lunny/qmk_firmware-mirror
1
0
Fork 0
mirror of https://github.com/qmk/qmk_firmware synced 2024-12-22 08:26:21 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add Cerberus to QMK (#24226)

Browse Source 
* Add Cerberus to QMK

* Update readme to add hotswap callouts

* Update readme formatting

* Use format json to update keyboard.json formatting

* Split Cerberus HS and Solderable into separate folders

* Update JSON formatting

* make solderable keymaps a bit more useful

* Backlight fix on solderable

* Update keyboards/cannonkeys/cerberus/hotswap/keyboard.json

Co-authored-by: jack <jack@pngu.org>

* Remove cerberus VIA keymaps

* Apply suggestions from code review

Change some whitespace

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Add RGB control keycodes to cerberus keymap

* Add backlight controls to default keymap on solderable version

* Update keyboards/cannonkeys/cerberus/readme.md

---------

Co-authored-by: jack <jack@pngu.org>
Co-authored-by: Drashna Jaelre <drashna@live.com>
This commit is contained in:
Andrew Kannan 2024-12-05 13:18:25 -05:00 committed by GitHub
parent 3c324cb5e6
commit d76f7bfac3
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
15 changed files with 1233 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
keyboards/cannonkeys/cerberus/config.h Normal file
View File

@ -0,0 +1,9 @@
// Copyright 2024 Andrew Kannan
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define WS2812_SPI_DRIVER SPID2
#define WS2812_SPI_MOSI_PAL_MODE 0
#define WS2812_SPI_SCK_PAL_MODE 0
#define WS2812_SPI_SCK_PIN B13

9
keyboards/cannonkeys/cerberus/halconf.h Normal file
View File

@ -0,0 +1,9 @@
// Copyright 2024 Andrew Kannan
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define HAL_USE_SPI TRUE
#include_next <halconf.h>

311
keyboards/cannonkeys/cerberus/hotswap/keyboard.json Normal file
View File

File diff suppressed because it is too large Load Diff

26
keyboards/cannonkeys/cerberus/hotswap/keymaps/default/keymap.c Normal file
View File

@ -0,0 +1,26 @@
// Copyright 2024 Andrew Kannan
// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
enum layer_names {
_BASE,
_FN1,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_all(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(1), KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LGUI, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_FN1] = LAYOUT_all(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_PSCR, KC_SCRL, KC_PAUS,
UG_TOGG, UG_HUEU, UG_SATU, UG_VALU, UG_SPDU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, UG_HUED, UG_SATD, UG_VALD, UG_SPDD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, UG_PREV, UG_NEXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};

2
keyboards/cannonkeys/cerberus/hotswap/rules.mk Normal file
View File

@ -0,0 +1,2 @@
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF

50
keyboards/cannonkeys/cerberus/info.json Normal file
View File

@ -0,0 +1,50 @@
{
"manufacturer": "CannonKeys",
"maintainer": "awkannan",
"bootloader": "stm32-dfu",
"diode_direction": "COL2ROW",
"features": {
"bootmagic": true,
"command": true,
"console": true,
"extrakey": true,
"mousekey": true,
"nkro": true,
"rgblight": true
},
"matrix_pins": {
"cols": ["B0", "C15", "C14", "A7", "A5", "C13", "A4", "A2", "A1", "A0", "B9", "B8", "B7", "A3", "B6", "B4", "B3", "A15"],
"rows": ["B11", "B10", "B2", "F0", "B5"]
},
"processor": "STM32F072",
"qmk": {
"locking": {
"enabled": true,
"resync": true
}
},
"rgblight": {
"animations": {
"alternating": true,
"breathing": true,
"christmas": true,
"knight": true,
"rainbow_mood": true,
"rainbow_swirl": true,
"rgb_test": true,
"snake": true,
"static_gradient": true,
"twinkle": true
},
"led_count": 4
},
"url": "https://cannonkeys.com",
"usb": {
"device_version": "0.0.1",
"vid": "0xCA04"
},
"ws2812": {
"driver": "spi",
"pin": "B15"
}
}

9
keyboards/cannonkeys/cerberus/mcuconf.h Normal file
View File

@ -0,0 +1,9 @@
// Copyright 2024 Andrew Kannan
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include_next <mcuconf.h>
#undef STM32_SPI_USE_SPI2
#define STM32_SPI_USE_SPI2 TRUE

28
keyboards/cannonkeys/cerberus/readme.md Normal file
View File

@ -0,0 +1,28 @@
# Cerberus Keyboard by CannonKeys
This folder contains firmware for both the Solderable and Hotswap version of Cerberus
The hotswap PCB does not support per-key LEDs and has reduced layout support (no ISO)
* Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
* Hardware Supported: STM32F072CBT6
Make example for this keyboard (after setting up your build environment):
make cannonkeys/cerberus/hotswap:default
make cannonkeys/cerberus/solderable:default
Flashing example for this keyboard:
make cannonkeys/cerberus/hotswap:default:flash
make cannonkeys/cerberus/solderable:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Toggle the switch on the back of the pcb to "1" and briefly press the button on the back of the PCB
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

8
keyboards/cannonkeys/cerberus/solderable/config.h Normal file
View File

@ -0,0 +1,8 @@
// Copyright 2024 Andrew Kannan
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1

10
keyboards/cannonkeys/cerberus/solderable/halconf.h Normal file
View File

@ -0,0 +1,10 @@
// Copyright 2024 Andrew Kannan
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define HAL_USE_PWM TRUE
#include_next <halconf.h>

711
keyboards/cannonkeys/cerberus/solderable/keyboard.json Normal file
View File

File diff suppressed because it is too large Load Diff

25
keyboards/cannonkeys/cerberus/solderable/keymaps/default/keymap.c Normal file
View File

@ -0,0 +1,25 @@
// Copyright 2024 Andrew Kannan
// SPDX-License-Identifier: GPL-2.0-or-later
#include QMK_KEYBOARD_H
enum layer_names {
_BASE,
_FN1,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_all(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(1), KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LGUI, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_FN1] = LAYOUT_all(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_PSCR, KC_SCRL, KC_PAUS,
UG_TOGG, UG_HUEU, UG_SATU, UG_VALU, UG_SPDU, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, UG_HUED, UG_SATD, UG_VALD, UG_SPDD, BL_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, UG_PREV, UG_NEXT, KC_TRNS, BL_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
QK_BOOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
};

24
keyboards/cannonkeys/cerberus/solderable/matrix_diagram.md Normal file
View File

@ -0,0 +1,24 @@
# Matrix Diagram for Cerberus
```
┌───────┐
2u Backspace │0D │
└───────┘
┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┐
│00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ │0F │0G │0H │
├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ├───┼───┼───┤ ┌─────┐
│10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1E │ │1F │1G │1H │ │ │
├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ┌──┴┐2E │
│20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2E │ │2C │ │
├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌───┐ └───┴────┘
│30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3E │ │3G │ ISO Enter
├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤ ┌───┼───┼───┐
│40 │41 │42 │45 │4A │4B │4C │4E │ │4F │4G │4H │
└────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘
┌────────┐ ┌──────────┐
│30 │ 2.25u LShift 2.75u RShift │3C │
└────────┘ └──────────┘
┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐
│40 │41 │42 │45 │4B │4C │4E │ Tsangan/WKL
└─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
```

9
keyboards/cannonkeys/cerberus/solderable/mcuconf.h Normal file
View File

@ -0,0 +1,9 @@
// Copyright 2024 Andrew Kannan
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include_next <mcuconf.h>
#undef STM32_PWM_USE_TIM3
#define STM32_PWM_USE_TIM3 TRUE

2
keyboards/cannonkeys/cerberus/solderable/rules.mk Normal file
View File

@ -0,0 +1,2 @@
# Wildcard to allow APM32 MCU
DFU_SUFFIX_ARGS = -v FFFF -p FFFF