Commit Graph

27 Commits

Author SHA1 Message Date
Antony Riakiotakis
dda61cc82f Fix some definitions for MinGW64 2013-07-19 19:19:15 +00:00
Mitchell Stokes
dbec3af994 BGE: Fix for [#35737] "Action actuator in property mode don't work with values lower then 1" reported by HG1.
IPOs were only set as "initialized" if the current time was greater than 0.0, which is why negative values weren't working.
2013-06-24 04:24:01 +00:00
Campbell Barton
25591e958d style cleanup: tabs & whitespace 2012-11-03 15:35:03 +00:00
Campbell Barton
4d4664d98f code cleanup: check for msvc directly when using warning pragma's. 2012-10-15 02:15:07 +00:00
Antony Riakiotakis
4e6590067d revert 45924, not a very clean solution, especially for external libraries and looks like -fpermissive is used in linux too 2012-04-24 16:14:23 +00:00
Antony Riakiotakis
0db3c5f743 Remove mingw-w64 errors from loss of precision by converting 64bit pointers to ints. All cases found were harmless and the error behaviour could be turned off by the -fpermissive flag but I'd rather keep that off to detect any real problems should they arise. 2012-04-24 14:33:44 +00:00
Antony Riakiotakis
8b476d0275 First MinGW-w64 support for cmake has been added. To test I recommend this build:
http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win64/Personal%20Builds/ray_linn/GCC-4.7.0-with-ada/mingw-w64-gcc-4.7.0-runtime-2.0.1-static-ada-20120330.7z/download

Other builds may also work but due to the constantly changing nature of the compiler this cannot be guaranteed. I often had to change compilers while building the libraries and this one is the one that did the job for most of them.

This first support is experimental and considered "advanced". To enable pass -DWITH_MINGW64 during cmake configuration. Also make sure to extract the compiler on C:/MinGW and that MinGW/bin is in your path. To build check out lib/mingw64.

Initially the support is lacking until I get every library compiled correctly. For now you should disable WITH_CYCLES(sorry, I know some people are dying to do benchmarks, but still a few libs to go), WITH_IMAGE_OPENEXR, WITH_OPENCOLLADA, WITH_LIBMV and WITH_CODEC_FFMPEG(links but hangs on startup).

Still the tools are working, the memory limit is increased and due to the experimental nature of the setup, full optimization with SSE2 is available, which makes the build quite fast. Also the compiler and especially, the linker are way faster than regular MinGW.

The wiki docs have also updated. Happy testing!
2012-04-23 20:09:59 +00:00
Campbell Barton
51016c4dea split >120 length lines (mostly if statements) 2011-12-22 00:03:20 +00:00
Campbell Barton
4a04f72069 remove $Id: tags after discussion on the mailign list: http://markmail.org/message/fp7ozcywxum3ar7n 2011-10-23 17:52:20 +00:00
Nathan Letwory
bb6e7faf72 doxygen: gameengine/Ketsji tagged. 2011-02-25 13:35:59 +00:00
Nathan Letwory
5b607701a7 doxygen: prevent GPL license block from being parsed as doxygen comment. 2011-02-23 10:52:22 +00:00
Campbell Barton
9b518710c6 update for MingW/CMake
- ignore MSVC warnings when FREE_WINDOWS is defined to quiet warnings.
- the CMake flags were not being set correctly making blender have weirdo colors (no -funsigned-char).
2010-09-15 16:13:32 +00:00
Campbell Barton
8f1500da00 remove config.h references, was added for automake build system rev around 124-126 but isnt used by any build systems now. 2010-04-18 10:28:37 +00:00
Campbell Barton
081c1205a3 correct fsf address 2010-02-12 13:34:04 +00:00
Brecht Van Lommel
37e4a311b0 Math Lib
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
  conversion script instead, if they use a lot of math functions
  in new code:
  http://www.pasteall.org/9052/python
2009-11-10 20:43:45 +00:00
Benoit Bolsee
732c3ee66f BGE bug #18596: No ipo dynamics is 2.49rc1. 2009-05-11 23:05:13 +00:00
Campbell Barton
2eb85c01f3 remove warnings for the BGE
- variables that shadow vers declared earlier
- Py_Fatal print an error to the stderr
- gcc was complaining about the order of initialized vars (for classes)
- const return values for ints and bools didnt do anything.
- braces for ambiguous if  statements
2009-02-25 03:26:02 +00:00
Benoit Bolsee
005c5e6371 BGE bug #17657 fixed: dRotY doesn't work properly after 90 degrees rotation.
This problem is caused by discontinuities in the conversion
orientation matrix -> euler angles: the angle sign can
switch and thus the direction of the rotation produced
by the dRot Ipo.

To avoid this bug, the matrix->euler conversion must be 
avoided during the game. I took the following approach that 
is compatible with Blender (identical effect in the game and
in the 3D view):

- no change in Add mode: Rot and dRot are treated as additional
rotation to the orientation at the start of the Ipo. There is 
no matrix->euler conversion and thus no discontinuities. 

- Rot Ipo are treated as absolute rotation. All 3 axis should
be specified but if they are not, the startup object orientation
will be used to set the unspecified axis. By doing a matrix->
euler conversion once at the start, the discontinuities are
avoided. If there are also dRot curves, they are treated as
delta of the corresponding Rot curve or startup angle.

- dRot Ipo are treated as Add mode in Local axis.

Note about Add mode: Rot and dRot curves are treated identically
during the game. However, only dRot curves make sense because
they don't interfere with the object orientation in the 3D view.
2008-09-23 20:07:15 +00:00
Campbell Barton
6cccdf0cb2 BGE bugfix, ipo actuator's foce option didnt check that the object was dynamic. 2008-08-27 06:02:10 +00:00
Benoit Bolsee
d1fd99b070 BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system.
New Add mode for Ipo actuator
=============================
A new Add button, mutually exclusive with Force button, is available in
the Ipo actuator. When selected, it activates the Add mode that consists
in adding the Ipo curve to the current object situation in world
coordinates, or parent coordinates if the object has a parent. Scale Ipo
curves are multiplied instead of added to the object current scale.
If the local flag is selected, the Ipo curve is added (multiplied) in 
the object's local coordinates. 
Delta Ipo curves are handled identically to normal Ipo curve and there 
is no need to work with Delta Ipo curves provided that you make sure 
that the Ipo curve starts from origin. Origin means location 0 for 
Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for 
Scale Ipo curve.

The "current object situation" means the object's location, rotation 
and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo 
actuators, this means at the start of each loop. This initial state is
used as a base during the execution of the Ipo Curve but when the Ipo 
curve is restarted (later or immediately in case of Loop mode), the  
object current situation at that time is used as the new base.

For reference, here is the exact operation of the Add mode for each
type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale
and orientation matrix at the start of the curve; iLoc, iRot, iScale,
iMat: Ipo curve loc/rot/scale and orientation matrix resulting from
the rotation).

Location
  Local=false: newLoc = oLoc+iLoc
  Local=true : newLoc = oLoc+oScale*(oMat*iLoc)
Rotation
  Local=false: newMat = iMat*oMat
  Local=true : newMat = oMat*iMat
Scale
  Local=false: newScale = oScale*iScale
  Local=true : newScale = oScale*iScale

Add+Local mode is very useful to have dynamic object executing complex
movement relative to their current location/orientation. Of cource, 
dynamics should be disabled during the execution of the curve.

Several corrections in state system
===================================
- Object initial state is taken into account when adding object
  dynamically
- Fix bug with link count when adding object dynamically
- Fix false on-off detection for Actuator sensor when actuator is
  trigged on negative event.
- Fix Parent actuator false activation on negative event
- Loop Ipo curve not restarting at correct frame when start frame is
  different from one.
2008-07-08 12:18:43 +00:00
Chris Want
5d0a207ecb Patch from GSR that a) fixes a whole bunch of GPL/BL license
blocks that were previously missed; and b) greatly increase my
ohloh stats!
2008-04-16 22:40:48 +00:00
Benoit Bolsee
3444d6612a Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations:
1. All Ipo channels are now independent. 
In Blender 2.45, all 3 Loc Ipo channels were automatically set
together. For example, having just a LocX Ipo channel was sufficient
to fix the X, Y and Z coordinates, with the Y and Z value taken
from the object original Y and Z location in Blender. The same
was true for the 3 Rot and the 3 Scale Ipo channels: the missing
channels were assumed to have constant value taken from the object
original orientation/scale in Blender.
With this patch, all Ipo channels are now independent. 
THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to
define the 3 channels of a same type together in your Blend file:
the undefined Loc, Rot, Scale coordinates of the object will
be influenced by the parent/spawner Loc/Rot/Scale in case the
object is a child or dynamically created.

2. Delta Loc, Rot, Scale are now supported with the following
limitations:
- The delta Loc/Rot Ipo modify the object global (NOT local)
location/orientation
- The delta Scale change the object local scale
- The delta Ipo curves are relative to the object starting
Loc/Rot/Scale when the Ipo was first activated; after that, the
delta Ipo becomes global. This means that the object will return
to this initial Loc/Rot/Scale when you later restart the Ipo
curve, even if you had changed the object Loc/Rot/Scale in the
meantime. Of course this applies only to the specific Loc/Rot/Scale
coordinate that are defined in the Ipo channels as the channels
are now independent.

3. When the objects are converted from Blender to the BGE, the
delta Loc/Rot/Scale that might result from initial non-zero values
in delta Ipo Curves will be ignored. However, as soon as the
delta Ipo curve is activated, the non-zero values will be taken
into account and the object will jump to the same Loc/Rot/Scale
situation as in Blender. Note that delta Ipo curves with initial
non-zero values is bad practice; logically, a delta Ipo curver
should always start from 0.

4. If you define both a global and delta channel of the same
type (LocX and DLocX), the result will be a global channel equivalent
to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
Erwin Coumans
e1c66eb145 applied the 64-bit pointer patch submitted by Ken Hughes 2005-11-28 06:51:54 +00:00
Kester Maddock
c844aa265a Big patches:
Erwin Coumans: Abstract the physics engine
Charlie C: Joystick fixes
Me: Moved the ray cast (shadows, mouse sensor & ray sensor)
2005-03-25 10:33:39 +00:00
Nathan Letwory
00291b5cf4 [GameEngine] Commit all Kester's changes made to the gameengine to restore 2.25 like physics.
[SCons] Build with Solid as default when enabling the gameengine in the build process
[SCons] Build solid and qhull from the extern directory and link statically against them

That was about it.

There are a few things that needs double checking:

* Makefiles
* Projectfiles
* All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
2004-03-22 22:02:18 +00:00
Kent Mein
209a2ede2c Last of the config.h mods...
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif

added to these files.

Kent
--
mein@cs.umn.edu
2002-11-25 15:29:57 +00:00
Hans Lambermont
12315f4d0e Initial revision 2002-10-12 11:37:38 +00:00