a69933782d
Add RX100 Renesas compiler port layer.
2013-04-16 15:59:21 +00:00
74290b4425
Add RX100 IAR port layer.
2013-04-16 15:58:46 +00:00
a0056e8fd3
Add RX100 GCC port layer.
2013-04-16 15:58:14 +00:00
9a15f50b00
Add memory barrier instructions to Tasking CM4F port.
2013-04-16 15:50:17 +00:00
7132e88685
Add memory barrier instructions to the RVDS CM3 ports.
2013-04-16 15:30:43 +00:00
895ee2bb3e
Add barrier instructions to IAR CM3 ports.
2013-04-16 14:56:49 +00:00
d135e45676
Replace the read back of the software interrupt register with barrier instructions (CCS/RM48/TMS570).
2013-04-16 14:17:35 +00:00
0527099b51
Add barrier instructions to the GCC CM3 ports.
2013-04-16 14:16:30 +00:00
af023e8bf1
Remove infinite loop from task delete function.
2013-04-16 10:25:33 +00:00
6d20e2b5cd
Add barrier instructions to GCC CM3/4 code.
2013-04-07 19:43:52 +00:00
3762630f27
RL78/IAR port - Allow the end user to define their own tick interrupt configuration by defining configSETUP_TIMER_INTERRUPT().
2013-03-25 17:00:13 +00:00
a9b8f0ca69
Minor mods common files to fix warnings generated by Renesas compiler.
...
Correct the header comments in het.c and het.h (RM48/TMS570 demo) which were corrupt.
Correct version numbers in RX63N Renesas compiler demo.
Ensure stacks set up for tasks in the RX200 port layer end on 8 byte boundaries (was 4, which didn't matter but didn't match the definition).
Replaced unqualified (unsigned) in calls to standard functions with (size_t).
2013-03-25 16:30:42 +00:00
caf1fbc899
Ensure IAR RL port layer works on devices using two different naming conventions for the interval timer registers.
2013-03-18 16:40:47 +00:00
8c66fdbb8c
Updated IAR RL78 port layer.
2013-03-17 16:54:17 +00:00
17bba16fa6
Added YRDKRL78G14 build configuration to the IAR RL78 demo.
2013-02-24 19:48:26 +00:00
a5d0e3f0c1
Prepare for V7.4.0 release.
2013-02-19 18:36:58 +00:00
902f9e1a58
Update PIC32 demo application to remove reliance on PLIB functions.
...
Update the default low power implementation in all the Cortex-M port layers to add a small critical section.
2013-02-18 16:41:11 +00:00
c519ba094d
Correct spelling of xSuspendedTaskList in eTaskConfirmSleepModeStatus().
2013-02-18 11:28:56 +00:00
dcc90bb6d9
Add default definition for configUSE_QUEUE_SETS.
...
Add eTaskConfirmSleepModeStatus() (not yet tested).
Only call prvQueueUnregisterQueue() when a queue or semaphore is deleted if configQUEUE_REGISTRY_SIZE > 0.
Back out change that checks the configUSE_PORT_OPTMISED_TASK_SELECTION value before uxPriorityUsedOnEntry is set in vTaskPrioritySet as it generated more warnings (with other compilers) than it fixed.
2013-02-18 11:20:29 +00:00
a7eae6bed3
Added more files to the Rowley and IAR LM3S demos to test building the newer files and queue sets.
...
Made queue function prototypes consistent so xQueueHandle parameters are always xQueue, and xQUEUE * parameters pxQueue.
Likewise make the task API using px for pointers to TCBs, and just x for task handles.
Heap_x functions now automatically align the start of the heap without using the portDOUBLE union member.
Queue.c now includes queue.h.
2013-02-12 17:35:43 +00:00
b671bf368a
Improve QueueSet.c test coverage by reading the queue set from an ISR to force paths through the queue locking and unlocking.
...
Add the FreeRTOS+Trace recorder into the Win32 MSVC demo.
Added more functions, including the queue set functions, to the MPU port.
2013-02-12 10:09:36 +00:00
96218c34a1
Fix a few compiler warnings when compiling the QueueSet.c test code with GCC.
2013-02-08 17:05:42 +00:00
232a5b3433
Continue working on queue set implementation and testing.
2013-02-08 15:50:14 +00:00
4e5090e061
Next revision of queue set implementation.
...
Make conditional compilation syntax and commenting consistent.
Add common demo tasks to demonstrate queue sets.
2013-02-07 15:10:25 +00:00
b5b518571e
remove the additional line added to the MPU port.c as the original code was correct. Instead remove the alignment assert by adding #define portALIGNMENT_ASSERT_pxCurrentTCB ( void )
...
to the portmacor.h file.
2013-01-31 15:27:00 +00:00
ac78adae4b
Added INCLUDE_xSemaphoreGetMutexHolder() default.
...
Changed eTaskStateGet() to eTaskGetState() and added #define to ensure backward compatibility.
Added configEXPECTED_IDLE_TIME_BEFORE_SLEEP definition - was previously hard coded to 2.
Slight change to the default CM3 tickless sleep function to allow the idle time to be set to zero in the pre-sleep processing macro.
Changed stack alignment for the FreeRTOS-MPU port to ensure it didn't trigger the assert() in the generic create function.
2013-01-31 14:18:03 +00:00
4e7b460eaf
Replace the CLZ function with a CLZ intrinsic in the Cortex-R4 port layer.
...
Add EDS support in the PIC24 port layer.
Remove unnecessary EHB instructions from PIC32 port.
In the PIC32 port assembly code, replace the &= code with a single ins instruction.
2013-01-23 16:06:45 +00:00
b5cf299df1
Make changes necessary to allow the latest StateViewer Eclipse plug-in obtain the run time stats information.
2012-12-31 11:09:14 +00:00
2e24f1b789
Move the call that sets xTimeNow inside the loop that drains the timer queue to ensure higher priority tasks that pre-empt the timer daemon cannot post messages that appear to be in the future to the daemon task.
2012-11-18 09:13:39 +00:00
0d421482d8
Default configUSE_TICKLESS_IDLE to 0 when it is not defined.
...
Move location of traceTASK_CREATE() macro call.
Remove obsolete handling of trmCOMMAND_PROCESS_TIMER_OVERFLOW as the command was never used in release versions.
2012-11-17 19:23:30 +00:00
96f93690ce
Add warning suppression to IAR header.
2012-10-31 13:30:44 +00:00
ba686260ca
Make CM3/4 tick configuration a weak function to allow application writers to use an alternative tick source.
2012-10-29 15:56:26 +00:00
9fe5156b53
Work around compiler bug in CCS5 by replacing the _call_swi() function with a #pragma SWI_ALIAS.
2012-10-29 11:38:19 +00:00
f5c52bdb1d
Re-jig some of the new functions to correctly assign them public or private linkage, and remove some functions that were added in but never used.
2012-10-22 16:40:45 +00:00
f06a945444
Prepare for V7.3.0 release.
2012-10-16 12:17:47 +00:00
f446f77fd4
Make the timer used for the PIC32 port layer user configurable.
2012-10-16 09:48:45 +00:00
e03ab659f3
Add tickless idle support in Cortex-M ports.
...
Change CCS R4 directory name.
2012-10-16 07:55:40 +00:00
05c17e7e6d
Remove whitespace only.
2012-10-10 09:53:44 +00:00
c403e974ee
Update PIC32 port to make use of configUSE_PORT_OPTIMISED_TASK_SELECTION.
...
Make small modification in GCC CM3 port when configUSE_PORT_OPTIMISED_TASK_SELECTION is set to 1 to remove compiler warning.
2012-09-25 18:18:37 +00:00
87f663a461
Correct #if( configMAX_PRIORITIES >= 32 ) check performed when configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 to instead be #if( configMAX_PRIORITIES > 32 ).
2012-09-24 12:10:08 +00:00
42a11edef8
Replace the need for taskCHECK_READY_LIST() by instead making vListRemove() return the number of items that remain in the list once the list item has been removed.
2012-09-24 12:05:35 +00:00
18a4b00a18
Rename listLIST_ITEM_CONTAINED to listLIST_ITEM_CONTAINER.
2012-09-24 11:23:14 +00:00
92f1699055
Added Cortex-M optimised code to the IAR, GCC and Keil Cortex-M port layers.
...
Tested and updated a few Cortex-M projects to use configUSE_PORT_OPTIMISED_TASK_SELECTION set to 1.
2012-09-24 11:01:17 +00:00
670d172cfc
Introduced configUSE_PORT_OPTIMISED_TASK_SELECTION, and updated the MSVC simulator port as the first implementation.
2012-09-23 14:35:12 +00:00
8ef7f03536
Add eTaskStateGet() to FreeRTOS-MPU.
2012-09-23 09:35:53 +00:00
eb1f7bc166
Added eTaskStateGet().
...
Added default value for INCLUDE_eTaskStateGet.
2012-09-22 20:59:27 +00:00
48a307ff5f
Allow mutex type semaphores to be given from an interrupt (not a normal thing to do - use a binary semaphore!).
...
Allow FreeRTOS+CLI commands to have spaces at the end without it being taken as a parameter.
2012-09-05 14:02:16 +00:00
0c7af1c2d3
Put comments in the code that give a reference to people who think that setting BASE_PRI to zero is the wrong thing to to in an ISR.
2012-08-14 13:04:22 +00:00
e0bab5981a
Prepare for V7.2.0 release.
2012-08-14 12:14:48 +00:00
73ad4387e2
Remove the remnants of the legacy trace functionality (since replaced with FreeRTOS+Trace).
...
Replaced the #error that traps configMAX_SYSCALL_INTERRUPT_PRIORITY being set to 0 with a configASSERT() for GCC Cortex-M3/4 ports as the #error does not work if configMAX_SYSCALL_INTERRUPT_PRIORITY includes any casting. Not a problem for other compilers as they cannot have casting anyway as that would break the assembly code.
2012-08-12 17:05:23 +00:00
