blender/source/gameengine/VideoTexture/ImageRender.h

109 lines
3.2 KiB
C
Raw Normal View History

VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/* $Id$
-----------------------------------------------------------------------------
This source file is part of VideoTexture library
Copyright (c) 2007 The Zdeno Ash Miklas
This program is free software; you can redistribute it and/or modify it under
the terms of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59 Temple
Place - Suite 330, Boston, MA 02111-1307, USA, or go to
http://www.gnu.org/copyleft/lesser.txt.
-----------------------------------------------------------------------------
*/
/** \file ImageRender.h
* \ingroup bgevideotex
*/
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
#if !defined IMAGERENDER_H
#define IMAGERENDER_H
#include "Common.h"
#include <KX_Scene.h>
#include <KX_Camera.h>
#include <DNA_screen_types.h>
#include <RAS_ICanvas.h>
#include <RAS_IRasterizer.h>
#include <RAS_IRenderTools.h>
#include "ImageViewport.h"
/// class for render 3d scene
class ImageRender : public ImageViewport
{
public:
/// constructor
ImageRender (KX_Scene * scene, KX_Camera * camera);
VideoTexture: new ImageMirror class for easy mirror (and portal) creation The new class VideoTexture.ImageMirror() is available to perform automatic mirror rendering. Constructor: VideoTexture.ImageMirror(scene,observer,mirror,material) scene: reference to the scene that will be rendered. Both observer and mirror must be part of that scene. observer: reference to a game object used as view point for mirror rendering: the scene will be rendered through the mirror as if the active camera was at the observer location. Usually the observer is the active camera but you can use any game obejct. mirror: reference to the mesh object holding the mirror. material: material ID of the mirror texture as returned by VideoTexture.materialID(). The mirror is formed by the polygons mapped to that material. There are no specific methods or attributes. ImageMirror inherits all methods and attributes from ImageRender. You must refresh the parent VideoTexture.Texture object regularly to update the mirror rendering. Guidelines on how to create a working mirror: - Use a texture that is specific to the mirror so that the mirror rendering only appears on the mirror. - The mirror must be planar; the algorithm works well only for planar or quasi planar mirror. For spherical mirror, you will get better results with ImageRender and a camera at the center of the mirror. ImageMirror automatically computes the mirror orientation and position. The mirror doesn't need to be rectangular, it can be circular or take any form provided it is planar. - The mirror up direction must be along the Z axis in local mesh coordinates. If the mirror is not vertical, ImageMirror will compute the up direction as being the projection of the Z axis on the mirror plane. - UV mapping must be set right to get correct mirror rendering: - make a planar projection of the mirror polygons (Unwrap or projection from view) - eventually rotate the projection so that UV up direction corresponds to the mesh Z axis - scale the projection so that the extreme points touch the border of the texture - flip the UV projection horizontally (scale -1 on X axis). This is needed because the mirror texture is rendered from the back of the mirror and thus is reversed from the view point of the observer. Horizontal flip in the UV map restores the correct orientation. Besides these simple rules, the mirror rendering is completely automatic. In particular, you don't need to allocate a camera for the rendering, ImageMirror creates dynamically a camera for that. The reflection is correct even on large angles. The mirror can be a dynamic and moving object, the algorithm always computes the correct camera position based on observer relative position. You don't have to worry about mirror position in the scene: the algorithm automatically computes the camera frustum so that any object behind the mirror is not rendered. Warnings: - observer and mirror are references to game objects. ImageMirror keeps a pointer to them but does not increment the reference count. You must ensure that these game objects are not deleted as long as you refresh() the ImageMirror object. You must release the ImageMirror object before you delete the game objects. To release the ImageMirror object (normally stored in GameLogic), just assign it to None. - Mirror rendering is automatically skipped when the observer is behind the mirror but it is not disabled when the mirror is out of sight of the observer. You should only refresh the mirror when you know that the observer is likely to see it. For example, no need to refresh a car inner mirror when the player is not in the car. Example: contr = GameLogic.getCurrentController() # object holding the mirror mirror = contr.getOwner() scene = GameLogic.getCurrentScene() # observer will be the active camere camera = scene.getObjectList()['OBCamera'] matID = VideoTexture.materialID(mirror, 'IMmirror.png') GameLogic.mirror = VideoTexture.Texture(mirror, matID) GameLogic.mirror.source = VideoTexture.ImageMirror(scene,camera,mirror,matID) # to render the mirror, just call GameLogic.mirror.refresh(True) on each frame. You can download a demo game (with a video file) here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.zip For those who have already downloaded the demo, you can just update the blend file: http://home.scarlet.be/~tsi46445/blender/MirrorTextureDemo.blend
2008-12-04 16:07:46 +00:00
ImageRender (KX_Scene * scene, KX_GameObject * observer, KX_GameObject * mirror, RAS_IPolyMaterial * mat);
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// destructor
virtual ~ImageRender (void);
/// get background color
VideoTexture: new ImageRender class for Render To Texture The new class VideoTexture.ImageRender() is available to perform render to texture in the GE. Constructor: VideoTexture.ImageRender(scene,cam) cam : camera object that will be used for the render. It must be an inactive camera. scene: reference to the scene that will be rendered. The camera must be part of that scene. Returns an object that can be used as a source of a VideoTexture.Texture object Methods: none Attributes: background: 4-tuple representing the background color of the rendering as RGBA color components, each component being an integer between 0 and 255. Default value = [0,0,255,255] (=saturated blue) Note: athough the alpha component can be specified, it is not supported at the moment, the alpha channel of the rendered texture will always be 255. You can however introduce an alpha channel by appending a FilterBlueScreen() filter, it will set the alpha to 0 (transparent) on all pixels that were not rendered. capsize: 2-tuple representing the size of the render area as [x,y] number of pixels. Default value = largest rectangle with power of 2 dimensions that fits in the canvas You may want to reduce the render area to increase performance. For example, a render area of [256,128] is probably sufficient to implement a car inner mirror. For best performance, use power of 2 dimensions and don't set any filter: this allows direct transfer between the GPU frame buffer and texture memory without going through the host. alpha: Boolean indicating if the render alpha channel should be copied to the texture. Default value: False Experimental, do not use. whole: Boolean indicating if the entire canvas should be used for the rendering. Default value: False Note: There is no reason to set this attribute to True: the rendering will in any case be scaled down to the largest rectangle with power of 2 dimensions before transfering to the texture. Attributes inherited from the ImageBase class: image : image binary data, read-only size : [x,y] size of the texture, read-only scale : set to True for fast scale down in case the render area dimensions are not power of 2 flip : set to True for vertical flip. filter: set a post-processing filter on the render. Notes: * Aspect Ratio For consistent results in Blender and Blenderplayer, the same aspect ratio used by Blender to draw the camera viewport (Scene(F10)->Format tab->Size X/Size Y) is also used during the rendering. You can control the portion of the scene that will be rendered by "looking through the camera": the zone inside the outer dotted rectangle will be rendered to the texture. In order to reproduce the scene without X/Y distortion, you must apply the texture on an object or portion of object that has the same aspect ratio. * Order of rendering The rendereing is performed when you call the refresh() method of the parent Texture object. This happens outside the normal frame rendering and will have no effect on it. However, if you want to use ImageViewport and ImageRender at the same time, be sure to refresh the viewport texture before the render texture because the latter will destroy the frame buffer that is used by the former to update the texture. * Scene status The meshes are not updated during the render to texture: the rendered texture is one frame late to the rendered frame with regards to mesh deformation. * Example: cont = GameLogic.getCurrentController() # object that receives the texture obj = contr.getOwner() scene = GameLogic.getCurrentScene() # camera used for the render tvcam = scene.getObjectList()['OBtvcam'] # assume obj has some faces UV assigned to tv.png matID = VideoTexture.materialID(obj, 'IMtv.png') GameLogic.tv = VideoTexture.Texture(obj, matID) GameLogic.tv.source = VideoTexture.ImageRender(scene,tvcam) GameLogic.tv.source.capsize = [256,256] # to render the texture, just call GameLogic.tv.refresh(True) on each frame. You can download a demo game (with a video file) here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.zip For those who have already downloaded the demo, you can just update the blend file: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
2008-11-26 17:47:42 +00:00
int getBackground (int idx) { return (idx < 0 || idx > 3) ? 0 : int(m_background[idx]*255.f); }
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// set background color
VideoTexture: new ImageRender class for Render To Texture The new class VideoTexture.ImageRender() is available to perform render to texture in the GE. Constructor: VideoTexture.ImageRender(scene,cam) cam : camera object that will be used for the render. It must be an inactive camera. scene: reference to the scene that will be rendered. The camera must be part of that scene. Returns an object that can be used as a source of a VideoTexture.Texture object Methods: none Attributes: background: 4-tuple representing the background color of the rendering as RGBA color components, each component being an integer between 0 and 255. Default value = [0,0,255,255] (=saturated blue) Note: athough the alpha component can be specified, it is not supported at the moment, the alpha channel of the rendered texture will always be 255. You can however introduce an alpha channel by appending a FilterBlueScreen() filter, it will set the alpha to 0 (transparent) on all pixels that were not rendered. capsize: 2-tuple representing the size of the render area as [x,y] number of pixels. Default value = largest rectangle with power of 2 dimensions that fits in the canvas You may want to reduce the render area to increase performance. For example, a render area of [256,128] is probably sufficient to implement a car inner mirror. For best performance, use power of 2 dimensions and don't set any filter: this allows direct transfer between the GPU frame buffer and texture memory without going through the host. alpha: Boolean indicating if the render alpha channel should be copied to the texture. Default value: False Experimental, do not use. whole: Boolean indicating if the entire canvas should be used for the rendering. Default value: False Note: There is no reason to set this attribute to True: the rendering will in any case be scaled down to the largest rectangle with power of 2 dimensions before transfering to the texture. Attributes inherited from the ImageBase class: image : image binary data, read-only size : [x,y] size of the texture, read-only scale : set to True for fast scale down in case the render area dimensions are not power of 2 flip : set to True for vertical flip. filter: set a post-processing filter on the render. Notes: * Aspect Ratio For consistent results in Blender and Blenderplayer, the same aspect ratio used by Blender to draw the camera viewport (Scene(F10)->Format tab->Size X/Size Y) is also used during the rendering. You can control the portion of the scene that will be rendered by "looking through the camera": the zone inside the outer dotted rectangle will be rendered to the texture. In order to reproduce the scene without X/Y distortion, you must apply the texture on an object or portion of object that has the same aspect ratio. * Order of rendering The rendereing is performed when you call the refresh() method of the parent Texture object. This happens outside the normal frame rendering and will have no effect on it. However, if you want to use ImageViewport and ImageRender at the same time, be sure to refresh the viewport texture before the render texture because the latter will destroy the frame buffer that is used by the former to update the texture. * Scene status The meshes are not updated during the render to texture: the rendered texture is one frame late to the rendered frame with regards to mesh deformation. * Example: cont = GameLogic.getCurrentController() # object that receives the texture obj = contr.getOwner() scene = GameLogic.getCurrentScene() # camera used for the render tvcam = scene.getObjectList()['OBtvcam'] # assume obj has some faces UV assigned to tv.png matID = VideoTexture.materialID(obj, 'IMtv.png') GameLogic.tv = VideoTexture.Texture(obj, matID) GameLogic.tv.source = VideoTexture.ImageRender(scene,tvcam) GameLogic.tv.source.capsize = [256,256] # to render the texture, just call GameLogic.tv.refresh(True) on each frame. You can download a demo game (with a video file) here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.zip For those who have already downloaded the demo, you can just update the blend file: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
2008-11-26 17:47:42 +00:00
void setBackground (int red, int green, int blue, int alpha);
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// clipping distance
float getClip (void) { return m_clip; }
/// set whole buffer use
void setClip (float clip) { m_clip = clip; }
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
protected:
VideoTexture: new ImageMirror class for easy mirror (and portal) creation The new class VideoTexture.ImageMirror() is available to perform automatic mirror rendering. Constructor: VideoTexture.ImageMirror(scene,observer,mirror,material) scene: reference to the scene that will be rendered. Both observer and mirror must be part of that scene. observer: reference to a game object used as view point for mirror rendering: the scene will be rendered through the mirror as if the active camera was at the observer location. Usually the observer is the active camera but you can use any game obejct. mirror: reference to the mesh object holding the mirror. material: material ID of the mirror texture as returned by VideoTexture.materialID(). The mirror is formed by the polygons mapped to that material. There are no specific methods or attributes. ImageMirror inherits all methods and attributes from ImageRender. You must refresh the parent VideoTexture.Texture object regularly to update the mirror rendering. Guidelines on how to create a working mirror: - Use a texture that is specific to the mirror so that the mirror rendering only appears on the mirror. - The mirror must be planar; the algorithm works well only for planar or quasi planar mirror. For spherical mirror, you will get better results with ImageRender and a camera at the center of the mirror. ImageMirror automatically computes the mirror orientation and position. The mirror doesn't need to be rectangular, it can be circular or take any form provided it is planar. - The mirror up direction must be along the Z axis in local mesh coordinates. If the mirror is not vertical, ImageMirror will compute the up direction as being the projection of the Z axis on the mirror plane. - UV mapping must be set right to get correct mirror rendering: - make a planar projection of the mirror polygons (Unwrap or projection from view) - eventually rotate the projection so that UV up direction corresponds to the mesh Z axis - scale the projection so that the extreme points touch the border of the texture - flip the UV projection horizontally (scale -1 on X axis). This is needed because the mirror texture is rendered from the back of the mirror and thus is reversed from the view point of the observer. Horizontal flip in the UV map restores the correct orientation. Besides these simple rules, the mirror rendering is completely automatic. In particular, you don't need to allocate a camera for the rendering, ImageMirror creates dynamically a camera for that. The reflection is correct even on large angles. The mirror can be a dynamic and moving object, the algorithm always computes the correct camera position based on observer relative position. You don't have to worry about mirror position in the scene: the algorithm automatically computes the camera frustum so that any object behind the mirror is not rendered. Warnings: - observer and mirror are references to game objects. ImageMirror keeps a pointer to them but does not increment the reference count. You must ensure that these game objects are not deleted as long as you refresh() the ImageMirror object. You must release the ImageMirror object before you delete the game objects. To release the ImageMirror object (normally stored in GameLogic), just assign it to None. - Mirror rendering is automatically skipped when the observer is behind the mirror but it is not disabled when the mirror is out of sight of the observer. You should only refresh the mirror when you know that the observer is likely to see it. For example, no need to refresh a car inner mirror when the player is not in the car. Example: contr = GameLogic.getCurrentController() # object holding the mirror mirror = contr.getOwner() scene = GameLogic.getCurrentScene() # observer will be the active camere camera = scene.getObjectList()['OBCamera'] matID = VideoTexture.materialID(mirror, 'IMmirror.png') GameLogic.mirror = VideoTexture.Texture(mirror, matID) GameLogic.mirror.source = VideoTexture.ImageMirror(scene,camera,mirror,matID) # to render the mirror, just call GameLogic.mirror.refresh(True) on each frame. You can download a demo game (with a video file) here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.zip For those who have already downloaded the demo, you can just update the blend file: http://home.scarlet.be/~tsi46445/blender/MirrorTextureDemo.blend
2008-12-04 16:07:46 +00:00
/// true if ready to render
bool m_render;
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// rendered scene
KX_Scene * m_scene;
/// camera for render
KX_Camera * m_camera;
VideoTexture: new ImageMirror class for easy mirror (and portal) creation The new class VideoTexture.ImageMirror() is available to perform automatic mirror rendering. Constructor: VideoTexture.ImageMirror(scene,observer,mirror,material) scene: reference to the scene that will be rendered. Both observer and mirror must be part of that scene. observer: reference to a game object used as view point for mirror rendering: the scene will be rendered through the mirror as if the active camera was at the observer location. Usually the observer is the active camera but you can use any game obejct. mirror: reference to the mesh object holding the mirror. material: material ID of the mirror texture as returned by VideoTexture.materialID(). The mirror is formed by the polygons mapped to that material. There are no specific methods or attributes. ImageMirror inherits all methods and attributes from ImageRender. You must refresh the parent VideoTexture.Texture object regularly to update the mirror rendering. Guidelines on how to create a working mirror: - Use a texture that is specific to the mirror so that the mirror rendering only appears on the mirror. - The mirror must be planar; the algorithm works well only for planar or quasi planar mirror. For spherical mirror, you will get better results with ImageRender and a camera at the center of the mirror. ImageMirror automatically computes the mirror orientation and position. The mirror doesn't need to be rectangular, it can be circular or take any form provided it is planar. - The mirror up direction must be along the Z axis in local mesh coordinates. If the mirror is not vertical, ImageMirror will compute the up direction as being the projection of the Z axis on the mirror plane. - UV mapping must be set right to get correct mirror rendering: - make a planar projection of the mirror polygons (Unwrap or projection from view) - eventually rotate the projection so that UV up direction corresponds to the mesh Z axis - scale the projection so that the extreme points touch the border of the texture - flip the UV projection horizontally (scale -1 on X axis). This is needed because the mirror texture is rendered from the back of the mirror and thus is reversed from the view point of the observer. Horizontal flip in the UV map restores the correct orientation. Besides these simple rules, the mirror rendering is completely automatic. In particular, you don't need to allocate a camera for the rendering, ImageMirror creates dynamically a camera for that. The reflection is correct even on large angles. The mirror can be a dynamic and moving object, the algorithm always computes the correct camera position based on observer relative position. You don't have to worry about mirror position in the scene: the algorithm automatically computes the camera frustum so that any object behind the mirror is not rendered. Warnings: - observer and mirror are references to game objects. ImageMirror keeps a pointer to them but does not increment the reference count. You must ensure that these game objects are not deleted as long as you refresh() the ImageMirror object. You must release the ImageMirror object before you delete the game objects. To release the ImageMirror object (normally stored in GameLogic), just assign it to None. - Mirror rendering is automatically skipped when the observer is behind the mirror but it is not disabled when the mirror is out of sight of the observer. You should only refresh the mirror when you know that the observer is likely to see it. For example, no need to refresh a car inner mirror when the player is not in the car. Example: contr = GameLogic.getCurrentController() # object holding the mirror mirror = contr.getOwner() scene = GameLogic.getCurrentScene() # observer will be the active camere camera = scene.getObjectList()['OBCamera'] matID = VideoTexture.materialID(mirror, 'IMmirror.png') GameLogic.mirror = VideoTexture.Texture(mirror, matID) GameLogic.mirror.source = VideoTexture.ImageMirror(scene,camera,mirror,matID) # to render the mirror, just call GameLogic.mirror.refresh(True) on each frame. You can download a demo game (with a video file) here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.zip For those who have already downloaded the demo, you can just update the blend file: http://home.scarlet.be/~tsi46445/blender/MirrorTextureDemo.blend
2008-12-04 16:07:46 +00:00
/// do we own the camera?
bool m_owncamera;
/// for mirror operation
KX_GameObject * m_observer;
KX_GameObject * m_mirror;
float m_clip; // clipping distance
VideoTexture: new ImageMirror class for easy mirror (and portal) creation The new class VideoTexture.ImageMirror() is available to perform automatic mirror rendering. Constructor: VideoTexture.ImageMirror(scene,observer,mirror,material) scene: reference to the scene that will be rendered. Both observer and mirror must be part of that scene. observer: reference to a game object used as view point for mirror rendering: the scene will be rendered through the mirror as if the active camera was at the observer location. Usually the observer is the active camera but you can use any game obejct. mirror: reference to the mesh object holding the mirror. material: material ID of the mirror texture as returned by VideoTexture.materialID(). The mirror is formed by the polygons mapped to that material. There are no specific methods or attributes. ImageMirror inherits all methods and attributes from ImageRender. You must refresh the parent VideoTexture.Texture object regularly to update the mirror rendering. Guidelines on how to create a working mirror: - Use a texture that is specific to the mirror so that the mirror rendering only appears on the mirror. - The mirror must be planar; the algorithm works well only for planar or quasi planar mirror. For spherical mirror, you will get better results with ImageRender and a camera at the center of the mirror. ImageMirror automatically computes the mirror orientation and position. The mirror doesn't need to be rectangular, it can be circular or take any form provided it is planar. - The mirror up direction must be along the Z axis in local mesh coordinates. If the mirror is not vertical, ImageMirror will compute the up direction as being the projection of the Z axis on the mirror plane. - UV mapping must be set right to get correct mirror rendering: - make a planar projection of the mirror polygons (Unwrap or projection from view) - eventually rotate the projection so that UV up direction corresponds to the mesh Z axis - scale the projection so that the extreme points touch the border of the texture - flip the UV projection horizontally (scale -1 on X axis). This is needed because the mirror texture is rendered from the back of the mirror and thus is reversed from the view point of the observer. Horizontal flip in the UV map restores the correct orientation. Besides these simple rules, the mirror rendering is completely automatic. In particular, you don't need to allocate a camera for the rendering, ImageMirror creates dynamically a camera for that. The reflection is correct even on large angles. The mirror can be a dynamic and moving object, the algorithm always computes the correct camera position based on observer relative position. You don't have to worry about mirror position in the scene: the algorithm automatically computes the camera frustum so that any object behind the mirror is not rendered. Warnings: - observer and mirror are references to game objects. ImageMirror keeps a pointer to them but does not increment the reference count. You must ensure that these game objects are not deleted as long as you refresh() the ImageMirror object. You must release the ImageMirror object before you delete the game objects. To release the ImageMirror object (normally stored in GameLogic), just assign it to None. - Mirror rendering is automatically skipped when the observer is behind the mirror but it is not disabled when the mirror is out of sight of the observer. You should only refresh the mirror when you know that the observer is likely to see it. For example, no need to refresh a car inner mirror when the player is not in the car. Example: contr = GameLogic.getCurrentController() # object holding the mirror mirror = contr.getOwner() scene = GameLogic.getCurrentScene() # observer will be the active camere camera = scene.getObjectList()['OBCamera'] matID = VideoTexture.materialID(mirror, 'IMmirror.png') GameLogic.mirror = VideoTexture.Texture(mirror, matID) GameLogic.mirror.source = VideoTexture.ImageMirror(scene,camera,mirror,matID) # to render the mirror, just call GameLogic.mirror.refresh(True) on each frame. You can download a demo game (with a video file) here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.zip For those who have already downloaded the demo, you can just update the blend file: http://home.scarlet.be/~tsi46445/blender/MirrorTextureDemo.blend
2008-12-04 16:07:46 +00:00
float m_mirrorHalfWidth; // mirror width in mirror space
float m_mirrorHalfHeight; // mirror height in mirror space
MT_Point3 m_mirrorPos; // mirror center position in local space
MT_Vector3 m_mirrorZ; // mirror Z axis in local space
MT_Vector3 m_mirrorY; // mirror Y axis in local space
MT_Vector3 m_mirrorX; // mirror X axis in local space
VideoTexture: new ImageRender class for Render To Texture The new class VideoTexture.ImageRender() is available to perform render to texture in the GE. Constructor: VideoTexture.ImageRender(scene,cam) cam : camera object that will be used for the render. It must be an inactive camera. scene: reference to the scene that will be rendered. The camera must be part of that scene. Returns an object that can be used as a source of a VideoTexture.Texture object Methods: none Attributes: background: 4-tuple representing the background color of the rendering as RGBA color components, each component being an integer between 0 and 255. Default value = [0,0,255,255] (=saturated blue) Note: athough the alpha component can be specified, it is not supported at the moment, the alpha channel of the rendered texture will always be 255. You can however introduce an alpha channel by appending a FilterBlueScreen() filter, it will set the alpha to 0 (transparent) on all pixels that were not rendered. capsize: 2-tuple representing the size of the render area as [x,y] number of pixels. Default value = largest rectangle with power of 2 dimensions that fits in the canvas You may want to reduce the render area to increase performance. For example, a render area of [256,128] is probably sufficient to implement a car inner mirror. For best performance, use power of 2 dimensions and don't set any filter: this allows direct transfer between the GPU frame buffer and texture memory without going through the host. alpha: Boolean indicating if the render alpha channel should be copied to the texture. Default value: False Experimental, do not use. whole: Boolean indicating if the entire canvas should be used for the rendering. Default value: False Note: There is no reason to set this attribute to True: the rendering will in any case be scaled down to the largest rectangle with power of 2 dimensions before transfering to the texture. Attributes inherited from the ImageBase class: image : image binary data, read-only size : [x,y] size of the texture, read-only scale : set to True for fast scale down in case the render area dimensions are not power of 2 flip : set to True for vertical flip. filter: set a post-processing filter on the render. Notes: * Aspect Ratio For consistent results in Blender and Blenderplayer, the same aspect ratio used by Blender to draw the camera viewport (Scene(F10)->Format tab->Size X/Size Y) is also used during the rendering. You can control the portion of the scene that will be rendered by "looking through the camera": the zone inside the outer dotted rectangle will be rendered to the texture. In order to reproduce the scene without X/Y distortion, you must apply the texture on an object or portion of object that has the same aspect ratio. * Order of rendering The rendereing is performed when you call the refresh() method of the parent Texture object. This happens outside the normal frame rendering and will have no effect on it. However, if you want to use ImageViewport and ImageRender at the same time, be sure to refresh the viewport texture before the render texture because the latter will destroy the frame buffer that is used by the former to update the texture. * Scene status The meshes are not updated during the render to texture: the rendered texture is one frame late to the rendered frame with regards to mesh deformation. * Example: cont = GameLogic.getCurrentController() # object that receives the texture obj = contr.getOwner() scene = GameLogic.getCurrentScene() # camera used for the render tvcam = scene.getObjectList()['OBtvcam'] # assume obj has some faces UV assigned to tv.png matID = VideoTexture.materialID(obj, 'IMtv.png') GameLogic.tv = VideoTexture.Texture(obj, matID) GameLogic.tv.source = VideoTexture.ImageRender(scene,tvcam) GameLogic.tv.source.capsize = [256,256] # to render the texture, just call GameLogic.tv.refresh(True) on each frame. You can download a demo game (with a video file) here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.zip For those who have already downloaded the demo, you can just update the blend file: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
2008-11-26 17:47:42 +00:00
/// canvas
RAS_ICanvas* m_canvas;
/// rasterizer
RAS_IRasterizer* m_rasterizer;
/// render tools
RAS_IRenderTools* m_rendertools;
/// engine
KX_KetsjiEngine* m_engine;
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// background color
VideoTexture: new ImageRender class for Render To Texture The new class VideoTexture.ImageRender() is available to perform render to texture in the GE. Constructor: VideoTexture.ImageRender(scene,cam) cam : camera object that will be used for the render. It must be an inactive camera. scene: reference to the scene that will be rendered. The camera must be part of that scene. Returns an object that can be used as a source of a VideoTexture.Texture object Methods: none Attributes: background: 4-tuple representing the background color of the rendering as RGBA color components, each component being an integer between 0 and 255. Default value = [0,0,255,255] (=saturated blue) Note: athough the alpha component can be specified, it is not supported at the moment, the alpha channel of the rendered texture will always be 255. You can however introduce an alpha channel by appending a FilterBlueScreen() filter, it will set the alpha to 0 (transparent) on all pixels that were not rendered. capsize: 2-tuple representing the size of the render area as [x,y] number of pixels. Default value = largest rectangle with power of 2 dimensions that fits in the canvas You may want to reduce the render area to increase performance. For example, a render area of [256,128] is probably sufficient to implement a car inner mirror. For best performance, use power of 2 dimensions and don't set any filter: this allows direct transfer between the GPU frame buffer and texture memory without going through the host. alpha: Boolean indicating if the render alpha channel should be copied to the texture. Default value: False Experimental, do not use. whole: Boolean indicating if the entire canvas should be used for the rendering. Default value: False Note: There is no reason to set this attribute to True: the rendering will in any case be scaled down to the largest rectangle with power of 2 dimensions before transfering to the texture. Attributes inherited from the ImageBase class: image : image binary data, read-only size : [x,y] size of the texture, read-only scale : set to True for fast scale down in case the render area dimensions are not power of 2 flip : set to True for vertical flip. filter: set a post-processing filter on the render. Notes: * Aspect Ratio For consistent results in Blender and Blenderplayer, the same aspect ratio used by Blender to draw the camera viewport (Scene(F10)->Format tab->Size X/Size Y) is also used during the rendering. You can control the portion of the scene that will be rendered by "looking through the camera": the zone inside the outer dotted rectangle will be rendered to the texture. In order to reproduce the scene without X/Y distortion, you must apply the texture on an object or portion of object that has the same aspect ratio. * Order of rendering The rendereing is performed when you call the refresh() method of the parent Texture object. This happens outside the normal frame rendering and will have no effect on it. However, if you want to use ImageViewport and ImageRender at the same time, be sure to refresh the viewport texture before the render texture because the latter will destroy the frame buffer that is used by the former to update the texture. * Scene status The meshes are not updated during the render to texture: the rendered texture is one frame late to the rendered frame with regards to mesh deformation. * Example: cont = GameLogic.getCurrentController() # object that receives the texture obj = contr.getOwner() scene = GameLogic.getCurrentScene() # camera used for the render tvcam = scene.getObjectList()['OBtvcam'] # assume obj has some faces UV assigned to tv.png matID = VideoTexture.materialID(obj, 'IMtv.png') GameLogic.tv = VideoTexture.Texture(obj, matID) GameLogic.tv.source = VideoTexture.ImageRender(scene,tvcam) GameLogic.tv.source.capsize = [256,256] # to render the texture, just call GameLogic.tv.refresh(True) on each frame. You can download a demo game (with a video file) here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.zip For those who have already downloaded the demo, you can just update the blend file: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend
2008-11-26 17:47:42 +00:00
float m_background[4];
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
/// render 3d scene to image
virtual void calcImage (unsigned int texId, double ts);
VideoTexture module. The only compilation system that works for sure is the MSVC project files. I've tried my best to update the other compilation system but I count on the community to check and fix them. This is Zdeno Miklas video texture plugin ported to trunk. The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html) EXCEPT for the following: The module name is changed to VideoTexture (instead of blendVideoTex). A new (and only) video source is now available: VideoFFmpeg() You must pass 1 to 4 arguments when you create it (you can use named arguments): VideoFFmpeg(file) : play a video file VideoFFmpeg(file, capture, rate, width, height) : start a live video capture file: In the first form, file is a video file name, relative to startup directory. It can also be a URL, FFmpeg will happily stream a video from a network source. In the second form, file is empty or is a hint for the format of the video capture. In Windows, file is ignored and should be empty or not specified. In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394. The user specifies the type of device with the file parameter: [<device_type>][:<standard>] <device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l' <standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc' The driver name is constructed automatically from the device types: v4l : /dev/video<capture> dv1394: /dev/dv1394/<capture> If you have different driver name, you can specify the driver name explicitely instead of device type. Examples of valid file parameter: /dev/v4l/video0:pal /dev/ieee1394/1:ntsc dv1394:ntsc v4l:pal :secam capture: Defines the index number of the capture source, starting from 0. The first capture device is always 0. The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1. rate: the capture frame rate, by default 25 frames/sec width: height: Width and height of the video capture in pixel, default value 0. In Windows you must specify these values and they must fit with the capture device capability. For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480, you must specify one of these couple of values or the opening of the video source will fail. In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height. Simple example ************** 1. Texture definition script: import VideoTexture contr = GameLogic.getCurrentController() obj = contr.getOwner() if not hasattr(GameLogic, 'video'): matID = VideoTexture.materialID(obj, 'MAVideoMat') GameLogic.video = VideoTexture.Texture(obj, matID) GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg') # Streaming is also possible: #GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg') GameLogic.vidSrc.repeat = -1 # If the video dimensions are not a power of 2, scaling must be done before # sending the texture to the GPU. This is done by default with gluScaleImage() # but you can also use a faster, but less precise, scaling by setting scale # to True. Best approach is to convert the video offline and set the dimensions right. GameLogic.vidSrc.scale = True # FFmpeg always delivers the video image upside down, so flipping is enabled automatically #GameLogic.vidSrc.flip = True if contr.getSensors()[0].isPositive(): GameLogic.video.source = GameLogic.vidSrc GameLogic.vidSrc.play() 2. Texture refresh script: obj = GameLogic.getCurrentController().getOwner() if hasattr(GameLogic, 'video') != 0: GameLogic.video.refresh(True) You can download this demo here: http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blend http://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
2008-10-31 22:35:52 +00:00
void Render();
void SetupRenderFrame(KX_Scene *scene, KX_Camera* cam);
void RenderFrame(KX_Scene* scene, KX_Camera* cam);
void SetBackGround(KX_WorldInfo* wi);
void SetWorldSettings(KX_WorldInfo* wi);
};
#endif