Rename PHY_GetActiveScene() to KX_GetActiveScene(): more logical name
Add KX_GetActiveEngine()
new KX_KetsjiEngine::GetClockTime(void) to return current
render frame time: if the CPU does not keep up with the
frame rate, up to 5 consecutive logic frames are processed
between each render frame, so that the logic system stays
accurate even if the graphic system is slow. For the video
texture module, it is important to stay in sync with the
render frame: no need to update the texture for logic frame.
BL_Texture::swapTexture(): texture id manipulation
BL_Texture::getTex() : return material texture
Enable video support in ffmpeg for Linux.
kept as the original file, but that can't work correct for solving
relative paths once a .blend in another directory is loaded. The
reason it went OK with the apricot tech demo is that the images there
were lib linked into the level file, which still worked.
Now it sets G.sce to the current loaded .blend file. Note that the
python config file path still uses the first loaded .blend file so it
looks in the same location each time.
Also added some NULL pointer checks in the joystick code because it
was crashing there on Mac, there's similar checks in related functions
so I'm assuming this was just a missed case.
The constants KX_STATE1 to KX_STATE30 can be used
with setState() to change the object state in a
python controller. The constants are defined in the
GameLogic module so that the full name is
GameLogic.KX_STATE1 to GameLogic.KX_STATE30 but you
can simplify this with the import statement:
from GameLogic import *
cont = getCurrentController()
ob = cont.getOwner()
ob.setState(KX_STATE2) #go to state 2
KX_STATEx constants are defined as (1<<(x-1))
Binary operators |, &, ^ and ~ can be used to combine states:
You can activate more than one state at a time with the | operator:
ob.setState(KX_STATE1|KX_STATE2) #activate state 1 and 2, stop all others
You can add a state to the current state mask with:
state = ob.getState()
ob.setState(state|KX_STATE3) #activate state 3, keep others
You can substract a state to the current state mask with the & and operator:
state = ob.getState()
ob.setState(state&~KX_STATE2) #stop state 2, keep others
You can invert a state with the ^ operator:
state = ob.getState()
ob.setState(state^KX_STATE2) #invert state 2, keep others
saves a marshal'd GameLogic.globalDict to the blendfile path with the blend extension replaced with bgeconf
Use this in YoFrankie to save keyboard layout and graphics quality settings.
I'm getting this error now:
GPG_Application.cpp: In member function 'void GPG_Application::stopEngine()':
/System/Library/Frameworks/Python.framework/Versions/2.3/include/python2.3/marshal.h:12: error: too many arguments to function 'PyObject* PyMarshal_WriteObjectToString(PyObject*)'
GPG_Application.cpp:720: error: at this point in file
Are we offically not supporint older versions of python now? :)
Kent
the features that are needed to run the game. Compile tested with
scons, make, but not cmake, that seems to have an issue not related
to these changes. The changes include:
* GLSL support in the viewport and game engine, enable in the game
menu in textured draw mode.
* Synced and merged part of the duplicated blender and gameengine/
gameplayer drawing code.
* Further refactoring of game engine drawing code, especially mesh
storage changed a lot.
* Optimizations in game engine armatures to avoid recomputations.
* A python function to get the framerate estimate in game.
* An option take object color into account in materials.
* An option to restrict shadow casters to a lamp's layers.
* Increase from 10 to 18 texture slots for materials, lamps, word.
An extra texture slot shows up once the last slot is used.
* Memory limit for undo, not enabled by default yet because it
needs the .B.blend to be changed.
* Multiple undo for image painting.
* An offset for dupligroups, so not all objects in a group have to
be at the origin.
* removed macros that were not used much, some misleading.
* removed error string setting calls that overwrote the error set by PyArg_ParseTuple with a less useful one.
* use python macros Py_RETURN_NONE, Py_RETURN_TRUE, Py_RETURN_FALSE
GLEW
====
Added the GLEW opengl extension library into extern/, always compiled
into Blender now. This is much nicer than doing this kind of extension
management manually, and will be used in the game engine, for GLSL, and
other opengl extensions.
* According to the GLEW website it works on Windows, Linux, Mac OS X,
FreeBSD, Irix, and Solaris. There might still be platform specific
issues due to this commit, so let me know and I'll look into it.
* This means also that all extensions will now always be compiled in,
regardless of the glext.h on the platform where compilation happens.
Game Engine
===========
Refactoring of the use of opengl extensions and other drawing code
in the game engine, and cleaning up some hacks related to GLSL
integration. These changes will be merged into trunk too after this.
The game engine graphics demos & apricot level survived my tests,
but this could use some good testing of course.
For users: please test with the options "Generate Display Lists" and
"Vertex Arrays" enabled, these should be the fastest and are supposed
to be "unreliable", but if that's the case that's probably due to bugs
that can be fixed.
* The game engine now also uses GLEW for extensions, replacing the
custom opengl extensions code that was there. Removes a lot of
#ifdef's, but the runtime checks stay of course.
* Removed the WITHOUT_GLEXT environment variable. This was added to
work around a specific bug and only disabled multitexturing anyway.
It might also have caused a slowdown since it was retrieving the
environment variable for every vertex in immediate mode (bug #13680).
* Refactored the code to allow drawing skinned meshes with vertex
arrays too, removing some specific immediate mode drawing functions
for this that only did extra normal calculation. Now it always splits
vertices of flat faces instead.
* Refactored normal recalculation with some minor optimizations,
required for the above change.
* Removed some outdated code behind the __NLA_OLDDEFORM #ifdef.
* Fixed various bugs in setting of multitexture coordinates and vertex
attributes for vertex arrays. These were not being enabled/disabled
correct according to the opengl spec, leading to crashes. Also tangent
attributes used an immediate mode call for vertex arrays, which can't
work.
* Fixed use of uninitialized variable in RAS_TexVert.
* Exporting skinned meshes was doing O(n^2) lookups for vertices and
deform weights, now uses same trick as regular meshes.
Add a function GameLogic.expandPath() that works like Blender.sys.expandpath() and is also available in the BlenderPlayer.
Fix the game actuator in the BlenderPlayer to work like in Blender:
- try first to load the .blend from the current working directory
- if not found, try to load from the startup .blend or runtime base directory
[#7113] GE crash pressing as soon as P on 64 bit
Note: glext.h has been removed from the source
If you get errors compiling with it you have 2 options
download/install glext.h (preferred method)
or set WITH_BF_GLEXT=false
If your a user and having problems with game engine try
setting the env var: WITHOUT_GLEXT 1
Kent
stuff used for peach to the standard <GL/glu.h>
the mesa stuff was needed for the machines for peach but its
not the stanard location of the headers, now that its not
needed were switching it back.
Kent
[#7660] Solaris 10 x86 support (Makefiles)
Hopefully it will not mess up anything for anyone else. I removed
some hardcoded static libs and made NAN_*_LIB definitions so they could be
overridden, to allow greater flexability.
Let me know if there are any problems/questions.
Kent
I reviewed the code, suggested an update ( initialising accumulation buffer ), and tested the resulting update successfully.
It's great to see more GE developers!GE Patch by Hamed Zaghaghi to add motion blur to the GE ( using the accumulation buffer ).
I reviewed code and tested, gave some feedback ( initialising accumulation buffer ) which was implemented straight away, and re-reviewed.
It's great to have another GE coder on the team!
Cleared the python dictionary at the end of the game engine, should fix some issues,
also reverted the python controller changes, related to this
This should fix the following bugs:
[ #3789 ]
[ #3815 ]
possiblyy fixes:
[ #3834 ]
(with make, need to confirm with scons)
after cleaning the changes are in fact minimal, but the situation
is still quite a bit hackish.
Game engine coders, there is also quite a number of warnings that
need to be fixed.
current situation is that everything seems to work, but GLSL shaders
spew a lot of errors on console and blender may crash on exit when
a GLSL shader was used. ARB stuff works fine.
remove constraint fixed,
Bullet timestep now subdivides Blender game engine timestep, so it runs 60 hertz,
SphereShape reverted to old style, so no support for non-uniform scaled spheres for now,
Armatures are back
Split screen
Double sided lightning
Ambient lighting
Alpha test
Material IPO support (one per object atm)
Blender materials
GLSL shaders - Python access
Up to three texture samplers from the material panel ( 2D & Cube map )
Python access to a second set of uv coordinates
See http://www.elysiun.com/forum/viewtopic.php?t=58057
