This is yet another debug option that allows to render an arbitrary
simulation field by using a color ramp to inspect its voxel values.
Note that when using this, fire rendering is turned off.
Reviewers: plasmasolutions, gottfried
Differential Revision: https://developer.blender.org/D1733
The 'local' layers were not correctly set when redoing 'add object'
addons using object_utils.py helper (we always want to restore layers
from view in local view, even if we set 'real' layers from operator
afterwards).
Using context manager for output file itself, and whole try/except block
to at least catch and print error in file.
Also some minor tweaks to previous 'list add-ons' commit.
Now, the strokes can be locked to a plane set in the cursor location.
This option allow the artist to rotate the view and draw keeping the
strokes flat over the surface. This option is similar to surface option
but doesn't need a object.
The option is only valid for 3D view and strokes in CURSOR mode.
Not really possible to precisely detect all cases in which they should or
should not be active, but at least now it won't show as disabled when it
actually has some effects.
Previously the editor will always try to only show UV faces with the same exact active
image or image texture, which is quite difficult to control on a production shaders, where
each material can have multiple objects assigned.
The idea of this commit is to bring option which allows to easily control what to display
when "Draw Other Objects" is enabled, so currently we can have old behavior ("Same Image")
or tell editor to show everything ("All"). In the future we can extend it with such filters
as "Same Material" and things like that.
Hopefully this will help @eyecandy's workflow of texturing.
If I didn't miss anything these are indeed not used. Old themes should still work (will only print info on redundant theme defines into console), but updated non-contrib themes already.
Apparently the keying sets system doesn't support subclassing
KeyingSetInfo subclasses. I have added a note to the top of the file to
indicate this to future developers.
Previously the pose library used the WholeCharacter key set, which ignores
selection and add keys for almost all bones in the rig. This is a very
slow operation on complex rigs. With this patch, only selected bones are
keyed, defaulting to keying all bones when none are selected.
Note that this fixes the FIXME previously mentioned in the source.
Code was not getting correct boundbox in some cases (group only instancing other groups e.g.), now
compute our own bbox in those cases.
Based on patch by @lichtwerk, but extended the fix to include linked datablocks in some cases
(linked objects in local groups, linked objects in local scene, etc.), this was also broken in existing code.
Reviewers: mont29
Subscribers: duarteframos
Differential Revision: https://developer.blender.org/D2257
- WITH_SMOKE macro was not defined so some code was not compiled, though
it was still accessible from the UI
- some UI elements were disappearing due to bad indentation, also rework
the UI code to not hide but rather disable/grey out button in the UI
- Display thickness was not used due to bad manual merge of the code
from the patch.
This basically exposes to the UI a function that was only available
through a debug macro ; the purpose is obviously to help debugging
simulations. It adds ways to draw the vectors either as colored needles
or as arrows showing the direction of the vectors. The colors are based
on the magnitude of the underlying vectors.
Reviewers: plasmasolutions, gottfried
Differential Revision: https://developer.blender.org/D1733
Current approach uses view aligned slicing to generate polygons for GL
texturing such that the generated polygons are always facing the view
plane. Now it is also possible to use object aligned slicing, which
creates polygons by slicing the object perpendicular to whichever axis
is facing the most the view plane. It is also possible to create a
single slice for inspecting the volume, or for 2D rendering effects.
Settings for this, along with a density multiplier setting, are to be
found in a newly added "Smoke Display Settings" panel in the smoke
domain properties tab.
Reviewers: plasmasolutions, gottfried
Differential Revision: https://developer.blender.org/D1733
It's now possible to change the shortcut for invoking the eyedropper while hovering a button (E by default). Also removed the keymap editor entry for the modal eyedropper keymap, it's now automatically appended to the eyedropper shortcut.
This patch changes a couple of things in the video output encoding.
{F362527}
- Clearer separation between container and codec. No more "format", as this is
too ambiguous. As a result, codecs were removed from the container list.
- Added FFmpeg speed presets, so the user can choosen from the range "Very
slow" to "Ultra fast". By default no preset is used.
- Added Constant Rate Factor (CRF) mode, which allows changing the bit-rate
depending on the desired quality and the input. This generally produces the
best quality videos, at the expense of not knowing the exact bit-rate and
file size.
- Added optional maximum of non-B-frames between B-frames (`max_b_frames`).
- Presets were adjusted for these changes, and new presets added. One of the
new presets is [recommended](https://trac.ffmpeg.org/wiki/Encode/VFX#H.264)
for reviewing videos, as it allows players to scrub through it easily. Might
be nice in weeklies. This preset also requires control over the
`max_b_frames` setting.
GUI-only changes:
- Renamed "MPEG" in the output file format menu with "FFmpeg", as this is more
accurate. After all, FFmpeg is used when this option is chosen, which can
also output non-MPEG files.
- Certain parts of the GUI are disabled when not in use:
- bit rate options are not used when a constant rate factor is given.
- audio bitrate & volume are not used when no audio is exported.
Note that I did not touch `BKE_ffmpeg_preset_set()`. There are currently two
preset systems for FFmpeg (`BKE_ffmpeg_preset_set()` and the Python preset
system). Before we do more work on `BKE_ffmpeg_preset_set()`, I think it's a
good idea to determine whether we want to keep it at all.
After this patch has been accepted, I'd be happy to go through the code and
remove any then-obsolete bits, such as the handling of "XVID" as a container
format.
Reviewers: sergey, mont29, brecht
Subscribers: mpan3, Blendify, brecht, fsiddi
Tags: #bf_blender
Differential Revision: https://developer.blender.org/D2242
Do not close and re-open the file in case it's compressed, gzip module can now directly take a file object as parameter.
Differential Revision: https://developer.blender.org/D2235
Replace the W shortcut for subdivision by a new menu for edit specials
in order to keep consistency in UI.
Subdivision is not used all the time, so it's better assign this
shortcut to menu.
In some situations the artist needs to subdivide a stroke created with
few points before, specially for sculpting.
The subdivision is done for any pair of continuous selected points in
the same stroke.
The operator can be activated in edit mode with W key and has a
parameter for number of cuts.
Previously converting from linear space to SRGB was doing rather
slow inverted 1D lookup. Adding explicit inverse LUT gives 20%
speedup of OpenGL render.
Next question is: why do we even bother with sRGB conversion here,
OpenGL is already in the proper space so in theory we can avoid
quite some color space conversions. In any case, having this case
optimized in nice anyway.
Two new modal operators to create a grease pencil interpolate drawing
for one frame or a complete sequence between two frames. For drawing
the temporary strokes in the viewport, two drawing handlers have been
added to manage 3D and 2D stuff.
Video: https://youtu.be/qxYwO5sSg5Y
The operator shortcuts are Ctrl+E and Ctrl+Shift+E. During the modal
operator, the interpolation can be adjusted using the mouse (moving
left/right) or the wheel mouse.
Based on reading documentation around. This particular version
is based on the ImageMagic documentation which could be found
there:
http://www.imagemagick.org/Usage/filter/http://www.imagemagick.org/Usage/filter/nicolas/
Current filter is based on measuring mean error with the current
splash screen and choosing combination of parameters which
gives minimal mean error.
Image of the result of this patch:
{F352849}
The only thing different from the above image and this patch is I added a colon after "Falloff" after I took the screen shot.
Reviewers: Severin, meta-androcto
Subscribers: plyczkowski
Tags: #bf_blender, #user_interface
Maniphest Tasks: T33436
Differential Revision: https://developer.blender.org/D2195
We did not update them for really long time and the currently used
hashes are quite old and probably wouldn't work without manually
updating all submodules.
Not as if it's something totally crucial (we ask to update submodules
all the times and that's what `make update` does) but updating hashes
will save some cloning/checkout time.
Includes:
- Version bump to 2.78
- Doxy file update
- New splash screen
- Wrapped some do_versions with version check
- Updated template to use proper font
After poking around a lot it seems Droid Sans was used during 2.7x series.
(or at least difference between using this font and comparing to previous
splash screens gives none visible difference).
When using metadata stamping, it's often handy to have "Camera" in
front of the camera name, "Marker" in front of the marker text, etc.,
but sometimes those get in the way. This patch allows an artist to
turn those labels on/off.
Reviewed by: sergey, mont29, venomgfx
Previously, they were in a column alongside the list, but because the lists were
rarely that long, there would always be a large gap left below the list.
A common problem encountered by artists was that they would accidentally move
the 3D cursor while drawing, causing their strokes to end up in weird places in
3D space when viewing the drawing again from other perspectives.
This operator helps fix up this mess by taking the selected strokes, projecting them
to screenspace, and then back to 3D space again. As a result, it should be as if
you had directly drawn the whole thing again, but from the current viewpoint instead.
Unfortunately, if there was originally some depth information present (i.e. you already
started reshaping the sketch in 3D), then that will get lost during this process.
But so far, my tests indicate that this seems to work well enough.
After the GP v2 changes, it wasn't possible to easily set the thickness of strokes
if you didn't know about the pie menus already. This just exposes the same set of
settings.
