Originally we had 2DFilters (m_filtermanager) stored in RenderTools. That way filters were stored globally and were being called once per each scene. This was producing two big problems: (1) performance and (2) flexibility of use.
(1) Performance - To run the filters 2X == 2X slower
(2) flexibility of use - Very often we want the filter in the scene but not in the UI for example.
For those reasons I believe that 2DFilters with multiple scenes was very useless or unpredictable. I hope they work fine now.
To make it work as before (2.4) you can simply recreate the 2dfilter actuators across the scenes.
* * * * *
Imagine that we have:
(a) Main Scene
(b) Overlay Scene
in Main Scene the Z Buffer and RGB will be from the main scene.
in Overlay Scene the Z Buffer will be from the Overlay Scene and the RBG buffer is from both [(a + 2D Filter) + b].
So in pseudo code if we have a,b,c,d,e scenes we have: (2DFilterE(2DFilterD(2DFilterC(2DFilterB(2DFilterA(a) + b) + c) + d) + e)
This commit extend the technique of dynamic linked list to the mesh
slots so as to eliminate dumb scan or map lookup. It provides massive
performance improvement in the culling and in the rasterizer when
the majority of objects are static.
Other improvements:
- Compute the opengl matrix only for objects that are visible.
- Simplify hash function for GEN_HasedPtr
- Scan light list instead of general object list to render shadows
- Remove redundant opengl calls to set specularity, shinyness and diffuse
between each mesh slots.
- Cache GPU material to avoid frequent call to GPU_material_from_blender
- Only set once the fixed elements of mesh slot
- Use more inline function
The following table shows the performance increase between 2.48, 1st round
and this round of improvement. The test was done with a scene containing
40000 objects, of which 1000 are in the view frustrum approximately. The
object are simple textured cube to make sure the GPU is not the bottleneck.
As some of the rasterizer processing time has moved under culling, I present
the sum of scenegraph(includes culling)+rasterizer time
Scenegraph+rasterizer(ms) 2.48 1st round 3rd round
All objects static, 323.0 86.0 7.2
all visible, 1000 in
the view frustrum
All objects static, 219.0 49.7 N/A(*)
all invisible.
All objects moving, 323.0 105.6 34.7
all visible, 1000 in
the view frustrum
Scene destruction 40min 40min 4s
(*) : this time is not representative because the frame rate was at 60fps.
In that case, the GPU holds down the GE by frame sync. By design, the
overhead of the rasterizer is 0 when the the objects are invisible.
This table shows a global speed up between 9x and 45x compared to 2.48a
for scenegraph, culling and rasterizer overhead. The speed up goes much
higher when objects are invisible.
An additional 2-4x speed up is possible in the scenegraph by upgrading
the Moto library to use Eigen2 BLAS library instead of C++ classes but
the scenegraph is already so fast that it is not a priority right now.
Next speed up in logic: many things to do there...
Realtime modifiers applied on mesh objects will be supported in
the game engine with the following limitations:
- Only real time modifiers are supported (basically all of them!)
- Virtual modifiers resulting from parenting are not supported:
armature, curve, lattice. You can still use these modifiers
(armature is really not recommended) but in non parent mode.
The BGE has it's own parenting capability for armature.
- Modifiers are computed on the host (using blender modifier
stack).
- Modifiers are statically evaluated: any possible time dependency
in the modifiers is not supported (don't know enough about
modifiers to be more specific).
- Modifiers are reevaluated if the underlying mesh is deformed
due to shape action or armature action. Beware that this is
very CPU intensive; modifiers should really be used for static
objects only.
- Physics is still based on the original mesh: if you have a
mirror modifier, the physic shape will be limited to one half
of the resulting object. Therefore, the modifiers should
preferably be used on graphic objects.
- Scripts have no access to the modified mesh.
- Modifiers that are based on objects interaction (boolean,..)
will not be dependent on the objects position in the GE.
What you see in the 3D view is what you get in the GE regardless
on the object position, velocity, etc.
Besides that, the feature is compatible with all the BGE features
that affect meshes: armature action, shape action, relace mesh,
VideoTexture, add object, dupligroup.
Known problems:
- This feature is a bit hacky: the BGE uses the derived mesh draw
functions to display the object. This drawing method is a
bit slow and is not 100% compatible with the BGE. There may
be some problems in multi-texture mode: the multi-texture
coordinates are not sent to the GPU.
Texface and GLSL on the other hand should be fully supported.
- Culling is still based on the extend of the original mesh.
If you have a modifer that extends the size of the mesh,
the object may disappear while still in the view frustrum.
- Derived mesh is not shared between replicas.
The derived mesh is allocated and computed for each object
with modifiers, regardless if they are static replicas.
- Display list are not created on objects with modifiers.
I should be able to fix the above problems before release.
However, the feature is already useful for game development.
Once you are ready to release the game, you can apply the modifiers
to get back display list support and mesh sharing capability.
MSVC, scons, Cmake, makefile updated.
Enjoy
/benoit
the features that are needed to run the game. Compile tested with
scons, make, but not cmake, that seems to have an issue not related
to these changes. The changes include:
* GLSL support in the viewport and game engine, enable in the game
menu in textured draw mode.
* Synced and merged part of the duplicated blender and gameengine/
gameplayer drawing code.
* Further refactoring of game engine drawing code, especially mesh
storage changed a lot.
* Optimizations in game engine armatures to avoid recomputations.
* A python function to get the framerate estimate in game.
* An option take object color into account in materials.
* An option to restrict shadow casters to a lamp's layers.
* Increase from 10 to 18 texture slots for materials, lamps, word.
An extra texture slot shows up once the last slot is used.
* Memory limit for undo, not enabled by default yet because it
needs the .B.blend to be changed.
* Multiple undo for image painting.
* An offset for dupligroups, so not all objects in a group have to
be at the origin.
GLEW
====
Added the GLEW opengl extension library into extern/, always compiled
into Blender now. This is much nicer than doing this kind of extension
management manually, and will be used in the game engine, for GLSL, and
other opengl extensions.
* According to the GLEW website it works on Windows, Linux, Mac OS X,
FreeBSD, Irix, and Solaris. There might still be platform specific
issues due to this commit, so let me know and I'll look into it.
* This means also that all extensions will now always be compiled in,
regardless of the glext.h on the platform where compilation happens.
Game Engine
===========
Refactoring of the use of opengl extensions and other drawing code
in the game engine, and cleaning up some hacks related to GLSL
integration. These changes will be merged into trunk too after this.
The game engine graphics demos & apricot level survived my tests,
but this could use some good testing of course.
For users: please test with the options "Generate Display Lists" and
"Vertex Arrays" enabled, these should be the fastest and are supposed
to be "unreliable", but if that's the case that's probably due to bugs
that can be fixed.
* The game engine now also uses GLEW for extensions, replacing the
custom opengl extensions code that was there. Removes a lot of
#ifdef's, but the runtime checks stay of course.
* Removed the WITHOUT_GLEXT environment variable. This was added to
work around a specific bug and only disabled multitexturing anyway.
It might also have caused a slowdown since it was retrieving the
environment variable for every vertex in immediate mode (bug #13680).
* Refactored the code to allow drawing skinned meshes with vertex
arrays too, removing some specific immediate mode drawing functions
for this that only did extra normal calculation. Now it always splits
vertices of flat faces instead.
* Refactored normal recalculation with some minor optimizations,
required for the above change.
* Removed some outdated code behind the __NLA_OLDDEFORM #ifdef.
* Fixed various bugs in setting of multitexture coordinates and vertex
attributes for vertex arrays. These were not being enabled/disabled
correct according to the opengl spec, leading to crashes. Also tangent
attributes used an immediate mode call for vertex arrays, which can't
work.
* Fixed use of uninitialized variable in RAS_TexVert.
* Exporting skinned meshes was doing O(n^2) lookups for vertices and
deform weights, now uses same trick as regular meshes.
[#7113] GE crash pressing as soon as P on 64 bit
Note: glext.h has been removed from the source
If you get errors compiling with it you have 2 options
download/install glext.h (preferred method)
or set WITH_BF_GLEXT=false
If your a user and having problems with game engine try
setting the env var: WITHOUT_GLEXT 1
Kent
(with make, need to confirm with scons)
after cleaning the changes are in fact minimal, but the situation
is still quite a bit hackish.
Game engine coders, there is also quite a number of warnings that
need to be fixed.
current situation is that everything seems to work, but GLSL shaders
spew a lot of errors on console and blender may crash on exit when
a GLSL shader was used. ARB stuff works fine.
Materials are exported the best we can do by now. It will look almost as in
blender except for the missing procedural textures and some minor issues.
You have to tweak normal modulation amount to get the desired result cause
is not the same in yafray.
We added a panel in render space to adjust some yafray settings (GI and so)
Also we export transparency and reflection using new raytracing settings,
but that will be changed and improved soon.
Remember that you have to set YFexport path in user defaults and yafray must
be on path (version 0.0.6)
We added the "yafray" button to activate all this stuff in the render window.
Panel and settings are only shown when checked.
So now when activated the code calls yafray export instead of the internal
renderer and finally the resulting image is loaded back into render window's
buffer. So animation is also possible and results can be saved using blender
usual scheme.
