sandey/blender
1
0
Fork 0
forked from bartvdbraak/blender
Code Pull Requests Activity
7cfb79256e
blender/build_files/build_environment/install_deps.sh

635 lines
15 KiB
Bash
Raw Normal View History

Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
#!/bin/bash
DISTRO=""
SRC="$HOME/src/blender-deps"
CWD=$PWD
THREADS=`cat /proc/cpuinfo | grep cores | uniq | sed -e "s/.*: *\(.*\)/\\1/"`
PYTHON_VERSION="3.3.0"
BOOST_VERSION="1_51_0"
OIIO_VERSION="1.1.0"
OCIO_VERSION="1.0.7"
FFMPEG_VERSION="1.0"
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
_ffmpeg_list_sep=";"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
HASXVID=false
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
XVIDDEV=""
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
HASVPX=false
HASMP3LAME=false
HASX264=false
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
HASOPENJPEG=false
HASSCHRO=false
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
More fixes: *Unset LANG envar for the script execution time, because commands like "apt-cache policy" will return translated messages, which would not be grep'ed crrectly... *Disable using distrib's ffmpeg for DEB distribs too, as e.g. official debian features libav under ffmpeg name, which is not that much compatible with current Blender code. *Also check for libxvidcore-dev .deb package, debian has no libxvidcore4-dev ;)
2012-11-13 10:49:55 +00:00
# Switch to english language, else some things (like check_package_DEB()) won't work!
LANG_BACK=$LANG
LANG=""
export LANG
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
ERROR() {
echo "${@}"
}
INFO() {
echo "${@}"
}
detect_distro() {
if [ -f /etc/debian_version ]; then
DISTRO="DEB"
elif [ -f /etc/redhat-release ]; then
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
DISTRO="RPM"
elif [ -f /etc/SuSE-release ]; then
DISTRO="SUSE"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
fi
}
prepare_opt() {
fix for boost (symlink was buggy, and better to only build needed boost libs). Note; we might also want to add the --without-icu option later...
2012-11-13 06:22:47 +00:00
INFO "Ensuring /opt/lib exists and writable by us"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
sudo mkdir -p /opt/lib
sudo chown $USER /opt/lib
sudo chmod 775 /opt/lib
}
compile_Python() {
if [ ! -d /opt/lib/python-$PYTHON_VERSION ]; then
INFO "Building Python-$PYTHON_VERSION"
prepare_opt
if [ ! -d $SRC/Python-$PYTHON_VERSION ]; then
mkdir -p $SRC
wget -c http://python.org/ftp/python/$PYTHON_VERSION/Python-$PYTHON_VERSION.tar.bz2 -P $SRC
INFO "Unpacking Python-$PYTHON_VERSION"
tar -C $SRC -xf $SRC/Python-$PYTHON_VERSION.tar.bz2
fi
cd $SRC/Python-$PYTHON_VERSION
./configure --prefix=/opt/lib/python-$PYTHON_VERSION --enable-ipv6 \
--enable-loadable-sqlite-extensions --with-dbmliborder=bdb \
--with-computed-gotos --with-pymalloc
make -j$THREADS
make install
make clean
rm -f /opt/lib/python-3.3
ln -s python-$PYTHON_VERSION /opt/lib/python-3.3
cd $CWD
fi
}
compile_Boost() {
INFO "Building boost"
version_dots=`echo "$BOOST_VERSION" | sed -r 's/_/./g'`
if [ ! -d /opt/lib/boost-$version_dots ]; then
INFO "Building Boost-$version_dots"
prepare_opt
if [ ! -d $SRC/boost_$BOOST_VERSION ]; then
INFO "Downloading Boost-$version_dots"
mkdir -p $SRC
wget -c http://sourceforge.net/projects/boost/files/boost/$version_dots/boost_$BOOST_VERSION.tar.bz2/download \
-O $SRC/boost_$BOOST_VERSION.tar.bz2
tar -C $SRC -xf $SRC/boost_$BOOST_VERSION.tar.bz2
fi
cd $SRC/boost_$BOOST_VERSION
fix for boost (symlink was buggy, and better to only build needed boost libs). Note; we might also want to add the --without-icu option later...
2012-11-13 06:22:47 +00:00
./bootstrap.sh --with-libraries=system,filesystem,thread,regex,locale --prefix=/opt/lib/boost-$version_dots
./b2 install
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
./b2 --clean
rm -f /opt/lib/boost
fix for boost (symlink was buggy, and better to only build needed boost libs). Note; we might also want to add the --without-icu option later...
2012-11-13 06:22:47 +00:00
ln -s boost-$version_dots /opt/lib/boost
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
cd $CWD
fi
}
compile_OCIO() {
if [ ! -d /opt/lib/ocio-$OCIO_VERSION ]; then
INFO "Building OpenColorIO-$OCIO_VERSION"
prepare_opt
if [ ! -d $SRC/OpenColorIO-$OCIO_VERSION ]; then
INFO "Downloading OpenColorIO-$OCIO_VERSION"
mkdir -p $SRC
wget -c http://github.com/imageworks/OpenColorIO/tarball/v$OCIO_VERSION \
-O $SRC/OpenColorIO-$OCIO_VERSION.tar.gz
INFO "Unpacking OpenColorIO-$OCIO_VERSION"
tar -C "$SRC" -xf $SRC/OpenColorIO-$OCIO_VERSION.tar.gz
mv $SRC/imageworks-OpenColorIO* $SRC/OpenColorIO-$OCIO_VERSION
fi
cd $SRC/OpenColorIO-$OCIO_VERSION
mkdir build
cd build
if file /bin/cp | grep -q '32-bit'; then
cflags="-fPIC -m32 -march=i686"
else
cflags="-fPIC"
fi
cmake -D CMAKE_BUILD_TYPE=Release \
-D CMAKE_PREFIX_PATH=/opt/lib/ocio-$OCIO_VERSION \
-D CMAKE_INSTALL_PREFIX=/opt/lib/ocio-$OCIO_VERSION \
-D CMAKE_CXX_FLAGS="$cflags" \
-D CMAKE_EXE_LINKER_FLAGS="-lgcc_s -lgcc" \
..
make -j$THREADS
make install
# Force linking against sttaic libs
rm -f /opt/lib/ocio-$OCIO_VERSION/lib/*.so*
# Additional depencencies
cp ext/dist/lib/libtinyxml.a /opt/lib/ocio-$OCIO_VERSION/lib
cp ext/dist/lib/libyaml-cpp.a /opt/lib/ocio-$OCIO_VERSION/lib
make clean
rm -f /opt/lib/ocio
ln -s ocio-$OCIO_VERSION /opt/lib/ocio
cd $CWD
fi
}
compile_OIIO() {
if [ ! -d /opt/lib/oiio-$OIIO_VERSION ]; then
INFO "Building OpenImageIO-$OIIO_VERSION"
prepare_opt
if [ ! -d $SRC/OpenImageIO-$OIIO_VERSION ]; then
wget -c https://github.com/OpenImageIO/oiio/tarball/Release-$OIIO_VERSION \
-O "$SRC/OpenImageIO-$OIIO_VERSION.tar.gz"
INFO "Unpacking OpenImageIO-$OIIO_VERSION"
tar -C $SRC -xf $SRC/OpenImageIO-$OIIO_VERSION.tar.gz
mv $SRC/OpenImageIO-oiio* $SRC/OpenImageIO-$OIIO_VERSION
fi
cd $SRC/OpenImageIO-$OIIO_VERSION
mkdir build
cd build
if [ -d /opt/lib/boost ]; then
boost_root="/opt/lib/boost"
else
boost_root="/usr"
fi
if file /bin/cp | grep -q '32-bit'; then
cflags="-fPIC -m32 -march=i686"
else
cflags="-fPIC"
fi
cmake -D CMAKE_BUILD_TYPE=Release \
-D CMAKE_PREFIX_PATH=/opt/lib/oiio-$OIIO_VERSION \
-D CMAKE_INSTALL_PREFIX=/opt/lib/oiio-$OIIO_VERSION \
-D BUILDSTATIC=ON \
-D CMAKE_CXX_FLAGS="$cflags" \
-D CMAKE_EXE_LINKER_FLAGS="-lgcc_s -lgcc" \
-D BOOST_ROOT="$boost_root" \
../src
make -j$THREADS
make install
make clean
rm -f /opt/lib/oiio
ln -s oiio-$OIIO_VERSION /opt/lib/oiio
cd $CWD
fi
}
compile_FFmpeg() {
if [ ! -d /opt/lib/ffmpeg-$FFMPEG_VERSION ]; then
INFO "Building FFmpeg-$FFMPEG_VERSION"
prepare_opt
if [ ! -d $SRC/ffmpeg-$FFMPEG_VERSION ]; then
INFO "Downloading FFmpeg-$FFMPEG_VERSION"
wget -c http://ffmpeg.org/releases/ffmpeg-$FFMPEG_VERSION.tar.bz2 -P $SRC
INFO "Unpacking FFmpeg-$FFMPEG_VERSION"
tar -C $SRC -xf $SRC/ffmpeg-$FFMPEG_VERSION.tar.bz2
fi
cd $SRC/ffmpeg-$FFMPEG_VERSION
extra=""
if $HASXVID; then
extra="$extra --enable-libxvid"
fi
if $HASVPX; then
extra="$extra --enable-libvpx"
fi
if $HASMP3LAME; then
extra="$extra --enable-libmp3lame"
fi
if $HASX264; then
extra="$extra --enable-libx264"
fi
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
if $HASOPENJPEG; then
extra="$extra --enable-libopenjpeg"
fi
if $HASSCHRO; then
extra="$extra --enable-libschroedinger"
fi
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
./configure --cc="gcc -Wl,--as-needed" --extra-ldflags="-pthread -static-libgcc" \
--prefix=/opt/lib/ffmpeg-$FFMPEG_VERSION --enable-static --enable-avfilter --disable-vdpau \
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
--disable-bzlib --disable-libgsm --disable-libspeex --enable-libtheora \
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
--enable-libvorbis --enable-pthreads --enable-zlib --enable-stripping --enable-runtime-cpudetect \
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
--disable-vaapi --disable-libfaac --disable-nonfree --enable-gpl \
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
--disable-postproc --disable-x11grab --disable-librtmp --disable-libopencore-amrnb \
--disable-libopencore-amrwb --disable-libdc1394 --disable-version3 --disable-outdev=sdl \
--disable-outdev=alsa --disable-indev=sdl --disable-indev=alsa --disable-indev=jack \
--disable-indev=lavfi $extra
More fixes: *Unset LANG envar for the script execution time, because commands like "apt-cache policy" will return translated messages, which would not be grep'ed crrectly... *Disable using distrib's ffmpeg for DEB distribs too, as e.g. official debian features libav under ffmpeg name, which is not that much compatible with current Blender code. *Also check for libxvidcore-dev .deb package, debian has no libxvidcore4-dev ;)
2012-11-13 10:49:55 +00:00
make -j$THREADS
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
make install
make clean
rm -f /opt/lib/ffmpeg
ln -s ffmpeg-$FFMPEG_VERSION /opt/lib/ffmpeg
cd $CWD
fi
}
deb_version() {
dpkg-query -W -f '${Version}' $1 | sed -r 's/^([0-9]\.[0-9]+).*/\1/'
}
check_package_DEB() {
r=`apt-cache policy $1 | grep -c 'Candidate:'`
if [ $r -ge 1 ]; then
return 0
else
return 1
fi
}
install_DEB() {
INFO "Installing dependencies for DEB-based distributive"
sudo apt-get update
sudo apt-get -y upgrade
sudo apt-get install -y cmake scons gcc g++ libjpeg-dev libpng-dev libtiff-dev \
libfreetype6-dev libx11-dev libxi-dev wget libsqlite3-dev libbz2-dev libncurses5-dev \
libssl-dev liblzma-dev libreadline-dev libopenjpeg-dev libopenexr-dev libopenal-dev \
libglew-dev yasm libschroedinger-dev libtheora-dev libvorbis-dev libsdl1.2-dev \
libfftw3-dev libjack-dev python-dev patch
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
HASOPENJPEG=true
HASSCHRO=true
More fixes: *Unset LANG envar for the script execution time, because commands like "apt-cache policy" will return translated messages, which would not be grep'ed crrectly... *Disable using distrib's ffmpeg for DEB distribs too, as e.g. official debian features libav under ffmpeg name, which is not that much compatible with current Blender code. *Also check for libxvidcore-dev .deb package, debian has no libxvidcore4-dev ;)
2012-11-13 10:49:55 +00:00
check_package_DEB libxvidcore-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libxvidcore-dev
HASXVID=true
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
XVIDDEV="libxvidcore-dev"
More fixes: *Unset LANG envar for the script execution time, because commands like "apt-cache policy" will return translated messages, which would not be grep'ed crrectly... *Disable using distrib's ffmpeg for DEB distribs too, as e.g. official debian features libav under ffmpeg name, which is not that much compatible with current Blender code. *Also check for libxvidcore-dev .deb package, debian has no libxvidcore4-dev ;)
2012-11-13 10:49:55 +00:00
fi
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
check_package_DEB libxvidcore4-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libxvidcore4-dev
HASXVID=true
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
XVIDDEV="libxvidcore4-dev"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
fi
check_package_DEB libmp3lame-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libmp3lame-dev
HASMP3LAME=true
fi
check_package_DEB libx264-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libx264-dev
HASX264=true
fi
check_package_DEB libvpx-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libvpx-dev
vpx_version=`deb_version libvpx-dev`
if [ ! -z "$vpx_version" ]; then
if dpkg --compare-versions $vpx_version gt 0.9.7; then
HASVPX=true
fi
fi
fi
check_package_DEB libspnav-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libspnav-dev
fi
check_package_DEB python3.3-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y python3.3-dev
else
compile_Python
fi
check_package_DEB libboost-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libboost-dev
boost_version=`deb_version libboost-dev`
check_package_DEB libboost-locale$boost_version-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libboost-locale$boost_version-dev libboost-filesystem$boost_version-dev \
libboost-regex$boost_version-dev libboost-system$boost_version-dev libboost-thread$boost_version-dev
else
compile_Boost
fi
else
compile_Boost
fi
check_package_DEB libopencolorio-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libopencolorio-dev
else
compile_OCIO
fi
check_package_DEB libopenimageio-dev
if [ $? -eq 0 ]; then
sudo apt-get install -y libopenimageio-dev
else
compile_OIIO
fi
More fixes: *Unset LANG envar for the script execution time, because commands like "apt-cache policy" will return translated messages, which would not be grep'ed crrectly... *Disable using distrib's ffmpeg for DEB distribs too, as e.g. official debian features libav under ffmpeg name, which is not that much compatible with current Blender code. *Also check for libxvidcore-dev .deb package, debian has no libxvidcore4-dev ;)
2012-11-13 10:49:55 +00:00
# XXX Debian features libav packages as ffmpeg, those are not really compatible with blender code currently :/
# So for now, always build our own ffmpeg.
# check_package_DEB ffmpeg
# if [ $? -eq 0 ]; then
# sudo apt-get install -y ffmpeg
# ffmpeg_version=`deb_version ffmpeg`
# INFO "ffmpeg version: $ffmpeg_version"
# if [ ! -z "$ffmpeg_version" ]; then
# if dpkg --compare-versions $ffmpeg_version gt 0.7.2; then
# sudo apt-get install -y libavfilter-dev libavcodec-dev libavdevice-dev libavformat-dev libavutil-dev libswscale-dev
# else
# compile_FFmpeg
# fi
# fi
# fi
compile_FFmpeg
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
}
check_package_RPM() {
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
r=`yum info $1 | grep -c 'Summary'`
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
if [ $r -ge 1 ]; then
return 0
else
return 1
fi
}
check_package_version_RPM() {
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
v=`yum info $1 | grep Version | tail -n 1 | sed -r 's/.*:\s+(([0-9]+\.?)+).*/\1/'`
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
# for now major and minor versions only (as if x.y, not x.y.z)
r=`echo $v | grep -c $2`
if [ $r -ge 1 ]; then
return 0
else
return 1
fi
}
install_RPM() {
INFO "Installing dependencies for RPM-based distributive"
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
sudo yum -y update
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
sudo yum -y install gcc gcc-c++ cmake scons libpng-devel libtiff-devel \
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
freetype-devel libX11-devel libXi-devel wget libsqlite3x-devel ncurses-devel \
readline-devel openjpeg-devel openexr-devel openal-soft-devel \
glew-devel yasm schroedinger-devel libtheora-devel libvorbis-devel SDL-devel \
fftw-devel lame-libs jack-audio-connection-kit-devel x264-devel libspnav-devel \
libjpeg-devel patch python-devel
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
HASOPENJPEG=true
HASSCHRO=true
check_package_version_RPM python-devel 3.3.
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
if [ $? -eq 0 ]; then
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
sudo yum install -y python-devel
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
else
compile_Python
fi
check_package_RPM boost-devel
if [ $? -eq 0 ]; then
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
sudo yum install -y boost-devel
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
else
compile_Boost
fi
check_package_RPM OpenColorIO-devel
if [ $? -eq 0 ]; then
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
sudo yum install -y OpenColorIO-devel
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
else
compile_OCIO
fi
check_package_RPM OpenImageIO-devel
if [ $? -eq 0 ]; then
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
sudo yum install -y OpenImageIO-devel
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
else
compile_OIIO
fi
# Always for now, not sure which packages should be installed
compile_FFmpeg
}
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
check_package_SUSE() {
r=`zypper info $1 | grep -c 'Summary'`
if [ $r -ge 1 ]; then
return 0
else
return 1
fi
}
check_package_version_SUSE() {
v=`zypper info $1 | grep Version | tail -n 1 | sed -r 's/.*:\s+(([0-9]+\.?)+).*/\1/'`
# for now major and minor versions only (as if x.y, not x.y.z)
r=`echo $v | grep -c $2`
if [ $r -ge 1 ]; then
return 0
else
return 1
fi
}
install_SUSE() {
INFO "Installing dependencies for SuSE-based distributive"
sudo zypper --non-interactive update --auto-agree-with-licenses
sudo zypper --non-interactive install --auto-agree-with-licenses \
gcc gcc-c++ libSDL-devel openal-soft-devel libpng12-devel libjpeg62-devel \
libtiff-devel OpenEXR-devel yasm libtheora-devel libvorbis-devel cmake \
Hopefully now suse will just work :)
2012-11-13 10:12:42 +00:00
scons patch
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
check_package_version_SUSE python3-devel 3.3.
if [ $? -eq 0 ]; then
sudo zypper --non-interactive install --auto-agree-with-licenses python3-devel
else
compile_Python
fi
# can not see boost_locale in repo, so let's build own boost
compile_Boost
# this libraries are also missing in the repo
compile_OCIO
compile_OIIO
compile_FFmpeg
}
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
print_info_ffmpeglink_DEB() {
_packages="libtheora-dev"
if $HASXVID; then
_packages="$_packages $XVIDDEV"
fi
if $HASVPX; then
_packages="$_packages libvpx-dev"
fi
if $HASMP3LAME; then
_packages="$_packages libmp3lame-dev"
fi
if $HASX264; then
_packages="$_packages libx264-dev"
fi
if $HASOPENJPEG; then
_packages="$_packages libopenjpeg-dev"
fi
if $HASSCHRO; then
_packages="$_packages libschroedinger-dev"
fi
Adding an escape for '/' char inside the regex's char classe, looks like it is needed for ubuntu 's awk but not mandatory for debian's awk??? Anyway, does not arm... ;)
2012-11-13 18:04:52 +00:00
dpkg -L $_packages | grep -e ".*\/lib[^\/]\+\.so" | awk '{ printf(nlines ? "'"$_ffmpeg_list_sep"'%s" : "%s", gensub(/.*lib([^\/]+)\.so/, "\\1", "g", $0)); nlines++ }'
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
}
print_info_ffmpeglink() {
# This func must only print a ';'-separated list of libs...
if [ -z "$DISTRO" ]; then
ERROR "Failed to detect distribution type"
exit 1
elif [ "$DISTRO" = "DEB" ]; then
print_info_ffmpeglink_DEB
# XXX TODO!
else INFO "<Could not determine additional link libraries needed for ffmpeg, replace this by valid list of libs...>"
# elif [ "$DISTRO" = "RPM" ]; then
# print_info_ffmpeglink_RPM
# elif [ "$DISTRO" = "SUSE" ]; then
# print_info_ffmpeglink_SUSE
fi
}
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
print_info() {
INFO ""
INFO "If you're using CMake add this to your configuration flags:"
if [ -d /opt/lib/boost ]; then
INFO " -D BOOST_ROOT=/opt/lib/boost"
INFO " -D Boost_NO_SYSTEM_PATHS=ON"
fi
if [ -d /opt/lib/ffmpeg ]; then
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
INFO " -D WITH_CODEC_FFMPEG=ON"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
INFO " -D FFMPEG=/opt/lib/ffmpeg"
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
INFO " -D FFMPEG_LIBRARIES='avformat;avcodec;avutil;avdevice;swscale;`print_info_ffmpeglink`'"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
fi
INFO ""
INFO "If you're using SCons add this to your user-config:"
Fixes for scons
2012-11-13 18:12:57 +00:00
if [ -d /opt/lib/python-3.3 ]; then
INFO "BF_PYTHON='/opt/lib/python-3.3'"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
INFO "BF_PYTHON_ABI_FLAGS='m'"
fi
if [ -d /opt/lib/ocio ]; then
INFO "BF_OCIO='/opt/lib/ocio'"
fi
if [ -d /opt/lib/oiio ]; then
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
INFO "BF_OIIO='/opt/lib/oiio'"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
fi
if [ -d /opt/lib/boost ]; then
INFO "BF_BOOST='/opt/lib/boost'"
fi
if [ -d /opt/lib/ffmpeg ]; then
INFO "BF_FFMPEG='/opt/lib/ffmpeg'"
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
_ffmpeg_list_sep=" "
INFO "BF_FFMPEG_LIB='avformat avcodec swscale avutil avdevice `print_info_ffmpeglink`'"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
fi
}
# Detect distributive type used on this machine
detect_distro
if [ -z "$DISTRO" ]; then
Add more info to make ffmpeg work "out of the box" for DEB systems: *For CMake, enable ffmpeg (it is disabled by default...) *Give the full list a librairies to link. Tested on Debian for CMake (did not test scons at all for now, anyway). Not yet implemented for RPM/SUSE distribs, but this should not be too hard.
2012-11-13 16:42:36 +00:00
ERROR "Failed to detect distribution type"
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
exit 1
elif [ "$DISTRO" = "DEB" ]; then
install_DEB
elif [ "$DISTRO" = "RPM" ]; then
install_RPM
Install dependencies script: added support of OpenSUSE Currently it'll install basic packages only and will compile all python, boost, oiio, ocio and ffmpeg.
2012-11-13 09:29:22 +00:00
elif [ "$DISTRO" = "SUSE" ]; then
install_SUSE
Initial implementation of a script for automatic dependencies installer/builder This script will install all packages from the repositories and will compile missing in repositories libraries. It is supposed to replace pre-compiled libraries from our svn. Tested script on Fedora 14 and 17, Ubuntu 10.04 and 12.10. All the dependencies and manually built libraries seems to be fine. However, it's really annoying to build blender in virtual machine to ensure there's no linking errors, i would hope community will help testing and making needed tweaks to the script :) To use the script, simple run it from your user name. It'll run installation commands from a sudo, so you would likely be requested to type a password. I've made tweaks to CMake FindLibs, so it should find OIIO, OCIO and python libraries compiled by this script. Boost and FFmpeg would need to be specified manually. SCons currently would require manual paths specifications as well. Perhaps we could make SCons smarter in the future. All the parameters you need to pass to CMake/SCons would be printed when script finishes to run. Pretty much sure it's not production-ready script, but we need to start testing at some point :)
2012-11-12 19:39:09 +00:00
fi
print_info
More fixes: *Unset LANG envar for the script execution time, because commands like "apt-cache policy" will return translated messages, which would not be grep'ed crrectly... *Disable using distrib's ffmpeg for DEB distribs too, as e.g. official debian features libav under ffmpeg name, which is not that much compatible with current Blender code. *Also check for libxvidcore-dev .deb package, debian has no libxvidcore4-dev ;)
2012-11-13 10:49:55 +00:00
# Switch back to user language.
LANG=LANG_BACK
export LANG
Copy Permalink