svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r17471:HEAD

SConstruct

@@ -249,7 +249,7 @@ if len(B.quickdebug) > 0 and printdebug != 0:
 # remove stdc++ from LLIBS if we are building a statc linked CXXFLAGS
 if env['WITH_BF_STATICCXX']:
 	if 'stdc++' in env['LLIBS']:
-		env['LLIBS'] = env['LLIBS'].replace('stdc++', ' ')
+		env['LLIBS'].remove('stdc++')
 	else:
 		print '\tcould not remove stdc++ library from LLIBS, WITH_BF_STATICCXX may not work for your platform'
 

config/darwin-config.py

@@ -216,14 +216,14 @@ CXXFLAGS = [ '-pipe','-fPIC','-funsigned-char', '-fpascal-strings']
 PLATFORM_LINKFLAGS = '-fexceptions -framework CoreServices -framework Foundation -framework IOKit -framework AppKit -framework Carbon -framework AGL -framework AudioUnit -framework AudioToolbox -framework CoreAudio -framework QuickTime'
 
 #note to build succesfully on 10.3.9 SDK you need to patch  10.3.9 by adding the SystemStubs.a lib from 10.4
-LLIBS = 'stdc++ SystemStubs'
+LLIBS = ['stdc++', 'SystemStubs']
 
 # some flags shuffling for different Os versions
 if MAC_MIN_VERS == '10.3':
 	CFLAGS = ['-fuse-cxa-atexit']+CFLAGS
 	CXXFLAGS = ['-fuse-cxa-atexit']+CXXFLAGS
 	PLATFORM_LINKFLAGS = '-fuse-cxa-atexit '+PLATFORM_LINKFLAGS
-	LLIBS = LLIBS + ' crt3.o'
+	LLIBS.append('crt3.o')
 	
 if USE_SDK==True:
 	SDK_FLAGS=['-isysroot', MACOSX_SDK,'-mmacosx-version-min='+MAC_MIN_VERS]	
@@ -261,6 +261,7 @@ CC_WARN = ['-Wall', '-Wno-long-double']
 ##DYNLDFLAGS = -shared $(LDFLAGS)
 
 BF_PROFILE_CCFLAGS = ['-pg', '-g ']
+BF_PROFILE_LINKFLAGS = ['-pg']
 BF_PROFILE = False
 
 BF_DEBUG = False

config/linux2-config.py

@@ -193,12 +193,13 @@ CC_WARN = ['-Wall']
 
 ##FIX_STUBS_WARNINGS = -Wno-unused
 
-LLIBS = 'util c m dl pthread stdc++'
+LLIBS = ['util', 'c', 'm', 'dl', 'pthread', 'stdc++']
 ##LOPTS = --dynamic
 ##DYNLDFLAGS = -shared $(LDFLAGS)
 
 BF_PROFILE = False
 BF_PROFILE_CCFLAGS = ['-pg','-g']
+BF_PROFILE_LINKFLAGS = ['-pg']
 
 BF_DEBUG = False
 BF_DEBUG_CCFLAGS = ['-g']

config/linuxcross-config.py

@@ -149,6 +149,10 @@ LLIBS = [ '-ldxguid', '-lgdi32', '-lmsvcrt', '-lwinmm', '-lmingw32', '-lm', '-lw
 BF_DEBUG = False
 BF_DEBUG_CCFLAGS= []
 
+BF_PROFILE = False
+BF_PROFILE_CCFLAGS = ['-pg','-g']
+BF_PROFILE_LINKFLAGS = ['-pg']
+
 BF_BUILDDIR = '../build/linuxcross'
 BF_INSTALLDIR='../install/linuxcross'
 BF_DOCDIR='../install/doc'

config/openbsd3-config.py

@@ -151,12 +151,13 @@ CC_WARN = ['-Wall']
 
 ##FIX_STUBS_WARNINGS = -Wno-unused
 
-LLIBS = 'm stdc++ pthread util'
+LLIBS = ['m', 'stdc++', 'pthread', 'util']
 ##LOPTS = --dynamic
 ##DYNLDFLAGS = -shared $(LDFLAGS)
 
-BF_PROFILE_CCFLAGS = ['-pg', '-g']
 BF_PROFILE = False
+BF_PROFILE_CCFLAGS = ['-pg','-g']
+BF_PROFILE_LINKFLAGS = ['-pg']
 
 BF_DEBUG = False
 BF_DEBUG_CCFLAGS = ['-g']

config/sunos5-config.py

@@ -165,11 +165,12 @@ CC_WARN = ['-Wall']
 
 ##FIX_STUBS_WARNINGS = -Wno-unused
 
-LLIBS = 'c m dl pthread stdc++'
+LLIBS = ['c', 'm', 'dl', 'pthread', 'stdc++']
 ##LOPTS = --dynamic
 ##DYNLDFLAGS = -shared $(LDFLAGS)
 
 BF_PROFILE_CCFLAGS = ['-pg', '-g ']
+BF_PROFILE_LINKFLAGS = ['-pg']
 BF_PROFILE = False
 
 BF_DEBUG = False

config/win32-mingw-config.py

@@ -165,6 +165,7 @@ BF_DEBUG = False
 BF_DEBUG_CCFLAGS= ['-g']
 
 BF_PROFILE_CCFLAGS = ['-pg', '-g ']
+BF_PROFILE_LINKFLAGS = ['-pg']
 BF_PROFILE = False
 
 BF_BUILDDIR = '..\\build\\win32-mingw'

config/win32-vc-config.py

@@ -181,7 +181,7 @@ C_WARN = []
 CC_WARN = []
 CXX_WARN = []
 
-LLIBS = 'ws2_32 vfw32 winmm kernel32 user32 gdi32 comdlg32 advapi32 shfolder shell32 ole32 oleaut32 uuid'
+LLIBS = ['ws2_32', 'vfw32', 'winmm', 'kernel32', 'user32', 'gdi32', 'comdlg32', 'advapi32', 'shfolder', 'shell32', 'ole32', 'oleaut32', 'uuid']
 
 PLATFORM_LINKFLAGS = '''
                        /SUBSYSTEM:CONSOLE
@@ -197,6 +197,11 @@ PLATFORM_LINKFLAGS = '''
                        /LARGEADDRESSAWARE
                    '''
 
+# # Todo
+# BF_PROFILE_CCFLAGS = ['-pg', '-g ']
+# BF_PROFILE_LINKFLAGS = ['-pg']
+# BF_PROFILE = False
+
 BF_BUILDDIR = '..\\build\\win32-vc'
 BF_INSTALLDIR='..\\install\\win32-vc'
 BF_DOCDIR='..\\install\\doc'

release/scripts/import_dxf.py

@@ -7,7 +7,7 @@ Group: 'Import'
 Tooltip: 'Import for DXF geometry data (Drawing eXchange Format).'
 """
 __author__ = 'Kitsu(Ed Blake) & migius(Remigiusz Fiedler)'
-__version__ = '1.12 - 2008.08.03 by migius'
+__version__ = '1.12 - 2008.11.16 by migius'
 __url__ = ["http://blenderartists.org/forum/showthread.php?t=84319",
 	 "http://wiki.blender.org/index.php/Scripts/Manual/Import/DXF-3D"]
 __email__ = ["migius(at)4d-vectors.de","Kitsune_e(at)yahoo.com"]
@@ -111,6 +111,9 @@ History:
  -- support ortho mode for VIEWs and VPORTs as cameras 
 
 
+ v1.12 - 2008.11.16 by migius
+ d1 remove try_finally: cause not supported in python <2.5
+ d1 add Bezier curves bevel radius support (default 1.0)
  v1.12 - 2008.08.03 by migius
  c2 warningfix: relocating of globals: layersmap, oblist 
  c2 modif UI: buttons newScene+targetLayer moved to start panel
@@ -299,7 +302,7 @@ History:
 import Blender
 from Blender import *
 #from Blender.Mathutils import Vector, Matrix
-import bpy
+#import bpy #not used yet
 #import BPyMessages
 
 from dxfReader import readDXF
@@ -311,7 +314,7 @@ from math import *
 
 try:
 	import os
-	if os.name:# != 'mac':
+	if os.name != 'mac':
 		import psyco
 		psyco.log(Blender.Get('tempdir')+"/blender.log-psyco")
 		#psyco.log()
@@ -320,7 +323,7 @@ try:
 		psyco.profile(0.2)
 		#print 'psyco imported'
 except ImportError:
-	#print 'psyco not imported'
+	print 'psyco not imported'
 	pass
 
 #try: Curve.orderU
@@ -346,7 +349,7 @@ THIN_RESOLUTION = 8   #(4-64) thin_cylinder arc_resolution - number of segments
 MIN_THICK = MIN_DIST * 10.0  #minimal thickness by forced thickness
 MIN_WIDTH = MIN_DIST * 10.0  #minimal width by forced width
 TRIM_LIMIT = 3.0	 #limit for triming of polylines-wide-segments (values:0.0 - 5.0)
-ELEVATION = 0.0 #standard elevation = coordinate Z
+ELEVATION = 0.0 #standard elevation = coordinate Z value
 
 BYBLOCK = 0
 BYLAYER = 256
@@ -817,6 +820,7 @@ class Line:  #-----------------------------------------------------------------
 			curve.append(BezTriple.New(points[1]))
 			for point in curve:
 				point.handleTypes = [VECT, VECT]
+				point.radius = 1.0
 			curve.flagU = 0 # 0 sets the curve not cyclic=open
 			c.setResolu(settings.var['curve_res'])
 			c.update() #important for handles calculation
@@ -1341,9 +1345,11 @@ class Polyline:  #--------------------------------------------------------------
 				nurbs_points.append(pkt)
 			firstpoint = nurbs_points[0]
 			curve = pline.appendNurb(firstpoint)
-			curve.setType(4) # set curvetype NURBS
+			curve.setType(4) # set curve_type NURBS
+			print 'deb: dir(curve):', dir(curve[-1]) #----------------
 			for point in nurbs_points[1:]:
 				curve.append(point)
+				#TODO: what is the trick for bevel radius? curve[-1].radius = 1.0
 			if self.closed:
 				curve.flagU = 1+0 # Set curve cyclic=close and uni
 			else:
@@ -1359,6 +1365,7 @@ class Polyline:  #--------------------------------------------------------------
 				curve.append(BezTriple.New(p))
 			for point in curve:
 				point.handleTypes = [AUTO, AUTO]
+				point.radius = 1.0
 			if self.closed:
 				curve.flagU = 1 # Set curve cyclic=close
 			else:
@@ -1380,6 +1387,7 @@ class Polyline:  #--------------------------------------------------------------
 				curve.append(BezTriple.New(p))
 			for point in curve:
 				point.handleTypes = [AUTO, AUTO]
+				point.radius = 1.0
 			#curve.setType(1) #Bezier curve
 			if self.closed:
 				curve.flagU = 5 #1 # Set curve cyclic=close
@@ -1392,6 +1400,7 @@ class Polyline:  #--------------------------------------------------------------
 					p0h1 = [p0h1[i]+begtangent[i] for i in range(3)]
 					curve.__setitem__(0,BezTriple.New(p0h1+p0+p0h2))
 				curve[0].handleTypes = [FREE, ALIGN]   #remi--todo-----
+				curve[0].radius = 1.0
 				if endtangent:
 					#print 'deb:polyline2dCurve.draw curve[-1].vec:', curve[-1].vec #-----
 					#print 'deb:polyline2dCurve.draw endtangent:', endtangent #-----
@@ -1401,6 +1410,7 @@ class Polyline:  #--------------------------------------------------------------
 					curve.__setitem__(-1,BezTriple.New(p0h1+p0+p0h2))
 					#print 'deb:polyline2dCurve.draw curve[-1].vec:', curve[-1].vec #-----
 				curve[-1].handleTypes = [ALIGN, FREE]   #remi--todo-----
+				curve[-1].radius = 1.0
 
 
 
@@ -1420,13 +1430,16 @@ class Polyline:  #--------------------------------------------------------------
 						if i == 0: curve = pline.appendNurb(BezTriple.New(verts[0]))
 						else: curve.append(BezTriple.New(verts[0]))
 						curve[-1].handleTypes = [VECT, VECT]  #--todo--calculation of bezier-tangents
+						curve[-1].radius = 1.0
 						for p in verts[1:]:
 							curve.append(BezTriple.New(p))
 							curve[-1].handleTypes = [AUTO, AUTO]
+							curve[-1].radius = 1.0
 					else:
 						if i == 0: curve = pline.appendNurb(BezTriple.New(point1.loc))
 						else: curve.append(BezTriple.New(point1.loc))
 						curve[-1].handleTypes = [VECT, VECT]   #--todo--calculation of bezier-tangents
+						curve[-1].radius = 1.0
 
 				elif True:   #----- optimised Bezier-Handles calculation --------------------------------
 					#print 'deb:drawPlineCurve: i:', i #---------
@@ -1446,10 +1459,12 @@ class Polyline:  #--------------------------------------------------------------
 						if i == 0: curve = pline.appendNurb(BezTriple.New(VectorTriples[0]))
 						else: curve.append(BezTriple.New(VectorTriples[0]))
 						curve[-1].handleTypes = [prevHandleType, FREE]
+						curve[-1].radius = 1.0
 
 						for p in VectorTriples[1:-1]:
 							curve.append(BezTriple.New(p))
 							curve[-1].handleTypes = [FREE, FREE]
+							curve[-1].radius = 1.0
 
 						prevHandleVect = VectorTriples[-1][:3]
 						prevHandleType = FREE
@@ -1462,10 +1477,12 @@ class Polyline:  #--------------------------------------------------------------
 							curve.append(BezTriple.New(VectorTriples))
 							curve[-1].handleTypes = [FREE, VECT]
 							prevHandleType = VECT
+							curve[-1].radius = 1.0
 						else:
 							if i == 0: curve = pline.appendNurb(BezTriple.New(point1.loc))
 							else: curve.append(BezTriple.New(point1.loc))
 							curve[-1].handleTypes = [VECT, VECT]
+							curve[-1].radius = 1.0
 
 
 
@@ -1486,10 +1503,12 @@ class Polyline:  #--------------------------------------------------------------
 					curve.__setitem__(0,BezTriple.New(p0h1+p0+p0h2))
 
 					curve[0].handleTypes = [FREE,prevHandleType2]
+					curve[0].radius = 1.0
 					#print 'deb:drawPlineCurve:closed curve[0].vec:', curve[0].vec #----------
 					#print 'deb:drawPlineCurve:closed curve[0].handleTypes:', curve[0].handleTypes #----------
 				else: 
 					curve[0].handleTypes[0] = VECT
+					curve[0].radius = 1.0
 			else: 
 				curve.flagU = 0 # Set curve not cyclic=open
 
@@ -2177,9 +2196,10 @@ DXF: X value; APP: 3D point, Y and Z values of control points (in WCS) (one entr
 		self.ctrlpk_len = getit(obj, 73, 0) # Number of control points
 		self.fit_pk_len = getit(obj, 74, 0) # Number of fit points (if any)
 
+		#TODO: import SPLINE as Bezier curve directly, possible?
 		#print 'deb:Spline self.fit_pk_len=', self.fit_pk_len #------------------------
 		#self.fit_pk_len = 0 # temp for debug
-		if self.fit_pk_len and 'spline_as'==5:
+		if self.fit_pk_len and settings.var['splines_as']==5:
 			self.spline = False
 			self.curved = True
 		else:
@@ -2675,6 +2695,7 @@ class Circle:  #----------------------------------------------------------------
 					curve.append(BezTriple.New(p))
 				for point in curve:
 					point.handleTypes = [FREE, FREE]
+					point.radius = 1.0
 			else:	# standard version
 				c = Curve.New(obname)   # create new curve data
 				p1 = (0, -radius, 0)
@@ -2693,6 +2714,7 @@ class Circle:  #----------------------------------------------------------------
 				curve.append(p4)
 				for point in curve:
 					point.handleTypes = [AUTO, AUTO]
+					point.radius = 1.0
 
 			curve.flagU = 1	 # 1 sets the curve cyclic=closed
 			if settings.var['fill_on']:
@@ -2893,6 +2915,7 @@ class Arc:  #-----------------------------------------------------------------
 				curve.append(BezTriple.New(p))
 			for point in curve:
 				point.handleTypes = [FREE, FREE]
+				point.radius = 1.0
 			curve.flagU = 0 # 0 sets the curve not cyclic=open
 			arc.setResolu(settings.var['curve_res'])
 
@@ -3449,6 +3472,7 @@ class Ellipse:  #---------------------------------------------------------------
 					curve.append(BezTriple.New(p))
 				for point in curve:
 					point.handleTypes = [FREE, FREE]
+					point.radius = 1.0
 				curve.flagU = 1 # 0 sets the curve not cyclic=open
 				if settings.var['fill_on']:
 					arc.setFlag(6) # 2+4 set top and button caps
@@ -3459,6 +3483,7 @@ class Ellipse:  #---------------------------------------------------------------
 					curve.append(BezTriple.New(p))
 				for point in curve:
 					point.handleTypes = [FREE, FREE]
+					point.radius = 1.0
 				curve.flagU = 0 # 0 sets the curve not cyclic=open
 
 			arc.setResolu(settings.var['curve_res'])
@@ -4397,8 +4422,7 @@ def	analyzeDXF(dxfFile): #---------------------------------------
 		Draw.PupMenu('DXF importer: report saved in INF-file:%t|' + '\'%s\'' %infFile)
 	except:
 		Draw.PupMenu('DXF importer: ERROR by writing report in INF-file:%t|' + '\'%s\'' %infFile)
-	finally:
+	#finally: f.close()
-		f.close()
 
 
 
@@ -4417,7 +4441,8 @@ def main(dxfFile):  #---------------#############################-----------
 	global cur_COUNTER  #counter for progress_bar
 	cur_COUNTER = 0
 
-	try:
+	#try:
+	if 1:
 		#print "Getting settings..."
 		global GUI_A, GUI_B, g_scale_as
 		if not GUI_A['g_scale_on'].val:
@@ -4500,7 +4525,7 @@ def main(dxfFile):  #---------------#############################-----------
 		#settings.write(message)
 		if UI_MODE: Draw.PupMenu('DXF importer:	Done!|finished in %.4f sec.' % time_text)
 
-	finally:
+	#finally:
 		# restore state even if things didn't work
 		#print 'deb:drawEntities finally!' #-----------------------
 		Window.WaitCursor(False)
@@ -5190,6 +5215,7 @@ def drawCurveCircle(circle):  #--- no more used --------------------------------
 	curve.append(p4)
 	for point in curve:
 		point.handleTypes = [AUTO, AUTO]
+		point.radius = 1.0
 	curve.flagU = 1 # Set curve cyclic
 	c.update()
 
@@ -5231,6 +5257,7 @@ def drawCurveArc(self):  #---- only for ELLIPSE --------------------------------
 	curve.append(p4)
 	for point in curve:
 		point.handleTypes = [AUTO, AUTO]
+		point.radius = 1.0
 	curve.flagU = 1 # Set curve cyclic
 	a.update()
 
@@ -5270,12 +5297,12 @@ GUI_B = {}  # GUI-buttons dictionary for drawingTypes
 # settings default, initialize ------------------------
 
 points_as_menu  = "convert to: %t|empty %x1|mesh.vertex %x2|thin sphere %x3|thin box %x4|*curve.vertex %x5"
-lines_as_menu   = "convert to: %t|*edge %x1|mesh %x2|*thin cylinder %x3|thin box %x4|Bezier-curve %x5|NURBS-curve %x6"
+lines_as_menu   = "convert to: %t|*edge %x1|mesh %x2|*thin cylinder %x3|thin box %x4|Bezier-curve %x5|*NURBS-curve %x6"
 mlines_as_menu  = "convert to: %t|*edge %x1|*mesh %x2|*thin cylinder %x3|*thin box %x|*curve %x5"
 plines_as_menu  = "convert to: %t|*edge %x1|mesh %x2|*thin cylinder %x3|*thin box %x4|Bezier-curve %x5|NURBS-curve %x6"
-splines_as_menu = "convert to: %t|mesh %x2|*thin cylinder %x3|*thin box %x4|Bezier-curve %x5|NURBS-curve %x6"
+splines_as_menu = "convert to: %t|mesh %x2|*thin cylinder %x3|*thin box %x4|*Bezier-curve %x5|NURBS-curve %x6"
 plines3_as_menu = "convert to: %t|*edge %x1|mesh %x2|*thin cylinder %x3|*thin box %x4|Bezier-curve %x5|NURBS-curve %x6"
-plmesh_as_menu  = "convert to: %t|*edge %x1|mesh %x2|NURBS-surface %x6"
+plmesh_as_menu  = "convert to: %t|*edge %x1|mesh %x2|*NURBS-surface %x6"
 solids_as_menu  = "convert to: %t|*edge %x1|mesh %x2"
 blocks_as_menu  = "convert to: %t|dupliGroup %x1|*real.Group %x2|*exploded %x3"
 texts_as_menu   = "convert to: %t|text %x1|*mesh %x2|*curve %x5"
@@ -5456,11 +5483,9 @@ def saveConfig():  #--todo-----------------------------------------------
 		else:
 			#if BPyMessages.Warning_SaveOver(iniFile): #<- remi find it too abstarct
 			if sys.exists(iniFile):
-				try:
 				f = file(iniFile, 'r')
-					try: header_str = f.readline()
+				header_str = f.readline()
-					finally: f.close()
+				f.close()
-				except: pass
 				if header_str.startswith(INIFILE_HEADER[0:13]):
 					if Draw.PupMenu('  OK ? %t|SAVE OVER: ' + '\'%s\'' %iniFile) == 1:
 						save_ok = True
@@ -5480,10 +5505,9 @@ def saveConfig():  #--todo-----------------------------------------------
 				output_str = '{\n'.join(output_str.split('{'))
 				try:
 					f = file(iniFile, 'w')
-					try:
 					f.write(INIFILE_HEADER + '\n# this is a comment line\n')
 					f.write(output_str)
-					finally: f.close()
+					f.close()
 					#Draw.PupMenu('DXF importer: INI-file: Done!%t|config-data saved in ' + '\'%s\'' %iniFile)
 				except:
 					Draw.PupMenu('DXF importer: INI-file: Error!%t|failure by writing to ' + '\'%s\'|no config-data saved!' %iniFile)
@@ -5508,9 +5532,7 @@ def loadConfig():  #remi--todo-----------------------------------------------
 	update_RegistryKey('iniFileName', iniFile)
 	#print 'deb:loadConfig iniFile: ', iniFile #----------------------
 	if iniFile.lower().endswith(INIFILE_EXTENSION) and sys.exists(iniFile):
-		try:
 		f = file(iniFile, 'r')
-			try:
 		header_str = f.readline()
 		if header_str.startswith(INIFILE_HEADER):
 			data_str = f.read()
@@ -5524,9 +5546,8 @@ def loadConfig():  #remi--todo-----------------------------------------------
 				try: GUI_B[k].val = v
 				except:	GUI_B[k] = Draw.Create(v)
 		else:
+			f.close()
 			Draw.PupMenu('DXF importer: INI-file:  Alert!%t|no valid header in INI-file: ' + '\'%s\'' %iniFile)
-			finally: f.close()
-		except: pass
 	else:
 		Draw.PupMenu('DXF importer: INI-file:  Alert!%t|no valid INI-file selected!')
 		print "DXF importer: Alert!: no valid INI-file selected."

source/blender/blenlib/intern/arithb.c

@@ -1351,8 +1351,8 @@ void Mat4ToQuat( float m[][4], float *q)
 
 void QuatOne(float *q)
 {
-	q[0]= q[2]= q[3]= 0.0;
+	q[0]= 1.0;
-	q[1]= 1.0;
+	q[1]= q[2]= q[3]= 0.0;
 }
 
 void NormalQuat(float *q)

source/blender/imbuf/IMB_imbuf.h

@@ -403,9 +403,14 @@ void IMB_convert_rgba_to_abgr(struct ImBuf *ibuf);
  *
  * @attention defined in imageprocess.c
  */
-void bicubic_interpolation(struct ImBuf *in, struct ImBuf *out, float x, float y, int xout, int yout);
+void bicubic_interpolation(struct ImBuf *in, struct ImBuf *out, float u, float v, int xout, int yout);
 void neareast_interpolation(struct ImBuf *in, struct ImBuf *out, float u, float v, int xout, int yout);
 void bilinear_interpolation(struct ImBuf *in, struct ImBuf *out, float u, float v, int xout, int yout);
+
+void bicubic_interpolation_color(struct ImBuf *in, unsigned char *col, float *col_float, float u, float v);
+void neareast_interpolation_color(struct ImBuf *in, unsigned char *col, float *col_float, float u, float v);
+void bilinear_interpolation_color(struct ImBuf *in, unsigned char *col, float *col_float, float u, float v);
+
 /**
  * Change the ordering of the color bytes pointed to by rect from
  * rgba to abgr. size * 4 color bytes are reordered.

source/blender/imbuf/intern/imageprocess.c

@@ -80,6 +80,17 @@ void IMB_convert_rgba_to_abgr(struct ImBuf *ibuf)
 		}
 	}
 }
+static void pixel_from_buffer(struct ImBuf *ibuf, unsigned char *outI, float *outF, int x, int y)
+
+{
+	int offset = ibuf->x * y * 4 + 4*x;
+	
+	if (ibuf->rect)
+		outI= (unsigned char *)ibuf->rect + offset;
+	
+	if (ibuf->rect_float)
+		outF= (float *)ibuf->rect_float + offset;
+}
 
 /**************************************************************************
 *                            INTERPOLATIONS 
@@ -92,32 +103,40 @@ void IMB_convert_rgba_to_abgr(struct ImBuf *ibuf)
 /*  More info: http://wiki.blender.org/index.php/User:Damiles#Bicubic_pixel_interpolation
 */
 /* function assumes out to be zero'ed, only does RGBA */
+
+static float P(float k){
+	float p1, p2, p3, p4;
+	p1 = MAX2(k+2.0f,0);
+	p2 = MAX2(k+1.0f,0);
+	p3 = MAX2(k,0);
+	p4 = MAX2(k-1.0f,0);
+	return (float)(1.0f/6.0f)*( p1*p1*p1 - 4.0f * p2*p2*p2 + 6.0f * p3*p3*p3 - 4.0f * p4*p4*p4);
+}
+
+
+#if 0
+/* older, slower function, works the same as above */
 static float P(float k){
 	return (float)(1.0f/6.0f)*( pow( MAX2(k+2.0f,0) , 3.0f ) - 4.0f * pow( MAX2(k+1.0f,0) , 3.0f ) + 6.0f * pow( MAX2(k,0) , 3.0f ) - 4.0f * pow( MAX2(k-1.0f,0) , 3.0f));
 }
+#endif
 
-void bicubic_interpolation(ImBuf *in, ImBuf *out, float x, float y, int xout, int yout)
+void bicubic_interpolation_color(struct ImBuf *in, unsigned char *outI, float *outF, float u, float v)
 {
 	int i,j,n,m,x1,y1;
-	unsigned char *dataI,*outI;
+	unsigned char *dataI;
-	float a,b,w,wx,wy[4], outR,outG,outB,outA,*dataF,*outF;
+	float a,b,w,wx,wy[4], outR,outG,outB,outA,*dataF;
-	int do_rect, do_float;
 
-	if (in == NULL) return;
+	/* ImBuf in must have a valid rect or rect_float, assume this is alredy checked */
-	if (in->rect == NULL && in->rect_float == NULL) return;
 
-	do_rect= (out->rect != NULL);
+	i= (int)floor(u);
-	do_float= (out->rect_float != NULL);
+	j= (int)floor(v);
+	a= u - i;
+	b= v - j;
 
-	i= (int)floor(x);
+	outR = outG = outB = outA = 0.0f;
-	j= (int)floor(y);
-	a= x - i;
-	b= y - j;
 	
-	outR= 0.0f;
+/* Optimized and not so easy to read */
-	outG= 0.0f;
-	outB= 0.0f;
-	outA= 0.0f;
 	
 	/* avoid calling multiple times */
 	wy[0] = P(b-(-1));
@@ -137,14 +156,14 @@ void bicubic_interpolation(ImBuf *in, ImBuf *out, float x, float y, int xout, in
 					/* except that would call P() 16 times per pixel therefor pow() 64 times, better precalc these */
 					w = wx * wy[m+1];
 					
-					if (do_float) {
+					if (outF) {
 						dataF= in->rect_float + in->x * y1 * 4 + 4*x1;
 						outR+= dataF[0] * w;
 						outG+= dataF[1] * w;
 						outB+= dataF[2] * w;
 						outA+= dataF[3] * w;
 					}
-					if (do_rect) {
+					if (outI) {
 						dataI= (unsigned char*)in->rect + in->x * y1 * 4 + 4*x1;
 						outR+= dataI[0] * w;
 						outG+= dataI[1] * w;
@@ -155,15 +174,42 @@ void bicubic_interpolation(ImBuf *in, ImBuf *out, float x, float y, int xout, in
 			}
 		}
 	}
+
+/* Done with optimized part */
+	
+#if 0 
+	/* older, slower function, works the same as above */
+	for(n= -1; n<= 2; n++){
+		for(m= -1; m<= 2; m++){
+			x1= i+n;
+			y1= j+m;
+			if (x1>0 && x1 < in->x && y1>0 && y1<in->y) {
+				if (do_float) {
+					dataF= in->rect_float + in->x * y1 * 4 + 4*x1;
+					outR+= dataF[0] * P(n-a) * P(b-m);
+					outG+= dataF[1] * P(n-a) * P(b-m);
+					outB+= dataF[2] * P(n-a) * P(b-m);
+					outA+= dataF[3] * P(n-a) * P(b-m);
+				}
 				if (do_rect) {
-		outI= (unsigned char *)out->rect + out->x * yout * 4 + 4*xout;
+					dataI= (unsigned char*)in->rect + in->x * y1 * 4 + 4*x1;
+					outR+= dataI[0] * P(n-a) * P(b-m);
+					outG+= dataI[1] * P(n-a) * P(b-m);
+					outB+= dataI[2] * P(n-a) * P(b-m);
+					outA+= dataI[3] * P(n-a) * P(b-m);
+				}
+			}
+		}
+	}
+#endif
+	
+	if (outI) {
 		outI[0]= (int)outR;
 		outI[1]= (int)outG;
 		outI[2]= (int)outB;
 		outI[3]= (int)outA;
 	}
-	if (do_float) {
+	if (outF) {
-		outF= (float *)out->rect_float + out->x * yout * 4 + 4*xout;
 		outF[0]= outR;
 		outF[1]= outG;
 		outF[2]= outB;
@@ -171,23 +217,33 @@ void bicubic_interpolation(ImBuf *in, ImBuf *out, float x, float y, int xout, in
 	}
 }
 
+
+void bicubic_interpolation(ImBuf *in, ImBuf *out, float u, float v, int xout, int yout)
+{
+	
+	unsigned char *outI = NULL;
+	float *outF = NULL;
+	
+	if (in == NULL || (in->rect == NULL && in->rect_float == NULL)) return;
+	
+	pixel_from_buffer(out, outI, outF, xout, yout); /* gcc warns these could be uninitialized, but its ok */
+	
+	bicubic_interpolation_color(in, outI, outF, u, v);
+}
+
 /* function assumes out to be zero'ed, only does RGBA */
 /* BILINEAR INTERPOLATION */
-void bilinear_interpolation(ImBuf *in, ImBuf *out, float u, float v, int xout, int yout)
+void bilinear_interpolation_color(struct ImBuf *in, unsigned char *outI, float *outF, float u, float v)
 {
-	float *row1, *row2, *row3, *row4, a, b, *outF;
+	float *row1, *row2, *row3, *row4, a, b;
-	unsigned char *row1I, *row2I, *row3I, *row4I, *outI;
+	unsigned char *row1I, *row2I, *row3I, *row4I;
 	float a_b, ma_b, a_mb, ma_mb;
 	float empty[4]= {0.0f, 0.0f, 0.0f, 0.0f};
 	unsigned char emptyI[4]= {0, 0, 0, 0};
 	int y1, y2, x1, x2;
-	int do_rect, do_float;
 	
-	if (in==NULL) return;
-	if (in->rect==NULL && in->rect_float==NULL) return;
 	
-	do_rect= (out->rect != NULL);
+	/* ImBuf in must have a valid rect or rect_float, assume this is alredy checked */
-	do_float= (out->rect_float != NULL);
 
 	x1= (int)floor(u);
 	x2= (int)ceil(u);
@@ -197,16 +253,7 @@ void bilinear_interpolation(ImBuf *in, ImBuf *out, float u, float v, int xout, i
 	// sample area entirely outside image? 
 	if (x2<0 || x1>in->x-1 || y2<0 || y1>in->y-1) return;
 
-	if (do_rect)
+	if (outF) {
-		outI=(unsigned char *)out->rect + out->x * yout * 4 + 4*xout;
-	else
-		outI= NULL;
-	if (do_float)
-		outF=(float *)out->rect_float + out->x * yout * 4 + 4*xout;
-	else	
-		outF= NULL;
-
-	if (do_float) {
 		// sample including outside of edges of image 
 		if (x1<0 || y1<0) row1= empty;
 		else row1= (float *)in->rect_float + in->x * y1 * 4 + 4*x1;
@@ -229,7 +276,7 @@ void bilinear_interpolation(ImBuf *in, ImBuf *out, float u, float v, int xout, i
 		outF[2]= ma_mb*row1[2] + a_mb*row3[2] + ma_b*row2[2]+ a_b*row4[2];
 		outF[3]= ma_mb*row1[3] + a_mb*row3[3] + ma_b*row2[3]+ a_b*row4[3];
 	}
-	if (do_rect) {
+	if (outI) {
 		// sample including outside of edges of image 
 		if (x1<0 || y1<0) row1I= emptyI;
 		else row1I= (unsigned char *)in->rect + in->x * y1 * 4 + 4*x1;
@@ -254,45 +301,44 @@ void bilinear_interpolation(ImBuf *in, ImBuf *out, float u, float v, int xout, i
 	}
 }
 
+void bilinear_interpolation(ImBuf *in, ImBuf *out, float u, float v, int xout, int yout)
+{
+	
+	unsigned char *outI = NULL;
+	float *outF = NULL;
+	
+	if (in == NULL || (in->rect == NULL && in->rect_float == NULL)) return;
+	
+	pixel_from_buffer(out, outI, outF, xout, yout); /* gcc warns these could be uninitialized, but its ok */
+	
+	bilinear_interpolation_color(in, outI, outF, u, v);
+}
+
 /* function assumes out to be zero'ed, only does RGBA */
 /* NEAREST INTERPOLATION */
-void neareast_interpolation(ImBuf *in, ImBuf *out, float u, float v,int xout, int yout)
+void neareast_interpolation_color(struct ImBuf *in, unsigned char *outI, float *outF, float u, float v)
 {
-	float *outF,*dataF;
+	float *dataF;
-	unsigned char *dataI,*outI;
+	unsigned char *dataI;
 	int y1, x1;
-	int do_rect, do_float;
 
-	if (in==NULL) return;
+	/* ImBuf in must have a valid rect or rect_float, assume this is alredy checked */
-	if (in->rect==NULL && in->rect_float==NULL) return;
-
-	do_rect= (out->rect != NULL);
-	do_float= (out->rect_float != NULL);
 	
 	x1= (int)(u);
 	y1= (int)(v);
 
-	if (do_rect)
-		outI=(unsigned char *)out->rect + out->x * yout * 4 + 4*xout;
-	else
-		outI= NULL;
-	if (do_float)
-		outF=(float *)out->rect_float + out->x * yout * 4 + 4*xout;
-	else
-		outF= NULL;
-
 	// sample area entirely outside image? 
 	if (x1<0 || x1>in->x-1 || y1<0 || y1>in->y-1) return;
 	
 	// sample including outside of edges of image 
 	if (x1<0 || y1<0) {
-		if (do_rect) {
+		if (outI) {
 			outI[0]= 0;
 			outI[1]= 0;
 			outI[2]= 0;
 			outI[3]= 0;
 		}
-		if (do_float) {
+		if (outF) {
 			outF[0]= 0.0f;
 			outF[1]= 0.0f;
 			outF[2]= 0.0f;
@@ -300,14 +346,14 @@ void neareast_interpolation(ImBuf *in, ImBuf *out, float u, float v,int xout, in
 		}
 	} else {
 		dataI= (unsigned char *)in->rect + in->x * y1 * 4 + 4*x1;
-		if (do_rect) {
+		if (outI) {
 			outI[0]= dataI[0];
 			outI[1]= dataI[1];
 			outI[2]= dataI[2];
 			outI[3]= dataI[3];
 		}
 		dataF= in->rect_float + in->x * y1 * 4 + 4*x1;
-		if (do_float) {
+		if (outF) {
 			outF[0]= dataF[0];
 			outF[1]= dataF[1];
 			outF[2]= dataF[2];
@@ -315,3 +361,16 @@ void neareast_interpolation(ImBuf *in, ImBuf *out, float u, float v,int xout, in
 		}
 	}	
 }
+
+void neareast_interpolation(ImBuf *in, ImBuf *out, float x, float y, int xout, int yout)
+{
+	
+	unsigned char *outI = NULL;
+	float *outF = NULL;
+
+	if (in == NULL || (in->rect == NULL && in->rect_float == NULL)) return;
+	
+	pixel_from_buffer(out, outI, outF, xout, yout); /* gcc warns these could be uninitialized, but its ok */
+	
+	neareast_interpolation_color(in, outI, outF, x, y);
+}

source/blender/makesdna/intern/SConscript

@@ -36,7 +36,7 @@ if not (root_build_dir[0]==os.sep or root_build_dir[1]==':'):
 	targetdir = '#'+targetdir
 makesdna_tool.Append (LIBPATH = targetdir)
 if env['BF_PROFILE']:
-	makesdna_tool.Append (LINKFLAGS = env['BF_PROFILE_FLAGS'])
+	makesdna_tool.Append (LINKFLAGS = env['BF_PROFILE_LINKFLAGS'])
 
 targetdir = root_build_dir + '/makesdna'
 

source/gameengine/Rasterizer/RAS_2DFilterManager.cpp

@@ -410,7 +410,7 @@ void RAS_2DFilterManager::RenderFilters(RAS_ICanvas* canvas)
 	if(canvaswidth != canvas->GetWidth() || canvasheight != canvas->GetHeight())
 	{
 		UpdateOffsetMatrix(canvas);
-		UpdateCanvasTextureCoord(viewport);
+		UpdateCanvasTextureCoord((unsigned int*)viewport);
 		need_tex_update = true;
 	}
 	

tools/Blender.py

@@ -190,7 +190,7 @@ def setup_syslibs(lenv):
 	if lenv['OURPLATFORM'] in ('win32-vc', 'win32-mingw','linuxcross'):
 		syslibs += Split(lenv['BF_PTHREADS_LIB'])
 
-	syslibs += Split(lenv['LLIBS'])
+	syslibs += lenv['LLIBS']
 
 	return syslibs
 
@@ -476,7 +476,7 @@ class BlenderEnvironment(SConsEnvironment):
 				lenv.Append(LINKFLAGS = lenv['BF_PYTHON_LINKFLAGS'])
 			lenv.Append(LINKFLAGS = lenv['BF_OPENGL_LINKFLAGS'])
 		if lenv['BF_PROFILE']:
-				lenv.Append(LINKFLAGS = lenv['BF_PROFILE_FLAGS'])
+			lenv.Append(LINKFLAGS = lenv['BF_PROFILE_LINKFLAGS'])
 		lenv.Append(CPPPATH=includes)
 		if root_build_dir[0]==os.sep or root_build_dir[1]==':':
 			lenv.Append(LIBPATH=root_build_dir + '/lib')

tools/btools.py

@@ -19,13 +19,15 @@ BoolVariable = SCons.Variables.BoolVariable
 def print_arguments(args, bc):
 	if len(args):
 		for k,v in args.iteritems():
+			if type(v)==list:
+				v = ' '.join(v)
 			print '\t'+bc.OKBLUE+k+bc.ENDC+' = '+bc.OKGREEN + v + bc.ENDC
 	else:
 		print '\t'+bc.WARNING+'No  command-line arguments given'+bc.ENDC
 
 def validate_arguments(args, bc):
 	opts_list = [
-			'WITH_BF_PYTHON', 'BF_PYTHON', 'BF_PYTHON_VERSION', 'BF_PYTHON_INC', 'BF_PYTHON_BINARY', 'BF_PYTHON_LIB', 'BF_PYTHON_LIBPATH', 'BF_PYTHON_LINKFLAGS', 'WITH_BF_STATICPYTHON', 'BF_PYTHON_LIB_STATIC',
+			'WITH_BF_PYTHON', 'BF_PYTHON', 'BF_PYTHON_VERSION', 'BF_PYTHON_INC', 'BF_PYTHON_BINARY', 'BF_PYTHON_LIB', 'BF_PYTHON_LIBPATH', 'WITH_BF_STATICPYTHON', 'BF_PYTHON_LIB_STATIC',
 			'WITH_BF_OPENAL', 'BF_OPENAL', 'BF_OPENAL_INC', 'BF_OPENAL_LIB', 'BF_OPENAL_LIBPATH', 'WITH_BF_STATICOPENAL', 'BF_OPENAL_LIB_STATIC',
 			'WITH_BF_SDL', 'BF_SDL', 'BF_SDL_INC', 'BF_SDL_LIB', 'BF_SDL_LIBPATH',
 			'BF_PTHREADS', 'BF_PTHREADS_INC', 'BF_PTHREADS_LIB', 'BF_PTHREADS_LIBPATH',
@@ -47,17 +49,11 @@ def validate_arguments(args, bc):
 			'WITH_BF_YAFRAY',
 			'WITH_BF_FREETYPE', 'BF_FREETYPE', 'BF_FREETYPE_INC', 'BF_FREETYPE_LIB', 'BF_FREETYPE_LIBPATH',
 			'WITH_BF_QUICKTIME', 'BF_QUICKTIME', 'BF_QUICKTIME_INC', 'BF_QUICKTIME_LIB', 'BF_QUICKTIME_LIBPATH',
-			'WITH_BF_STATICOPENGL', 'BF_OPENGL', 'BF_OPENGL_INC', 'BF_OPENGL_LIB', 'BF_OPENGL_LIBPATH', 'BF_OPENGL_LIB_STATIC', 'BF_OPENGL_LINKFLAGS',
+			'WITH_BF_STATICOPENGL', 'BF_OPENGL', 'BF_OPENGL_INC', 'BF_OPENGL_LIB', 'BF_OPENGL_LIBPATH', 'BF_OPENGL_LIB_STATIC',
 			'WITH_BF_FTGL', 'BF_FTGL', 'BF_FTGL_INC', 'BF_FTGL_LIB',
 			'WITH_BF_PLAYER',
 			'WITH_BF_NOBLENDER',
 			'WITH_BF_BINRELOC',
-			'CFLAGS', 'CCFLAGS', 'CXXFLAGS', 'CPPFLAGS',
-			'REL_CFLAGS', 'REL_CCFLAGS', 'REL_CXXFLAGS',
-			'BF_PROFILE_FLAGS', 'BF_PROFILE_FLAGS', 'BF_PROFILE_CXXFLAGS',
-			'BF_DEBUG_CFLAGS', 'BF_DEBUG_CCFLAGS', 'BF_DEBUG_CXXFLAGS',
-			'C_WARN', 'CC_WARN', 'CXX_WARN',
-			'LLIBS', 'PLATFORM_LINKFLAGS',
 			'LCGDIR',
 			'BF_CXX', 'WITH_BF_STATICCXX', 'BF_CXX_LIB_STATIC',
 			'WITH_BF_VERSE', 'BF_VERSE_INCLUDE',
@@ -73,6 +69,19 @@ def validate_arguments(args, bc):
 			'BF_NUMJOBS',
 			]
 	
+	# Have options here that scons expects to be lists
+	opts_list_split = [
+			'BF_PYTHON_LINKFLAGS',
+			'BF_OPENGL_LINKFLAGS',
+			'CFLAGS', 'CCFLAGS', 'CXXFLAGS', 'CPPFLAGS',
+			'REL_CFLAGS', 'REL_CCFLAGS', 'REL_CXXFLAGS',
+			'BF_PROFILE_CFLAGS', 'BF_PROFILE_CCFLAGS', 'BF_PROFILE_CXXFLAGS', 'BF_PROFILE_LINKFLAGS',
+			'BF_DEBUG_CFLAGS', 'BF_DEBUG_CCFLAGS', 'BF_DEBUG_CXXFLAGS',
+			'C_WARN', 'CC_WARN', 'CXX_WARN',
+			'LLIBS', 'PLATFORM_LINKFLAGS',
+	]
+	
+	
 	arg_list = ['BF_DEBUG', 'BF_QUIET', 'BF_CROSS', 'BF_UPDATE',
 			'BF_INSTALLDIR', 'BF_TOOLSET', 'BF_BINNAME',
 			'BF_BUILDDIR', 'BF_FANCY', 'BF_QUICK', 'BF_PROFILE',
@@ -81,12 +90,13 @@ def validate_arguments(args, bc):
 			'BF_LISTDEBUG', 'LCGDIR', 'BF_X264_CONFIG', 'BF_XVIDCORE_CONFIG',
 			'BF_DOCDIR']
 
-	all_list = opts_list + arg_list
 	okdict = {}
 
 	for k,v in args.iteritems():
-		if k in all_list:
+		if (k in opts_list) or (k in arg_list):
 			okdict[k] = v
+		elif k in opts_list_split:
+			okdict[k] = v.split() # "" have alredy been stripped
 		else:
 			print '\t'+bc.WARNING+'Invalid argument: '+bc.ENDC+k+'='+v
 
@@ -340,6 +350,7 @@ def read_opts(cfg, args):
 		('BF_PROFILE_CFLAGS', 'C only profiling flags', ''),
 		('BF_PROFILE_CCFLAGS', 'C and C++ profiling flags', ''),
 		('BF_PROFILE_CXXFLAGS', 'C++ only profiling flags', ''),
+		('BF_PROFILE_LINKFLAGS', 'Profile linkflags', ''),
 
 		(BoolVariable('BF_DEBUG', 'Add debug flags if true', False)),
 		('BF_DEBUG_CFLAGS', 'C only debug flags', ''),