* networking/stubby.nix: implementing systemd service module for stubby
This change implements stubby, the DNS-over-TLS stub resolver daemon.
The motivation for this change was the desire to use stubby's
DNS-over-TLS funcitonality in tandem with unbound, which requires
passing certain configuration parameters. This module implements those
config parameters by exposing them for use in configuration.nix.
* networking/stubby.nix: merging back module list
re-merging the module list to remove unecessary changes.
* networking/stubby.nix: removing unecessary capabilities flag
This change removes the unecessary flag for toggling the capabilities
which allows the daemon to bind to low ports.
* networking/stubby.nix: adding debug level logging bool
Adding the option to turn on debug logging.
* networking/stubby.nix: clarifying idleTimeout and adding systemd target
Improving docs to note that idleTimeout is expressed in ms. Adding the
nss-lookup `before' target to the systemd service definition.
* networking/stubby.nix: Restrict options with types.enum
This change restricts fallbackProtocol and authenticationMode to accept
only valid options instead of any list or str types (respectively). This
change also fixes typo in the CapabilityBoundingSet systemd setting.
* networking/stubby.nix: cleaning up documentation
Cleaning up docs, adding literal tags to settings, and removing
whitespace.
* networking/stubby.nix: fixing missing linebreak in comments
* networking/stubby.nix: cleaning errant comments
When doing source routing/multihoming, it's practical to give names to routing
tables. The absence of the rt_table file in /etc make this impossible.
This patch recreates these files on rebuild so that they can be modified
by the user see NixOS#38638.
iproute2 is modified to look into config.networking.iproute2.confDir instead of
/etc/iproute2.
Allow out of band communication between qemu VMs and the host.
Useful to retrieve IPs of VMs from the host (for instance when libvirt can't analyze
DHCP requests because VMs are configured with static addresses or when
there is connectivity default).
This patch is heavily inspired by bd0d8ed807d29faa3deee96bafcbbd76c8fa4060 which added
a setcap wrapper for `mtr` in order to allow running `mtr` without
`sudo`. The need for the capability `cap_net_raw` that can be registered using
`setcap` has been documented in the Arch Wiki: https://wiki.archlinux.org/index.php/Capabilities#iftop
A simple testcase has been added which starts two machines, one with a
setcap wrapper for `iftop`, one without. Both testcases monitor the
bandwidth usage of the machine using the options `-t -s 1` once, the
machine with setcap wrapper is expected to succeed, the `iftop` on the
machine without setcap wrapper is expected to return a non-zero exit
code.
- prometheus exporters are now configured with
`services.prometheus.exporters.<name>`
- the exporters are now defined by attribute sets
from which the options for each exporter are generated
- most of the exporter definitions are used unchanged,
except for some changes that should't have any impact
on the functionality.
By default, OnlyKey device (https://crp.to/p/) won't work on Linux (and,
therefore, NixOS). This is unintuitive and requires one to search for a
solution in the documentation.
This change allows one to enable OnlyKey device support directly from
their NixOS configuration.
All 5 daemon types can be enabled and configured through the module and the module both creates the ceph.conf required but also creates and enables specific services for each daemon, based on the systemd service files that upstream provides.
The strongswan-swanctl systemd service starts charon-systemd. This implements a IKE daemon
very similar to charon, but it's specifically designed for use with systemd. It uses the
systemd libraries for a native integration.
Instead of using starter and an ipsec.conf based configuration, the daemon is directly
managed by systemd and configured with the swanctl configuration backend.
See: https://wiki.strongswan.org/projects/strongswan/wiki/Charon-systemd
Note that the strongswan.conf and swantctl.conf configuration files are automatically
generated based on NixOS options under services.strongswan-swanctl.strongswan and
services.strongswan-swanctl.swanctl respectively.
* digitalbitbox: init at 2.2.2
The commits that lead to this have been squashed from independent
commits see branch @vidbina/add/digitalbitbox-wip that did the
following:
- 0a3030fa0ec digitalbitbox: init at 2.2.2
- c18ffa3ffd4 digitalbitbox: moved meta to EOF
- 0c5f3d6972a digitalbitbox: using preConfigure + configureFlags
- a85b1dfc3fd digitalbitbox: nativeBuildInputs
- 90bdd35ef0f digitalbitbox: autoreconfHook
- 91810eea055 digitalbitbox: default installPhase & makeWrapper
- 90e43fb7e2a digitalbitbox: doc rm $PWD hack & printf-tee deal
- fd033b2fe5a digitalbitbox: cleanup, alphabetically sort attrs
- c5907982db3 digitalbitbox: added hardware module
- 88e46bc9ae0 digitalbitbox: added program module
- amend to change name: dbb-app -> digitalbitbox
- amend to add install instructions based on feedback
(https://github.com/NixOS/nixpkgs/pull/33787#issuecomment-362813149)
- amend to add longDescription
- moved program to its own dir
- overridable udev rules handling
- added docs to manual
- added package attr to program module
- added package attr to hardware module
* digitalbitbox: use libsForQt5.callPackage
This was only applicable to very specific hardware, and the only person
with an apparent interest in maintaining it (me) no longer uses the
hardware in question.
To make the configuration of `yabar` more pleasant and easier to
validate, a NixOS module will be quite helpful.
An example config could look like this:
```
{
programs.yabar = {
enable = true;
bars.top.indicators.exec = "YA_DATE";
};
}
```
The module adds a user-controlled systemd service which runs `yabar` after
starting up X.
* bemenu: init at 2017-02-14
* velox: 2015-11-03 -> 2017-07-04
* orbment, velox: don't expose subprojects
the development of orbment and velox got stuck
their subprojects (bemenu, dmenu-wayland, st-wayland) don't work correctly outside of parent projects
so hide them to not confuse people
swc and wld libraries are unpopular and unlike wlc are not used by anything except velox
* pythonPackages.pydbus: init at 0.6.0
* way-cooler: 0.5.2 -> 0.6.2
* nixos/way-cooler: add module
* dconf module: use for wayland
non-invasive approach for #31293
see discussion at #32210
* sway: embed LD_LIBRARY_PATH for #32755
* way-cooler: switch from buildRustPackage to buildRustCrate #31150
* Add options:
- enable
- davUser (default: "davfs2")
- davGroup (default: "davfs2)
* Add davfs2 user or group if they are not specified in the
configuration
* nghttpx: Add a new NixOS module for the nghttpx proxy server
This change also adds a global `uid` and `gid` for a `nghttpx` user
and group as well as an integration test.
* nixos/nghttpx: fix building manual
postage is no longer maintained and has been replaced by the identical pgmanage. See:
https://github.com/workflowproducts/postage#postage-has-been-replaced-with-pgmanage
The following error is raised when a user enables the deprecated `services.postage.enable` option:
Failed assertions:
- services.postage is deprecated in favor of pgmanage. They have the same options so just substitute postage for pgmanage.
Currently, ecryptfs support is coupled to `security.pam.enableEcryptfs`, but one
might want to use ecryptfs without enabling the PAM functionality. This commit
splits it out into a `boot.supportedFilesystems` switch.
This reverts commit 7c3253e519a572f90a907fc56bb6407da004b24c.
I included this in another push by accident and never intended for it to
be in mainline. See https://github.com/NixOS/nixpkgs/pull/26075 if you
want more.
All available options were just enabling
hardware.enableRedistributableFirmware. There were nix files without
modules which weren't referenced anywhere.
This has been broken nearly all the time due to the patches needed to
iproute2 not being compatible with the newer versions we have been
shipping. As long as Ubuntu does not manage to upstream these changes
so they are maintained with iproute2 and we don't have a maintainer
updating these patches to new iproute2 versions it is not feasible to
have this available.
* prometheus-collectd-exporter service: init module
Supports JSON and binary (optional) protocol
of collectd.
* nixos/prometheus-collectd-exporter: submodule is not needed for collectdBinary
This file was removed in 6f0b538044, but sufficient care was not taken
to remove all references to it. Without this change, trying to
rebuild nixos fails.
The latest release of libyamlcpp in nixpkgs does not build because it
uses an older version of boost than the one in nixpkgs and therefore
expects a particular header file which does not exist in the latest
boost anymore. For this reason, a later (git) version of libyamlcpp is
used here (which actually doesn't even require boost).
The substituteInPlace in the prePatch phase is needed because libevdev
places its headers in non-standard places, meaning Nix cannot normally
find them. The `cut` command removes the first two "-I" characters from
the output of `pkg-config`. This needs to be in the prePatch phase
because otherwise Nix will patch these lines to `/var/empty`, meaning
you would have less specific replacement (in case other lines are also
patched to `/var/empty`).
I wrote the patch. (I believe it is NixOS specific.)
* nixos/usbguard: create package and module
No usbguard module or package existed for NixOS previously. USBGuard
will protect you from BadUSB attacks. (assuming configuration is done
correctly)
* nixos/usbguard: remove extra packages
Users can override this by themselves.
* nixos/usbguard: add maintainer and fix style
* modules sks and pgpkeyserver-lite:
runs the sks keyserver with optional nginx proxy for webgui.
* Add calbrecht to maintainers
* module sks: fix default hkpAddress value
* module pgpkeyserver-lite: make hkpAddress a string type option
and use (builtins.head services.sks.hkpAddress) as default value
* module sks: remove leftover service dependencies
#11864 Support Linux audit subsystem
Add the auditd.service as NixOS module to be able to
generate profiles from /var/log/audit/audit.log
with apparmor-utils.
auditd needs the folder /var/log/audit to be present on start
so this is generated in ExecPreStart.
auditd starts with -s nochange so that effective audit processing
is managed by the audit.service.
to /etc/dd-agent/conf.d by default, and make sure
/etc/dd-agent/conf.d is used.
Before NixOS 17.03, we were using dd-agent 5.5.X which
used configuration from /etc/dd-agent/conf.d
In NixOS 17.03 the default conf.d location is first used relative,
meaning that $out/agent/conf.d was used without NixOS overrides.
This change implements similar functionality as PR #25288, without
breaking backwards compatibility.
(cherry picked from commit 77c85b0ecbc1070d7adff31b339bede92e4193fa)
Adds an option `security.lockKernelModules` that, when enabled, disables
kernel module loading once the system reaches its normal operating state.
The rationale for this over simply setting the sysctl knob is to allow
some legitmate kernel module loading to occur; the naive solution breaks
too much to be useful.
The benefit to the user is to help ensure the integrity of the kernel
runtime: only code loaded as part of normal system initialization will be
available in the kernel for the duration of the boot session. This helps
prevent injection of malicious code or unexpected loading of legitimate
but normally unused modules that have exploitable bugs (e.g., DCCP use
after free CVE-2017-6074, n_hldc CVE-2017-2636, XFRM framework
CVE-2017-7184, L2TPv3 CVE-2016-10200).
From an aestethic point of view, enabling this option helps make the
configuration more "declarative".
Closes https://github.com/NixOS/nixpkgs/pull/24681
* programs.zsh: factor zsh-syntax-highlighting out into its own module
* programs.zsh.syntax-highlighting: add `highlighters` option
* programs.zsh: document BC break introduced by moving zsh-syntax-completion into its own module
* programs.zsh: add enableOhMyZsh option to automate setup of oh-my-zsh in global zshrc
* programs.zsh: make oh-my-zsh plugins configurable
* programs.zsh: add ohMyZshCustom option
* programs.zsh: add ohMyZshTheme option
* programs.zsh: applying minor fixes to evaluate expressions properly
* programs.zsh: fix ordering of oh-my-zsh config and execution
* programs.zsh: move all oh-my-zsh params into its own scope named programs.zsh.oh-my-zsh
