nixpkgs/nixos/modules/installer/tools/nixos-generate-config.pl
Vladimír Čunát 0b68b92062 nixos i18n.consoleFont: choose a different default
Distros often choose Terminus as the default, and it supports some
non-ASCII characters that we use in config. Fixes #8107.
2015-06-09 20:13:42 +02:00

543 lines
15 KiB
Perl
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#! @perl@
use Cwd 'abs_path';
use File::Spec;
use File::Path;
use File::Basename;
use File::Slurp;
use File::stat;
sub uniq {
my %seen;
my @res = ();
foreach my $s (@_) {
if (!defined $seen{$s}) {
$seen{$s} = 1;
push @res, $s;
}
}
return @res;
}
sub runCommand {
my ($cmd) = @_;
open FILE, "$cmd 2>&1 |" or die "Failed to execute: $cmd\n";
my @ret = <FILE>;
close FILE;
return ($?, @ret);
}
# Process the command line.
my $outDir = "/etc/nixos";
my $rootDir = ""; # = /
my $force = 0;
my $noFilesystems = 0;
my $showHardwareConfig = 0;
for (my $n = 0; $n < scalar @ARGV; $n++) {
my $arg = $ARGV[$n];
if ($arg eq "--help") {
exec "man nixos-generate-config" or die;
}
elsif ($arg eq "--dir") {
$n++;
$outDir = $ARGV[$n];
die "$0: --dir requires an argument\n" unless defined $outDir;
}
elsif ($arg eq "--root") {
$n++;
$rootDir = $ARGV[$n];
die "$0: --root requires an argument\n" unless defined $rootDir;
$rootDir =~ s/\/*$//; # remove trailing slashes
}
elsif ($arg eq "--force") {
$force = 1;
}
elsif ($arg eq "--no-filesystems") {
$noFilesystems = 1;
}
elsif ($arg eq "--show-hardware-config") {
$showHardwareConfig = 1;
}
else {
die "$0: unrecognized argument $arg\n";
}
}
my @attrs = ();
my @kernelModules = ();
my @initrdKernelModules = ();
my @modulePackages = ();
my @imports = ("<nixpkgs/nixos/modules/installer/scan/not-detected.nix>");
sub debug {
return unless defined $ENV{"DEBUG"};
print STDERR @_;
}
my $cpuinfo = read_file "/proc/cpuinfo";
sub hasCPUFeature {
my $feature = shift;
return $cpuinfo =~ /^flags\s*:.* $feature( |$)/m;
}
# Detect the number of CPU cores.
my $cpus = scalar (grep {/^processor\s*:/} (split '\n', $cpuinfo));
# Virtualization support?
push @kernelModules, "kvm-intel" if hasCPUFeature "vmx";
push @kernelModules, "kvm-amd" if hasCPUFeature "svm";
# Look at the PCI devices and add necessary modules. Note that most
# modules are auto-detected so we don't need to list them here.
# However, some are needed in the initrd to boot the system.
my $videoDriver;
sub pciCheck {
my $path = shift;
my $vendor = read_file "$path/vendor"; chomp $vendor;
my $device = read_file "$path/device"; chomp $device;
my $class = read_file "$path/class"; chomp $class;
my $module;
if (-e "$path/driver/module") {
$module = basename `readlink -f $path/driver/module`;
chomp $module;
}
debug "$path: $vendor $device $class";
debug " $module" if defined $module;
debug "\n";
if (defined $module) {
# See the bottom of http://pciids.sourceforge.net/pci.ids for
# device classes.
if (# Mass-storage controller. Definitely important.
$class =~ /^0x01/ ||
# Firewire controller. A disk might be attached.
$class =~ /^0x0c00/ ||
# USB controller. Needed if we want to use the
# keyboard when things go wrong in the initrd.
$class =~ /^0x0c03/
)
{
push @initrdAvailableKernelModules, $module;
}
}
# broadcom STA driver (wl.ko)
# list taken from http://www.broadcom.com/docs/linux_sta/README.txt
if ($vendor eq "0x14e4" &&
($device eq "0x4311" || $device eq "0x4312" || $device eq "0x4313" ||
$device eq "0x4315" || $device eq "0x4327" || $device eq "0x4328" ||
$device eq "0x4329" || $device eq "0x432a" || $device eq "0x432b" ||
$device eq "0x432c" || $device eq "0x432d" || $device eq "0x4353" ||
$device eq "0x4357" || $device eq "0x4358" || $device eq "0x4359" ||
$device eq "0x4331" || $device eq "0x43a0" || $device eq "0x43b1"
) )
{
push @modulePackages, "\${config.boot.kernelPackages.broadcom_sta}";
push @kernelModules, "wl";
}
# Can't rely on $module here, since the module may not be loaded
# due to missing firmware. Ideally we would check modules.pcimap
# here.
push @attrs, "networking.enableIntel2200BGFirmware = true;" if
$vendor eq "0x8086" &&
($device eq "0x1043" || $device eq "0x104f" || $device eq "0x4220" ||
$device eq "0x4221" || $device eq "0x4223" || $device eq "0x4224");
push @attrs, "networking.enableIntel3945ABGFirmware = true;" if
$vendor eq "0x8086" &&
($device eq "0x4229" || $device eq "0x4230" ||
$device eq "0x4222" || $device eq "0x4227");
# Assume that all NVIDIA cards are supported by the NVIDIA driver.
# There may be exceptions (e.g. old cards).
# FIXME: do we want to enable an unfree driver here?
#$videoDriver = "nvidia" if $vendor eq "0x10de" && $class =~ /^0x03/;
}
foreach my $path (glob "/sys/bus/pci/devices/*") {
pciCheck $path;
}
push @attrs, "services.xserver.videoDrivers = [ \"$videoDriver\" ];" if $videoDriver;
# Idem for USB devices.
sub usbCheck {
my $path = shift;
my $class = read_file "$path/bInterfaceClass"; chomp $class;
my $subclass = read_file "$path/bInterfaceSubClass"; chomp $subclass;
my $protocol = read_file "$path/bInterfaceProtocol"; chomp $protocol;
my $module;
if (-e "$path/driver/module") {
$module = basename `readlink -f $path/driver/module`;
chomp $module;
}
debug "$path: $class $subclass $protocol";
debug " $module" if defined $module;
debug "\n";
if (defined $module) {
if (# Mass-storage controller. Definitely important.
$class eq "08" ||
# Keyboard. Needed if we want to use the
# keyboard when things go wrong in the initrd.
($class eq "03" && $protocol eq "01")
)
{
push @initrdAvailableKernelModules, $module;
}
}
}
foreach my $path (glob "/sys/bus/usb/devices/*") {
if (-e "$path/bInterfaceClass") {
usbCheck $path;
}
}
# Add the modules for all block devices.
foreach my $path (glob "/sys/class/block/*") {
my $module;
if (-e "$path/device/driver/module") {
$module = basename `readlink -f $path/device/driver/module`;
chomp $module;
push @initrdAvailableKernelModules, $module;
}
}
my $virt = `systemd-detect-virt`;
chomp $virt;
# Check if we're a VirtualBox guest. If so, enable the guest
# additions.
if ($virt eq "oracle") {
push @attrs, "services.virtualboxGuest.enable = true;"
}
# Likewise for QEMU.
if ($virt eq "qemu" || $virt eq "kvm" || $virt eq "bochs") {
push @imports, "<nixpkgs/nixos/modules/profiles/qemu-guest.nix>";
}
# For a device name like /dev/sda1, find a more stable path like
# /dev/disk/by-uuid/X or /dev/disk/by-label/Y.
sub findStableDevPath {
my ($dev) = @_;
return $dev if substr($dev, 0, 1) ne "/";
return $dev unless -e $dev;
my $st = stat($dev) or return $dev;
foreach my $dev2 (glob("/dev/disk/by-uuid/*"), glob("/dev/mapper/*"), glob("/dev/disk/by-label/*")) {
my $st2 = stat($dev2) or next;
return $dev2 if $st->rdev == $st2->rdev;
}
return $dev;
}
# Generate the swapDevices option from the currently activated swap
# devices.
my @swaps = read_file("/proc/swaps");
shift @swaps;
my @swapDevices;
foreach my $swap (@swaps) {
$swap =~ /^(\S+)\s/;
next unless -e $1;
my $dev = findStableDevPath $1;
push @swapDevices, "{ device = \"$dev\"; }";
}
# Generate the fileSystems option from the currently mounted
# filesystems.
sub in {
my ($d1, $d2) = @_;
return $d1 eq $d2 || substr($d1, 0, length($d2) + 1) eq "$d2/";
}
my $fileSystems;
my %fsByDev;
foreach my $fs (read_file("/proc/self/mountinfo")) {
chomp $fs;
my @fields = split / /, $fs;
my $mountPoint = $fields[4];
next unless -d $mountPoint;
my @mountOptions = split /,/, $fields[5];
next if !in($mountPoint, $rootDir);
$mountPoint = substr($mountPoint, length($rootDir)); # strip the root directory (e.g. /mnt)
$mountPoint = "/" if $mountPoint eq "";
# Skip special filesystems.
next if in($mountPoint, "/proc") || in($mountPoint, "/dev") || in($mountPoint, "/sys") || in($mountPoint, "/run") || $mountPoint eq "/var/lib/nfs/rpc_pipefs";
next if $mountPoint eq "/var/setuid-wrappers";
# Skip the optional fields.
my $n = 6; $n++ while $fields[$n] ne "-"; $n++;
my $fsType = $fields[$n];
my $device = $fields[$n + 1];
my @superOptions = split /,/, $fields[$n + 2];
# Skip the read-only bind-mount on /nix/store.
next if $mountPoint eq "/nix/store" && (grep { $_ eq "rw" } @superOptions) && (grep { $_ eq "ro" } @mountOptions);
# Maybe this is a bind-mount of a filesystem we saw earlier?
if (defined $fsByDev{$fields[2]}) {
# Make sure this isn't a btrfs subvolume
my ($status, @msg) = runCommand("btrfs subvol show $rootDir$mountPoint");
if (join("", @msg) =~ /ERROR:/) {
my $path = $fields[3]; $path = "" if $path eq "/";
my $base = $fsByDev{$fields[2]};
$base = "" if $base eq "/";
$fileSystems .= <<EOF;
fileSystems.\"$mountPoint\" =
{ device = \"$base$path\";
fsType = \"none\";
options = \"bind\";
};
EOF
next;
}
}
$fsByDev{$fields[2]} = $mountPoint;
# We don't know how to handle FUSE filesystems.
if ($fsType eq "fuseblk" || $fsType eq "fuse") {
print STDERR "warning: don't know how to emit fileSystem option for FUSE filesystem $mountPoint\n";
next;
}
# Is this a mount of a loopback device?
my @extraOptions;
if ($device =~ /\/dev\/loop(\d+)/) {
my $loopnr = $1;
my $backer = read_file "/sys/block/loop$loopnr/loop/backing_file";
if (defined $backer) {
chomp $backer;
$device = $backer;
push @extraOptions, "loop";
}
}
# Is this a btrfs filesystem?
if ($fsType eq "btrfs") {
my ($status, @id_info) = runCommand("btrfs subvol show $rootDir$mountPoint");
if ($status != 0 || join("", @msg) =~ /ERROR:/) {
die "Failed to retrieve subvolume info for $mountPoint\n";
}
my @ids = join("", @id_info) =~ m/Object ID:[ \t\n]*([^ \t\n]*)/;
if ($#ids > 0) {
die "Btrfs subvol name for $mountPoint listed multiple times in mount\n"
} elsif ($#ids == 0) {
my ($status, @path_info) = runCommand("btrfs subvol list $rootDir$mountPoint");
if ($status != 0) {
die "Failed to find $mountPoint subvolume id from btrfs\n";
}
my @paths = join("", @path_info) =~ m/ID $ids[0] [^\n]* path ([^\n]*)/;
if ($#paths > 0) {
die "Btrfs returned multiple paths for a single subvolume id, mountpoint $mountPoint\n";
} elsif ($#paths != 0) {
die "Btrfs did not return a path for the subvolume at $mountPoint\n";
}
push @extraOptions, "subvol=$paths[0]";
}
}
# Emit the filesystem.
$fileSystems .= <<EOF;
fileSystems.\"$mountPoint\" =
{ device = \"${\(findStableDevPath $device)}\";
fsType = \"$fsType\";
EOF
if (scalar @extraOptions > 0) {
$fileSystems .= <<EOF;
options = \"${\join ",", uniq(@extraOptions)}\";
EOF
}
$fileSystems .= <<EOF;
};
EOF
}
# Generate the hardware configuration file.
sub toNixExpr {
my $res = "";
foreach my $s (@_) {
$res .= " \"$s\"";
}
return $res;
}
sub multiLineList {
my $indent = shift;
return " [ ]" if !@_;
$res = "\n${indent}[ ";
my $first = 1;
foreach my $s (@_) {
$res .= "$indent " if !$first;
$first = 0;
$res .= "$s\n";
}
$res .= "$indent]";
return $res;
}
my $initrdAvailableKernelModules = toNixExpr(uniq @initrdAvailableKernelModules);
my $kernelModules = toNixExpr(uniq @kernelModules);
my $modulePackages = toNixExpr(uniq @modulePackages);
my $fsAndSwap = "";
if (!$noFilesystems) {
$fsAndSwap = "\n${fileSystems} ";
$fsAndSwap .= "swapDevices =" . multiLineList(" ", @swapDevices) . ";\n";
}
my $hwConfig = <<EOF;
# Do not modify this file! It was generated by nixos-generate-config
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, ... }:
{
imports =${\multiLineList(" ", @imports)};
boot.initrd.availableKernelModules = [$initrdAvailableKernelModules ];
boot.kernelModules = [$kernelModules ];
boot.extraModulePackages = [$modulePackages ];
$fsAndSwap
nix.maxJobs = $cpus;
${\join "", (map { " $_\n" } (uniq @attrs))}}
EOF
if ($showHardwareConfig) {
print STDOUT $hwConfig;
} else {
$outDir = "$rootDir$outDir";
my $fn = "$outDir/hardware-configuration.nix";
print STDERR "writing $fn...\n";
mkpath($outDir, 0, 0755);
write_file($fn, $hwConfig);
# Generate a basic configuration.nix, unless one already exists.
$fn = "$outDir/configuration.nix";
if ($force || ! -e $fn) {
print STDERR "writing $fn...\n";
my $bootloaderConfig;
if (-e "/sys/firmware/efi/efivars") {
$bootLoaderConfig = <<EOF;
# Use the gummiboot efi boot loader.
boot.loader.gummiboot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
EOF
} else {
$bootLoaderConfig = <<EOF;
# Use the GRUB 2 boot loader.
boot.loader.grub.enable = true;
boot.loader.grub.version = 2;
# Define on which hard drive you want to install Grub.
# boot.loader.grub.device = "/dev/sda";
EOF
}
write_file($fn, <<EOF);
# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running nixos-help).
{ config, pkgs, ... }:
{
imports =
[ # Include the results of the hardware scan.
./hardware-configuration.nix
];
$bootLoaderConfig
# networking.hostName = "nixos"; # Define your hostname.
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
# Select internationalisation properties.
# i18n = {
# consoleFont = "Lat2-Terminus16";
# consoleKeyMap = "us";
# defaultLocale = "en_US.UTF-8";
# };
# Set your time zone.
# time.timeZone = "Europe/Amsterdam";
# List packages installed in system profile. To search by name, run:
# \$ nix-env -qaP | grep wget
# environment.systemPackages = with pkgs; [
# wget
# ];
# List services that you want to enable:
# Enable the OpenSSH daemon.
# services.openssh.enable = true;
# Enable CUPS to print documents.
# services.printing.enable = true;
# Enable the X11 windowing system.
# services.xserver.enable = true;
# services.xserver.layout = "us";
# services.xserver.xkbOptions = "eurosign:e";
# Enable the KDE Desktop Environment.
# services.xserver.displayManager.kdm.enable = true;
# services.xserver.desktopManager.kde4.enable = true;
# Define a user account. Don't forget to set a password with passwd.
# users.extraUsers.guest = {
# isNormalUser = true;
# uid = 1000;
# };
}
EOF
} else {
print STDERR "warning: not overwriting existing $fn\n";
}
}
# workaround for a bug in substituteAll