The build system already sets these properly to the absolute path so no
need to patch the libraries on darwin.
$ otool -D result/lib/liblapacke.dylib
result/lib/liblapacke.dylib:
/nix/store/k88gy5s765yn3dc5ws3jbykyvklm7z96-openblas-0.3.8/lib/libopenblasp-r0.3.8.dylib
Fixes#85713
Previously, callPackage would try and fill the arguments such as `name`
and `src` which would cause problems if those existed as top-level
attributes. This also makes it clearer what part is the function
signature.
Then document the derivation inline in the code to explain the ellipsis
and various use-cases.
This reverts commit b32a057425b337b37db41d3b4a67d39657477c05,
which breaks even the most straightforward uses of srcOnly:
nix-repl> srcOnly guile
error: anonymous function at /home/src/nixpkgs/pkgs/build-support/src-only/default.nix:1:1 called with unexpected argument 'drvPath', at /home/src/nixpkgs/lib/customisation.nix:69:16
nix-repl> srcOnly hello
error: anonymous function at /home/src/nixpkgs/pkgs/build-support/src-only/default.nix:1:1 called with unexpected argument 'drvPath', at /home/src/nixpkgs/lib/customisation.nix:69:16
Link: https://github.com/NixOS/nixpkgs/pull/80903#issuecomment-617172927
This is a better name since we have multiple 64-bit things that could
be referred to.
LP64 : integer=32, long=64, pointer=64
ILP64 : integer=64, long=64, pointer=64
This is based on previous work for switching between BLAS and LAPACK
implementation in Debian[1] and Gentoo[2]. The goal is to have one way
to depend on the BLAS/LAPACK libraries that all packages must use. The
attrs “blas” and “lapack” are used to represent a wrapped BLAS/LAPACK
provider. Derivations that don’t care how BLAS and LAPACK are
implemented can just use blas and lapack directly. If you do care what
you get (perhaps for some CPP), you should verify that blas and lapack
match what you expect with an assertion.
The “blas” package collides with the old “blas” reference
implementation. This has been renamed to “blas-reference”. In
addition, “lapack-reference” is also included, corresponding to
“liblapack” from Netlib.org.
Currently, there are 3 providers of the BLAS and LAPACK interfaces:
- lapack-reference: the BLAS/LAPACK implementation maintained by netlib.org
- OpenBLAS: an optimized version of BLAS and LAPACK
- MKL: Intel’s unfree but highly optimized BLAS/LAPACK implementation
By default, the above implementations all use the “LP64” BLAS and
LAPACK ABI. This corresponds to “openblasCompat” and is the safest way
to use BLAS/LAPACK. You may received some benefits from “ILP64” or
8-byte integer BLAS at the expense of breaking compatibility with some
packages.
This can be switched at build time with an override like:
import <nixpkgs> {
config.allowUnfree = true;
overlays = [(self: super: {
lapack = super.lapack.override {
lapackProvider = super.lapack-reference;
};
blas = super.blas.override {
blasProvider = super.lapack-reference;
};
})];
}
or, switched at runtime via LD_LIBRARY_PATH like:
$ LD_LIBRARY_PATH=$(nix-build -E '(with import <nixpkgs> {}).lapack.override { lapackProvider = pkgs.mkl; is64bit = true; })')/lib:$(nix-build -E '(with import <nixpkgs> {}).blas.override { blasProvider = pkgs.mkl; is64bit = true; })')/lib ./your-blas-linked-binary
By default, we use OpenBLAS LP64 also known in Nixpkgs as
openblasCompat.
[1]: https://wiki.debian.org/DebianScience/LinearAlgebraLibraries
[2]: https://wiki.gentoo.org/wiki/Blas-lapack-switch
hashed-mirrors are content addressed. So if $outputHash is in the
hashed-mirror, changes from ‘postFetch’ would already be made. So,
running postFetch will end up applying the change /again/, which we
don’t want.
I know, heretic, but...
I also know that this is not perfect but it is a good start, I think. It
would be nice if this were part of the automatic "nixdoc" function
reference. I'd like guidance if this should be part of the rust section
or something else.
"Application" is deprecated, "Other" is invalid, there are no generic
categories, and the Categories fields is optional per the spec.
Fixes the defaults after #75729.
Most of the skaware packages already build just fine with pkgsStatic,
however the wrapper scripts for execline and stdnotify-wrapper needed
the `-lskarlib` argument to go at the end.
`utmps` and `nsss` still fail with this error:
```
exec ./tools/install.sh -D -m 600 utmps-utmpd /bin/utmps-utmpd
/build/utmps-0.0.3.1/tools/install.sh: line 48: can't create /bin/utmps-utmpd.tmp.479: Permission denied
make: *** [Makefile:121: /bin/utmps-utmpd] Error 1
```
This reverts commit a50653295df5e2565b4a6a316923f9e939f1945b.
The reasons cited were “debugging”, in which case
you can just add the attribute to `buildSkawarePackage`
and “customizing”, which is still possible with
a normal `overrideDerivation`.
The patch removed `outputs` for some reason
(possible oversight), so building nsss failed.
Plus lots of complexity (e.g. don’t forget to add new
arguments to `removeAttrs` otherwise there’s a bug now).
As it turns out Darwin does most of the things differently then "normal"
systems. They are using a different shared library extension and require
an obscure commandline parameter that has to be added to every build
system out there. That issue seems to be with clang on Darwin as on
Linux that flag isn't required to build the very same tests (when using
clang).
After adjusting these two details the tests are running fine on the
darwin box that I was able to obtain.
- Add packages installed in a sub-directory of site-lisp, such as
mu4e, to EMACSLOADPATH.
- Add ELPA packages to EMACSLOADPATH.
- Add each package only once to EMACSLOADPATH. Before, each package
would typically be added twice for each transitive dependency
leading to a huge variable for a package having many dependencies.
Fixed#78680
According to the Cargo documentation:
> The build script does not have access to the dependencies listed in
> the dependencies or dev-dependencies section (they’re not built
> yet!). Also, build dependencies are not available to the package
> itself unless also explicitly added in the [dependencies] table.
https://doc.rust-lang.org/cargo/reference/build-scripts.html
This change separates linkage of regular dependencies and build
dependencies.
Regression introduced in PR #81191 80729b6787d. The file does not exist
somewhere during bootstrap of pkgsStatic.busybox which is used in nix
(by default).
I tested the builds.
* Make errors include the crate name and make them much more prominent.
* Move more code into lib.sh
* Already source generated logging code and lib.sh in configure
The inlined readme that we were iterating on has been moved to GitHub
issue #79975, and the default is now the new cargo fetcher, so this
doc comment is out of date.
All bazel fixed output derivations should be specific to the bazel
version that was used to generate them. There is not guarantee that the
build will still succeed or reproduces (without the cached fixed output)
if the fetch phase wasn't rerun with a different bazel version.
In the past bazel had been bumped but not all those packages that have
fixed outputs from bazel builds. This lead to compiling and somewhat
working TF versions that couldn't be reproduced without the cached fixed
outputs.
Nix now returns base64-encoded SRI hashes on hash mismatch. Usually,
people copy the returned hashes in TOFU fashion but since base64-encoded
strings can contain slashes, they often broke our use of them for temporary file name.
Escaping them should prevent the failures.
Previously, we would asssert that the lockfiles are consistent during the
unpackPhase, but if the pkg has a patch for the lockfile itself then we must
wait until the patchPhase is complete to check.
This also removes an implicity dependency on the src attribute coming from
`fetchzip` / `fetchFromGitHub`, which happens to name the source directory
"source". Now we glob for it, so different fetchers will work consistently.
This is useful when buildLayeredImage is called in a generic way
that should allow simple (base) images to be built, which may not
reference any store paths.
If we just want to write a non-compiled script (e.g. writeDash), it’s
usually a lot faster just doing it locally. That’s what
`runCommandLocal` was introduced for, so let’s use it in `writers`.
When the `paths` argument is too big `symlinkJoin` will fail with:
```
while setting up the build environment: executing '/nix/store/rm1hz1lybxangc8sdl7xvzs5dcvigvf7-bash-4.4-p23/bin/bash': Argument list too long
```
This is fixed by passing `paths` as a file instead of as an
environment variable.
`git repack` and `git gc` sometimes print “Nothing new to pack.”
to stdout, which breaks redirecting output to JSON file.
Let’s move the stdout of all git calls where it is not used to stderr
so that we still receive the info but it does not pollute our output.
Fixes#78744
My previous change broke when there are more packages than the maximum
number of layers. I had assumed that the `store-path-to-layer.sh` was
only ever passed a single store path, but that is not the case if
there are multiple packages going into the final layer. To fix this, we
loop through the paths going into the final layer, appending them to the
tar file and making sure they end up at the right path.
Changes the default fetcher in the Rust Platform to be the newer
`fetchCargoTarball`, and changes every application using the current default to
instead opt out.
This commit does not change any hashes or cause any rebuilds. Once integrated,
we will start deleting the opt-outs and recomputing hashes.
See #79975 for details.
The readme was nice to discuss in the implementation PR, but now that this is
merged it's better to have an issue that can be linked against in PRs and
doesn't require further merges to update status.
Ported with a status update in #79975
By overriding each dependency on every level of the dependency tree we
are creating a lot of unnecessary instances of the same derivation
Looking at the output size of `nix-instantiate --trace-function-calls
-vvvv …` and the execution time I got about a 10x improvement after
applying this change.
It was probably good intentions that lead to these overrides but in
practice no tooling (that I know of) really needs this. `carnix` and
`crate2nix` are fine without those overrides. Furthermore I believe that
it is the job of the tooling around `buildRustCrate` to provide a
coherent set of overrides. By not enforcing all of the overrides, debug
flags, verbosity, … to be the same throughout the closure we also allow
consumers to override specific aspects of the crates. Some (older?)
crates might need different `crateOverrides` then newer crates with the
same name. Currently such situations can not (easily) be implemented
with the override in-place.
This has several advantages:
1. It takes up less space on disk in-between builds in the nix store.
2. It uses less space in the binary cache for vendor derivation packages.
3. It uses less network traffic downloading from the binary cache.
4. It plays nicely with hashed mirrors like tarballs.nixos.org, which only
substitute --flat hashes on single files (not recursive directory hashes).
5. It's consistent with how simple `fetchurl` src derivations work.
6. It provides a stronger abstraction between input src-package and output
package, e.g., it's harder to accidentally depend on the src derivation at
runtime by referencing something like `${src}/etc/index.html`. Likewise, in
the store it's harder to get confused with something that is just there as a
build-time dependency vs. a runtime dependency, since the build-time
src dependencies are tarred up.
Disadvantages are:
1. It takes slightly longer to untar at the start of a build.
As currently implemented, this attaches the compacted vendor.tar.gz feature as a
rider on `verifyCargoDeps`, since both of them are relatively newly implemented
behavior that change the `cargoSha256`.
If this PR is accepted, I will push forward the remaining rust packages with a
series of treewide PRs to update the `cargoSha256`s.
Since a layer is reserved for "customization", the image can not
contains less than 2 layers.
The user gets the following message at evaluation:
nix-instantiate nixos/tests/docker-tools.nix
trace: the maxLayers argument of dockerTools.buildLayeredImage function must be greather than 1 (current value: 1)
Building a docker image with darwin binaries just yields a confusing
error when ran:
standard_init_linux.go:211: exec user process caused "exec format error"
This change prevents people from building such images in the first place
Previously I did use `runCommand` to do the same. Using
releaseTools.aggregate seems a lot saner and we might get nicer hydra
output of the tests that are failing.
It used to be the case (ref missing) that cargo did treat
`src/$libName.rs` as an alternative to `src/lib.rs` when the latter
wasn't present. Recently I failed to reproduce that with vanilla cargo
and it started to cause pain with some crates of the form:
some_crate/
`- src
`- main.rs
`- some_crate.rs
We would build `src/some_crate.rs` and thing it is a library while that
might not be the actual case. This crate is a valid `bin` crate not a
`lib` crate as far as I can tell from the samples I took.
I removed support for the previously required heuristic and commented
out the test cases in case we will need them again. We could crawl in
the Git history but chances are that the next person looking into this
doesn't know about the history.
Naive concatenation of $LD_LIBRARY_PATH can result in an empty
colon-delimited segment; this tells glibc to load libraries from the
current directory, which is definitely wrong, and may be a security
vulnerability if the current directory is untrusted. (See #67234, for
example.) Fix this throughout the tree.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
While looking at the graph of all the outputs in my personal binary
cache it became obvious that we have a lot of self references within the
package set. That isn't an isuse by itself. However it increases the
size of the binary cache for every (reproducible) build of a package
that carries references to itself. You can no longer deduplicate the
outputs since they are all unique. One of the ways to get rid of (a few)
references is to rewrite all the symlinks that are currently used to be
relative symlinks. Two build of something that didn't really change but
carries a self-reference can the be store as the same NAR file again.
I quickly hacked together this change to see if that would yield and
success. My bash scripting skills are probably not great but so far it
seem to somewhat work.
When this fails, the user may want to copy-paste the path to the "bad"
Cargo.lock file to inspect. The trailing `.` on `$cargoDeps.` gets caught in
most terminal copy-pastes. Since half the lines already don't have it, this
removes it from all of them for consistent output.
This helps us instruct rustc to build tests instead of binaries. The
actual build will then ONLY produce test executables. This is a first
step towards having rust crate tests within nixpkgs.
We default back to only a single output in test cases since that is the
only reasonable thing to do here.
Producing libraries or binaries in addition to tests would theoretically
be feasible but usually generates different dependency trees. It is very
common to have some libraries in `[dev-depdendencies]` within Cargo.toml
just for your tests. To not start mixing things up going with a
dedicated derivation for the test build sounds like the best choice for
now.
To use this you must provide a proper test dependency chain to
`buildRustCrate` (as you would usually do with your non-test inputs).
And then set the `buildTests` attribute to `true`. The derivation will
then contain all tests that were built in `$out/tests`. All common test
patterns and directories should be supported and tested by this change.
Below is an example how you would run a single test from the derivation.
This commit contains some more examples in the `buildRustCrateTests`
attribute set that might be helpful.
```
let
drv = buildRustCrate {
…
buildTests true;
};
in runCommand "test-my-crate" {} ''
touch $out
exec ${drv}/tests/my-test
''
```
While unifying most of the lib function calls I accidentially changed
the filterSource functions as well. Since there were no tests I ended
up forgetting about this case (even thought I ran into it…).
when tar'ing store paths into layered archives when building layered
images, don't use the absolute nix store path so that tar won't complain
if something new is added to the nix store
when building the final docker image, ignore any file changes tar
detects in the layers. they are all immutable and the only thing that
might change is the number of hard links due to store optimization
Most stdenv wrappers already work like this -- it allows greater
customisation. We just have to be careful to remove arguments we're
using that shouldn't be passed to stdenv. I've been conservative
here, because fetchcargo checksums shouldn't change lightly.
Before, every docker image had three extra layers:
1. A `closure` layer which is an internal implementation detail of
calculating the closure of the container
2. a `name-config.json` layer which is the images' run-time
configuration, and has no business being *in* the image as a layer.
3. a "bulk-layers" layer which is again and implementation detail
around collecting the image's closure.
None of these layers need to be in the final product.
This allows things like hooks other than postInstall to be passed
through to mkDerivation, which is very useful when customising or
debugging a package.
This reduces the size of Hello World [1] from 3.06 MiB to 678 KiB.
[1] As measured by nix-shell -p 'writers.writeHaskellBin "hello" {} "main = putStrLn \"hello\""' --run 'ls -l `which hello`'
The previous lines were only different in the kind of dependencies but
otherwise exactly the same. It makes the entire thing a bit more
readable by moving this into a function that takes care of this.
We can get rid of a bunch of workarounds that were in the build script
before by just passing on the `crateBin` attribute.
Before we converted the list of attributes to a string only to convert
it back in bash during the build phase. We can do the entire looping
through builds in Nix and thus need no conversion and parsing of
attributes over and over again.
The big part that still remains bash is the heuristic that cargo
introduced and that we can't do at eval time.
