blender/intern/cycles/kernel/kernel_accumulate.h
Lukas Stockner 26bf230920 Cycles: Add optional probabilistic termination of light samples based on their expected contribution
In scenes with many lights, some of them might have a very small contribution to some pixels, but the shadow rays are traced anyways.
To avoid that, this patch adds probabilistic termination to light samples - if the contribution before checking for shadowing is below a user-defined threshold, the sample will be discarded with probability (1 - (contribution / threshold)) and otherwise kept, but weighted more to remain unbiased.
This is the same approach that's also used in path termination based on length.

Note that the rendering remains unbiased with this option, it just adds a bit of noise - but if the setting is used moderately, the speedup gained easily outweighs the additional noise.

Reviewers: #cycles

Subscribers: sergey, brecht

Differential Revision: https://developer.blender.org/D2217
2016-10-30 11:31:28 +01:00

506 lines
15 KiB
C

/*
* Copyright 2011-2013 Blender Foundation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
CCL_NAMESPACE_BEGIN
/* BSDF Eval
*
* BSDF evaluation result, split per BSDF type. This is used to accumulate
* render passes separately. */
ccl_device_inline void bsdf_eval_init(BsdfEval *eval, ClosureType type, float3 value, int use_light_pass)
{
#ifdef __PASSES__
eval->use_light_pass = use_light_pass;
if(eval->use_light_pass) {
eval->diffuse = make_float3(0.0f, 0.0f, 0.0f);
eval->glossy = make_float3(0.0f, 0.0f, 0.0f);
eval->transmission = make_float3(0.0f, 0.0f, 0.0f);
eval->transparent = make_float3(0.0f, 0.0f, 0.0f);
eval->subsurface = make_float3(0.0f, 0.0f, 0.0f);
eval->scatter = make_float3(0.0f, 0.0f, 0.0f);
if(type == CLOSURE_BSDF_TRANSPARENT_ID)
eval->transparent = value;
else if(CLOSURE_IS_BSDF_DIFFUSE(type))
eval->diffuse = value;
else if(CLOSURE_IS_BSDF_GLOSSY(type))
eval->glossy = value;
else if(CLOSURE_IS_BSDF_TRANSMISSION(type))
eval->transmission = value;
else if(CLOSURE_IS_BSDF_BSSRDF(type))
eval->subsurface = value;
else if(CLOSURE_IS_PHASE(type))
eval->scatter = value;
}
else
#endif
{
eval->diffuse = value;
}
}
ccl_device_inline void bsdf_eval_accum(BsdfEval *eval, ClosureType type, float3 value)
{
#ifdef __PASSES__
if(eval->use_light_pass) {
if(CLOSURE_IS_BSDF_DIFFUSE(type))
eval->diffuse += value;
else if(CLOSURE_IS_BSDF_GLOSSY(type))
eval->glossy += value;
else if(CLOSURE_IS_BSDF_TRANSMISSION(type))
eval->transmission += value;
else if(CLOSURE_IS_BSDF_BSSRDF(type))
eval->subsurface += value;
else if(CLOSURE_IS_PHASE(type))
eval->scatter += value;
/* skipping transparent, this function is used by for eval(), will be zero then */
}
else
#endif
{
eval->diffuse += value;
}
}
ccl_device_inline bool bsdf_eval_is_zero(BsdfEval *eval)
{
#ifdef __PASSES__
if(eval->use_light_pass) {
return is_zero(eval->diffuse)
&& is_zero(eval->glossy)
&& is_zero(eval->transmission)
&& is_zero(eval->transparent)
&& is_zero(eval->subsurface)
&& is_zero(eval->scatter);
}
else
#endif
{
return is_zero(eval->diffuse);
}
}
ccl_device_inline void bsdf_eval_mul(BsdfEval *eval, float value)
{
#ifdef __PASSES__
if(eval->use_light_pass) {
eval->diffuse *= value;
eval->glossy *= value;
eval->transmission *= value;
eval->subsurface *= value;
eval->scatter *= value;
/* skipping transparent, this function is used by for eval(), will be zero then */
}
else
#endif
{
eval->diffuse *= value;
}
}
ccl_device_inline void bsdf_eval_mul3(BsdfEval *eval, float3 value)
{
#ifdef __PASSES__
if(eval->use_light_pass) {
eval->diffuse *= value;
eval->glossy *= value;
eval->transmission *= value;
eval->subsurface *= value;
eval->scatter *= value;
/* skipping transparent, this function is used by for eval(), will be zero then */
}
else
eval->diffuse *= value;
#else
eval->diffuse *= value;
#endif
}
ccl_device_inline float3 bsdf_eval_sum(BsdfEval *eval)
{
#ifdef __PASSES__
if(eval->use_light_pass) {
return eval->diffuse + eval->glossy + eval->transmission + eval->subsurface + eval->scatter;
}
else
#endif
return eval->diffuse;
}
/* Path Radiance
*
* We accumulate different render passes separately. After summing at the end
* to get the combined result, it should be identical. We definite directly
* visible as the first non-transparent hit, while indirectly visible are the
* bounces after that. */
ccl_device_inline void path_radiance_init(PathRadiance *L, int use_light_pass)
{
/* clear all */
#ifdef __PASSES__
L->use_light_pass = use_light_pass;
if(use_light_pass) {
L->indirect = make_float3(0.0f, 0.0f, 0.0f);
L->direct_throughput = make_float3(0.0f, 0.0f, 0.0f);
L->direct_emission = make_float3(0.0f, 0.0f, 0.0f);
L->color_diffuse = make_float3(0.0f, 0.0f, 0.0f);
L->color_glossy = make_float3(0.0f, 0.0f, 0.0f);
L->color_transmission = make_float3(0.0f, 0.0f, 0.0f);
L->color_subsurface = make_float3(0.0f, 0.0f, 0.0f);
L->color_scatter = make_float3(0.0f, 0.0f, 0.0f);
L->direct_diffuse = make_float3(0.0f, 0.0f, 0.0f);
L->direct_glossy = make_float3(0.0f, 0.0f, 0.0f);
L->direct_transmission = make_float3(0.0f, 0.0f, 0.0f);
L->direct_subsurface = make_float3(0.0f, 0.0f, 0.0f);
L->direct_scatter = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_diffuse = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_glossy = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_transmission = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_subsurface = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_scatter = make_float3(0.0f, 0.0f, 0.0f);
L->path_diffuse = make_float3(0.0f, 0.0f, 0.0f);
L->path_glossy = make_float3(0.0f, 0.0f, 0.0f);
L->path_transmission = make_float3(0.0f, 0.0f, 0.0f);
L->path_subsurface = make_float3(0.0f, 0.0f, 0.0f);
L->path_scatter = make_float3(0.0f, 0.0f, 0.0f);
L->emission = make_float3(0.0f, 0.0f, 0.0f);
L->background = make_float3(0.0f, 0.0f, 0.0f);
L->ao = make_float3(0.0f, 0.0f, 0.0f);
L->shadow = make_float4(0.0f, 0.0f, 0.0f, 0.0f);
L->mist = 0.0f;
}
else
#endif
{
L->emission = make_float3(0.0f, 0.0f, 0.0f);
}
}
ccl_device_inline void path_radiance_bsdf_bounce(PathRadiance *L, ccl_addr_space float3 *throughput,
BsdfEval *bsdf_eval, float bsdf_pdf, int bounce, int bsdf_label)
{
float inverse_pdf = 1.0f/bsdf_pdf;
#ifdef __PASSES__
if(L->use_light_pass) {
if(bounce == 0 && !(bsdf_label & LABEL_TRANSPARENT)) {
/* first on directly visible surface */
float3 value = *throughput*inverse_pdf;
L->path_diffuse = bsdf_eval->diffuse*value;
L->path_glossy = bsdf_eval->glossy*value;
L->path_transmission = bsdf_eval->transmission*value;
L->path_subsurface = bsdf_eval->subsurface*value;
L->path_scatter = bsdf_eval->scatter*value;
*throughput = L->path_diffuse + L->path_glossy + L->path_transmission + L->path_subsurface + L->path_scatter;
L->direct_throughput = *throughput;
}
else {
/* transparent bounce before first hit, or indirectly visible through BSDF */
float3 sum = (bsdf_eval_sum(bsdf_eval) + bsdf_eval->transparent) * inverse_pdf;
*throughput *= sum;
}
}
else
#endif
{
*throughput *= bsdf_eval->diffuse*inverse_pdf;
}
}
ccl_device_inline void path_radiance_accum_emission(PathRadiance *L, float3 throughput, float3 value, int bounce)
{
#ifdef __PASSES__
if(L->use_light_pass) {
if(bounce == 0)
L->emission += throughput*value;
else if(bounce == 1)
L->direct_emission += throughput*value;
else
L->indirect += throughput*value;
}
else
#endif
{
L->emission += throughput*value;
}
}
ccl_device_inline void path_radiance_accum_ao(PathRadiance *L, float3 throughput, float3 alpha, float3 bsdf, float3 ao, int bounce)
{
#ifdef __PASSES__
if(L->use_light_pass) {
if(bounce == 0) {
/* directly visible lighting */
L->direct_diffuse += throughput*bsdf*ao;
L->ao += alpha*throughput*ao;
}
else {
/* indirectly visible lighting after BSDF bounce */
L->indirect += throughput*bsdf*ao;
}
}
else
#endif
{
L->emission += throughput*bsdf*ao;
}
}
ccl_device_inline void path_radiance_accum_light(PathRadiance *L, float3 throughput, BsdfEval *bsdf_eval, float3 shadow, float shadow_fac, int bounce, bool is_lamp)
{
#ifdef __PASSES__
if(L->use_light_pass) {
if(bounce == 0) {
/* directly visible lighting */
L->direct_diffuse += throughput*bsdf_eval->diffuse*shadow;
L->direct_glossy += throughput*bsdf_eval->glossy*shadow;
L->direct_transmission += throughput*bsdf_eval->transmission*shadow;
L->direct_subsurface += throughput*bsdf_eval->subsurface*shadow;
L->direct_scatter += throughput*bsdf_eval->scatter*shadow;
if(is_lamp) {
L->shadow.x += shadow.x*shadow_fac;
L->shadow.y += shadow.y*shadow_fac;
L->shadow.z += shadow.z*shadow_fac;
}
}
else {
/* indirectly visible lighting after BSDF bounce */
L->indirect += throughput*bsdf_eval_sum(bsdf_eval)*shadow;
}
}
else
#endif
{
L->emission += throughput*bsdf_eval->diffuse*shadow;
}
}
ccl_device_inline void path_radiance_accum_background(PathRadiance *L, float3 throughput, float3 value, int bounce)
{
#ifdef __PASSES__
if(L->use_light_pass) {
if(bounce == 0)
L->background += throughput*value;
else if(bounce == 1)
L->direct_emission += throughput*value;
else
L->indirect += throughput*value;
}
else
#endif
{
L->emission += throughput*value;
}
}
ccl_device_inline void path_radiance_sum_indirect(PathRadiance *L)
{
#ifdef __PASSES__
/* this division is a bit ugly, but means we only have to keep track of
* only a single throughput further along the path, here we recover just
* the indirect path that is not influenced by any particular BSDF type */
if(L->use_light_pass) {
L->direct_emission = safe_divide_color(L->direct_emission, L->direct_throughput);
L->direct_diffuse += L->path_diffuse*L->direct_emission;
L->direct_glossy += L->path_glossy*L->direct_emission;
L->direct_transmission += L->path_transmission*L->direct_emission;
L->direct_subsurface += L->path_subsurface*L->direct_emission;
L->direct_scatter += L->path_scatter*L->direct_emission;
L->indirect = safe_divide_color(L->indirect, L->direct_throughput);
L->indirect_diffuse += L->path_diffuse*L->indirect;
L->indirect_glossy += L->path_glossy*L->indirect;
L->indirect_transmission += L->path_transmission*L->indirect;
L->indirect_subsurface += L->path_subsurface*L->indirect;
L->indirect_scatter += L->path_scatter*L->indirect;
}
#endif
}
ccl_device_inline void path_radiance_reset_indirect(PathRadiance *L)
{
#ifdef __PASSES__
if(L->use_light_pass) {
L->path_diffuse = make_float3(0.0f, 0.0f, 0.0f);
L->path_glossy = make_float3(0.0f, 0.0f, 0.0f);
L->path_transmission = make_float3(0.0f, 0.0f, 0.0f);
L->path_subsurface = make_float3(0.0f, 0.0f, 0.0f);
L->path_scatter = make_float3(0.0f, 0.0f, 0.0f);
L->direct_emission = make_float3(0.0f, 0.0f, 0.0f);
L->indirect = make_float3(0.0f, 0.0f, 0.0f);
}
#endif
}
ccl_device_inline void path_radiance_copy_indirect(PathRadiance *L,
const PathRadiance *L_src)
{
#ifdef __PASSES__
if(L->use_light_pass) {
L->path_diffuse = L_src->path_diffuse;
L->path_glossy = L_src->path_glossy;
L->path_transmission = L_src->path_transmission;
L->path_subsurface = L_src->path_subsurface;
L->path_scatter = L_src->path_scatter;
L->direct_emission = L_src->direct_emission;
L->indirect = L_src->indirect;
}
#endif
}
ccl_device_inline float3 path_radiance_clamp_and_sum(KernelGlobals *kg, PathRadiance *L)
{
float3 L_sum;
/* Light Passes are used */
#ifdef __PASSES__
float3 L_direct, L_indirect;
float clamp_direct = kernel_data.integrator.sample_clamp_direct;
float clamp_indirect = kernel_data.integrator.sample_clamp_indirect;
if(L->use_light_pass) {
path_radiance_sum_indirect(L);
L_direct = L->direct_diffuse + L->direct_glossy + L->direct_transmission + L->direct_subsurface + L->direct_scatter + L->emission;
L_indirect = L->indirect_diffuse + L->indirect_glossy + L->indirect_transmission + L->indirect_subsurface + L->indirect_scatter;
if(!kernel_data.background.transparent)
L_direct += L->background;
L_sum = L_direct + L_indirect;
float sum = fabsf((L_sum).x) + fabsf((L_sum).y) + fabsf((L_sum).z);
/* Reject invalid value */
if(!isfinite(sum)) {
kernel_assert(!"Non-finite sum in path_radiance_clamp_and_sum!");
L_sum = make_float3(0.0f, 0.0f, 0.0f);
L->direct_diffuse = make_float3(0.0f, 0.0f, 0.0f);
L->direct_glossy = make_float3(0.0f, 0.0f, 0.0f);
L->direct_transmission = make_float3(0.0f, 0.0f, 0.0f);
L->direct_subsurface = make_float3(0.0f, 0.0f, 0.0f);
L->direct_scatter = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_diffuse = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_glossy = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_transmission = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_subsurface = make_float3(0.0f, 0.0f, 0.0f);
L->indirect_scatter = make_float3(0.0f, 0.0f, 0.0f);
L->emission = make_float3(0.0f, 0.0f, 0.0f);
}
/* Clamp direct and indirect samples */
#ifdef __CLAMP_SAMPLE__
else if(sum > clamp_direct || sum > clamp_indirect) {
float scale;
/* Direct */
float sum_direct = fabsf(L_direct.x) + fabsf(L_direct.y) + fabsf(L_direct.z);
if(sum_direct > clamp_direct) {
scale = clamp_direct/sum_direct;
L_direct *= scale;
L->direct_diffuse *= scale;
L->direct_glossy *= scale;
L->direct_transmission *= scale;
L->direct_subsurface *= scale;
L->direct_scatter *= scale;
L->emission *= scale;
L->background *= scale;
}
/* Indirect */
float sum_indirect = fabsf(L_indirect.x) + fabsf(L_indirect.y) + fabsf(L_indirect.z);
if(sum_indirect > clamp_indirect) {
scale = clamp_indirect/sum_indirect;
L_indirect *= scale;
L->indirect_diffuse *= scale;
L->indirect_glossy *= scale;
L->indirect_transmission *= scale;
L->indirect_subsurface *= scale;
L->indirect_scatter *= scale;
}
/* Sum again, after clamping */
L_sum = L_direct + L_indirect;
}
#endif
return L_sum;
}
/* No Light Passes */
else
#endif
{
L_sum = L->emission;
}
/* Reject invalid value */
float sum = fabsf((L_sum).x) + fabsf((L_sum).y) + fabsf((L_sum).z);
if(!isfinite(sum)) {
kernel_assert(!"Non-finite final sum in path_radiance_clamp_and_sum!");
L_sum = make_float3(0.0f, 0.0f, 0.0f);
}
return L_sum;
}
ccl_device_inline void path_radiance_accum_sample(PathRadiance *L, PathRadiance *L_sample, int num_samples)
{
float fac = 1.0f/num_samples;
#ifdef __PASSES__
L->direct_diffuse += L_sample->direct_diffuse*fac;
L->direct_glossy += L_sample->direct_glossy*fac;
L->direct_transmission += L_sample->direct_transmission*fac;
L->direct_subsurface += L_sample->direct_subsurface*fac;
L->direct_scatter += L_sample->direct_scatter*fac;
L->indirect_diffuse += L_sample->indirect_diffuse*fac;
L->indirect_glossy += L_sample->indirect_glossy*fac;
L->indirect_transmission += L_sample->indirect_transmission*fac;
L->indirect_subsurface += L_sample->indirect_subsurface*fac;
L->indirect_scatter += L_sample->indirect_scatter*fac;
L->background += L_sample->background*fac;
L->ao += L_sample->ao*fac;
L->shadow += L_sample->shadow*fac;
L->mist += L_sample->mist*fac;
#endif
L->emission += L_sample->emission * fac;
}
CCL_NAMESPACE_END