blender/doc/guides/interface_API.txt

462 lines
16 KiB
Plaintext
Raw Normal View History

2003-08-04 12:40:09 +00:00
---------------------------------------------------
Blender interface.c API toolkit notes
(july 2003, Ton Roosendaal)
---------------------------------------------------
Contents
1 General notes
1.1 C and H files
2. Windows & Blocks
2.1 Memory allocation
2.2 And how it works internally
3. API for uiBlock
3.1 uiBlock Controlling functions
3.2 Internal function to know
4. API for uiButton
4.1 UiDefBut
1. BUT
2. TOG or TOGN
2003-08-04 12:40:09 +00:00
TOG|BIT|<nr>
3. ROW
4. NUMSLI or HSVSLI
5. NUM
6. TEX
7. LABEL
8 SEPR
9. MENU
10. COL
2003-08-04 12:40:09 +00:00
4.2 Icon buttons
4.3 pulldown menus / block buttons
14. BLOCK
4.4 specials
15. KEYEVT
16. LINK and INLINK
4.5 uiButton control fuctions
----------------1. General notes
- The API is built with Blender in mind, with some buttons acting on lists of Blender data.
It was not meant to be available as a separate SDK, nor to be used for other applications.
- It works with only OpenGL calls, for the full 100%. This means that it has some quirks
built-in to work with all OS's and OpenGL versions. Especially frontbuffer drawing is
a continuous point of attention. Buttons can be drawn with any window matrix. However,
errors can still occur when buttons are created in windows with non-standard glViewports.
2003-08-04 12:40:09 +00:00
- The code was written to replace the old 1.8 button system, but under high pressure. Quite
some button methods from the old system were copied for that reason.
- I tried to design a unified GUI system, which equally works for pulldown menus, pop up menus,
and normal button layouts. Although it gives nice features and freedom in design, the code
looks quite hard to understand for that reason. Not all 'normal' pulldown menu features
could be hacked in easily, they just differ too much from other UI elements. Could be
looked at once...
- During the past period of NaN (beginning of 2002) someone tried to make a more 'high' level
API for it, with less low level defines and structure info needed in calling code. I am not
really sure if this was done well... or even finished. In the bottom of interface.c you can
see the 'new' API which is now used in Blender code. It used to be so much more simple!
Nevertheless, I will use that convention in this doc.
- Unfinished stuff: the code was scheduled to be expanded with 'floating blocks' which can
serve as permanent little button-fields in Blender windows. Think for example of having
an (optional) extra field in the 3d window displaying object loc/rot/size.
After that, the existing button windows can be reorganized in such blocks as well, allowing
a user to configure the genereal buttons layout (make vertical for example).
--------------1.1 C and H files
blender/source/blender/src/interface.c /* almost all code */
blender/source/blender/include/interface.h /* internals for previous code */
blender/source/blender/include/BIF_interface.h /* externals for previous code */
(the previous 2 include files have not been separated fully yet)
Color and icons stuff has been put in: (unfinished code, under development)
blender/source/blender/src/resources.c
blender/source/blender/include/BIF_resources.h
Related code:
blender/source/blender/src/toolbox.c (extra GUI elements built on top of this API)
--------------2. Windows & Blocks
All GUI elements are collected in uiBlocks, which in turn are linked together in a list that's
part of a Blender Area-window.
uiBlock *block = uiNewBlock(&curarea->uiblocks, "stuff", UI_EMBOSSX, UI_HELV, curarea->win);
2003-08-04 12:40:09 +00:00
The next code example makes a new block, and puts it in the list of blocks of the current active
Area:
uiDoBlocks(&curarea->uiblocks, event);
This code is usually available in each area-window event queue handler. You give uiDoBlocks
an event code, and the uiDoBlocks handles whatever is to be handled. Blocks can be
standard buttons or pull down menus. Can return immediately, or jump to an internal handling
loop.
2.1 Memory allocation
Important to know is that for this toolkit there's no difference in "creating blocks" or
"drawing blocks". In fact, for each window redraw all blocks are created again. Constructing
button interfaces in Blender always happens in the main drawing function itself.
Memory allocation is handled as follows:
- if in this window a uiBlock with the same name existed, it is freed
- when you close a window (or blender) the uiBlocks get freed.
- when you duplicate (split) a window, the uiBlocks get copied
2.2 And how it works internally
With a call to uiDoblocks, all blocks in the current active window are evaluated.
It walks through the lists in a rather complex manner:
- while(looping)
/* the normal buttons handling */
- for each block
- call uiDoBlock (handles buttons for single block)
- (end for)
/* at this moment, a new block can be created, for a menu */
/* so we create a 2nd loop for it */
- while first block is a menu
- if block is a menu and not initialized:
- initalize 'saveunder'
- draw it
- get event from queue
- call uiDoBlock (handles buttons for single block)
/* here, a new block again can be created, for a sub menu */
- if return "end" from uiDoBlock
restore 'saveunder's
free all menu blocks
exit from loop
- do tooltip if nothing has happened
- (end while)
- if there was menu, it does this loop once more
(when you click outside a menu, at another button)
- (end while)
- do tooltip if nothing has happened
-------------3. API for uiBlock
Create a new buttons block, and link it to the window:
uiBlock *uiNewBlock(ListBase *lb, char *name, short dt, short font, short win)
ListBase *lb pointer to list basis, where the block will be appended to (blenlib)
char *name unique name to identify the block. When the name exists in the list,
the old uiBlock gets freed.
short dt drawtype. See below
short font font id number
short win blender area-window id
drawtype:
UI_EMBOSSX 0 /* Rounded embossed button (standard in Blender) */
UI_EMBOSSW 1 /* Simpler embossed button */
UI_EMBOSSN 2 /* Button with no border */
UI_EMBOSSF 3 /* Square embossed button (file select) */
UI_EMBOSSM 4 /* Colored, for pulldown menus */
2012-07-04 12:19:50 +00:00
UI_EMBOSSP 5 /* Simple borderless colored button (like blender sensors) */
2003-08-04 12:40:09 +00:00
font:
UI_HELV 0 /* normal font */
UI_HELVB 1 /* bold font */
With the new truetype option in Blender, this is used for all font families
When a uiBlock is created, each uiButton that is defined gets the uiBlock properties.
Changing Block properties inbetween will affact uiButtons defined thereafter.
----------3.1 uiBlock Controlling functions:
void uiDrawBlock(block)
draws the block
void uiBlockSetCol(uiBlock *block, int col)
col:
BUTGREY,
BUTGREEN,
BUTBLUE,
BUTSALMON,
MIDGREY,
BUTPURPLE,
void uiBlockSetEmboss(uiBlock *block, int emboss)
changes drawtype
void uiBlockSetDirection(uiBlock *block, int direction)
for pop-up and pulldown menus:
direction:
UI_TOP
UI_DOWN
UI_LEFT
UI_RIGHT
void uiBlockSetXOfs(uiBlock *block, int xofs)
for menus, offset from parent
void uiBlockSetButmFunc(uiBlock *block, void (*menufunc)(void *arg, int event), void *arg)
sets function to be handled when a menu-block is marked "OK"
void uiAutoBlock(uiBlock *block, float minx, float miny, float sizex, float sizey, UI_BLOCK_ROWS)
Sets the buttons in this block to automatically align, and fit within boundaries.
Internally it allows multiple colums or rows as well. Only 'row order' has been implemented.
2003-08-04 12:40:09 +00:00
The uiDefBut definitions don't need coordinates as input here, but instead:
- first value (x1) to indicate row number
- width and height values (if filled in) will be used to define a relative width/height.
A call to uiDrawBlock will invoke the calculus to fit in all buttons.
---------- 3.2 Internal function to know:
These flags used to be accessible from outside of interface.c. Currently it is only
used elsewhere by toolbox.c, so it can be considered 'internal' somewhat.
void uiBlockSetFlag(uiBlock *block, int flag) /* block types, can be 'OR'ed */
UI_BLOCK_LOOP 1 a sublooping block, drawn in frontbuffer, i.e. menus
UI_BLOCK_REDRAW 2 block needs a redraw
2003-11-21 13:16:04 +00:00
UI_BLOCK_RET_1 4 block is closed when an event happens with value '1' (press key, not for mouse)
2003-08-04 12:40:09 +00:00
UI_BLOCK_BUSY 8 internal
UI_BLOCK_NUMSELECT 16 keys 1-2-...-9-0 can be used to select items
UI_BLOCK_ENTER_OK 32 enter key closes block with "OK"
(these values are being set within the interface.c and toolbox.c code.)
-------------4. API for uiButton
In Blender a button can do four things:
- directly visualize data, and write to it.
- put event codes (shorts) back in the queue, to be handled
- call a user-defined function pointer (while being pressed, etc)
- create and call another block (i.e. menu)
Internally, each button or menu item is a 'uiButton', with a generic API and handling:
ui_def_but(block, type, retval, str, x1, y1, x2, y2, poin, min, max, a1, a2, tip);
Beacause a lot of obscure generic (re-use) happens here, translation calls have been made
for each most button types individually.
-----------4.1 UiDefBut
uiBut *UiDefBut[CSIF]( uiBlock *block, int type, int retval, char *str,
short x1, short y1, short x2, short y2, xxxx *poin,
float min, float max, float a1, float a2, char *tip)
UiDefButC operatates on char
UiDefButS operatates on short
UiDefButI operatates on int
UiDefButF operatates on float
*block: current uiBlock pointer
type: see below
retval: return value, which is put back in queue
*str: button name
x1, y1: coordinates of left-lower corner
2007-01-29 23:36:26 +00:00
x2, y2: width, height
2003-08-04 12:40:09 +00:00
*poin: pointer to char, short, int, float
min, max used for slider buttons
a1, a2 extra info for some buttons
*tip: tooltip string
type:
1. BUT
Activation button. (like "Render")
Passing on a pointer is not needed
2. TOG or TOGN
2003-08-04 12:40:09 +00:00
Toggle button (like "Lock")
The pointer value is set either at 0 or 1
If pressed, it calls the optional function with arguments provided.
Type TOGN: works negative, when pressed it sets at 0
"|BIT|<nr>"
When added to type, it works on a single bit <nr> (lowest order bit: nr = '0')
3. ROW
2003-08-04 12:40:09 +00:00
Button that's part of a row.
in "min" you set a row-id number, in "max" the value you want *poin to be
assigned when you press the button. Always pass on these values as floats.
When this button is pressed, it sets the "max" value to *poin, and redraws
all buttons with the same row-id number.
4. NUMSLI or HSVSLI
Number-slider or hsv-slider button.
2003-08-04 12:40:09 +00:00
"min" and "max" are to clamp the value to.
If you want a button type "Col" to be updated, make 'a1' equal to 'retval'
from the COL button.
5. NUM
2003-08-04 12:40:09 +00:00
Number button
Set the clamping values 'min' and 'max' always as float.
For UiDefButF, set a 'step' in 'a1', in 1/100's. The step value is the increment or
decrement when you click once on the right or left side of a button.
The optional button function is additionally called for each change of the *poin value.
6. TEX
2003-08-04 12:40:09 +00:00
Text string button.
Pointertype is standard a char. Value 'max' is length of string (pass as float).
When button is left with ESC, it doesn't put the 'retval' at the queue.
7. LABEL
2003-08-04 12:40:09 +00:00
Label button.
Only displays text.
If 'min' is set at 1.0, the text is printed in white.
8 SEPR
2003-08-04 12:40:09 +00:00
A separator line, typically used within pulldown menus.
9. MENU
2003-08-04 12:40:09 +00:00
Menu button.
The syntax of the string in *name defines the menu items:
- %t means the previous text becomes the title
- item separator is '|'
- return values are indicated with %x[nr] (i.e: %x12).
without returnvalues, the first item gets value 0 (incl. title!)
Example: "Do something %t| turn left %2| turn right %1| nothing %0"
10. COLOR
2003-08-04 12:40:09 +00:00
A special button that only visualizes a RGB value
In 'retval' you can put a code, which is used to identify for sliders if it needs
redraws while using the sliders. Check button '5'.
As *poin you input the pointer to the 'r' value, 'g' and 'b' are supposed to be
next to that.
------------4.2 Icon buttons
Instead of a 'name', all buttons as described for uiDefBut also can have an icon:
uiBut *uiDefIconBut(uiBlock *block, int type, int retval, int icon,
short x1, short y1, short x2, short y2, void *poin,
float min, float max, float a1, float a2, char *tip)
Same syntax and types available as previous uiDefBut, but now with an icon code
instead of a name. The icons are numbered in resources.c
2003-08-04 12:40:09 +00:00
uiBut *uiDefIconTextButF(uiBlock *block, int type, int retval, int icon, char *str,
short x1, short y1, short x2, short y2, float *poin,
float min, float max, float a1, float a2, char *tip)
Same again, but now with an icon and string as button name.
-----------4.3 pulldown menus / block buttons
14. BLOCK
void uiDefBlockBut(uiBlock *block, uiBlockFuncFP func, void *arg, char *str,
short x1, short y1, short x2, short y2, char *tip)
This button creates a new block when pressed. The function argument 'func' is called
to take care of this. An example func:
static uiBlock *info_file_importmenu(void *arg_unused)
{
uiBlock *block;
short yco = 0, xco = 20;
2003-08-04 12:40:09 +00:00
block = uiNewBlock(&curarea->uiblocks, "importmenu", UI_EMBOSSW, UI_HELV, G.curscreen->mainwin);
2003-08-04 12:40:09 +00:00
uiBlockSetXOfs(block, -40); // offset to parent button
/* flags are defines */
uiDefBut(block, LABEL, 0, "VRML 2.0 options", xco, yco, 125, 19, NULL, 0.0, 0.0, 0, 0, "");
uiDefButS(block, TOG|BIT|0, 0, "SepLayers", xco, yco-=20, 75, 19, &U.vrmlflag, 0.0, 0.0, 0, 0, "");
uiDefButS(block, TOG|BIT|1, 0, "Scale 1/100", xco, yco-=20, 75, 19, &U.vrmlflag, 0.0, 0.0, 0, 0, "");
uiDefButS(block, TOG|BIT|2, 0, "Two Sided", xco, yco-=20, 75, 19, &U.vrmlflag, 0.0, 0.0, 0, 0, "");
uiBlockSetDirection(block, UI_RIGHT);
uiTextBoundsBlock(block, 50); /* checks for fontsize */
2003-08-04 12:40:09 +00:00
return block;
}
The uiDef coordinates here are only relative. When this function is called, the interface
code automatically makes sure the buttons fit in the menu nicely.
Inside a menu uiBlock, other uiBlocks can be invoked to make a hierarchical menu.
-----------4.4 specials
15. KEYEVT
void uiDefKeyevtButS(uiBlock *block, int retval, char *str,
short x1, short y1, short x2, short y2, short *spoin, char *tip)
A special button, which stores a keyvalue in *spoin. When the button is pressed,
it displays the text 'Press any Key'. A keypress then stores the value.
16. LINK and INLINK
These button present a method of linking data in Blender, by drawing a line from one
icon to another. It consists of two button types:
LINK, the 'linking from' part, can be:
- a single pointer to data (only one line allowed)
- an array of pointers to data. The LINK buttons system keeps track of allocating
space for the array, and set the correct pointers in it.
INLINK, the 'linking to' part activates creating a link, when a user releases the mouse
cursor over it, while dragging a line from the LINK button.
These buttons are defined as follows:
uiBut but= uiDefIconBut(block, LINK, 0, ICON_LINK, x1, y1, w, h, NULL, 0, 0, 0, 0, "");
/* create the LINK icon */
uiSetButLink(but, void **pt, void ***ppt, short *totlink, short fromcode, short tocode);
**pt: pointer to pointer (only one link allowed)
***ppt: pointer to pointerpointer (an array of pointers)
(Either one of these values should be NULL)
fromcode: (currently unused)
tocode: a short indicating which blocks it can link to.
uiDefIconBut(block, INLINK, 0, ICON_INLINK, x1, y1, w, h, void *poin, short fromcode, 0, 0, 0, "");
poin: the pointer of the datablock you want to create links to
fromcode: a short identifying which LINK buttons can connect to it
------------- 4.5 uiButton control fuctions
void uiButSetFunc(uiBut *but, void (*func)(void *arg1, void *arg2), void *arg1, void *arg2)
When the button is pressed and released, it calls this function, with the 2 arguments.
void uiButSetFlag(uiBut *but, int flag)
set a flag for further control of button behaviour:
flag:
UI_TEXT_LEFT
int uiButGetRetVal(uiBut *but)
gives return value
</body>
<br><br><br>