blender/source/nan_compile.mk

475 lines
13 KiB
Makefile
Raw Normal View History

# -*- mode: gnumakefile; tab-width: 8; indent-tabs-mode: t; -*-
# vim: tabstop=8
2002-10-12 11:37:38 +00:00
#
# $Id$
#
# ***** BEGIN GPL LICENSE BLOCK *****
2002-10-12 11:37:38 +00:00
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
2002-10-12 11:37:38 +00:00
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
# All rights reserved.
#
# The Original Code is: all of this file.
#
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
# Contributor(s): GSR, Stefan Gartner
2002-10-12 11:37:38 +00:00
#
# ***** END GPL LICENSE BLOCK *****
2002-10-12 11:37:38 +00:00
#
# Compile and archive
include nan_definitions.mk
CPPFLAGS ?= $(NAN_CPPFLAGS)
# common parts ---------------------------------------------------
# Uncomment next lines to enable integrated game engine
ifneq ($(NAN_NO_KETSJI), true)
CFLAGS += -DGAMEBLENDER=1
ifeq ($(NAN_USE_BULLET), true)
CFLAGS += -DUSE_BULLET
CCFLAGS += -DUSE_BULLET
endif
else
CPPFLAGS += -DNO_KETSJI
endif
ifeq ($(BF_PROFILE), true)
CFLAGS += -pg
CCFLAGS += -pg
endif
ifeq ($(WITH_BF_OPENMP), true)
CFLAGS += -fopenmp
CCFLAGS += -fopenmp
endif
2002-10-12 11:37:38 +00:00
ifdef NAN_DEBUG
CFLAGS += $(NAN_DEBUG)
CCFLAGS += $(NAN_DEBUG)
endif
REL_CFLAGS += -DNDEBUG
REL_CCFLAGS += -DNDEBUG
DBG_CFLAGS += -g
DBG_CCFLAGS += -g
2002-10-12 11:37:38 +00:00
# OS dependent parts ---------------------------------------------------
ifeq ($(OS),darwin)
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
CC ?= gcc
CCC ?= g++
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
ifeq ($(MACOSX_DEPLOYMENT_TARGET), 10.4)
CC = gcc-4.0
CCC = g++-4.0
else
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
ifeq ($(MACOSX_DEPLOYMENT_TARGET), 10.5)
CC = gcc-4.2
CCC = g++-4.2
endif
endif
ifeq ($(CPU),powerpc)
CFLAGS += -pipe -fPIC -ffast-math -mcpu=7450 -mtune=G5 -funsigned-char -fno-strict-aliasing
2009-12-21 10:40:55 +00:00
CCFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
else
CFLAGS += -pipe -fPIC -ffast-math -funsigned-char
CCFLAGS += -pipe -fPIC -funsigned-char
endif
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
CFLAGS += -arch $(MACOSX_ARCHITECTURE) #-isysroot $(MACOSX_SDK) -mmacosx-version-min=$(MACOSX_MIN_VERS)
CCFLAGS += -arch $(MACOSX_ARCHITECTURE) #-isysroot $(MACOSX_SDK) -mmacosx-version-min=$(MACOSX_MIN_VERS)
ifeq ($(MACOSX_ARCHITECTURE), $(findstring $(MACOSX_ARCHITECTURE), "i386 x86_64"))
Drag and drop 2.5 integration! Finally, slashdot regulars can use Blender too now! :) ** Drag works as follows: - drag-able items are defined by the standard interface ui toolkit - each button can get this feature, via uiButSetDragXXX(but, ...). There are calls to define drag-able images, ID blocks, RNA paths, file paths, and so on. By default you drag an icon, exceptionally an ImBuf - Drag items are registered centrally in the WM, it allows more drag items simultaneous too, but not implemented ** Drop works as follows: - On mouse release, and if drag items exist in the WM, it converts the mouse event to an EVT_DROP type. This event then gets the full drag info as customdata - drop regions are defined with WM_dropbox_add(), similar to keymaps you can make a "drop map" this way, which become 'drop map handlers' in the queues. - next to that the UI kit handles some common button types (like accepting ID or names) to be catching a drop event too. - Every "drop box" has two callbacks: - poll() = check if the event drag data is relevant for this box - copy() = fill in custom properties in the dropbox to initialize an operator - The dropbox handler then calls its standard Operator with its dropbox properties. ** Currently implemented Drag items: - ID icons in browse buttons - ID icons in context menu of properties region - ID icons in outliner and rna viewer - FileBrowser icons - FileBrowser preview images Drag-able icons are subtly visualized by making them brighter a bit on mouse-over. In case the icon is a button or UI element too (most cases), the drag-able feature will make the item react to mouse-release instead of mouse-press. Drop options: - UI buttons: ID and text buttons (paste name) - View3d: Object ID drop copies object - View3d: Material ID drop assigns to object under cursor - View3d: Image ID drop assigns to object UV texture under cursor - Sequencer: Path drop will add either Image or Movie strip - Image window: Path drop will open image ** Drag and drop Notes: - Dropping into another Blender window (from same application) works too. I've added code that passes on mousemoves and clicks to other windows, without activating them though. This does make using multi-window Blender a bit friendler. - Dropping a file path to an image, is not the same as dropping an Image ID... keep this in mind. Sequencer for example wants paths to be dropped, textures in 3d window wants an Image ID. - Although drop boxes could be defined via Python, I suggest they're part of the UI and editor design (= how we want an editor to work), and not default offered configurable like keymaps. - At the moment only one item can be dragged at a time. This is for several reasons.... For one, Blender doesn't have a well defined uniform way to define "what is selected" (files, outliner items, etc). Secondly there's potential conflicts on what todo when you drop mixed drag sets on spots. All undefined stuff... nice for later. - Example to bypass the above: a collection of images that form a strip, should be represented in filewindow as a single sequence anyway. This then will fit well and gets handled neatly by design. - Another option to check is to allow multiple options per drop... it could show the operator as a sort of menu, allowing arrow or scrollwheel to choose. For time being I'd prefer to try to design a singular drop though, just offer only one drop action per data type on given spots. - What does work already, but a tad slow, is to use a function that detects an object (type) under cursor, so a drag item's option can be further refined (like drop object on object = parent). (disabled) ** More notes - Added saving for Region layouts (like split points for toolbar) - Label buttons now handle mouse over - File list: added full path entry for drop feature. - Filesel bugfix: wm_operator_exec() got called there and fully handled, while WM event code tried same. Added new OPERATOR_HANDLED flag for this. Maybe python needs it too? - Cocoa: added window move event, so multi-win setups work OK (didnt save). - Interface_handlers.c: removed win->active - Severe area copy bug: area handlers were not set to NULL - Filesel bugfix: next/prev folder list was not copied on area copies ** Leftover todos - Cocoa windows seem to hang on cases still... needs check - Cocoa 'draw overlap' swap doesn't work - Cocoa window loses focus permanently on using Spotlight (for these reasons, makefile building has Carbon as default atm) - ListView templates in UI cannot become dragged yet, needs review... it consists of two overlapping UI elements, preventing handling icon clicks. - There's already Ghost library code to handle dropping from OS into Blender window. I've noticed this code is unfinished for Macs, but seems to be complete for Windows. Needs test... currently, an external drop event will print in console when succesfully delivered to Blender's WM.
2010-01-26 18:18:21 +00:00
REL_CFLAGS += -ftree-vectorize -msse -msse2 -msse3
REL_CCFLAGS += -ftree-vectorize -msse -msse2 -msse3
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
endif
ifeq ($(MACOSX_ARCHITECTURE), x86_64)
REL_CFLAGS += -mssse3
REL_CCFLAGS += -mssse3
endif
CPPFLAGS += -D_THREAD_SAFE -fpascal-strings
ifeq ($(WITH_COCOA), true)
CPPFLAGS += -DGHOST_COCOA
endif
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
ifeq ($(USE_QTKIT), true)
CPPFLAGS += -DUSE_QTKIT
endif
NAN_DEPEND = true
2002-10-12 11:37:38 +00:00
OPENGL_HEADERS = /System/Library/Frameworks/OpenGL.framework
AR = ar
ARFLAGS = ruv
RANLIB = ranlib
ARFLAGSQUIET = ru
endif
ifeq ($(OS),freebsd)
CC ?= gcc
CCC ?= g++
2002-10-12 11:37:38 +00:00
JAVAC = javac
JAVAH = javah
CFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
CCFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
REL_CFLAGS += -O2
REL_CCFLAGS += -O2
CPPFLAGS += -D_THREAD_SAFE
NAN_DEPEND = true
2002-10-12 11:37:38 +00:00
OPENGL_HEADERS = /usr/X11R6/include
JAVA_HEADERS = /usr/local/jdk1.3.1/include
JAVA_SYSTEM_HEADERS = /usr/local/jdk1.3.1/include/freebsd
AR = ar
2002-10-12 11:37:38 +00:00
ARFLAGS = ruv
ARFLAGSQUIET = ru
endif
ifeq ($(OS),irix)
ifeq ($(IRIX_USE_GCC),true)
CC ?= gcc
CCC ?= g++
CFLAGS += -fPIC -funsigned-char -fno-strict-aliasing -mabi=n32 -mips4
CCFLAGS += -fPIC -fpermissive -funsigned-char -fno-strict-aliasing -mabi=n32 -mips4
REL_CFLAGS += -O2
REL_CCFLAGS += -O2
DBG_CFLAGS += -g3 -gdwarf-2 -ggdb
DBG_CCFLAGS += -g3 -gdwarf-2 -ggdb
else
CC ?= cc
CCC ?= CC
CFLAGS += -n32 -mips3 -Xcpluscomm
CCFLAGS += -n32 -mips3 -Xcpluscomm -LANG:std
ifdef MIPS73_ISOHEADERS
CCFLAGS += -LANG:libc_in_namespace_std=off -I$(MIPS73_ISOHEADERS)
else
CCFLAGS += -LANG:libc_in_namespace_std=off
endif
REL_CFLAGS += -n32 -mips3 -O2 -OPT:Olimit=0
REL_CCFLAGS += -n32 -mips3 -O2 -OPT:Olimit=0
endif
2002-10-12 11:37:38 +00:00
OPENGL_HEADERS = /usr/include
NAN_DEPEND = true
AR = CC
ARFLAGS = -ar -o
ARFLAGSQUIET = -ar -o
2002-10-12 11:37:38 +00:00
endif
ifeq ($(OS),linux)
CC ?= gcc
CCC ?= g++
# CFLAGS += -pipe
# CCFLAGS += -pipe
CFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
CCFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
REL_CFLAGS += -O2
REL_CCFLAGS += -O2
2002-10-12 11:37:38 +00:00
NAN_DEPEND = true
ifeq ($(CPU),alpha)
CFLAGS += -mieee
endif
OPENGL_HEADERS = /usr/X11R6/include
AR = ar
ARFLAGS = ruv
ARFLAGSQUIET = ru
endif
ifeq ($(OS),openbsd)
CC ?= gcc
CCC ?= g++
CFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
CCFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
REL_CFLAGS += -O2
2002-10-12 11:37:38 +00:00
REL_CCFLAGS += -O2
NAN_DEPEND = true
CPPFLAGS += -D__FreeBSD__
OPENGL_HEADERS = /usr/X11R6/include
AR = ar
ARFLAGS = ruv
ARFLAGSQUIET = ru
endif
ifeq ($(OS),solaris)
# Adding gcc flag to $CC is not good, however if its not there makesdna wont build - Campbell
ifeq (x86_64, $(findstring x86_64, $(CPU)))
CC ?= gcc -m64
CCC ?= g++ -m64
else
CC ?= gcc
CCC ?= g++
#CC ?= cc
#CCC ?= CC
endif
2002-10-12 11:37:38 +00:00
JAVAC = javac
JAVAH = javah
CFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
CCFLAGS += -pipe -fPIC -funsigned-char -fno-strict-aliasing
# CFLAGS += "-fast -xdepend -xarch=v8plus -xO3 -xlibmil -KPIC -DPIC -xchar=unsigned"
# CCFLAGS += "-fast -xdepend -xarch=v8plus -xO3 -xlibmil -xlibmopt -features=tmplife -norunpath -KPIC -DPIC -xchar=unsigned"
# Note, you might still want to compile a 32 bit binary if you have a 64bit system. if so remove the following lines
# ifeq ($(findstring 64,$(CPU)), 64)
# CFLAGS += -m64
# CCFLAGS += -m64
# endif
REL_CFLAGS += -O2
REL_CCFLAGS += -O2
2002-10-12 11:37:38 +00:00
NAN_DEPEND = true
# ifeq ($(CPU),sparc)
ifeq ($(findstring sparc,$(CPU)), sparc)
OPENGL_HEADERS = /usr/openwin/share/include
CPPFLAGS += -DSUN_OGL_NO_VERTEX_MACROS
JAVA_HEADERS = /usr/java/include
JAVA_SYSTEM_HEADERS = /usr/java/include/solaris
else
# OPENGL_HEADERS = /usr/X11/include/mesa
OPENGL_HEADERS = /usr/X11/include/
endif
2002-10-12 11:37:38 +00:00
AR = ar
ARFLAGS = ruv
ARFLAGSQUIET = ru
endif
ifeq ($(OS),windows)
ifeq ($(FREE_WINDOWS),true)
CC ?= gcc
CCC ?= g++
CFLAGS += -pipe -mno-cygwin -mwindows -funsigned-char -fno-strict-aliasing
CCFLAGS += -pipe -mno-cygwin -mwindows -funsigned-char -fno-strict-aliasing
CPPFLAGS += -DFREE_WINDOWS
REL_CFLAGS += -O2
REL_CCFLAGS += -O2
NAN_DEPEND = true
#OPENGL_HEADERS = /usr/include/w32api
OPENGL_HEADERS = ./
AR = ar
ARFLAGS = ruv
ARFLAGSQUIET = ru
WINRC = $(wildcard *.rc)
RANLIB = ranlib
else
CC ?= $(SRCHOME)/tools/cygwin/cl_wrapper.pl
CCC ?= $(SRCHOME)/tools/cygwin/cl_wrapper.pl
JAVAC = $(SRCHOME)/tools/cygwin/java_wrapper.pl -c
JAVAH = $(SRCHOME)/tools/cygwin/java_wrapper.pl -h
REL_CFLAGS += /O2
REL_CCFLAGS += /O2 -GX
DBG_CFLAGS += /Fd$(DIR)/debug/
DBG_CCFLAGS += /Fd$(DIR)/debug/
CFLAGS += /MT
CCFLAGS += /MT
NAN_DEPEND = true
OPENGL_HEADERS = .
CPPFLAGS += -DWIN32 -D_WIN32 -D__WIN32
CPPFLAGS += -D_M_IX86
CPPFLAGS += -I"/cygdrive/c/Program Files/Microsoft Visual Studio/VC98/include"
JAVA_HEADERS = /cygdrive/c/j2sdk1.4.0-beta3/include
JAVA_SYSTEM_HEADERS = /cygdrive/c/j2sdk1.4.0-beta3/include/win32
CPP = $(SRCHOME)/tools/cygwin/cl_wrapper.pl
AR = ar
ARFLAGS = ruv
ARFLAGSQUIET = ru
WINRC = $(wildcard *.rc)
endif
2002-10-12 11:37:38 +00:00
endif
ifeq (debug, $(findstring debug, $(MAKECMDGOALS)))
export DEBUG_DIR=debug/
endif
ifneq (x$(DEBUG_DIR), x)
CFLAGS +=$(DBG_CFLAGS)
CCFLAGS+=$(DBG_CCFLAGS)
else
CFLAGS +=$(REL_CFLAGS)
CCFLAGS+=$(REL_CCFLAGS)
endif
# Note: include nan_warn's LEVEL_*_WARNINGS after CC/OS have been set.
include nan_warn.mk
# compile rules
default: all
$(DIR)/$(DEBUG_DIR)%.o: %.c
2002-10-12 11:37:38 +00:00
ifdef NAN_DEPEND
@set -e; $(CC) -M $(CPPFLAGS) $< 2>/dev/null \
| sed 's@\($*\)\.o[ :]*@$(DIR)/$(DEBUG_DIR)\1.o : @g' \
> $(DIR)/$(DEBUG_DIR)$*.d; \
[ -s $(DIR)/$(DEBUG_DIR)$*.d ] || $(RM) $(DIR)/$(DEBUG_DIR)$*.d
endif
ifdef NAN_QUIET
@echo " -- $< -- "
@$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
else
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
endif
$(DIR)/$(DEBUG_DIR)%.o: %.cpp
2002-10-12 11:37:38 +00:00
ifdef NAN_DEPEND
@set -e; $(CCC) -M $(CPPFLAGS) $< 2>/dev/null \
| sed 's@\($*\)\.o[ :]*@$(DIR)/$(DEBUG_DIR)\1.o : @g' \
> $(DIR)/$(DEBUG_DIR)$*.d; \
[ -s $(DIR)/$(DEBUG_DIR)$*.d ] || $(RM) $(DIR)/$(DEBUG_DIR)$*.d
endif
ifdef NAN_QUIET
@echo " -- $< -- "
@$(CCC) -c $(CCFLAGS) $(CPPFLAGS) $< -o $@
else
$(CCC) -c $(CCFLAGS) $(CPPFLAGS) $< -o $@
endif
$(DIR)/$(DEBUG_DIR)%.o: %.mm
ifdef NAN_DEPEND
@set -e; $(CC) -M $(CPPFLAGS) $< 2>/dev/null \
| sed 's@\($*\)\.o[ :]*@$(DIR)/$(DEBUG_DIR)\1.o : @g' \
> $(DIR)/$(DEBUG_DIR)$*.d; \
[ -s $(DIR)/$(DEBUG_DIR)$*.d ] || $(RM) $(DIR)/$(DEBUG_DIR)$*.d
endif
ifdef NAN_QUIET
@echo " -- $< -- "
@$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
else
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
endif
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
$(DIR)/$(DEBUG_DIR)%.o: %.m
ifdef NAN_DEPEND
@set -e; $(CC) -M $(CPPFLAGS) $< 2>/dev/null \
| sed 's@\($*\)\.o[ :]*@$(DIR)/$(DEBUG_DIR)\1.o : @g' \
> $(DIR)/$(DEBUG_DIR)$*.d; \
[ -s $(DIR)/$(DEBUG_DIR)$*.d ] || $(RM) $(DIR)/$(DEBUG_DIR)$*.d
endif
ifdef NAN_QUIET
@echo " -- $< -- "
@$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
else
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
endif
$(DIR)/$(DEBUG_DIR)%.res: %.rc
ifeq ($(FREE_WINDOWS),true)
windres $< -O coff -o $@
else
2002-10-12 11:37:38 +00:00
$(SRCHOME)/tools/cygwin/cl_wrapper.pl - rc /fo$@ $<
endif
2002-10-12 11:37:38 +00:00
$(DIR)/$(DEBUG_DIR)%.class: %.java
2002-10-12 11:37:38 +00:00
ifdef JARS
$(JAVAC) -verbose -g -deprecation -sourcepath . -classpath "$(JARS)" -d $(DIR)/$(DEBUG_DIR) $<
else
$(JAVAC) -verbose -g -deprecation -d $(DIR)/$(DEBUG_DIR) $<
endif
$(DIR)/$(DEBUG_DIR)%.h: $(DIR)/$(DEBUG_DIR)%.class
2002-10-12 11:37:38 +00:00
$(JAVAH) -classpath $(DIR)/$(DEBUG_DIR) -d $(DIR)/$(DEBUG_DIR) -jni $*
%.h:
@echo "WARNING: Fake header creation rule used, dependencies will be remade"
CSRCS ?= $(wildcard *.c)
CCSRCS ?= $(wildcard *.cpp)
JSRCS ?= $(wildcard *.java)
ifdef NAN_DEPEND
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
-include $(CSRCS:%.c=$(DIR)/$(DEBUG_DIR)%.d) $(CCSRCS:%.cpp=$(DIR)/$(DEBUG_DIR)%.d) $(OCCSRCS:$.mm=$(DIR)/$(DEBUG_DIR)%.d) $(OCSRCS:$.m=$(DIR)/$(DEBUG_DIR)%.d)
2002-10-12 11:37:38 +00:00
endif
OBJS_AR := $(OBJS)
OBJS_AR += $(CSRCS:%.c=%.o)
OBJS_AR += $(CCSRCS:%.cpp=%.o)
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
OBJS_AR += $(OCCSRCS:%.mm=%.o)
OBJS_AR += $(OCSRCS:%.m=%.o)
OBJS_AR += $(WINRC:%.rc=%.res)
2002-10-12 11:37:38 +00:00
OBJS += $(CSRCS:%.c=$(DIR)/$(DEBUG_DIR)%.o)
OBJS += $(CCSRCS:%.cpp=$(DIR)/$(DEBUG_DIR)%.o)
OS X Makefiles: * added some new variables (mostly the same as with scons): - USE_COCOA: use Cocoa for ghost (defaults to true) - MACOSX_ARCHITECTURE: can be ppc, ppc64, i386, x86_64. By default this is the host architecture (ppc for PowerPC Macs, i386 for Intel Macs). In theory this allows to cross compile blender for a different architecture, though cross compilation only works on Intel Macs, because makesdna and makesrna are built for the target architecture. For a 64 bit build, set MACOSX_ARCHITECTURE to x86_64 (Intel) or ppc64 (PowerPC). - MACOSX_MIN_VERS: minimum OS X version to run blender on (10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_DEPLOYMENT_TARGET: needed by the linker to create an Application targeted for a specific OS version (defaults to 10.4 for 32 bit builds, 10.5 for 64 bit builds) - MACOSX_SDK: path to a specific SDK. currently not used - USE_QTKIT: use QTKit instead of QuickTime (defaults to true for 64 bit builds, as using QTKit is mandatory in that case)) * use the same compiler flags as scons * default compiler now is gcc-4.0 when building for 10.4 and gcc-4.2 when building for 10.5 * extract $(LCGDIR)/release/python_$(MACOSX_ARCHITECTURE).zip to Application bundle. This might break building on 10.4, to fix that, rename $(LCGDIR)/release/python.zip When compiling blender, only MACOSX_ARCHITECTURE might be of interest, as it allows doing 64 bit builds (or 32 bit PowerPC builds on Intel). All other variables are then set to reasonable defaults. For current users of the Makefile system, this commit shouldn't change much.
2010-01-03 20:35:13 +00:00
OBJS += $(OCCSRCS:%.mm=$(DIR)/$(DEBUG_DIR)%.o)
OBJS += $(OCSRCS:%.m=$(DIR)/$(DEBUG_DIR)%.o)
2002-10-12 11:37:38 +00:00
OBJS += $(WINRC:%.rc=$(DIR)/$(DEBUG_DIR)%.res)
JCLASS += $(JSRCS:%.java=$(DIR)/$(DEBUG_DIR)%.class)
LIB_a = $(DIR)/$(DEBUG_DIR)lib$(LIBNAME).a
$(LIB_a): $(OBJS)
# $OBJS can be empty except for some spaces
ifneq (x, x$(strip $(OBJS)))
ifdef NAN_PARANOID
@$(RM) $(LIB_a)
ifdef NAN_QUIET
@echo " -- lib: lib$(LIBNAME).a -- "
@cd $(DIR)/$(DEBUG_DIR); $(AR) $(ARFLAGSQUIET) $@ $(OBJS_AR)
2002-10-12 11:37:38 +00:00
else
cd $(DIR)/$(DEBUG_DIR); $(AR) $(ARFLAGS) $@ $(OBJS_AR)
2002-10-12 11:37:38 +00:00
endif
else
ifdef NAN_QUIET
@echo " -- lib: lib$(LIBNAME).a -- "
@$(AR) $(ARFLAGSQUIET) $@ $?
else
$(AR) $(ARFLAGS) $@ $?
endif
endif
ifdef RANLIB
$(RANLIB) $@
endif
endif
ALLTARGETS ?= $(LIB_a)
all debug :: makedir $(ALLTARGETS)
lib: $(LIB_a)
creator: $(OBJS)
@echo "====> make creator subtarget in `pwd | sed 's/^.*develop\///'`"
@$(MAKE) makedir DIR=$(DIR)/$(DEBUG_DIR)cre
@$(MAKE) lib CSRCS="$(CRE_CSRCS)" LIBNAME=$(LIBNAME)$@
publisher: $(OBJS)
@echo "====> make publisher subtarget in `pwd | sed 's/^.*develop\///'`"
@$(MAKE) makedir DIR=$(DIR)/$(DEBUG_DIR)pub
@$(MAKE) lib CSRCS="$(PUB_CSRCS)" LIBNAME=$(LIBNAME)$@
player: $(OBJS)
@echo "====> make player subtarget in `pwd | sed 's/^.*develop\///'`"
@$(MAKE) makedir DIR=$(DIR)/player/$(DEBUG_DIR)
@$(MAKE) lib CSRCS="$(SAP_CSRCS)" LIBNAME=$(LIBNAME)$@
clean:: optclean debugclean
optclean::
@-[ ! -d $(DIR) ] || ( cd $(DIR) && \
$(RM) *.o *.a *.d *.res ii_files/*.ii *.class *.h )
debugclean::
@-[ ! -d $(DIR)/debug ] || ( cd $(DIR)/debug && \
$(RM) *.o *.a *.d *.res ii_files/*.ii *.class *.h )
.PHONY: makedir
makedir::
@# don't use mkdir -p. Cygwin will try to make network paths and fail
@[ -d $(DIR) ] || mkdir $(DIR)
@[ -d $(DIR)/debug ] || mkdir $(DIR)/debug