This adds the "Select More/Less" operators for Curves. Both operators use the `select_adjacent` function to (de)select adjacent points.
Pull Request #104626
After the removal of the "normal" attribute providers, we no longer
use the concept of read-only attributes. Removing this status simplifies
code, clarifies the design, and removes potentially buggy corner cases.
Pull Request #104795
* Fix#92539: Hard to read the breadcrumbs.
* Fix View Item active, hover, and text color (e.g. count numbers in the
Spreadsheet were almost unreadable).
* Fix mismatching node type colors with the default theme.
Blender Light is meant to be simply a brighter version of the default,
so screenshots and tutorials can be followed with both themes.
* Use the same outline color for widgets, so they match when aligned in a row.
* Make panels standout (not fully transparent), like in the default theme.
The Preferences for asset libraries are becoming more than a simple name
+ path. E.g. there is now an Import Method options, and we previously
also considered a Relative Paths option (which we may still want to
add). The previous UI, while consistent with the Auto Run Python Scripts
UI isn't well suited for less than trivial cases. Using UI lists makes
the UI more scalable and follows usual list UI patterns more. There is
also more space for the path button now.
Part of #104686.
The default import method for an asset library can now be determined in
the Preferences. The Asset Browser has a new "Follow Preferences" option
for the importing. The essentials asset library still only uses "Append
(Reuse Data)".
This is part of #104686, which aims at improving the import method
selection, especially for the introduction of the new essentials library
(which doesn't support certain import methods). Further changes are
coming to improve the UI, see #104686.
Pull Request: #104688
The quick fur operator now uses the new hair system. It adds a new
curves object for every selected mesh, and adds geometry nodes
modifiers from the essentials assets that generate curves. A few
settings are exposed in the redo panel, including an option for whether
to apply the modifier to generate the initial curves so that there is
original editable data.
The point of the operator is to give people a sense of how to use the
node groups and to give a very fast way to build a basic setup for
further tweaking.
Pull Request #104764
Use the right hand side selection, as it fits the typical workflow
the best.
Arguably, the same would need to be done for the k-shortcut, but
that is another issue to be tackled. As well as making the selection
active.
Pull Request #104777
This implements the delete operator in curves edit mode. The behavior
is similar to the delete operator in the edit mode of legacy curves,
i.e. it's actually dissolving and doesn't split curves. This is also
the behavior that we generally want for the hair use case.
The operator is added to the `Curves` menu and can be accessed via
the keyboard using `X` or `Del`.
Pull Request #104765
This adds a new `Curve Falloff` popover to the comb brush tool settings.
The curve control allows changing the brush weight along the curve to
e.g. affect the tip more than the root. This is a relative way to get
something like stiffness for short hair.
This functionality could potentially be added to some other brushes,
but the comb brush is the most important one, so that is added first.
I did add the buttons add the buttons to choose a curve map preset.
However, I did not add the preset dropdown, because that just adds
some unnecessary complexity in the code now and is redundant.
Pull Request #104589
This patch adds a simple operator to set values of the active
attribute for the selected element. The aim is to give simple control
over attribute values in edit mode rather than to provide the fastest
workflow for most cases. Eventually this operator might be less
important compared to more advanced attribute editing tools, but for
now, exposing a little bit of functionality is low hanging fruit and
will help to see the possibilities.
The implementation mostly consists of boilerplate to register the
necessary property types for the operator and draw their UI.
Beyond that, we just loop over selected elements and set a value.
Pull Request #104426
As described in #104171, add an operator that creates a new node group
that contain the current node group and named attribute nodes to deal
with the outputs. This saves manual work when moving a high-level
modifier to the node editor for better procedural control.
Pull Request #104546
This adds a new overlay for curves sculpt mode that displays the curves that the
user currently edits. Those may be different from the evaluated/original curves
when procedural deformations or child curves are used.
The overlay can clash with the evaluated curves when they are exactly on top of
each other. There is not much we can do about that currently. The user will have
to decide whether the overlay should be shown or not on a case-by-case basis.
Pull Request #104467
Sculpt: Added vector displacement for the sculpting draw brush (area plane mapping only for now)
Vector displacement maps (VDM) provide a way to create complex displacements that can have overhangs in one brush dab.
This is unlike standard displacement with height maps that only displace in the normal direction.
Forms like ears, curled horns, etc can be created in one click if VMDs are used.
There is a checkbox on the draw brush in the texture settings "Vector Displacement" that enables/disables this feature.
Technical description: The RGB channels of a texture in a brush stroke are read and interpreted as individual vectors, that are used to offset vertices.
As of now, this is only working for the draw brush using the area plane mapping. Symmetry and radial symmetry are working.
A few things to consider when making VD-Maps:
* UVs need to stay intact for the bake mesh (e.g. voxel remeshing can't be used to create VD Meshes)
* When exporting a VD Map it should be in the file format OpenEXR (for positive and negative floating point values).
* Export resolution can be 512x512 or lower (EXR files can get very large, but VDM brushes don't need a high resolution)
And when using them:
* Inside Blender clamping needs to be unchecked on the texture
* The brush falloff should be set to constant (or nearly constant)
This patch was inspired by this [right-click-select proposal](https://blender.community/c/rightclickselect/WqWx/) Thanks for the post!
(Moved [this patch](https://archive.blender.org/developer/D17080) to here.)
Co-authored-by: Robin Hohnsbeen <robin@hohnsbeen.de>
Pull Request #104481
Matching the RNA id's to the search pattern is slow because
of the function `fnmatchcase`. This patch first checks the string
prefix without any special characters used by fnmatch,
if the `startswith` check fails, there is no need to check `fnmatchcase`.
Before the optimization, an online manual lookup took about 400ms
which is quite noticeable, with this patch applied it's under 10ms.
Ref !104581.
Currently the passepartout color is hardcoded to black. While a
sensible default for cinema, it may make less sense for other media,
whether video, print, web, etc. It greatly affects viewing conditions
of the image and should be user selectable, much like painting
programs allow.
Pull Request #104486
During hair grooming in curves sculpt mode, it is very useful when hair strands
are prevented from intersecting with the surface mesh. Unfortunately, it also
decreases performance significantly so we don't want it to be turned on all the time.
The surface collision is used by the Comb, Pinch and Puff brushes currently.
It can be turned on or off on a per-geometry basis.
The intersection prevention quality of this patch is not perfect yet. This can
be improved over time using a better solver. Overall, perfect collision detection
at the cost of bad performance is not necessary for interactive sculpting,
because the user can fix small mistakes very quickly. Nevertheless, the quality
can probably still be improved significantly without too big slow-downs depending
on the use case. This can be done separately from this patch.
Pull Request #104469
This adds a new `select_linked` function that selects all the points
on a curve if there is at least one point already selected.
This also adds a keymap for the operator.
Co-authored-by: Falk David <falkdavid@gmx.de>
Pull Request #104569
Add `contains_group` method in python api for `NodeTree` type, cleanup
`ntreeHasTree` function, reuse `ntreeHasTree` in more place in code.
The algorithm has been changed to not recheck trees by using set.
Performance gains from avoiding already checked node trees:
Based on tests, can say that for large files with a huge number
of trees, the response speed of opening the search menu in the
node editor increased by ~200 times (for really large projects
with 16 individual groups in 6 levels of nesting). Group insert
operations are also accelerated, but this is different in some cases.
Pull Request #104465
Adds an experimental option under "New Features" in preferences,
which enables visibility of the new Volume Nodes.
Right now this option does nothing but will be used during development.
See #103248
Pull Request #104552
Box-Selecting channels in the dope sheet with click-drag was no longer possible as of Blender 3.2
Due to the removal of tweak events the box select operator was always shadowed by the click operator.
Original Phabricator discussion here: https://archive.blender.org/developer/D17065
Use `WM_operator_flag_only_pass_through_on_press` on click operator to fix it
Co-authored-by: Christoph Lendenfeld <chris.lenden@gmail.com>
Pull Request #104505
The generator now skips these with a warning, they will need to be
corrected in the user manual.
This caused tests/python/bl_rna_manual_reference.py to fail looking
up URL's.
Move the function for getting the language code associated with the
user manual into a utility function (from the generated
rna_manual_reference.py).
This allows other parts of Blender to create a manual URL based on the
current locale preferences and environment.
Ref !104494
Add a new node that groups faces inside of boundary edge regions.
This is the opposite action as the existing "Face Group Boundaries"
node. It's also the same as some of the "Initialize Face Sets"
options in sculpt mode.
Discussion in #102962 has favored "Group" for a name for these
sockets rather than "Set", so that is used here.
Pull Request #104428
This adds a `select_box` function for the `Curves` object. It is used in the `view3d_box_select` operator.
It also adds the basic selection tools in the toolbar of Edit Mode.
Authored-by: Falk David <falkdavid@gmx.de>
Pull Request #104411
- Use bpy.utils.execfile instead of importing then deleting from
sys.modules.
- Add a note for why keeping this cached in memory isn't necessary.
This has the advantage of not interfering with any scripts that import
`rna_manual_reference` as a module.
This allow to bypass all cost associated with shadow mapping.
This can be useful in certain situation, such as opening a scene on a
lower end system or just to gain performance in some situation (lookdev).
Implements virtual shadow mapping for EEVEE-Next primary shadow solution.
This technique aims to deliver really high precision shadowing for many
lights while keeping a relatively low cost.
The technique works by splitting each shadows in tiles that are only
allocated & updated on demand by visible surfaces and volumes.
Local lights use cubemap projection with mipmap level of detail to adapt
the resolution to the receiver distance.
Sun lights use clipmap distribution or cascade distribution (depending on
which is better) for selecting the level of detail with the distance to
the camera.
Current maximum shadow precision for local light is about 1 pixel per 0.01
degrees.
For sun light, the maximum resolution is based on the camera far clip
distance which sets the most coarse clipmap.
## Limitation:
Alpha Blended surfaces might not get correct shadowing in some corner
casses. This is to be fixed in another commit.
While resolution is greatly increase, it is still finite. It is virtually
equivalent to one 8K shadow per shadow cube face and per clipmap level.
There is no filtering present for now.
## Parameters:
Shadow Pool Size: In bytes, amount of GPU memory to dedicate to the
shadow pool (is allocated per viewport).
Shadow Scaling: Scale the shadow resolution. Base resolution should
target subpixel accuracy (within the limitation of the technique).
Related to #93220
Related to #104472
Now a single script to generate both links and release notes. It also includes
the issue ID for the LTS releases, so only the release version needs to be
specified.
Pull Request #104402
There was an inconsistency between geometry sample nodes and mesh/curve
sample nodes, where the latter didn't have a special "Sample" category,
and we categorized as "Operations", which they were not. Also put the
sample category between "Read" and "Write" since the verb name is
more consistent and sampling is an advanced form of reading.
This will add a proper modal keymap for the node link drag operator.
It allows the user to customize the keys used to start drag and so on.
Also it gets rid of the custom status bar message.
Differential Revision: https://developer.blender.org/D17190
The operator has the option to add to selected FCurves instead
of only the active, but it was only exposed in the redo panel.
This patch adds the operator to the right-click menu on FCurve channels,
and to the channel menu in the Graph editor.
Both times with configured to add to selected
instead of only the active FCurve
Revied by Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D17066
Ref: D17066
- Replace type annotations with doc-strings, the current conventions is
not to use type annotations in startup scripts.
- Replace abbreviation "idx" with "index" in public arguments/properties.
- Replace `len(..) > 0` with boolean checks.
- Add `__all__` to list public members.
- Use `arg` instead of `param` for doc-strings.
- Locate the doc-string so it shows as `__doc__`.
Adds two operators to select linked vertices in weight paint mode.
Similar to how it works in edit mode.
Press "L" to select vertices under the cursor,
or CTRL + "L" to select anything linked to the current selection.
Reviewed by: Sybren A. Stüvel, Hans Goudey, Marion Stalke
Differential Revision: https://developer.blender.org/D16848
Ref: D16848
In the previous situation the message was shown for Apple devices.
But this is not correct and confusing.
- Apple with Metal backend are supported, OpenGL on Apple isn't
- Legacy devices on Windows or Linux are also not supported.
This change will check that the capabilities of the GPU match the
requirements to use Viewport compositor. Based on those capabilities
a message is shown and the panel is activated.
Extract:
- EEVEE: Compiling Shaders (the same message exists in EEVEE Next, but
it uses string concatenation and I don't know yet how to deal with
those--see T92758)
Disambiguate:
- Pan (audio, camera)
- Box (TextSequence)
- Mix (noun in constraints, GP materials)
- Volume (object type, file system)
- Floor (math integer part, 3D viewport horizontal plane)
- Impossible to disambiguate the constraint name because
bConstraintTypeInfo doesn't have a context field.
- Show Overlay (in the sequence editor, use the same message as other
editors to avoid a confusion with the Frame Overlay feature, also
called "Show Overlay")
Additionally, fix a few issues reported by Joan Pujolar (@jpujolar)
in T101830.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17114
This operator updates scene strip internal length to reflect target
scene length. Previously scene strip had to be deleted and added from
scratch. Scene strip length in timeline will not be changed.
This adds a new operator: bpy.ops.mesh.flip_quad_tessellation()
This operator rotates the internal loops of the selected quads, allowing
the user to control tessellation without destructively altering the
mesh.
{F14201995}
This operator can be found in the "Face" menu (Ctrl+F) under "Face
Data".
{F14201997}
Reviewed By: campbellbarton, dbystedt
Differential Revision: https://developer.blender.org/D17056
This patch adds a draw_ui_list() function, which is a wrapper around
layout.template_list(). It implements generic add/remove/move buttons,
passing the correct "row" integer to template_list(), as well as a
drop-down menu, if provided, making it a complete solution for
consistent UILists for addons.
Differential Revision: https://developer.blender.org/D14119
Based on T99607:
- Existing Angle Control shortcuts are removed
- Voxel, Dyntopo and Hair resolution shortcuts are remapped to `R`
Since voxel remeshing is not compatible with dyntopo, each can use the shortcut `R` for the remeshing resolution without causing a conflict.
The shortcut `R` is not currently used for anything important.
The angle control menu is commonly not used.
And sculpt mode is only coincidentally inheriting the rotate operator shortcut on `R` because nothing else is mapped to the key.
Reviewed By: Julien Kaspar and Hans Goudey and Joseph Eagar
Differential Revision: https://developer.blender.org/D16511
Ref D16511
This addressed feature request T99811.
Added the following features to fully support importing USDZ archives:
- Added .usdz to the list of supported extensions.
- Added new USD import options to copy textures from USDZ archives. The
textures may be imported as packed data (the default) or to a directory
on disk.
- Extended the USD material import logic to handle package-relative texture
assets paths by invoking the USD asset resolver to copy the textures from
the USDZ archive to a directory on disk. When importing in Packed mode,
the textures are first saved to Blender's temporary session directory
prior to packing.
The new USD import options are
- Import Textures: Behavior when importing textures from a USDZ archive
- Textures Directory: Path to the directory where imported textures will
be copied
- File Name Collision: Behavior when the name of an imported texture file
conflicts with an existing file
Import Textures menu options:
- None: Don't import textures
- Packed: Import textures as packed data (the default)
- Copy: Copy files to Textures Directory
File Name Collision menu options:
- Use Existing: If a file with the same name already exists, use that
instead of copying (the default)
- Overwrite: Overwrite existing files
Reviewed by: Bastien
Differential Revision: https://developer.blender.org/D17074
This commit fixes T100674, Renamed the "axis" label under viewport display
panel to "axes" in object properties.
Differential Revision: https://developer.blender.org/D16650
Rewrite of the Workbench engine using C++ and the new Draw Manager API.
The new engine can be enabled in Blender `Preferences > Experimental > Workbench Next`.
After that, the engine can be selected in `Properties > Scene > Render Engine`.
When `Workbench Next` is the active engine, it also handles the `Solid` viewport mode rendering.
The rewrite aims to be functionally equivalent to the current Workbench engine, but it also includes some small fixes/tweaks:
- `In Front` rendered objects now work correctly with DoF and Shadows.
- The `Sampling > Viewport` setting is actually used when the viewport is in `Render Mode`.
- In `Texture` mode, textured materials also use the material properties. (Previously, only non textured materials would)
To do:
- Sculpt PBVH.
- Volume rendering.
- Hair rendering.
- Use the "no_geom" shader versions for shadow rendering.
- Decide the final API for custom visibility culling (Needed for shadows).
- Profile/optimize.
Known Issues:
- Matcaps are not loaded until they’re shown elsewhere. (e.g. when opening the `Viewort Shading` UI)
- Outlines are drawn between different materials of the same object. (Each material submesh has its own object handle)
Reviewed By: fclem
Maniphest Tasks: T101619
Differential Revision: https://developer.blender.org/D16826
This adds the following operators to edit mode:
- `select_all`
- `select_random`
- `select_end`
Differential Revision: https://developer.blender.org/D17047
This adds a new `Interpolate Curves` node. It allows generating new curves
between a set of existing guide curves. This is essential for procedural hair.
Usage:
- One has to provide a set of guide curves and a set of root positions for
the generated curves. New curves are created starting from these root
positions. The N closest guide curves are used for the interpolation.
- An additional up vector can be provided for every guide curve and
root position. This is typically a surface normal or nothing. This allows
generating child curves that are properly oriented based on the
surface orientation.
- Sometimes a point should only be interpolated using a subset of the
guides. This can be achieved using the `Guide Group ID` and
`Point Group ID` inputs. The curve generated at a specific point will
only take the guides with the same id into account. This allows e.g.
for hair parting.
- The `Max Neighbors` input limits how many guide curves are taken
into account for every interpolated curve.
Differential Revision: https://developer.blender.org/D16642
The name SAFE_AREAS_OT_preset_add lead to "Safe Areas" having it's own
section in the operator API docs. Name CAMERA_OT_safe_areas_preset_add
instead. Keep "safe_areas" as the preset directory for users with
existing presets.
The background evaluation samples the sky discretely, so if the sun is
too small, it can be missed in the evaluation. To solve this, the sun is
ignored during the background evaluation and its contribution is
computed separately.
The lookup table method on CPU and the numerical root finding method on
GPU give quite different results. This commit deletes the Beckmann lookup
table and uses numerical root finding on all devices. For the numerical
root finding, a combined bisection-Newton method with precision control
is used.
Differential Revision: https://developer.blender.org/D17050
wi is the viewing direction, and wo is the illumination direction. Under this notation, BSDF sampling always samples from wi and outputs wo, which is consistent with most of the papers and mitsuba. This order is reversed compared with PBRT, although PBRT also traces from the camera.
The Grease Pencil Material Popover currently has a color picker
for the Stroke of a Material using Solid style, but not one for
a Fill using Solid style.
With the default Grease Pencil Materials, the current
popover only shows the Stroke color for the grey "Solid Fill"
material (which doesn't have its Stroke enabled) instead of
the more useful Fill color.
This patch shows a Stroke color picker when the Material
has Stroke enabled and the style is Solid.
This is the same for the Fill.
Reviewed By: antoniov, mendio
Differential Revision: https://developer.blender.org/D17004
This fixes the UI alignment issues that were introduced by {D12815} with the addition of the boolean custom properties.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D17012
A proper boolean custom property type is commonly requested. This
commit simply adds a new `IDP_BOOLEAN` type that can be used for
boolean and boolean array custom properties. This can also be used
for exposing boolean node sockets in the geometry nodes modifier.
I've just extended the places existing IDProperty types are used, and
tested with the custom property edit operator and the python console.
Adding another IDProperty type is a straightforward extension of the
existing design.
Differential Revision: https://developer.blender.org/D12815
