produce an event at the start of the game or when entering a state or at object creation. The event will be positive or negative depending of the sensor condition. A negative pulse makes sense when used with a NAND controller: it will be converted into an actuator activation. Servo control motion ==================== A new variant of the motion actuator allows to control speed with force. The control if of type "PID" (Propotional, Integral, Derivate): the force is automatically adapted to achieve the target speed. All the parameters of the servo controller are configurable. The result is a great variety of motion style: anysotropic friction, flying, sliding, pseudo Dloc... This actuator should be used in preference to Dloc and LinV as it produces more fluid movements and avoids the collision problem with Dloc. LinV : target speed as (X,Y,Z) vector in local or world coordinates (mostly useful in local coordinates). Limit: the force can be limited along each axis (in the same coordinates of LinV). No limitation means that the force will grow as large as necessary to achieve the target speed along that axis. Set a max value to limit the accelaration along an axis (slow start) and set a min value (negative) to limit the brake force. P: Proportional coefficient of servo controller, don't set directly unless you know what you're doing. I: Integral coefficient of servo controller. Use low value (<0.1) for slow reaction (sliding), high values (>0.5) for hard control. The P coefficient will be automatically set to 60 times the I coefficient (a reasonable value). D: Derivate coefficient. Leave to 0 unless you know what you're doing. High values create instability. Notes: - This actuator works perfectly in zero friction environment: the PID controller will simulate friction by applying force as needed. - This actuator is compatible with simple Drot motion actuator but not with LinV and Dloc motion. - (0,0,0) is a valid target speed. - All parameters are accessible through Python. Distance constraint actuator ============================ A new variant of the constraint actuator allows to set the distance and orientation relative to a surface. The controller uses a ray to detect the surface (or any object) and adapt the distance and orientation parallel to the surface. Damp: Time constant (in nb of frames) of distance and orientation control. Dist: Select to enable distance control and set target distance. The object will be position at the given distance of surface along the ray direction. Direction: chose a local axis as the ray direction. Range: length of ray. Objecgt within this distance will be detected. N : Select to enable orientation control. The actuator will change the orientation and the location of the object so that it is parallel to the surface at the vertical of the point of contact of the ray. M/P : Select to enable material detection. Default is property detection. Property/Material: name of property/material that the target of ray must have to be detected. If not set, property/ material filter is disabled and any collisioning object within range will be detected. PER : Select to enable persistent operation. Normally the actuator disables itself automatically if the ray does not reach a valid target. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. rotDamp: Time constant (in nb of frame) of orientation control. 0 : use Damp parameter. >0: use a different time constant for orientation. Notes: - If neither N nor Dist options are set, the actuator does not change the position and orientation of the object; it works as a ray sensor. - The ray has no "X-ray" capability: if the first object hit does not have the required property/material, it returns no hit and the actuator disables itself unless PER option is enabled. - This actuator changes the position and orientation but not the speed of the object. This has an important implication in a gravity environment: the gravity will cause the speed to increase although the object seems to stay still (it is repositioned at each frame). The gravity must be compensated in one way or another. the new servo control motion actuator is the simplest way: set the target speed along the ray axis to 0 and the servo control will automatically compensate the gravity. - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important) - All parameters are accessible through Python. Orientation constraint ====================== A new variant of the constraint actuator allows to align an object axis along a global direction. Damp : Time constant (in nb of frames) of orientation control. X,Y,Z: Global coordinates of reference direction. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. Notes: - (X,Y,Z) = (0,0,0) is not a valid direction - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important). - This actuator doesn't change the location and speed. It is compatible with gravity. - All parameters are accessible through Python. Actuator sensor =============== This sensor detects the activation and deactivation of actuators of the same object. The sensor generates a positive pulse when the corresponding sensor is activated and a negative pulse when it is deactivated (the contrary if the Inv option is selected). This is mostly useful to chain actions and to detect the loss of contact of the distance motion actuator. Notes: - Actuators are disabled at the start of the game; if you want to detect the On-Off transition of an actuator after it has been activated at least once, unselect the Lvl and Inv options and use a NAND controller. - Some actuators deactivates themselves immediately after being activated. The sensor detects this situation as an On-Off transition. - The actuator name can be set through Python.
2008-07-04 08:14:50 +00:00
min = conact->minloc[2];
max = conact->maxloc[2];
break;
}
prop = conact->matprop;
} else {
switch (conact->flag) {
case ACT_CONST_LOCX:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_LOCX;
min = conact->minloc[0];
max = conact->maxloc[0];
break;
case ACT_CONST_LOCY:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_LOCY;
min = conact->minloc[1];
max = conact->maxloc[1];
break;
case ACT_CONST_LOCZ:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_LOCZ;
min = conact->minloc[2];
max = conact->maxloc[2];
break;
case ACT_CONST_ROTX:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_ROTX;
min = MT_2_PI * conact->minrot[0] / 360.0;
max = MT_2_PI * conact->maxrot[0] / 360.0;
break;
case ACT_CONST_ROTY:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_ROTY;
min = MT_2_PI * conact->minrot[1] / 360.0;
max = MT_2_PI * conact->maxrot[1] / 360.0;
break;
case ACT_CONST_ROTZ:
locrot = KX_ConstraintActuator::KX_ACT_CONSTRAINT_ROTZ;
min = MT_2_PI * conact->minrot[2] / 360.0;
max = MT_2_PI * conact->maxrot[2] / 360.0;
break;
default:
; /* error */
}
Initial revision
2002-10-12 11:37:38 +00:00
}
KX_ConstraintActuator *tmpconact
= new KX_ConstraintActuator(gameobj,
BGE logic update: new servo control motion actuator, new distance constraint actuator, new orientation constraint actuator, new actuator sensor. General ======= - Removal of Damp option in motion actuator (replaced by Servo control motion). - No PyDoc at present, will be added soon. Generalization of the Lvl option ================================ A sensor with the Lvl option selected will always produce an event at the start of the game or when entering a state or at object creation. The event will be positive or negative depending of the sensor condition. A negative pulse makes sense when used with a NAND controller: it will be converted into an actuator activation. Servo control motion ==================== A new variant of the motion actuator allows to control speed with force. The control if of type "PID" (Propotional, Integral, Derivate): the force is automatically adapted to achieve the target speed. All the parameters of the servo controller are configurable. The result is a great variety of motion style: anysotropic friction, flying, sliding, pseudo Dloc... This actuator should be used in preference to Dloc and LinV as it produces more fluid movements and avoids the collision problem with Dloc. LinV : target speed as (X,Y,Z) vector in local or world coordinates (mostly useful in local coordinates). Limit: the force can be limited along each axis (in the same coordinates of LinV). No limitation means that the force will grow as large as necessary to achieve the target speed along that axis. Set a max value to limit the accelaration along an axis (slow start) and set a min value (negative) to limit the brake force. P: Proportional coefficient of servo controller, don't set directly unless you know what you're doing. I: Integral coefficient of servo controller. Use low value (<0.1) for slow reaction (sliding), high values (>0.5) for hard control. The P coefficient will be automatically set to 60 times the I coefficient (a reasonable value). D: Derivate coefficient. Leave to 0 unless you know what you're doing. High values create instability. Notes: - This actuator works perfectly in zero friction environment: the PID controller will simulate friction by applying force as needed. - This actuator is compatible with simple Drot motion actuator but not with LinV and Dloc motion. - (0,0,0) is a valid target speed. - All parameters are accessible through Python. Distance constraint actuator ============================ A new variant of the constraint actuator allows to set the distance and orientation relative to a surface. The controller uses a ray to detect the surface (or any object) and adapt the distance and orientation parallel to the surface. Damp: Time constant (in nb of frames) of distance and orientation control. Dist: Select to enable distance control and set target distance. The object will be position at the given distance of surface along the ray direction. Direction: chose a local axis as the ray direction. Range: length of ray. Objecgt within this distance will be detected. N : Select to enable orientation control. The actuator will change the orientation and the location of the object so that it is parallel to the surface at the vertical of the point of contact of the ray. M/P : Select to enable material detection. Default is property detection. Property/Material: name of property/material that the target of ray must have to be detected. If not set, property/ material filter is disabled and any collisioning object within range will be detected. PER : Select to enable persistent operation. Normally the actuator disables itself automatically if the ray does not reach a valid target. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. rotDamp: Time constant (in nb of frame) of orientation control. 0 : use Damp parameter. >0: use a different time constant for orientation. Notes: - If neither N nor Dist options are set, the actuator does not change the position and orientation of the object; it works as a ray sensor. - The ray has no "X-ray" capability: if the first object hit does not have the required property/material, it returns no hit and the actuator disables itself unless PER option is enabled. - This actuator changes the position and orientation but not the speed of the object. This has an important implication in a gravity environment: the gravity will cause the speed to increase although the object seems to stay still (it is repositioned at each frame). The gravity must be compensated in one way or another. the new servo control motion actuator is the simplest way: set the target speed along the ray axis to 0 and the servo control will automatically compensate the gravity. - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important) - All parameters are accessible through Python. Orientation constraint ====================== A new variant of the constraint actuator allows to align an object axis along a global direction. Damp : Time constant (in nb of frames) of orientation control. X,Y,Z: Global coordinates of reference direction. time : Maximum activation time of actuator. 0 : unlimited. >0: number of frames before automatic deactivation. Notes: - (X,Y,Z) = (0,0,0) is not a valid direction - This actuator changes the orientation of the object and will conflict with Drot motion unless it is placed BEFORE the Drot motion actuator (the order of actuator is important). - This actuator doesn't change the location and speed. It is compatible with gravity. - All parameters are accessible through Python. Actuator sensor =============== This sensor detects the activation and deactivation of actuators of the same object. The sensor generates a positive pulse when the corresponding sensor is activated and a negative pulse when it is deactivated (the contrary if the Inv option is selected). This is mostly useful to chain actions and to detect the loss of contact of the distance motion actuator. Notes: - Actuators are disabled at the start of the game; if you want to detect the On-Off transition of an actuator after it has been activated at least once, unselect the Lvl and Inv options and use a NAND controller. - Some actuators deactivates themselves immediately after being activated. The sensor detects this situation as an On-Off transition. - The actuator name can be set through Python.
2008-07-04 08:14:50 +00:00
conact->damp,
conact->rotdamp,
min,
max,
conact->maxrot,
locrot,
conact->time,
conact->flag,
prop);
Initial revision
2002-10-12 11:37:38 +00:00
baseact = tmpconact;
break;
}
case ACT_GROUP:
{
// deprecated
}
break;
case ACT_SCENE:
{
bSceneActuator *sceneact = (bSceneActuator *) bact->data;
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
STR_String nextSceneName("");
Initial revision
2002-10-12 11:37:38 +00:00
KX_SceneActuator* tmpsceneact;
int mode = KX_SceneActuator::KX_SCENE_NODEF;
KX_Camera *cam = NULL;
//KX_Scene* scene = NULL;
switch (sceneact->type)
{
case ACT_SCENE_RESUME:
case ACT_SCENE_SUSPEND:
case ACT_SCENE_ADD_FRONT:
case ACT_SCENE_ADD_BACK:
case ACT_SCENE_REMOVE:
case ACT_SCENE_SET:
{
switch (sceneact->type)
{
case ACT_SCENE_RESUME:
mode = KX_SceneActuator::KX_SCENE_RESUME;
break;
case ACT_SCENE_SUSPEND:
mode = KX_SceneActuator::KX_SCENE_SUSPEND;
break;
case ACT_SCENE_ADD_FRONT:
mode = KX_SceneActuator::KX_SCENE_ADD_FRONT_SCENE;
break;
case ACT_SCENE_ADD_BACK:
mode = KX_SceneActuator::KX_SCENE_ADD_BACK_SCENE;
break;
case ACT_SCENE_REMOVE:
mode = KX_SceneActuator::KX_SCENE_REMOVE_SCENE;
break;
case ACT_SCENE_SET:
default:
mode = KX_SceneActuator::KX_SCENE_SET_SCENE;
break;
};
if (sceneact->scene)
{
nextSceneName = sceneact->scene->id.name + 2; // this '2' is necessary to remove prefix 'SC'
}
break;
}
case ACT_SCENE_CAMERA:
fix BGE bug #8309: After Parent Object added to the visual layer, Child Camera won't follow. This bug fix is made of two parts: 1) It's now possible to dynamically add a camera. 2) Empty camera name on a SetCamera actuator now points to the actuator's parent object if this object is a camera. This trick is useful to make current a dynamically created camera: just add a SetCamera actuator on the camera itself and leave the name empty. Later, when the camera is added in the scene with an AddObject actuator, either directly or via a parent object, you just need to activate the actuator to make the newly created camera current. If you set a name on a SetCamera actuator, it will always point to the original camera, even after replication.
2008-04-14 20:54:20 +00:00
mode = KX_SceneActuator::KX_SCENE_SET_CAMERA;
Initial revision
2002-10-12 11:37:38 +00:00
if (sceneact->camera)
{
cam = (KX_Camera*) converter->FindGameObject(sceneact->camera);
}
break;
case ACT_SCENE_RESTART:
{
mode = KX_SceneActuator::KX_SCENE_RESTART;
break;
}
default:
; /* flag error */
}
Convert and use actuators with no target object set. Certain actuators (Add Object/Replace Mesh/Scene/Track To) used to always require a target, or they would not influence the scene. If the actuator target is always set from Python, this could be annoying.
2004-09-19 01:33:08 +00:00
tmpsceneact = new KX_SceneActuator(gameobj,
Initial revision
2002-10-12 11:37:38 +00:00
mode,
scene,
ketsjiEngine,
nextSceneName,
cam);
baseact = tmpsceneact;
break;
}
case ACT_GAME:
{
bGameActuator *gameact = (bGameActuator *) bact->data;
KX_GameActuator* tmpgameact;
STR_String filename = maggiename;
STR_String loadinganimationname = "";
int mode = KX_GameActuator::KX_GAME_NODEF;
switch (gameact->type)
{
case ACT_GAME_LOAD:
{
mode = KX_GameActuator::KX_GAME_LOAD;
filename = gameact->filename;
loadinganimationname = gameact->loadaniname;
break;
}
case ACT_GAME_START:
{
mode = KX_GameActuator::KX_GAME_START;
filename = gameact->filename;
loadinganimationname = gameact->loadaniname;
break;
}
case ACT_GAME_RESTART:
{
mode = KX_GameActuator::KX_GAME_RESTART;
break;
}
case ACT_GAME_QUIT:
{
mode = KX_GameActuator::KX_GAME_QUIT;
break;
}
default:
; /* flag error */
}
tmpgameact = new KX_GameActuator(gameobj,
mode,
filename,
loadinganimationname,
scene,
ketsjiEngine);
baseact = tmpgameact;
break;
}
case ACT_RANDOM:
{
bRandomActuator *randAct
= (bRandomActuator *) bact->data;
unsigned long seedArg = randAct->seed;
SCA_RandomActuator::KX_RANDOMACT_MODE modeArg
= SCA_RandomActuator::KX_RANDOMACT_NODEF;
SCA_RandomActuator *tmprandomact;
float paraArg1 = 0.0;
float paraArg2 = 0.0;
switch (randAct->distribution) {
case ACT_RANDOM_BOOL_CONST:
modeArg = SCA_RandomActuator::KX_RANDOMACT_BOOL_CONST;
paraArg1 = (float) randAct->int_arg_1;
break;
case ACT_RANDOM_BOOL_UNIFORM:
modeArg = SCA_RandomActuator::KX_RANDOMACT_BOOL_UNIFORM;
break;
case ACT_RANDOM_BOOL_BERNOUILLI:
paraArg1 = randAct->float_arg_1;
modeArg = SCA_RandomActuator::KX_RANDOMACT_BOOL_BERNOUILLI;
break;
case ACT_RANDOM_INT_CONST:
modeArg = SCA_RandomActuator::KX_RANDOMACT_INT_CONST;
paraArg1 = (float) randAct->int_arg_1;
break;
case ACT_RANDOM_INT_UNIFORM:
paraArg1 = (float) randAct->int_arg_1;
paraArg2 = (float) randAct->int_arg_2;
modeArg = SCA_RandomActuator::KX_RANDOMACT_INT_UNIFORM;
break;
case ACT_RANDOM_INT_POISSON:
paraArg1 = randAct->float_arg_1;
modeArg = SCA_RandomActuator::KX_RANDOMACT_INT_POISSON;
break;
case ACT_RANDOM_FLOAT_CONST:
paraArg1 = randAct->float_arg_1;
modeArg = SCA_RandomActuator::KX_RANDOMACT_FLOAT_CONST;
break;
case ACT_RANDOM_FLOAT_UNIFORM:
paraArg1 = randAct->float_arg_1;
paraArg2 = randAct->float_arg_2;
modeArg = SCA_RandomActuator::KX_RANDOMACT_FLOAT_UNIFORM;
break;
case ACT_RANDOM_FLOAT_NORMAL:
paraArg1 = randAct->float_arg_1;
paraArg2 = randAct->float_arg_2;
modeArg = SCA_RandomActuator::KX_RANDOMACT_FLOAT_NORMAL;
break;
case ACT_RANDOM_FLOAT_NEGATIVE_EXPONENTIAL:
paraArg1 = randAct->float_arg_1;
modeArg = SCA_RandomActuator::KX_RANDOMACT_FLOAT_NEGATIVE_EXPONENTIAL;
break;
default:
; /* error */
}
tmprandomact = new SCA_RandomActuator(gameobj,
seedArg,
modeArg,
paraArg1,
paraArg2,
randAct->propname);
baseact = tmprandomact;
}
break;
case ACT_VISIBILITY:
{
bVisibilityActuator *vis_act = (bVisibilityActuator *) bact->data;
KX_VisibilityActuator * tmp_vis_act = NULL;
bool v = ((vis_act->flag & ACT_VISIBILITY_INVISIBLE) != 0);
BGE set visible actuator, option to set visibility recursively to make managing visibility for collections of objects a lot easier. BGE Python api's ob.setVisible() also takes an optional recursive arg thats off by default
2008-09-05 16:22:14 +00:00
bool recursive = ((vis_act->flag & ACT_VISIBILITY_RECURSIVE) != 0);
Initial revision
2002-10-12 11:37:38 +00:00
BGE set visible actuator, option to set visibility recursively to make managing visibility for collections of objects a lot easier. BGE Python api's ob.setVisible() also takes an optional recursive arg thats off by default
2008-09-05 16:22:14 +00:00
tmp_vis_act = new KX_VisibilityActuator(gameobj, !v, recursive);
Initial revision
2002-10-12 11:37:38 +00:00
baseact = tmp_vis_act;
}
break;
BGE patch: add state engine support in the logic bricks. This patch introduces a simple state engine system with the logic bricks. This system features full backward compatibility, multiple active states, multiple state transitions, automatic disabling of sensor and actuators, full GUI support and selective display of sensors and actuators. Note: Python API is available but not documented yet. It will be added asap. State internals =============== The state system is object based. The current state mask is stored in the object as a 32 bit value; each bit set in the mask is an active state. The controllers have a state mask too but only one bit can be set: a controller belongs to a single state. The game engine will only execute controllers that belong to active states. Sensors and actuators don't have a state mask but are effectively attached to states via their links to the controllers. Sensors and actuators can be connected to more than one state. When a controller becomes inactive because of a state change, its links to sensors and actuators are temporarily broken (until the state becomes active again). If an actuator gets isolated, i.e all the links to controllers are broken, it is automatically disabled. If a sensor gets isolated, the game engine will stop calling it to save CPU. It will also reset the sensor internal state so that it can react as if the game just started when it gets reconnected to an active controller. For example, an Always sensor in no pulse mode that is connected to a single state (i.e connected to one or more controllers of a single state) will generate a pulse each time the state becomes active. This feature is not available on all sensors, see the notes below. GUI === This system system is fully configurable through the GUI: the object state mask is visible under the object bar in the controller's colum as an array of buttons just like the 3D view layer mask. Click on a state bit to only display the controllers of that state. You can select more than one state with SHIFT-click. The All button sets all the bits so that you can see all the controllers of the object. The Ini button sets the state mask back to the object default state. You can change the default state of object by first selecting the desired state mask and storing using the menu under the State button. If you define a default state mask, it will be loaded into the object state make when you load the blend file or when you run the game under the blenderplayer. However, when you run the game under Blender, the current selected state mask will be used as the startup state for the object. This allows you to test specific state during the game design. The controller display the state they belong to with a new button in the controller header. When you add a new controller, it is added by default in the lowest enabled state. You can change the controller state by clicking on the button and selecting another state. If more than one state is enabled in the object state mask, controllers are grouped by state for more readibility. The new Sta button in the sensor and actuator column header allows you to display only the sensors and actuators that are linked to visible controllers. A new state actuator is available to modify the state during the game. It defines a bit mask and the operation to apply on the current object state mask: Cpy: the bit mask is copied to the object state mask. Add: the bits that set in the bit mask will be turned on in the object state mask. Sub: the bits that set in the bit mask will be turned off in the object state mask. Inv: the bits that set in the bit mask will be inverted in the objecyy state mask. Notes ===== - Although states have no name, a simply convention consists in using the name of the first controller of the state as the state name. The GUI will support that convention by displaying as a hint the name of the first controller of the state when you move the mouse over a state bit of the object state mask or of the state actuator bit mask. - Each object has a state mask and each object can have a state engine but if several objects are part of a logical group, it is recommended to put the state engine only in the main object and to link the controllers of that object to the sensors and actuators of the different objects. - When loading an old blend file, the state mask of all objects and controllers are initialized to 1 so that all the controllers belong to this single state. This ensures backward compatibility with existing game. - When the state actuator is activated at the same time as other actuators, these actuators are guaranteed to execute before being eventually disabled due to the state change. This is useful for example to send a message or update a property at the time of changing the state. - Sensors that depend on underlying resource won't reset fully when they are isolated. By the time they are acticated again, they will behave as follow: * keyboard sensor: keys already pressed won't be detected. The keyboard sensor is only sensitive to new key press. * collision sensor: objects already colliding won't be detected. Only new collisions are detected. * near and radar sensor: same as collision sensor.
2008-06-22 14:23:57 +00:00
case ACT_STATE:
{
bStateActuator *sta_act = (bStateActuator *) bact->data;
KX_StateActuator * tmp_sta_act = NULL;
tmp_sta_act =
new KX_StateActuator(gameobj, sta_act->type, sta_act->mask);
baseact = tmp_sta_act;
}
break;
2d-Filters feature and actuators.
2007-10-22 20:24:26 +00:00
case ACT_2DFILTER:
{
bTwoDFilterActuator *_2dfilter = (bTwoDFilterActuator*) bact->data;
SCA_2DFilterActuator *tmp = NULL;
Initial revision
2002-10-12 11:37:38 +00:00
2d-Filters feature and actuators.
2007-10-22 20:24:26 +00:00
RAS_2DFilterManager::RAS_2DFILTER_MODE filtermode;
switch(_2dfilter->type)
{
case ACT_2DFILTER_MOTIONBLUR:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_MOTIONBLUR;
break;
case ACT_2DFILTER_BLUR:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_BLUR;
break;
case ACT_2DFILTER_SHARPEN:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_SHARPEN;
break;
case ACT_2DFILTER_DILATION:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_DILATION;
break;
case ACT_2DFILTER_EROSION:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_EROSION;
break;
case ACT_2DFILTER_LAPLACIAN:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_LAPLACIAN;
break;
case ACT_2DFILTER_SOBEL:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_SOBEL;
break;
case ACT_2DFILTER_PREWITT:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_PREWITT;
break;
case ACT_2DFILTER_GRAYSCALE:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_GRAYSCALE;
break;
case ACT_2DFILTER_SEPIA:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_SEPIA;
break;
case ACT_2DFILTER_INVERT:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_INVERT;
break;
2d Filters updated, now you can use custom filter and write your own GLSL shader program to filter rendering result.
2007-11-06 12:16:12 +00:00
case ACT_2DFILTER_CUSTOMFILTER:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_CUSTOMFILTER;
break;
2d-Filters feature and actuators.
2007-10-22 20:24:26 +00:00
case ACT_2DFILTER_NOFILTER:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_NOFILTER;
break;
2d Filters updated, now you can use custom filter and write your own GLSL shader program to filter rendering result.
2007-11-06 12:16:12 +00:00
case ACT_2DFILTER_DISABLED:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_DISABLED;
break;
case ACT_2DFILTER_ENABLED:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_ENABLED;
break;
2d-Filters feature and actuators.
2007-10-22 20:24:26 +00:00
default:
filtermode = RAS_2DFilterManager::RAS_2DFILTER_NOFILTER;
break;
}
tmp = new SCA_2DFilterActuator(gameobj, filtermode, _2dfilter->flag,
improvement of 2d-filter custom shader, some bugfixes, now you can use depth buffer and luminance buffer without any settings, also you can use object's properties in a shader
2008-07-12 10:21:37 +00:00
_2dfilter->float_arg,_2dfilter->int_arg,ketsjiEngine->GetRasterizer(),rendertools);
2d-Filters feature and actuators.
2007-10-22 20:24:26 +00:00
2d Filters updated, now you can use custom filter and write your own GLSL shader program to filter rendering result.
2007-11-06 12:16:12 +00:00
if (_2dfilter->text)
{
char *buf;
// this is some blender specific code
buf = txt_to_buf(_2dfilter->text);
if (buf)
{
tmp->SetShaderText(STR_String(buf));
MEM_freeN(buf);
}
}
2d-Filters feature and actuators.
2007-10-22 20:24:26 +00:00
baseact = tmp;
}
break;
Commit patch #8799: Realtime SetParent function in the BGE This patch consists in new KX_GameObject::SetParent() and KX_GameObject::RemoveParent() functions to create and destroy parent relation during game. These functions are accessible through python and through a new actuator KX_ParentActuator. Function documentation in PyDoc. The object keeps its orientation, position and scale when it is parented but will further rotate, move and scale with its parent from that point on. When the parent relation is broken, the object keeps the orientation, position and scale it had at that time. The function has no effect if any of the X/Y/Z scale of the object or its new parent are below Epsilon.
2008-04-06 18:30:52 +00:00
case ACT_PARENT:
{
bParentActuator *parAct = (bParentActuator *) bact->data;
int mode = KX_ParentActuator::KX_PARENT_NODEF;
Merge of first part of changes from the apricot branch, especially the features that are needed to run the game. Compile tested with scons, make, but not cmake, that seems to have an issue not related to these changes. The changes include: * GLSL support in the viewport and game engine, enable in the game menu in textured draw mode. * Synced and merged part of the duplicated blender and gameengine/ gameplayer drawing code. * Further refactoring of game engine drawing code, especially mesh storage changed a lot. * Optimizations in game engine armatures to avoid recomputations. * A python function to get the framerate estimate in game. * An option take object color into account in materials. * An option to restrict shadow casters to a lamp's layers. * Increase from 10 to 18 texture slots for materials, lamps, word. An extra texture slot shows up once the last slot is used. * Memory limit for undo, not enabled by default yet because it needs the .B.blend to be changed. * Multiple undo for image painting. * An offset for dupligroups, so not all objects in a group have to be at the origin.
2008-09-04 20:51:28 +00:00
KX_GameObject *tmpgob = NULL;
Commit patch #8799: Realtime SetParent function in the BGE This patch consists in new KX_GameObject::SetParent() and KX_GameObject::RemoveParent() functions to create and destroy parent relation during game. These functions are accessible through python and through a new actuator KX_ParentActuator. Function documentation in PyDoc. The object keeps its orientation, position and scale when it is parented but will further rotate, move and scale with its parent from that point on. When the parent relation is broken, the object keeps the orientation, position and scale it had at that time. The function has no effect if any of the X/Y/Z scale of the object or its new parent are below Epsilon.
2008-04-06 18:30:52 +00:00
switch(parAct->type)
{
case ACT_PARENT_SET:
mode = KX_ParentActuator::KX_PARENT_SET;
tmpgob = converter->FindGameObject(parAct->ob);
break;
case ACT_PARENT_REMOVE:
mode = KX_ParentActuator::KX_PARENT_REMOVE;
tmpgob = NULL;
break;
}
KX_ParentActuator *tmpparact
= new KX_ParentActuator(gameobj,
mode,
tmpgob);
baseact = tmpparact;
break;
}
Initial revision
2002-10-12 11:37:38 +00:00
default:
; /* generate some error */
}
if (baseact)
{
baseact->SetExecutePriority(executePriority++);
uniquename += "#ACT#";
uniqueint++;
CIntValue* uniqueval = new CIntValue(uniqueint);
uniquename += uniqueval->GetText();
uniqueval->Release();
baseact->SetName(STR_String(bact->name));
//gameobj->SetProperty(uniquename,baseact);
gameobj->AddActuator(baseact);
converter->RegisterGameActuator(baseact, bact);
Various mem leaks related to CValue reference count fixed
2008-03-01 19:46:50 +00:00
// done with baseact, release it
baseact->Release();
Initial revision
2002-10-12 11:37:38 +00:00
}
bact = bact->next;
}
}
2d-Filters feature and actuators.
2007-10-22 20:24:26 +00:00
Reference in New Issue Copy Permalink