blender/source/gameengine/Ketsji/KX_IPO_SGController.h

124 lines
3.4 KiB
C
Raw Normal View History

2002-10-12 11:37:38 +00:00
/**
* $Id$
*
* ***** BEGIN GPL LICENSE BLOCK *****
2002-10-12 11:37:38 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
2002-10-12 11:37:38 +00:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
* ***** END GPL LICENSE BLOCK *****
2002-10-12 11:37:38 +00:00
*/
#ifndef __IPO_SGCONTROLLER_H
#define __IPO_SGCONTROLLER_H
#include "SG_Controller.h"
#include "SG_Spatial.h"
#include "KX_IPOTransform.h"
#include "KX_IInterpolator.h"
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
#define KX_MAX_IPO_CHANNELS 19 //note- [0] is not used
2002-10-12 11:37:38 +00:00
class KX_IpoSGController : public SG_Controller
{
KX_IPOTransform m_ipo_xform;
T_InterpolatorList m_interpolators;
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
/** Flag for each IPO channel that can be applied to a game object */
bool m_ipo_channels_active[KX_MAX_IPO_CHANNELS];
2002-10-12 11:37:38 +00:00
/** Interpret the ipo as a force rather than a displacement? */
bool m_ipo_as_force;
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
/** Add Ipo curve to current loc/rot/scale */
bool m_ipo_add;
/** Ipo must be applied in local coordinate rather than in global coordinates (used for force and Add mode)*/
bool m_ipo_local;
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
2002-10-12 11:37:38 +00:00
/** Were settings altered since the last update? */
bool m_modified;
/** Local time of this ipo.*/
double m_ipotime;
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
/** Location of the object when the IPO is first fired (for local transformations) */
class MT_Point3 m_ipo_start_point;
/** Orientation of the object when the IPO is first fired (for local transformations) */
class MT_Matrix3x3 m_ipo_start_orient;
/** Scale of the object when the IPO is first fired (for local transformations) */
class MT_Vector3 m_ipo_start_scale;
/** if IPO initial position has been set for local normal IPO */
bool m_ipo_start_initialized;
/** Euler angles at the start of the game, needed for incomplete ROT Ipo curves */
class MT_Vector3 m_ipo_start_euler;
/** true is m_ipo_start_euler has been initialized */
bool m_ipo_euler_initialized;
2002-10-12 11:37:38 +00:00
/** A reference to the original game object. */
class KX_GameObject* m_game_object;
public:
KX_IpoSGController();
virtual ~KX_IpoSGController();
virtual SG_Controller* GetReplica(class SG_Node* destnode);
void
SetOption(
int option,
int value
);
/** Set sumo data. */
void UpdateSumoReference();
/** Set reference to the corresponding game object. */
void SetGameObject(class KX_GameObject*);
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
void SetIPOChannelActive(int index, bool value) {
//indexes found in makesdna\DNA_ipo_types.h
m_ipo_channels_active[index] = value;
2002-10-12 11:37:38 +00:00
}
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
2002-10-12 11:37:38 +00:00
KX_IPOTransform& GetIPOTransform()
{
return m_ipo_xform;
}
void AddInterpolator(KX_IInterpolator* interp);
virtual bool Update(double time);
virtual void SetSimulatedTime(double time)
{
m_ipotime = time;
m_modified = true;
}
};
2002-10-12 11:37:38 +00:00
#endif //__IPO_SGCONTROLLER_H
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00