This will be used by split kernel in order to compile most optimal kernel.
Maximum number of closures is actually being cached in the session, so viewport
rendering will not trigger kernel re-loading when number of closures goes down.
Previously we only had experimental flag passed to device's load_kernel() which
was all fine. But since we're gonna to have some extra parameters passed there
it makes sense to wrap them into a single struct, which will make it easier to
pass stuff around.
Expand Cycles to use the new baking API in Blender.
It works on the selected object, and the panel can be accessed in the Render panel (similar to where it is for the Blender Internal).
It bakes for the active texture of each material of the object. The active texture is currently defined as the active Image Texture node present in the material nodetree. If you don't want the baking to override an existent material, make sure the active Image Texture node is not connected to the nodetree. The active texture is also the texture shown in the viewport in the rendered mode.
Remember to save your images after the baking is complete.
Note: Bake currently only works in the CPU
Note: This is not supported by Cycles standalone because a lot of the work is done in Blender as part of the operator only, not the engine (Cycles).
Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Bake
Supported Passes:
-----------------
Data Passes
* Normal
* UV
* Diffuse/Glossy/Transmission/Subsurface/Emit Color
Light Passes
* AO
* Combined
* Shadow
* Diffuse/Glossy/Transmission/Subsurface/Emit Direct/Indirect
* Environment
Review: D421
Reviewed by: Campbell Barton, Brecht van Lommel, Sergey Sharybin, Thomas Dinge
Original design by Brecht van Lommel.
The entire commit history can be found on the branch: bake-cycles
Issue was caused by the wrong usage of OCIO GLSL binding API. To make it
work properly on pre-GLSL-1.3 drivers shader is to be enabled after the
texture is binded to the opengl context. Otherwise it wouldn't know the
proper texture size.
This is actually a regression in 2.70 and to be ported to 'a'.
except for curves, that's still missing from the OpenColorIO GLSL shader.
The pixels are stored in a half float texture, converterd from full float with
native GPU instructions and SIMD on the CPU, so it should be pretty quick.
Using a GLSL shader is useful for GPU render because it avoids a copy through
CPU memory.
* Added new option to chose the tile order.
In addition to the "Center" method, 4 new methods are available now, like Top -> Bottom and Right -> Left.
Thanks to Sergey for code review and some tweaks!
This option enables keeping loaded images in the memory in-between
of rendering.
Implemented by keeping render engine alive for until Render structure
is being freed.
Cycles will free all data when render finishes, optionally keeping
image manager untouched. All shaders, meshes, objects will be
re-allocated next time rendering happens.
Cycles cession and scene will be re-created from scratch if render/
scene parameters were changed.
This will also allow to keep compiled OSL shaders in memory without
need to re-compile them again.
P.S. Performance panel could be cleaned up a bit, not so much happy
with it's vertical alignment currently but not sure how to make
it look better.
P.P.S. Currently the only way to free images from the device is to
disable Persistent Images option and start rendering.
This commit adds memory usage information while rendering.
It reports memory used by device, meaning:
- For CPU it'll report real memory consumption
- For GPU rendering it'll report GPU memory consumption, but it'll
also mean the same memory is used from host side.
This information displays information about memory requested by Cycles,
not memory really allocated on a device. Real memory usage might be
higher because of memory fragmentation or optimistic memory allocator.
There's really nothing we can do against this.
Also in contrast with blender internal's render cycles memory usage
does not include memory used by scene, only memory needed by cycles
itself will be displayed. So don't freak out if memory usage reported
by cycles would be much lower than blender internal's.
This commit also adds RenderEngine.update_memory_stats callback which
is used to tell memory consumption from external engine to blender.
This information is used to generate information line after rendering
is finished.
Just makes progressive refine :)
This means the whole image would be refined gradually using as much
threads as it's set in performance settings. Having enough tiles is
required to have this option working as it's expected.
Technically it's implemented by repeatedly computing next sample for
all the tiles before switching to next sample.
This works around 7-12% slower than regular tile-based rendering, so
use this option only if you really need it.
This commit also fixes progressive update of image when Save Buffers
option is enabled.
And one more thing this commit fixes is handling display buffer with
Save Buffers option enabled. If this option is enabled image buffer
wouldn't have neither byte nor float buffer until image is fully
rendered which could backfire in missing image while rendering in
cases color management cache became full.
This issue solved by allocating byte buffer for image buffer from
tile update callback.
Patch was reviewed by Brecht. He also made some minor edits to
original version to patch. Thanks, man!
resolutions to render, to a "start resolution" which gives the resolution
to start at.
This avoids unnecessary rendering of small resolutions in small viewports,
and avoids long waiting on big viewports.
When the scene is updated Cycles resets the renderer device, cancelling
all existing tasks. The main thread would wait for all running tasks to
finish before continuing. This is ok when tasks can actually cancel in a
timely fashion. For OSL however, this does not work, since the OSL
shader group optimization takes quite a bit of time and can not be
easily be cancelled once running (on my crappy machine in full debug
mode: ~0.12 seconds for simple node trees). This would lead to very
laggy UI behavior and make it difficult to accurately control elements
such as sliders.
This patch removes the wait condition from the device->task_cancel
method. Instead it just sets the do_cancel flag and returns. To avoid
backlog in the task pool of the device it will return early from the
BlenderSession::sync function while the reset is going on (tested in
Session::resetting). Once all existing tasks have finished the do_cancel
flag is finally cleared again (checked in TaskPool::num_decrease).
Care has to be taken to avoid race conditions on the do_cancel flag,
since it can now be modified outside the TaskPool::cancel function
itself. For this purpose the scope of the TaskPool::num_mutex locks has
been extended, in most cases the mutex is now locked by the TaskPool
itself before calling TaskScheduler methods, instead of only locking
inside the num_increase/num_decrease functions themselves. The only
occurrence of a lock outside of the TaskPool methods is in
TaskScheduler::thread_run.
This patch is most useful in combination with the OSL renderer mode, so
it can probably wait until after the 2.64 release. SVM tasks tend to be
cancelled quickly, so the effect is less noticeable.
Regular rendering now works tiled, and supports save buffers to save memory
during render and cache render results.
Brick texture node by Thomas.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Brick_Texture
Image texture Blended Box Mapping.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Image_Texturehttp://mango.blender.org/production/blended_box/
Various bug fixes by Sergey and Campbell.
* Fix for reading freed memory in some node setups.
* Fix incorrect memory read when synchronizing mesh motion.
* Fix crash appearing when direct light usage is different on different layers.
* Fix for vector pass gives wrong result in some circumstances.
* Fix for wrong resolution used for rendering Render Layer node.
* Option to cancel rendering when doing initial synchronization.
* No more texture limit when using CPU render.
* Many fixes for new tiled rendering.
lower than 1.3, since we're not officially supporting these. We're already not
providing CUDA binaries for these, so better make it clear when compiling from
source too.
* Passes renamed to samples
* Camera lens radius renamed to aperature size/blades/rotation
* Glass and fresnel nodes input is now index of refraction
* Glossy and velvet fresnel socket removed
* Mix/add closure node renamed to mix/add shader node
* Blend weight node added for shader mixing weights
There is some version patching code for reading existing files, but it's not
perfect, so shaders may work a bit different.
* Fix missing update when editing objects with emission materials.
* Fix preview pass rendering set to 1 not showing full resolution.
* Fix CUDA runtime compiling failing due to missing cache directory.
* Use settings from first render layer for visibility and material override.
And a bunch of incomplete and still disabled code mostly related to closure
sampling.
* Add alpha pass output, to use set Transparent option in Film panel.
* Add Holdout closure (OSL terminology), this is like the Sky option in the
internal renderer, objects with this closure show the background / zero
alpha.
* Add option to use Gaussian instead of Box pixel filter in the UI.
* Remove camera response curves for now, they don't really belong here in
the pipeline, should be moved to compositor.
* Output full float values for rendering now, previously was only byte precision.
* Add a patch from Thomas to get a preview passes option, but still disabled
because it isn't quite working right yet.
* CUDA: don't compile shader graph evaluation inline.
* Convert tabs to spaces in python files.
* auto/fixed threads option is used now, patch by Thomas.
* remove unused CUDA_LIBRARIES, library is dynamically loaded
* fix mesh XML export operator for API update
