blender/source/gameengine/VideoTexture/VideoFFmpeg.h

219 lines
5.6 KiB
C
Raw Normal View History

VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/* $Id$
-----------------------------------------------------------------------------
This source file is part of VideoTexture library
Copyright (c) 2007 The Zdeno Ash Miklas
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
Place - Suite 330, Boston, MA 02111-1307, USA, or go to
http://www.gnu.org/copyleft/lesser.txt.
-----------------------------------------------------------------------------
*/
/** \file VideoFFmpeg.h
* \ingroup bgevideotex
*/
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
#if !defined VIDEOFFMPEG_H
#define VIDEOFFMPEG_H
#ifdef WITH_FFMPEG
extern "C" {
#undef __cplusplus
#include <pthread.h>
#include "ffmpeg_compat.h"
#include "DNA_listBase.h"
#include "BLI_threads.h"
#include "BLI_blenlib.h"
#define __cplusplus
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
}
#if LIBAVFORMAT_VERSION_INT < (49 << 16)
#define FFMPEG_OLD_FRAME_RATE 1
#else
#define FFMPEG_CODEC_IS_POINTER 1
#endif
#if LIBAVFORMAT_VERSION_INT >= (52 << 16)
#define FFMPEG_PB_IS_POINTER 1
#endif
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
#ifdef FFMPEG_CODEC_IS_POINTER
static inline AVCodecContext* get_codec_from_stream(AVStream* stream)
{
return stream->codec;
}
#else
static inline AVCodecContext* get_codec_from_stream(AVStream* stream)
{
return &stream->codec;
}
#endif
#include "VideoBase.h"
#define CACHE_FRAME_SIZE 10
#define CACHE_PACKET_SIZE 30
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
// type VideoFFmpeg declaration
class VideoFFmpeg : public VideoBase
{
public:
/// constructor
VideoFFmpeg (HRESULT * hRslt);
/// destructor
virtual ~VideoFFmpeg ();
/// set initial parameters
VideoTexture: new VideoTexture.ImageFFmpeg to load and reload images. The FFmpeg library allows to load image files. Although it is possible to load images using the VideoFFmpeg class, it is not very efficient. The new class VideoTexture.ImageFFmpeg is dedicated to image management. Constructor: ----------- VideoTexture.ImageFFmpeg('image_file_name') Opens the file but does not load the texture yet. The file name can also be a network address. It can also be a video file name; in that case only the first image is loaded. Methods: ------- refresh(True) Loads the image to texture. You just need to call it once, the file is automatically closed after that and calling refresh() again will have no effect. reload('new_file_name') Reloads the image (if new_file_name is omitted) or loads a new image. The file is opened but the texture is not updated yet, you need to call refresh() once to load the texture. Attributes: ---------- status returns the image status: 2 : file opened, texture not loaded 3 : file closed, texture loaded image returns the image data as a string of RGBA pixel size returns the image size [x,y] scale get/set the scale flag. If the scale flag is False, the image is rescale to texture format using gluScaleImage() function, slow but good quality. If the scale flag is True, the image is rescaled using a fast but less accurate algorithm. flip get/set Y-flip flag. Set to True by default as FFmpeg always provides the image upside down filter get/set filter(s) on the image. Example:
2008-11-05 21:53:22 +00:00
void initParams (short width, short height, float rate, bool image=false);
/// open video/image file
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
virtual void openFile (char * file);
/// open video capture device
virtual void openCam (char * driver, short camIdx);
/// release video source
virtual bool release (void);
/// play video
virtual bool play (void);
/// pause video
virtual bool pause (void);
/// stop video
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
virtual bool stop (void);
/// set play range
virtual void setRange (double start, double stop);
/// set frame rate
virtual void setFrameRate (float rate);
// some specific getters and setters
int getPreseek(void) { return m_preseek; }
void setPreseek(int preseek) { if (preseek >= 0) m_preseek = preseek; }
bool getDeinterlace(void) { return m_deinterlace; }
void setDeinterlace(bool deinterlace) { m_deinterlace = deinterlace; }
VideoTexture: new VideoTexture.ImageFFmpeg to load and reload images. The FFmpeg library allows to load image files. Although it is possible to load images using the VideoFFmpeg class, it is not very efficient. The new class VideoTexture.ImageFFmpeg is dedicated to image management. Constructor: ----------- VideoTexture.ImageFFmpeg('image_file_name') Opens the file but does not load the texture yet. The file name can also be a network address. It can also be a video file name; in that case only the first image is loaded. Methods: ------- refresh(True) Loads the image to texture. You just need to call it once, the file is automatically closed after that and calling refresh() again will have no effect. reload('new_file_name') Reloads the image (if new_file_name is omitted) or loads a new image. The file is opened but the texture is not updated yet, you need to call refresh() once to load the texture. Attributes: ---------- status returns the image status: 2 : file opened, texture not loaded 3 : file closed, texture loaded image returns the image data as a string of RGBA pixel size returns the image size [x,y] scale get/set the scale flag. If the scale flag is False, the image is rescale to texture format using gluScaleImage() function, slow but good quality. If the scale flag is True, the image is rescaled using a fast but less accurate algorithm. flip get/set Y-flip flag. Set to True by default as FFmpeg always provides the image upside down filter get/set filter(s) on the image. Example:
2008-11-05 21:53:22 +00:00
char *getImageName(void) { return (m_isImage) ? m_imageName.Ptr() : NULL; }
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
protected:
// format and codec information
AVCodec *m_codec;
AVFormatContext *m_formatCtx;
AVCodecContext *m_codecCtx;
// raw frame extracted from video file
AVFrame *m_frame;
// deinterlaced frame if codec requires it
AVFrame *m_frameDeinterlaced;
// decoded RGB24 frame if codec requires it
AVFrame *m_frameRGB;
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
// conversion from raw to RGB is done with sws_scale
struct SwsContext *m_imgConvertCtx;
// should the codec be deinterlaced?
bool m_deinterlace;
// number of frame of preseek
int m_preseek;
// order number of stream holding the video in format context
int m_videoStream;
// the actual frame rate
double m_baseFrameRate;
/// last displayed frame
long m_lastFrame;
/// end of file reached
bool m_eof;
/// flag to indicate that time is coming from application
bool m_externTime;
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// current file pointer position in file expressed in frame number
long m_curPosition;
/// time of video play start
double m_startTime;
/// width of capture in pixel
short m_captWidth;
/// height of capture in pixel
short m_captHeight;
/// frame rate of capture in frames per seconds
float m_captRate;
VideoTexture: new VideoTexture.ImageFFmpeg to load and reload images. The FFmpeg library allows to load image files. Although it is possible to load images using the VideoFFmpeg class, it is not very efficient. The new class VideoTexture.ImageFFmpeg is dedicated to image management. Constructor: ----------- VideoTexture.ImageFFmpeg('image_file_name') Opens the file but does not load the texture yet. The file name can also be a network address. It can also be a video file name; in that case only the first image is loaded. Methods: ------- refresh(True) Loads the image to texture. You just need to call it once, the file is automatically closed after that and calling refresh() again will have no effect. reload('new_file_name') Reloads the image (if new_file_name is omitted) or loads a new image. The file is opened but the texture is not updated yet, you need to call refresh() once to load the texture. Attributes: ---------- status returns the image status: 2 : file opened, texture not loaded 3 : file closed, texture loaded image returns the image data as a string of RGBA pixel size returns the image size [x,y] scale get/set the scale flag. If the scale flag is False, the image is rescale to texture format using gluScaleImage() function, slow but good quality. If the scale flag is True, the image is rescaled using a fast but less accurate algorithm. flip get/set Y-flip flag. Set to True by default as FFmpeg always provides the image upside down filter get/set filter(s) on the image. Example:
2008-11-05 21:53:22 +00:00
/// is file an image?
bool m_isImage;
/// is image loading done in a separate thread?
bool m_isThreaded;
/// is streaming or camera?
bool m_isStreaming;
VideoTexture: new VideoTexture.ImageFFmpeg to load and reload images. The FFmpeg library allows to load image files. Although it is possible to load images using the VideoFFmpeg class, it is not very efficient. The new class VideoTexture.ImageFFmpeg is dedicated to image management. Constructor: ----------- VideoTexture.ImageFFmpeg('image_file_name') Opens the file but does not load the texture yet. The file name can also be a network address. It can also be a video file name; in that case only the first image is loaded. Methods: ------- refresh(True) Loads the image to texture. You just need to call it once, the file is automatically closed after that and calling refresh() again will have no effect. reload('new_file_name') Reloads the image (if new_file_name is omitted) or loads a new image. The file is opened but the texture is not updated yet, you need to call refresh() once to load the texture. Attributes: ---------- status returns the image status: 2 : file opened, texture not loaded 3 : file closed, texture loaded image returns the image data as a string of RGBA pixel size returns the image size [x,y] scale get/set the scale flag. If the scale flag is False, the image is rescale to texture format using gluScaleImage() function, slow but good quality. If the scale flag is True, the image is rescaled using a fast but less accurate algorithm. flip get/set Y-flip flag. Set to True by default as FFmpeg always provides the image upside down filter get/set filter(s) on the image. Example:
2008-11-05 21:53:22 +00:00
/// keep last image name
STR_String m_imageName;
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// image calculation
virtual void calcImage (unsigned int texId, double ts);
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// set actual position
void setPositions (void);
/// get actual framerate
double actFrameRate (void) { return m_frameRate * m_baseFrameRate; }
/// common function to video file and capture
int openStream(const char *filename, AVInputFormat *inputFormat, AVFormatParameters *formatParams);
/// check if a frame is available and load it in pFrame, return true if a frame could be retrieved
AVFrame* grabFrame(long frame);
/// in case of caching, put the frame back in free queue
void releaseFrame(AVFrame* frame);
/// start thread to load the video file/capture/stream
bool startCache();
void stopCache();
private:
typedef struct {
Link link;
long framePosition;
AVFrame *frame;
} CacheFrame;
typedef struct {
Link link;
AVPacket packet;
} CachePacket;
bool m_stopThread;
bool m_cacheStarted;
ListBase m_thread;
ListBase m_frameCacheBase; // list of frames that are ready
ListBase m_frameCacheFree; // list of frames that are unused
ListBase m_packetCacheBase; // list of packets that are ready for decoding
ListBase m_packetCacheFree; // list of packets that are unused
pthread_mutex_t m_cacheMutex;
AVFrame *allocFrameRGB();
static void *cacheThread(void *);
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
};
inline VideoFFmpeg * getFFmpeg (PyImage * self)
{
return static_cast<VideoFFmpeg*>(self->m_image);
}
#endif //WITH_FFMPEG
#endif