A disabled systemd service with a "startAt" attribute, like this:
systemd.services.foo-service = {
enable = false;
startAt = "*-*-* 05:15:00";
...
};
will cause the following errors in the system journal:
systemd[1]: foo-service.timer: Refusing to start, unit to trigger not loaded.
systemd[1]: Failed to start foo-service.timer.
Fix it by not generating the corresponding timer unit when the service
is disabled.
Previously, the value from stdenv.platform.kernelDTB was used. That
doesn't work well if both kinds (DTB and non-DTB) of generations exist
in the system profile.
':' is currently used as separator in /boot/grub/state for the list of
devices GRUB should be installed to. The problem is that ':' itself may
appear in a device path:
/dev/disk/by-id/usb-SanDisk_Cruzer_20043512300546C0B317-0:0
With such a path, NixOS will install GRUB *every* time, because it
thinks the configuration differs from the state file (due to the wrong
list split). Fix it by using ',' as separator.
For existing systems with GRUB installed on multiple devices, this
change means that GRUB will be installed one extra time.
When displaying a warning about a removed Option we should always
include reasoning why it was removed and how to get the same
functionality without it.
Introduces such a description argument and patches occurences (mostly
with an empty string).
startGnuPGAgent: further notes on replacement
This allows setting options for the same LUKS device in different
modules. For example, the auto-generated hardware-configuration.nix
can contain
boot.initrd.luks.devices.crypted.device = "/dev/disk/...";
while configuration.nix can add
boot.initrd.luks.devices.crypted.allowDiscards = true;
Also updated the examples/docs to use /disk/disk/by-uuid instead of
/dev/sda, since we shouldn't promote the use of the latter.
Unfortunately, pkill doesn't distinguish between kernel and user space
processes, so we need to make sure we don't accidentally kill kernel
threads.
Normally, a kernel thread ignores all signals, but there are a few that
do. A quick grep on the kernel source tree (as of kernel 4.6.0) shows
the following source files which use allow_signal():
drivers/isdn/mISDN/l1oip_core.c
drivers/md/md.c
drivers/misc/mic/cosm/cosm_scif_server.c
drivers/misc/mic/cosm_client/cosm_scif_client.c
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
drivers/staging/rtl8188eu/core/rtw_cmd.c
drivers/staging/rtl8712/rtl8712_cmd.c
drivers/target/iscsi/iscsi_target.c
drivers/target/iscsi/iscsi_target_login.c
drivers/target/iscsi/iscsi_target_nego.c
drivers/usb/atm/usbatm.c
drivers/usb/gadget/function/f_mass_storage.c
fs/jffs2/background.c
fs/lockd/clntlock.c
fs/lockd/svc.c
fs/nfs/nfs4state.c
fs/nfsd/nfssvc.c
While not all of these are necessarily kthreads and some functionality
may still be unimpeded, it's still quite harmful and can cause
unexpected side-effects, especially because some of these kthreads are
storage-related (which we obviously don't want to kill during bootup).
During discussion at #15226, @dezgeg suggested the following
implementation:
for pid in $(pgrep -v -f '@'); do
if [ "$(cat /proc/$pid/cmdline)" != "" ]; then
kill -9 "$pid"
fi
done
This has a few downsides:
* User space processes which use an empty string in their command line
won't be killed.
* It results in errors during bootup because some shell-related
processes are already terminated (maybe it's pgrep itself, haven't
checked).
* The @ is searched within the full command line, not just at the
beginning of the string. Of course, we already had this until now, so
it's not a problem of his implementation.
I posted an alternative implementation which doesn't suffer from the
first point, but even that one wasn't sufficient:
for pid in $(pgrep -v -f '^@'); do
readlink "/proc/$pid/exe" &> /dev/null || continue
echo "$pid"
done | xargs kill -9
This one spawns a subshell, which would be included in the processes to
kill and actually kills itself during the process.
So what we have now is even checking whether the shell process itself is
in the list to kill and avoids killing it just to be sure.
Also, we don't spawn a subshell anymore and use /proc/$pid/exe to
distinguish between user space and kernel processes like in the comments
of the following StackOverflow answer:
http://stackoverflow.com/a/12231039
We don't need to take care of terminating processes, because what we
actually want IS to terminate the processes.
The only point where this (and any previous) approach falls short if we
have processes that act like fork bombs, because they might spawn
additional processes between the pgrep and the killing. We can only
address this with process/control groups and this still won't save us
because the root user can escape from that as well.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Fixes: #15226
Continuation of 79c3c16dcbb3b45c0f108550cb89ccd4fc855e3b. Systemd 229
sets the default RLIMIT_CORE to infinity, causing systems to be
littered with core dumps when systemd.coredump.enable is disabled.
This restores the 15.09 soft limit of 0 and hard limit of infinity.
This reverts commit 45c218f893d38f94cd62fc256117b9fb1a0d1749.
Busybox's modprobe causes numerous "Unknown symbol" errors in the
kernel log, even though the modules do appear to load correctly.
Systemd 229 sets kernel.core_pattern to "|/bin/false" by default,
unless systemd-coredump is enabled. Revert back to the default of
writing "core" in the current directory.
Also add required systemd services for starting/stopping mdmon.
Closes#13447.
abbradar: fixed `mdadmShutdown` service name according to de facto conventions.
Since we don't restart sysinit.service in switch-to-configuration, this
additionally overrides systemd-binfmt.service to depend on
proc-sys-fs-binfmt_misc.automount, which is normally provided by
sysinit.service.
This reverts commit cad8957eabcbf73062226d28366fd446c15c8737. It
breaks NixOps, but more importantly, such major changes to the module
system really need to be reviewed.
- Enforce that an option declaration has a "defaultText" if and only if the
type of the option derives from "package", "packageSet" or "nixpkgsConfig"
and if a "default" attribute is defined.
- Enforce that the value of the "example" attribute is wrapped with "literalExample"
if the type of the option derives from "package", "packageSet" or "nixpkgsConfig".
- Warn if a "defaultText" is defined in an option declaration if the type of
the option does not derive from "package", "packageSet" or "nixpkgsConfig".
- Warn if no "type" is defined in an option declaration.
This reverts commit b861bf8ddff67703, because according to @mdorman [1] this
change rendered his NixOS systems unbootable, and we probably don't want that.
[1] b861bf8ddf (commitcomment-16058598)
Allow usage of list of strings instead of a comma-separated string
for filesystem options. Deprecate the comma-separated string style
with a warning message; convert this to a hard error after 16.09.
15.09 was just released, so this provides a deprecation period during
the 16.03 release.
closes#10518
Signed-off-by: Robin Gloster <mail@glob.in>
Fixes references coming from the mdadm udev rules.
This addresses #12722 (mdadm udev rules have references to /usr/bin) but
still won't fix the warning, though (if we want to fix the warnings, we
will have to patch the udev rules generater in services/hardware/udev).
For common mdraid functionality, this shouldn't fix anything, because
the wrong references seem to only apply to containers, see these
(wrapped) lines from ${mdadm}/lib/udev/rules.d/63-md-raid-arrays.rules:
# Tell systemd to run mdmon for our container, if we need it.
ENV{MD_LEVEL}=="raid[1-9]*",
ENV{MD_CONTAINER}=="?*",
PROGRAM="/usr/bin/readlink $env{MD_CONTAINER}",
ENV{MD_MON_THIS}="%c"
ENV{MD_MON_THIS}=="?*",
PROGRAM="/usr/bin/basename $env{MD_MON_THIS}",
ENV{SYSTEMD_WANTS}+="mdmon@%c.service"
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Partially reverts commit 901163c0c707d36323400394bf6e75adc4621e2f.
This has broken remote SSH into initrd because ${cfg.shell} is not
expanded. Also, nsswitch is useless without libnss_files.so which
are installed by initrd-ssh.
Reverts part of a04a7272aa38ada45e694281071b720d4abbd0df
packageSet is slated to be introduced in #11866 but currently causes
evalation errors.
/cc @ts468
- add missing types in module definitions
- add missing 'defaultText' in module definitions
- wrap example with 'literalExample' where necessary in module definitions
Setting nixosVersion to something custom is useful for meaningful GRUB
menus and /nix/store paths, but actuallly changing it rebulids the
whole system path (because of `nixos-version` script and manual
pages). Also, changing it is not a particularly good idea because you
can then be differentitated from other NixOS users by a lot of
programs that read /etc/os-release.
This patch introduces an alternative option that does all you want
from nixosVersion, but rebuilds only the very top system level and
/etc while using your label in the names of system /nix/store paths,
GRUB and other boot loaders' menus, getty greetings and so on.
This hopefully fixes intermittent initrd failures where udevd cannot
create a Unix domain socket:
machine# running udev...
machine# error getting socket: Address family not supported by protocol
machine# error initializing udev control socket
machine# error getting socket: Address family not supported by protocol
The "unix" kernel module is supposed to be loaded automatically, and
clearly that works most of the time, but maybe there is a race
somewhere. In any case, no sane person would run a kernel without Unix
domain sockets, so we may as well make it builtin.
http://hydra.nixos.org/build/30001448
This hopefully fixes intermittent test failures like
http://hydra.nixos.org/build/29962437
router# [ 240.128835] INFO: task mke2fs:99 blocked for more than 120 seconds.
router# [ 240.130135] Not tainted 3.18.25 #1-NixOS
router# [ 240.131110] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
assuming that these are caused by high load on the host.
... because we make it built-in by default.
I can't imagine anyone who wanted to purge this module from his/her system,
so let's keep it simple, at least for now.
Previously this barfed with:
updating GRUB 2 menu...
fileparse(): need a valid pathname at /nix/store/zldbbngl0f8g5iv4rslygxwp0dbg1624-install-grub.pl line 391.
warning: error(s) occured while switching to the new configuration
The most complex problems were from dealing with switches reverted in
the meantime (gcc5, gmp6, ncurses6).
It's likely that darwin is (still) broken nontrivially.
mmc_block and sdhci_acpi are both necessary for a Bay Trail Chromebook with an
internal eMMC drive. The sdhci_acpi module is detectable but I can not figure
out a way to check whether the mmc_block module is needed by just looking at
/sys/
Option aliases/deprecations can now be declared in any NixOS module,
not just in nixos/modules/rename.nix. This is more modular (since it
allows for example grub-related aliases to be declared in the grub
module), and allows aliases outside of NixOS (e.g. in NixOps modules).
The syntax is a bit funky. Ideally we'd have something like:
options = {
foo.bar.newOption = mkOption { ... };
foo.bar.oldOption = mkAliasOption [ "foo" "bar" "newOption" ];
};
but that's not possible because options cannot define values in
*other* options - you need to have a "config" for that. So instead we
have functions that return a *module*: mkRemovedOptionModule,
mkRenamedOptionModule and mkAliasOptionModule. These can be used via
"imports", e.g.
imports = [
(mkAliasOptionModule [ "foo" "bar" "oldOption" ] [ "foo" "bar" "newOption" ]);
];
As an added bonus, deprecation warnings now show the file name of the
offending module.
Fixes#10385.
- systemd puts all into one output now (except for man),
because I wasn't able to fix all systemd/udev refernces
for NixOS to work well
- libudev is now by default *copied* into another path,
which is what most packages will use as build input :-)
- pkgs.udev = [ libudev.out libudev.dev ]; because there are too many
references that just put `udev` into build inputs (to rewrite them all),
also this made "${udev}/foo" fail at *evaluation* time
so it's easier to catch and change to something more specific
This way the binary gets stripped & rpath-shrinked etc. as usual.
We'd seem to get a runtime reference to gcc otherwise.
TODO: Maybe we should be able to set e.g. 'dontUnpack = true;'
to make this more pretty.
Adding the configuration option 'systemd.generators' to
specify systemd system-generators. The option allows to
either add new system-generators to systemd, or to over-
ride or disable the system-generators provided by systemd.
Internally, the configuration option 'systemd.generators'
maps onto the 'environment.etc' configuration option.
Having a convenience wrapper around 'environment.etc' helps
to group the systemd system-generator configuration more
easily with other 'systemd...' configurations.
$d should be $sd, this causes resume from hibernate to fail if
resumeDevice is not explicitly set in config. Introduced in commit:
'stage-1: Shut up warnings about swap devices that don't exist yet'
(cherry picked from commit 2a31397f536b3bf57e4ee76b812fd83ab31de971)
$d should be $sd, this causes resume from hibernate to fail if
resumeDevice is not explicitly set in config. Introduced in commit:
'stage-1: Shut up warnings about swap devices that don't exist yet'
When using extlinux-conf-builder in a nix build using chroots, the
following error message could be seen:
/nix/store/XXX-extlinux-conf-builder.sh: line 121: cd: /nix/var/nix/profiles: No such file or directory
To avoid this, just skip the code path parsing /nix/var/nix/profiles
when $numGenerations (passed from the command line) is 0 (which is the
only legal value of $numGenerations in a nix build context).
Without a menu title, U-Boot's distro scripts just autoboot the first
entry by default.
When I initially wrote this, my board wasn't apparently running stock
U-Boot but had some local hacks saved in the U-Boot's environment
which made it always display the prompt.
When calling addEntry inside a subshell, the filesCopied array would
be updated only in the subshell's environment. This would only cause an
issue if no -g flag was passed to the script, causing no kernels
to be copied.
This fixes a failing assert in systemd-timesyncd (issue #5913) as it
expects the directory /run/systemd/netif/links/ to exist, and nothing in
NixOS currently creates it.
Also we get a net reduction in our code as rules for /run/utmp and
/var/log/journal are also provided by the same upstream file.
(cherry picked from commit a278a9224a3c1c5db399d53c86b36a25133b5cda)
This shuts up this error from dbus:
May 11 13:52:16 machine dbus-daemon[259]: Unknown username "systemd-network" in message bus configuration file
May 11 13:52:16 machine dbus-daemon[259]: Unknown username "systemd-resolve" in message bus configuration file
which happens because the D-Bus config for networkd/resolved is
enabled unconditionally, and we don't have an easy way to turn it off.
(cherry picked from commit f19b58fb6a5cc55af6d8d8ca7979f8e64255d2d0)
Some filesystems like fat32 don't support symlinking and need to be
supported on /boot as an efi system partition. Instead of creating the symlink directly in boot, create the symlink in
a temporary directory which has to support symlinking.
This solves the problem that modprobe does not know about $MODULE_DIR
when run via sudo, and instead wrongly tries to read /lib/modules/:
$ sudo strace -efile modprobe foo |& grep modules
open("/lib/modules/3.14.37/modules.softdep", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.dep.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.dep.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.14.37/modules.alias.bin", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
Without this patch, one would have to use sudo -E (preserves environment
vars). But that option is reserved for sudo users with extra rights
(SETENV), so it's not a solution.
environment.sessionVariables are set by PAM, so they are included in the
environment used by sudo.
This fixes a failing assert in systemd-timesyncd (issue #5913) as it
expects the directory /run/systemd/netif/links/ to exist, and nothing in
NixOS currently creates it.
Also we get a net reduction in our code as rules for /run/utmp and
/var/log/journal are also provided by the same upstream file.
This module generates a /boot/extlinux/extlinux.conf bootloader
configuration file that is supported by e.g. U-Boot:
http://git.denx.de/?p=u-boot.git;a=blob;f=doc/README.distro;hb=refs/heads/master
With this, all ARM boards supported by U-Boot can be booted in a common
way (a single boot file generator, all boards booting via initrd like
x86) and with same boot menu functionality as GRUB has.
-- sample extlinux.conf file --
# Generated file, all changes will be lost on nixos-rebuild!
# Change this to e.g. nixos-42 to temporarily boot to an older configuration.
DEFAULT nixos-default
TIMEOUT 50
LABEL nixos-default
MENU LABEL NixOS - Default
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
LABEL nixos-71
MENU LABEL NixOS - Configuration 71 (2015-05-17 21:32 - 15.06.git.0b7a7a6M)
LINUX ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-zImage
INITRD ../nixos/0ss2zs8sb6d1qn4gblxpwlxkfjsgs5f0-initrd-initrd
FDTDIR ../nixos/n7vxfk60nb5h0mcbhkwwxhcz2q2nvxzv-linux-4.1.0-rc3-cpufreq-dtbs
APPEND systemConfig=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M init=/nix/store/469qvr43ln8bfsnk5lzcz6m6jfcgdd4r-nixos-15.06.git.0b7a7a6M/init loglevel=8 console=ttyS0,115200n8 drm.debug=0xf
With systemd 219, this is fine because systemd will cause the new
journald to re-use the file descriptors of the old one. So existing
connections to the journal are unaffected.
This shuts up this error from dbus:
May 11 13:52:16 machine dbus-daemon[259]: Unknown username "systemd-network" in message bus configuration file
May 11 13:52:16 machine dbus-daemon[259]: Unknown username "systemd-resolve" in message bus configuration file
which happens because the D-Bus config for networkd/resolved is
enabled unconditionally, and we don't have an easy way to turn it off.
It boots, but some things still don't work:
1) Installation of DTBs
2) Boot of initrd
Booting still needs a proper config.txt in /boot, which could probably be
managed by NixOS.
