Commit Graph

51 Commits

Author SHA1 Message Date
Vladimír Čunát
05a36304ea nixos ati_unfree: auto-switch xorg to fglrxComat 2016-05-23 10:12:44 +02:00
Eric Litak
4c415e59a4 rtl8723bs-firmware: init, split off from rtl8723bs 2016-04-25 00:41:25 -07:00
Graham Christensen
788122c3c5 facetimehd: Only unload module if it is loaded
The pre-sleep service exits if any command fails. Unloading facetimehd
without it being loaded blocks subsequent commands from running.

Note: `modprobe -r` works a bit better when unloading unused modules,
and is preferrable to `rmmod`. However, the facetimehd module does not
support suspending. In this case, it seems preferable to forcefully
unload the module. `modprobe` does not support a `--force` flag when
removing, so we are left with `rmmod`.

See:
 - https://github.com/NixOS/nixpkgs/pull/14883
 - https://github.com/patjak/bcwc_pcie/wiki#known-issues
2016-04-23 09:37:01 -05:00
Tuomas Tynkkynen
01854a850a treewide: Replace module_init_tools -> kmod
The former is deprecated and doesn't handle compressed kernel modules,
so all current usages of it are broken.
2016-04-22 10:40:57 +03:00
Brian McKenna
e50bee65f0 opengl.extraPackages32: pkgsi686Linux in example
Issue #12616 uses this example but the commit doesn't.
2016-03-26 00:50:56 +11:00
Vladimír Čunát
8291ea61b0 nvidia: allow using the beta driver, mainly in future 2016-03-07 23:33:17 +01:00
Vladimír Čunát
e9520e81b3 Merge branch 'master' into staging 2016-02-17 10:06:31 +01:00
lukasepple
0b72e7e247 intel2200BGFirmware: init at 3.1
This commit adds the firmware for the Intel 2200BG wireless cards for
the ipw2200 kernel module. Also it changes the
networking.enableIntel2200BGFirmware option to set it as
hardware.firmware since firmware-linux-nonfree does not contain the
appropiate firmware anymore. Also hardware.enableAllFirmware does enable
the intel2200BGFirmware now.
2016-02-15 19:53:07 +01:00
Kranium Gikos Mendoza
46ecb25d68 facetimehd: blacklist bdc_pci when enabled 2016-02-04 11:31:28 +08:00
Kranium Gikos Mendoza
9213916ca7 facetimehd: init at git-20160127 2016-01-28 02:59:36 +08:00
Nikolay Amiantov
b52acfdf01 nixos xserver: remove vaapiDrivers
Use hardware.opengl.extraPackages instead.
2016-01-26 13:42:40 +03:00
Nikolay Amiantov
1ae1791e8e nixos opengl: add extraPackages and extraPackages32 2016-01-26 13:42:39 +03:00
Tobias Geerinckx-Rice
228774aaf5 wis_go7007: remove dead package & module
Broken since 2014, but basically a package from 2008 with no
upstream.
2016-01-11 00:16:01 +01:00
Nikolay Amiantov
cf3202acac nixos/bumblebee: update for new packages 2015-12-05 00:54:09 +03:00
Eelco Dolstra
9c61317002 Put all firmware in $out/lib/firmware
This way, hardware.firmware can be a list of packages.
2015-08-25 00:40:34 +02:00
Nikolay Amiantov
a8788c4d6a bumblebee: remove redundant bash process 2015-08-03 23:26:23 +03:00
Eelco Dolstra
c63bc92d4c types.uniq types.str -> types.str 2015-06-15 18:12:32 +02:00
William A. Kennington III
6ffd44c4c3 nvidia: 346.47 -> 346.59 2015-04-07 13:24:55 -07:00
William A. Kennington III
c0cb4e1ef7 nixos/nvidia: Add a temporary hack to support kernel 4.0 2015-04-03 21:53:34 -07:00
aszlig
224ed7e798
nixos/hardware: Add option to enable KSM.
This is essentially what's been done for the official NixOS build slaves
and I'm using it as well for a few of my machines and my own Hydra
slaves.

Here's the same implementation from the Delft server configurations:

f47c2fc7f8/delft/common.nix (L91-L101)

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2015-04-01 20:00:27 +02:00
William A. Kennington III
86666893f0 nixos/microcode-amd: Update to early initrd loader 2015-03-25 14:44:36 -07:00
William A. Kennington III
b4fedf5315 nixos/intel-microcode: Support early initrd ucode loading 2015-03-25 14:14:46 -07:00
Eelco Dolstra
a4e0278fcd Create /dev/nvidia-uvm for CUDA support 2015-03-03 20:24:14 +01:00
Vladimír Čunát
a3a467ce77 nixos/nvidia: use correct 32-bit legacy libs; refactor
Fixes #6127.
Now we avoid multiple switches among the version possibilities.
2015-02-21 16:34:24 +01:00
William A. Kennington III
69a277e2cc iwlegacy: Remove since it is already in linux-firmware-nonfree 2015-02-13 14:27:47 -08:00
William A. Kennington III
650b2258f0 nonfree-firmware: Use the new kernel.org repository for tracking nonfree firmware changes
remove the obsolete iwlwifi firmware which is included in the repo.
2015-02-09 16:28:40 -08:00
Sebastián Bernardo Galkin
24abe2b2b3 Bumblebee config to enable multiple monitors
Added configurations to `bumblebee` package to easy multiple monitors on Optimus
machines.

The behaviour of the default `bumblebee` package hasn't change, so this change
is backwards compatible. Users who want to connect a monitor to their discrete
card should use the package `bumblebee_display` instead.

Also added new configuration option to nixos bumblebee module:

```
hardware.bumblebee.connectDisplay = true
```

will enable the new configuration, but the default is still false.
2014-12-30 19:17:42 -08:00
Eelco Dolstra
d34c600414 Remove udev from /run/opengl-drivers
/run/opengl-drivers should contain only libGL-related libraries, not
stuff like udev. Injecting anything into LD_LIBRARY_PATH is dangerous
because it can break applications that expect a different version of
the library.

Caused by eef9a8ac2a30b495ff7184382ed0dbd73b3b88e4. Fixes #5371.
2014-12-17 17:00:10 +01:00
Thomas Tuegel
f7c27885d0 Add iwlegacy firmware for old Intel wireless cards 2014-12-03 10:10:00 -06:00
William A. Kennington III
1716c12b54 iwlwifi: Split into separate package with more up to date firmware 2014-12-01 16:25:20 -08:00
Corey O'Connor
b2f3e10a35 Add primus and extend bumblebee to support 32bit/64bit multilib architectures.
Using primusrun will work as expected in a multilib environment. Even if the initial program
executes a antoehr program of the another architecture. Assuming the program does not modify
LD_LIBRARY_PATH inappropriately.

This does not update virtualgl for seemless multilib. I was unable to get a mixed 64/32 bit
environment to work with VirtualGL. The mechanism VirtualGL uses to inject the fake GL library would
fail if both 32bit and 64 bit libraries were in the environment. Instead the bumblebee package
creates a optirun32 executable that can be used to run a 32bit executable with optimus on a 64 bit
host. This is not created if the host is 32bit.

For my usage, gaming under wine, the primusrun executable works as expected regardless of
32bit/64bit.
2014-11-29 16:42:00 -08:00
Vladimír Čunát
d39c6ceffc nvidia_x11: current long-lived becomes a new legacy
CC: #5070.
2014-11-24 22:39:00 +01:00
Nathaniel Baxter
fb9a6221b6 ati_unfree: Update nixos-manual for AMD driver support 2014-09-07 12:42:32 +10:00
Nathaniel Baxter
45f4b8b3ad ati_unfree: Towards using ati unfree 32bit binary libs 2014-09-07 12:40:40 +10:00
Nathaniel Baxter
c16874c4c0 ati_unfree: Create a nixos module for the ati_unfree x11 driver and
blacklist the radeon driver when ati_unfree is installed.
2014-09-07 12:40:32 +10:00
Shea Levy
b3cfb9084b Get all lib functions from lib, not pkgs.lib, in modules 2014-07-02 12:28:18 -04:00
Vladimír Čunát
1200a1ecf3 fixup the previous: got renamed to sessionVariables
I'm sorry; I didn't notice Eelco renamed the option.
My dry-run didn't catch that one with nvidia driver, no idea why.
2014-06-15 20:28:30 +02:00
Vladimír Čunát
de783277da nixos/opengl: add LD_LIBRARY_PATH to systemVariables instead
so all users get this variable, thanks to work from #2692.
2014-06-15 19:18:16 +02:00
Athan Clark
5fc3df831c Simple typo 2014-05-13 10:35:57 -06:00
Michael Raskin
eef9a8ac2a On my system OpenGL with bumblebee seems to require libudev in LD_LIBRARY_PATH. Fix that, fix bumblebee module loading and make the socket group configurable 2014-05-02 14:32:47 +04:00
Eelco Dolstra
02cef04c81 Move the NVIDIA support into its own module
Previously all card-specific stuff was scattered across xserver.nix
and opengl.nix, which is ugly. Now it can be kept together in a single
card-specific module. This required the addition of a few internal
options:

- services.xserver.drivers: A list of { name, driverName, modules,
  libPath } sets.

- hardware.opengl.package: The OpenGL implementation. Note that there
  can be only one OpenGL implementation at a time in a system
  configuration (i.e. no dynamic detection).

- hardware.opengl.package32: The 32-bit OpenGL implementation.
2014-04-29 14:42:36 +02:00
Eelco Dolstra
3fe96bcca1 Rename hardware.opengl.videoDrivers back to services.xserver.videoDrivers
Fixes #2379.
The new name was a misnomer because the values really are X11 video
drivers (e.g. ‘cirrus’ or ‘nvidia’), not OpenGL implementations. That
it's also used to set an OpenGL implementation for kmscon is just
confusing overloading.
2014-04-29 14:42:36 +02:00
Vladimír Čunát
8340454544 mesa: have all output on /run/opengl-driver{,-32}
Fixes #2242 in a different way (cleaner, I hope).
2014-04-14 21:38:23 +02:00
Vladimír Čunát
557dff54aa nixos opengl: add s2tc to mesa drivers by default
Close #2200. Thanks to @cpages for suggesting and testing this.
2014-04-14 21:38:23 +02:00
Eelco Dolstra
29027fd1e1 Rewrite ‘with pkgs.lib’ -> ‘with lib’
Using pkgs.lib on the spine of module evaluation is problematic
because the pkgs argument depends on the result of module
evaluation. To prevent an infinite recursion, pkgs and some of the
modules are evaluated twice, which is inefficient. Using ‘with lib’
prevents this problem.
2014-04-14 16:26:48 +02:00
Tomasz Kontusz
fe38031168 Upgrade bumblebee and add nixos module
* Bump bumblebee to 3.2.1
 * Remove config.patch - options it added can be passed to ./configure now
 * Remove the provided xorg.conf
   Provided xorg.conf was causing problems for some users,
   and Bumblebee provides its own default configuration anyway.
 * Make secondary X11 log to /var/log/X.bumblebee.log
 * Add a module for bumblebee
2014-02-09 15:09:41 +01:00
Shea Levy
dea562b6b9 services.mesa -> hardware.opengl
Signed-off-by: Shea Levy <shea@shealevy.com>
2014-02-08 14:45:37 -05:00
Eelco Dolstra
785eaf2cea Add some primops to lib 2013-11-12 13:48:30 +01:00
Eelco Dolstra
408b8b5725 Add lots of missing option types 2013-10-30 18:47:43 +01:00
Eelco Dolstra
d5047faede Remove uses of the "merge" option attribute
It's redundant because you can (and should) specify an option type, or
an apply function.
2013-10-28 22:45:56 +01:00