forked from bartvdbraak/blender
Updated and extended Regression Testing frameworks (Gsoc 2020)
This revision contains the following changes- - Updated the existing testing framework for Modifiers for Regression Testing. - Tests for Physics modifiers and remaining Generate and Deform modifiers are added. - The existing `ModifierSpec` is updated with backward compatibility to support Physics Modifiers. - Now there is support for frame number and giving nested parameters for attributes. - Some Deform modifiers required Object Operators, e.g. "Bind" in Mesh Deform, so a new class was added to support that functionality. - A separate class for holding Particles System, they are tested by converting all the particles to mesh and joining it to the mesh they were added. - Updated the format to add tests for Bevel, Boolean and Operators as well. Reviewed By: zazizizou, mont29, campbellbarton Differential Revision: https://developer.blender.org/D8507
This commit is contained in:
parent
fed995ced5
commit
e7b698327c
@ -204,6 +204,48 @@ add_blender_test(
|
||||
--run-all-tests
|
||||
)
|
||||
|
||||
add_blender_test(
|
||||
physics_dynamic_paint
|
||||
${TEST_SRC_DIR}/physics/dynamic_paint_test.blend
|
||||
--python ${TEST_PYTHON_DIR}/physics_dynamic_paint.py
|
||||
--
|
||||
--run-all-tests
|
||||
)
|
||||
|
||||
add_blender_test(
|
||||
deform_modifiers
|
||||
${TEST_SRC_DIR}/modeling/deform_modifiers.blend
|
||||
--python ${TEST_PYTHON_DIR}/deform_modifiers.py
|
||||
--
|
||||
--run-all-tests
|
||||
)
|
||||
|
||||
add_blender_test(
|
||||
physics_ocean
|
||||
${TEST_SRC_DIR}/physics/ocean_test.blend
|
||||
--python ${TEST_PYTHON_DIR}/physics_ocean.py
|
||||
--
|
||||
--run-all-tests
|
||||
)
|
||||
|
||||
|
||||
add_blender_test(
|
||||
physics_particle_system
|
||||
${TEST_SRC_DIR}/physics/physics_particle_test.blend
|
||||
--python ${TEST_PYTHON_DIR}/physics_particle_system.py
|
||||
--
|
||||
--run-all-tests
|
||||
)
|
||||
|
||||
# Particle Instance disabling currently broken in master
|
||||
# add_blender_test(
|
||||
# physics_particle_instance
|
||||
# ${TEST_SRC_DIR}/physics/physics_particle_instance.blend
|
||||
# --python ${TEST_PYTHON_DIR}/physics_particle_instance.py
|
||||
# --
|
||||
# --run-all-tests
|
||||
# )
|
||||
|
||||
add_blender_test(
|
||||
constraints
|
||||
--python ${CMAKE_CURRENT_LIST_DIR}/bl_constraints.py
|
||||
|
@ -27,151 +27,287 @@ import os
|
||||
import sys
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import OperatorTest
|
||||
from modules.mesh_test import MeshTest, OperatorSpecEditMode, RunTest
|
||||
|
||||
|
||||
def main():
|
||||
tests = [
|
||||
# 0
|
||||
['EDGE', {10}, 'Cube_test', 'Cube_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {10, 7}, 'Cube_test', 'Cube_result_2', 'bevel', {'offset': 0.2, 'offset_type': 'WIDTH'}],
|
||||
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_3', 'bevel', {'offset': 0.2, 'offset_type': 'DEPTH'}],
|
||||
['EDGE', {10}, 'Cube_test', 'Cube_result_4', 'bevel', {'offset': 0.4, 'segments': 2}],
|
||||
['EDGE', {10, 7}, 'Cube_test', 'Cube_result_5', 'bevel', {'offset': 0.4, 'segments': 3}],
|
||||
# 5
|
||||
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_6', 'bevel', {'offset': 0.4, 'segments': 4}],
|
||||
['EDGE', {0, 10, 4, 7}, 'Cube_test', 'Cube_result_7', 'bevel', {'offset': 0.4, 'segments': 5, 'profile': 0.2}],
|
||||
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_8', 'bevel', {'offset': 0.4, 'segments': 5, 'profile': 0.25}],
|
||||
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_9', 'bevel', {'offset': 0.4, 'segments': 6, 'profile': 0.9}],
|
||||
['EDGE', {10, 7}, 'Cube_test', 'Cube_result_10', 'bevel', {'offset': 0.4, 'segments': 4, 'profile': 1.0}],
|
||||
# 10
|
||||
['EDGE', {8, 10, 7}, 'Cube_test', 'Cube_result_11', 'bevel', {'offset': 0.4, 'segments': 5, 'profile': 1.0}],
|
||||
['EDGE', {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 'Cube_test', 'Cube_result_12', 'bevel',
|
||||
{'offset': 0.4, 'segments': 8}],
|
||||
['EDGE', {5}, 'Pyr4_test', 'Pyr4_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {2, 5}, 'Pyr4_test', 'Pyr4_result_2', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {2, 3, 5}, 'Pyr4_test', 'Pyr4_result_3', 'bevel', {'offset': 0.2}],
|
||||
# 15
|
||||
['EDGE', {1, 2, 3, 5}, 'Pyr4_test', 'Pyr4_result_4', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {1, 2, 3, 5}, 'Pyr4_test', 'Pyr4_result_5', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['EDGE', {2, 3}, 'Pyr4_test', 'Pyr4_result_6', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {1, 2, 3, 5}, 'Pyr4_test', 'Pyr4_result_7', 'bevel', {'offset': 0.2, 'segments': 4, 'profile': 0.15}],
|
||||
['VERT', {1}, 'Pyr4_test', 'Pyr4_result_8', 'bevel', {'offset': 0.75, 'segments': 4, 'affect': 'VERTICES'}],
|
||||
# 20
|
||||
['VERT', {1}, 'Pyr4_test', 'Pyr4_result_9', 'bevel',
|
||||
{'offset': 0.75, 'segments': 3, 'affect': 'VERTICES', 'profile': 0.25}],
|
||||
['EDGE', {2, 3}, 'Pyr6_test', 'Pyr6_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {8, 2, 3}, 'Pyr6_test', 'Pyr6_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {0, 2, 3, 4, 6, 7, 9, 10, 11}, 'Pyr6_test', 'Pyr6_result_3', 'bevel',
|
||||
{'offset': 0.2, 'segments': 4, 'profile': 0.8}],
|
||||
['EDGE', {8, 9, 3, 11}, 'Sept_test', 'Sept_result_1', 'bevel', {'offset': 0.1}],
|
||||
# 25
|
||||
['EDGE', {8, 9, 11}, 'Sept_test', 'Sept_result_2', 'bevel', {'offset': 0.1, 'offset_type': 'WIDTH'}],
|
||||
['EDGE', {2, 8, 9, 12, 13, 14}, 'Saddle_test', 'Saddle_result_1', 'bevel', {'offset': 0.3, 'segments': 5}],
|
||||
['VERT', {4}, 'Saddle_test', 'Saddle_result_2', 'bevel', {'offset': 0.6, 'segments': 6, 'affect': 'VERTICES'}],
|
||||
['EDGE', {2, 5, 8, 11, 14, 18, 21, 24, 27, 30, 34, 37, 40, 43, 46, 50, 53, 56, 59, 62, 112, 113, 114, 115},
|
||||
'Bent_test', 'Bent_result_1', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['EDGE', {1, 8, 9, 10, 11}, 'Bentlines_test', 'Bentlines_result_1', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
# 30
|
||||
['EDGE', {26, 12, 20}, 'Flaretop_test', 'Flaretop_result_1', 'bevel', {'offset': 0.4, 'segments': 2}],
|
||||
['EDGE', {26, 12, 20}, 'Flaretop_test', 'Flaretop_result_2', 'bevel',
|
||||
{'offset': 0.4, 'segments': 2, 'profile': 1.0}],
|
||||
['FACE', {1, 6, 7, 8, 9, 10, 11, 12}, 'Flaretop_test', 'Flaretop_result_3', 'bevel',
|
||||
{'offset': 0.4, 'segments': 4}],
|
||||
['EDGE', {4, 8, 10, 18, 24}, 'BentL_test', 'BentL_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {0, 1, 2, 10}, 'Wires_test', 'Wires_test_result_1', 'bevel', {'offset': 0.3}],
|
||||
# 35
|
||||
['VERT', {0, 1, 2, 3, 4, 5, 6, 7, 8, 9}, 'Wires_test', 'Wires_test_result_2', 'bevel',
|
||||
{'offset': 0.3, 'affect': 'VERTICES'}],
|
||||
['EDGE', {3, 4, 5}, 'tri', 'tri_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {3, 4, 5}, 'tri', 'tri_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {3, 4, 5}, 'tri', 'tri_result_3', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['EDGE', {3, 4}, 'tri', 'tri_result_4', 'bevel', {'offset': 0.2}],
|
||||
# 40
|
||||
['EDGE', {3, 4}, 'tri', 'tri_result_5', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['VERT', {3}, 'tri', 'tri_result_6', 'bevel', {'offset': 0.2, 'affect': 'VERTICES'}],
|
||||
['VERT', {3}, 'tri', 'tri_result_7', 'bevel', {'offset': 0.2, 'segments': 2, 'affect': 'VERTICES'}],
|
||||
['VERT', {3}, 'tri', 'tri_result_8', 'bevel', {'offset': 0.2, 'segments': 3, 'affect': 'VERTICES'}],
|
||||
['VERT', {1}, 'tri', 'tri_result_9', 'bevel', {'offset': 0.2, 'affect': 'VERTICES'}],
|
||||
# 45
|
||||
['EDGE', {3, 4, 5}, 'tri1gap', 'tri1gap_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {3, 4, 5}, 'tri1gap', 'tri1gap_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {3, 4, 5}, 'tri1gap', 'tri1gap_result_3', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['EDGE', {3, 4}, 'tri1gap', 'tri1gap_result_4', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {3, 4}, 'tri1gap', 'tri1gap_result_5', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
# 50
|
||||
['EDGE', {3, 4}, 'tri1gap', 'tri1gap_result_6', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['EDGE', {3, 5}, 'tri1gap', 'tri1gap_result_7', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {3, 5}, 'tri1gap', 'tri1gap_result_8', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {3, 5}, 'tri1gap', 'tri1gap_result_9', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['VERT', {3}, 'tri1gap', 'tri1gap_result_10', 'bevel', {'offset': 0.2, 'affect': 'VERTICES'}],
|
||||
# 55
|
||||
['EDGE', {3, 4, 5}, 'tri2gaps', 'tri2gaps_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {3, 4, 5}, 'tri2gaps', 'tri2gaps_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {3, 4, 5}, 'tri2gaps', 'tri2gaps_result_3', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['EDGE', {3, 4}, 'tri2gaps', 'tri2gaps_result_4', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {3, 4}, 'tri2gaps', 'tri2gaps_result_5', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
# 60
|
||||
['EDGE', {3, 4}, 'tri2gaps', 'tri2gaps_result_6', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['EDGE', {3, 4, 5}, 'tri3gaps', 'tri3gaps_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {3, 4, 5}, 'tri3gaps', 'tri3gaps_result_2', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {3, 4, 5}, 'tri3gaps', 'tri3gaps_result_3', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
['EDGE', {32, 33, 34, 35, 24, 25, 26, 27, 28, 29, 30, 31}, 'cube3', 'cube3_result_1', 'bevel', {'offset': 0.2}],
|
||||
# 65
|
||||
['EDGE', {32, 33, 34, 35, 24, 25, 26, 27, 28, 29, 30, 31}, 'cube3', 'cube3_result_2', 'bevel',
|
||||
{'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {32, 35}, 'cube3', 'cube3_result_3', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {24, 35}, 'cube3', 'cube3_result_4', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {24, 32, 35}, 'cube3', 'cube3_result_5', 'bevel', {'offset': 0.2, 'segments': 2}],
|
||||
['EDGE', {24, 32, 35}, 'cube3', 'cube3_result_6', 'bevel', {'offset': 0.2, 'segments': 3}],
|
||||
# 70
|
||||
['EDGE', {0, 1, 6, 7, 12, 14, 16, 17}, 'Tray', 'Tray_result_1', 'bevel', {'offset': 0.01, 'segments': 2}],
|
||||
['EDGE', {33, 4, 38, 8, 41, 10, 42, 12, 14, 17, 24, 31}, 'Bumptop', 'Bumptop_result_1', 'bevel',
|
||||
{'offset': 0.1, 'segments': 4}],
|
||||
['EDGE', {16, 14, 15}, 'Multisegment_test', 'Multisegment_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {16, 14, 15}, 'Multisegment_test', 'Multisegment_result_1', 'bevel', {'offset': 0.2}],
|
||||
['EDGE', {19, 20, 23, 15}, 'Window_test', 'Window_result_1', 'bevel', {'offset': 0.05, 'segments': 2}],
|
||||
# 75
|
||||
['EDGE', {8}, 'Cube_hn_test', 'Cube_hn_result_1', 'bevel', {'offset': 0.2, 'harden_normals': True}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_1', 'bevel',
|
||||
{'offset': 0.2, 'miter_outer': 'PATCH'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_2', 'bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'PATCH'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_3', 'bevel',
|
||||
{'offset': 0.2, 'segments': 3, 'miter_outer': 'PATCH'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_4', 'bevel',
|
||||
{'offset': 0.2, 'miter_outer': 'ARC'}],
|
||||
# 80
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_5', 'bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_6', 'bevel',
|
||||
{'offset': 0.2, 'segments': 3, 'miter_outer': 'ARC'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_7', 'bevel',
|
||||
{'offset': 0.2, 'miter_outer': 'PATCH', 'miter_inner': 'ARC'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps_test', 'Blocksteps_result_8', 'bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'PATCH', 'miter_inner': 'ARC'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps2_test', 'Blocksteps2_result_9', 'bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}],
|
||||
# 85
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps3_test', 'Blocksteps3_result_10', 'bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps4_test', 'Blocksteps4_result_11', 'bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}],
|
||||
['EDGE', {4, 7, 39, 27, 30, 31}, 'Blocksteps4_test', 'Blocksteps4_result_12', 'bevel',
|
||||
{'offset': 0.2, 'segments': 3, 'miter_outer': 'ARC'}],
|
||||
['EDGE', {1, 7}, 'Spike_test', 'Spike_result_1', 'bevel', {'offset': 0.2, 'segments': 3}]
|
||||
]
|
||||
MeshTest('Cube_test_1', 'Cube_test', 'Cube_result_1',
|
||||
|
||||
operator_test = OperatorTest(tests)
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2}, 'EDGE', {10})]),
|
||||
MeshTest('Cube_test_2', 'Cube_test', 'Cube_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'offset_type': 'WIDTH'}, 'EDGE', {10, 7}, )]),
|
||||
MeshTest('Cube_test_3', 'Cube_test', 'Cube_result_3',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'offset_type': 'DEPTH'}, 'EDGE', {8, 10, 7}, )]),
|
||||
MeshTest('Cube_test_4', 'Cube_test', 'Cube_result_4',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.4, 'segments': 2}, 'EDGE', {10}, )]),
|
||||
MeshTest('Cube_test_5', 'Cube_test', 'Cube_result_5',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.4, 'segments': 3}, 'EDGE', {10, 7}, )]),
|
||||
# 5
|
||||
MeshTest('Cube_test_6', 'Cube_test', 'Cube_result_6',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.4, 'segments': 4}, 'EDGE', {8, 10, 7}, )]),
|
||||
MeshTest('Cube_test_7', 'Cube_test', 'Cube_result_7',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 5, 'profile': 0.2}, 'EDGE', {0, 10, 4, 7}, )]),
|
||||
MeshTest('Cube_test_8', 'Cube_test', 'Cube_result_8',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 5, 'profile': 0.25}, 'EDGE', {8, 10, 7}, )]),
|
||||
MeshTest('Cube_test_9', 'Cube_test', 'Cube_result_9',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 6, 'profile': 0.9}, 'EDGE', {8, 10, 7}, )]),
|
||||
MeshTest('Cube_test_10', 'Cube_test', 'Cube_result_10',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 4, 'profile': 1.0}, 'EDGE', {10, 7}, )]),
|
||||
# 10
|
||||
MeshTest('Cube_test_11', 'Cube_test', 'Cube_result_11',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 5, 'profile': 1.0}, 'EDGE', {8, 10, 7}, )]),
|
||||
MeshTest("test 12", 'Cube_test', 'Cube_result_12',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 8}, 'EDGE',
|
||||
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, )]),
|
||||
MeshTest('Pyramid4_test_1', 'Pyr4_test', 'Pyr4_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {5}, )]),
|
||||
MeshTest('Pyramid4_test_2', 'Pyr4_test', 'Pyr4_result_2',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {2, 5}, )]),
|
||||
MeshTest('Pyramid4_test_3', 'Pyr4_test', 'Pyr4_result_3',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {2, 3, 5}, )]),
|
||||
# 15
|
||||
MeshTest('Pyramid4_test_4', 'Pyr4_test', 'Pyr4_result_4',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {1, 2, 3, 5}, )]),
|
||||
MeshTest('Pyramid4_test_5', 'Pyr4_test', 'Pyr4_result_5',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 3}, 'EDGE', {1, 2, 3, 5}, )]),
|
||||
MeshTest('Pyramid4_test_6', 'Pyr4_test', 'Pyr4_result_6',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {2, 3}, )]),
|
||||
MeshTest('Pyramid4_test_7', 'Pyr4_test', 'Pyr4_result_7',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 4, 'profile': 0.15}, 'EDGE', {1, 2, 3, 5}, )]),
|
||||
MeshTest('Pyramid4_test_8', 'Pyr4_test', 'Pyr4_result_8',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.75, 'segments': 4, 'affect': 'VERTICES'}, 'VERT', {1}, )]),
|
||||
# 20
|
||||
MeshTest('Pyramid4_test_9', 'Pyr4_test', 'Pyr4_result_9',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.75, 'segments': 3, 'affect': 'VERTICES', 'profile': 0.25}, 'VERT',
|
||||
{1}, )]),
|
||||
MeshTest('Pyramid6_test_1', 'Pyr6_test', 'Pyr6_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {2, 3}, )]),
|
||||
MeshTest('Pyramid6_test_2', 'Pyr6_test', 'Pyr6_result_2',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {8, 2, 3}, )]),
|
||||
MeshTest('Pyramid6_test_3', 'Pyr6_test', 'Pyr6_result_3',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 4, 'profile': 0.8}, 'EDGE',
|
||||
{0, 2, 3, 4, 6, 7, 9, 10, 11}, )]),
|
||||
MeshTest('Sept_test_1', 'Sept_test', 'Sept_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.1}, 'EDGE', {8, 9, 3, 11}, )]),
|
||||
# 25
|
||||
MeshTest('Sept_test_2', 'Sept_test', 'Sept_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.1, 'offset_type': 'WIDTH'}, 'EDGE', {8, 9, 11}, )]),
|
||||
MeshTest('Saddle_test_1', 'Saddle_test', 'Saddle_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.3, 'segments': 5}, 'EDGE', {2, 8, 9, 12, 13, 14}, )]),
|
||||
MeshTest('Saddle_test_2', 'Saddle_test', 'Saddle_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.6, 'segments': 6, 'affect': 'VERTICES'}, 'VERT', {4}, )]),
|
||||
|
||||
MeshTest('Bent_test', 'Bent_test', 'Bent_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 3},
|
||||
'EDGE',
|
||||
{2, 5, 8, 11, 14, 18, 21, 24, 27, 30, 34, 37, 40, 43, 46, 50, 53, 56, 59, 62,
|
||||
112, 113, 114, 115}, )]),
|
||||
MeshTest('Bentlines_test_1', 'Bentlines_test', 'Bentlines_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 3}, 'EDGE', {1, 8, 9, 10, 11}, )]),
|
||||
# 30
|
||||
MeshTest('Flaretop_test_1', 'Flaretop_test', 'Flaretop_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 2}, 'EDGE', {26, 12, 20}, )]),
|
||||
MeshTest('Flaretop_test_2', 'Flaretop_test', 'Flaretop_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 2, 'profile': 1.0}, 'EDGE', {26, 12, 20}, )]),
|
||||
MeshTest('Flaretop_test_3', 'Flaretop_test', 'Flaretop_result_3',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.4, 'segments': 4}, 'FACE', {1, 6, 7, 8, 9, 10, 11, 12}, )]),
|
||||
MeshTest('BentL_test', 'BentL_test', 'BentL_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {4, 8, 10, 18, 24}, )]),
|
||||
MeshTest('Wires_test_1', 'Wires_test', 'Wires_test_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.3}, 'EDGE', {0, 1, 2, 10}, )]),
|
||||
# 35
|
||||
MeshTest('Wires_test_2', 'Wires_test', 'Wires_test_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.3, 'affect': 'VERTICES'}, 'VERT',
|
||||
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9}, )]),
|
||||
MeshTest('tri_test_1', 'tri', 'tri_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri_test_2', 'tri', 'tri_result_2',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri_test_3', 'tri', 'tri_result_3',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 3}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri_test_4', 'tri', 'tri_result_4',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {3, 4}, )]),
|
||||
# 40
|
||||
MeshTest('tri_test_5', 'tri', 'tri_result_5',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {3, 4}, )]),
|
||||
MeshTest('tri_test_6', 'tri', 'tri_result_6',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'affect': 'VERTICES'}, 'VERT', {3}, )]),
|
||||
MeshTest('tri_test_7', 'tri', 'tri_result_7',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'affect': 'VERTICES'}, 'VERT', {3}, )]),
|
||||
MeshTest('tri_test_8', 'tri', 'tri_result_8',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 3, 'affect': 'VERTICES'}, 'VERT', {3}, )]),
|
||||
MeshTest('tri_test_9', 'tri', 'tri_result_9',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'affect': 'VERTICES'}, 'VERT', {1}, )]),
|
||||
# 45
|
||||
MeshTest('tri1gap_test_2', 'tri1gap', 'tri1gap_result_2',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri1gap_test_3', 'tri1gap', 'tri1gap_result_3',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 3}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri1gap_test_1', 'tri1gap', 'tri1gap_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri1gap_test_4', 'tri1gap', 'tri1gap_result_4',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {3, 4}, )]),
|
||||
MeshTest('tri1gap_test_5', 'tri1gap', 'tri1gap_result_5',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {3, 4}, )]),
|
||||
# 50
|
||||
MeshTest('tri1gap_test_6', 'tri1gap', 'tri1gap_result_6',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 3}, 'EDGE', {3, 4}, )]),
|
||||
MeshTest('tri1gap_test_7', 'tri1gap', 'tri1gap_result_7',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {3, 5}, )]),
|
||||
MeshTest('tri1gap_test_8', 'tri1gap', 'tri1gap_result_8',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {3, 5}, )]),
|
||||
MeshTest('tri1gap_test_9', 'tri1gap', 'tri1gap_result_9',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 3}, 'EDGE', {3, 5}, )]),
|
||||
MeshTest('tri1gap_test_10', 'tri1gap', 'tri1gap_result_10',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'affect': 'VERTICES'}, 'VERT', {3}, )]),
|
||||
# 55
|
||||
MeshTest('tri2gaps_test_1', 'tri2gaps', 'tri2gaps_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri2gaps_test_2', 'tri2gaps', 'tri2gaps_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri2gaps_test_3', 'tri2gaps', 'tri2gaps_result_3',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 3}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri2gaps_test_4', 'tri2gaps', 'tri2gaps_result_4',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {3, 4}, )]),
|
||||
MeshTest('tri2gaps_test_5', 'tri2gaps', 'tri2gaps_result_5',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {3, 4}, )]),
|
||||
# 60
|
||||
MeshTest('tri2gaps_test_6', 'tri2gaps', 'tri2gaps_result_6',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 3}, 'EDGE', {3, 4}, )]),
|
||||
MeshTest('tri3gaps_test_1', 'tri3gaps', 'tri3gaps_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri3gaps_test_2', 'tri3gaps', 'tri3gaps_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('tri3gaps_test_3', 'tri3gaps', 'tri3gaps_result_3',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 3}, 'EDGE', {3, 4, 5}, )]),
|
||||
MeshTest('cube3_test_1', 'cube3', 'cube3_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2}, 'EDGE', {32, 33, 34, 35, 24, 25, 26, 27, 28, 29, 30, 31}, )]),
|
||||
# 65
|
||||
MeshTest('cube3_test_2', 'cube3', 'cube3_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2}, 'EDGE',
|
||||
{32, 33, 34, 35, 24, 25, 26, 27, 28, 29, 30, 31}, )]),
|
||||
MeshTest('cube3_test_3', 'cube3', 'cube3_result_3',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {32, 35}, )]),
|
||||
MeshTest('cube3_test_4', 'cube3', 'cube3_result_4',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2}, 'EDGE', {24, 35}, )]),
|
||||
MeshTest('cube3_test_5', 'cube3', 'cube3_result_5',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 2}, 'EDGE', {24, 32, 35}, )]),
|
||||
MeshTest('cube3_test_6', 'cube3', 'cube3_result_6',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 3}, 'EDGE', {24, 32, 35}, )]),
|
||||
# 70
|
||||
MeshTest('Tray', 'Tray', 'Tray_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.01, 'segments': 2}, 'EDGE', {0, 1, 6, 7, 12, 14, 16, 17}, )]),
|
||||
MeshTest("test 73", 'Bumptop', 'Bumptop_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.1, 'segments': 4}, 'EDGE',
|
||||
{33, 4, 38, 8, 41, 10, 42, 12, 14, 17, 24, 31}, )]),
|
||||
MeshTest('Multisegment_test_1', 'Multisegment_test', 'Multisegment_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2}, 'EDGE', {16, 14, 15}, )]),
|
||||
MeshTest('Window_test', 'Window_test', 'Window_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.05, 'segments': 2}, 'EDGE', {19, 20, 23, 15}, )]),
|
||||
# 75
|
||||
MeshTest("test 77", 'Cube_hn_test', 'Cube_hn_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'harden_normals': True}, 'EDGE', {8}, )]),
|
||||
MeshTest('Blocksteps_test_1', 'Blocksteps_test', 'Blocksteps_result_1',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'miter_outer': 'PATCH'}, 'EDGE', {4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Blocksteps_test_2', 'Blocksteps_test', 'Blocksteps_result_2',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'PATCH'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Blocksteps_test_3', 'Blocksteps_test', 'Blocksteps_result_3',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 3, 'miter_outer': 'PATCH'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Blocksteps_test_4', 'Blocksteps_test', 'Blocksteps_result_4',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'miter_outer': 'ARC'}, 'EDGE', {4, 7, 39, 27, 30, 31}, )]),
|
||||
# 80
|
||||
MeshTest('Blocksteps_test_5', 'Blocksteps_test', 'Blocksteps_result_5',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Blocksteps_test_6', 'Blocksteps_test', 'Blocksteps_result_6',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 3, 'miter_outer': 'ARC'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Blocksteps_test_7', 'Blocksteps_test', 'Blocksteps_result_7',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'miter_outer': 'PATCH', 'miter_inner': 'ARC'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest("Blocksteps_test_8", 'Blocksteps_test', 'Blocksteps_result_8',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'PATCH', 'miter_inner': 'ARC'},
|
||||
'EDGE', {4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Blocksteps2_test', 'Blocksteps2_test', 'Blocksteps2_result_9',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
# 85
|
||||
MeshTest('Blocksteps3_test', 'Blocksteps3_test', 'Blocksteps3_result_10',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Blocksteps4_test_1', 'Blocksteps4_test', 'Blocksteps4_result_11',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 2, 'miter_outer': 'ARC'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Blocksteps4_test_2', 'Blocksteps4_test', 'Blocksteps4_result_12',
|
||||
[OperatorSpecEditMode('bevel',
|
||||
{'offset': 0.2, 'segments': 3, 'miter_outer': 'ARC'}, 'EDGE',
|
||||
{4, 7, 39, 27, 30, 31}, )]),
|
||||
MeshTest('Spike_test', 'Spike_test', 'Spike_result_1',
|
||||
[OperatorSpecEditMode('bevel', {'offset': 0.2, 'segments': 3}, 'EDGE', {1, 7})])
|
||||
|
||||
]
|
||||
operator_test = RunTest(tests)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
operator_test.do_compare = True
|
||||
operator_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
index = int(command[i + 1])
|
||||
operator_test.run_test(index)
|
||||
name = command[i + 1]
|
||||
operator_test.do_compare = False
|
||||
operator_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
|
@ -29,33 +29,53 @@ import os
|
||||
import sys
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import OperatorTest
|
||||
from modules.mesh_test import MeshTest, OperatorSpecEditMode, RunTest
|
||||
|
||||
|
||||
def main():
|
||||
tests = [
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecube', 'Cubecube_result_1', 'intersect_boolean', {'operation': 'UNION', 'solver' : 'FAST'}],
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecube', 'Cubecube_result_2', 'intersect_boolean', {'operation': 'INTERSECT', 'solver' : 'FAST'}],
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecube', 'Cubecube_result_3', 'intersect_boolean', {'operation': 'DIFFERENCE', 'solver' : 'FAST'}],
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecube', 'Cubecube_result_4', 'intersect', {'separate_mode': 'CUT', 'solver' : 'FAST'}],
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecube', 'Cubecube_result_5', 'intersect', {'separate_mode': 'ALL', 'solver' : 'FAST'}],
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecube', 'Cubecube_result_6', 'intersect', {'separate_mode': 'NONE', 'solver' : 'FAST'}],
|
||||
['FACE', {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 'Cubecube', 'Cubecube_result_7', 'intersect',
|
||||
{'mode': 'SELECT', 'separate_mode': 'NONE', 'solver' : 'FAST'}],
|
||||
['FACE', {6, 7, 8, 9, 10}, 'Cubecone', 'Cubecone_result_1', 'intersect_boolean', {'operation': 'UNION', 'solver' : 'FAST'}],
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecones', 'Cubecones_result_1', 'intersect_boolean', {'operation': 'UNION', 'solver' : 'FAST'}],
|
||||
|
||||
MeshTest('Cubecube_intersect_union', 'Cubecube', 'Cubecube_result_1',
|
||||
[OperatorSpecEditMode('intersect_boolean',
|
||||
{'operation': 'UNION', 'solver': 'FAST'}, 'FACE', {0, 1, 2, 3, 4, 5}, )]),
|
||||
MeshTest('Cubecube_intersect_intersect', 'Cubecube', 'Cubecube_result_2',
|
||||
[OperatorSpecEditMode('intersect_boolean', {'operation': 'INTERSECT', 'solver': 'FAST'}, 'FACE', {0, 1, 2, 3, 4, 5}, )]),
|
||||
MeshTest('Cubecube_intersect_difference', 'Cubecube', 'Cubecube_result_3',
|
||||
[OperatorSpecEditMode('intersect_boolean', {'operation': 'DIFFERENCE', 'solver': 'FAST'}, 'FACE',
|
||||
{0, 1, 2, 3, 4, 5}, )]),
|
||||
MeshTest('Cubecube_intersect_cut', 'Cubecube', 'Cubecube_result_4', [OperatorSpecEditMode('intersect',
|
||||
{'separate_mode': 'CUT', 'solver': 'FAST'}, 'FACE', {0, 1, 2, 3, 4, 5}, )]),
|
||||
MeshTest('Cubecube_intersect_all', 'Cubecube', 'Cubecube_result_5',
|
||||
[OperatorSpecEditMode('intersect',
|
||||
{'separate_mode': 'ALL', 'solver': 'FAST'}, 'FACE', {0, 1, 2, 3, 4, 5}, )]),
|
||||
MeshTest('Cubecube_intersect_none', 'Cubecube', 'Cubecube_result_6',
|
||||
[OperatorSpecEditMode('intersect',
|
||||
{'separate_mode': 'NONE', 'solver': 'FAST'}, 'FACE', {0, 1, 2, 3, 4, 5}, )]),
|
||||
MeshTest('Cubecube_intersect_select_none', 'Cubecube',
|
||||
'Cubecube_result_7',
|
||||
[OperatorSpecEditMode('intersect',
|
||||
{'mode': 'SELECT', 'separate_mode': 'NONE', 'solver': 'FAST'}, 'FACE',
|
||||
{0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, )]),
|
||||
MeshTest('Cubecone_intersect_union', 'Cubecone', 'Cubecone_result_1',
|
||||
[OperatorSpecEditMode('intersect_boolean',
|
||||
{'operation': 'UNION', 'solver': 'FAST'}, 'FACE', {6, 7, 8, 9, 10}, )]),
|
||||
MeshTest('Cubecones_intersect_union', 'Cubecones', 'Cubecones_result_1',
|
||||
[OperatorSpecEditMode('intersect_boolean', {'operation': 'UNION', 'solver': 'FAST'}, 'FACE', {0, 1, 2, 3, 4, 5}, )]),
|
||||
|
||||
]
|
||||
|
||||
operator_test = OperatorTest(tests)
|
||||
operator_test = RunTest(tests)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
operator_test.do_compare = True
|
||||
operator_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
index = int(command[i + 1])
|
||||
operator_test.run_test(index)
|
||||
name = command[i + 1]
|
||||
operator_test.do_compare = False
|
||||
operator_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
|
119
tests/python/deform_modifiers.py
Normal file
119
tests/python/deform_modifiers.py
Normal file
@ -0,0 +1,119 @@
|
||||
# ##### BEGIN GPL LICENSE BLOCK #####
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License
|
||||
# as published by the Free Software Foundation; either version 2
|
||||
# of the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software Foundation,
|
||||
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
||||
#
|
||||
# ##### END GPL LICENSE BLOCK #####
|
||||
|
||||
# <pep8 compliant>
|
||||
|
||||
# To run the test type: blender -b /path/to/the/blend/file --python path/to/this/py/file -- --run-all-tests -- --verbose
|
||||
# Type the above line in cmd/terminal, for example, look below
|
||||
# blender -b c:\blender-lib\deform_modifiers.blend --python c:\deform_modifiers.py -- --run-all-tests -- --verbose
|
||||
|
||||
|
||||
import os
|
||||
import sys
|
||||
import bpy
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import MeshTest, ModifierSpec, OperatorSpecObjectMode, DeformModifierSpec, RunTest
|
||||
|
||||
tests = [
|
||||
|
||||
# Surface Deform Test, finally can bind to the Target object.
|
||||
# Actual deformation occurs by animating imitating user input.
|
||||
|
||||
MeshTest("SurfaceDeform", "testObjMonkeySurfaceDeform", "expObjMonkeySurfaceDeform",
|
||||
[DeformModifierSpec(10, [
|
||||
ModifierSpec('surface_deform', 'SURFACE_DEFORM', {'target': bpy.data.objects["Cube"]})],
|
||||
OperatorSpecObjectMode('surfacedeform_bind', {'modifier': 'surface_deform'}))]),
|
||||
|
||||
# Mesh Deform Test, finally can bind to the Target object.
|
||||
# Actual deformation occurs by animating imitating user input.
|
||||
|
||||
MeshTest("MeshDeform", "testObjMonkeyMeshDeform", "expObjMonkeyMeshDeform",
|
||||
[DeformModifierSpec(10, [ModifierSpec('mesh_deform', 'MESH_DEFORM',
|
||||
{'object': bpy.data.objects["MeshCube"], 'precision': 2})],
|
||||
OperatorSpecObjectMode('meshdeform_bind', {'modifier': 'mesh_deform'}))]),
|
||||
|
||||
# Surface Deform Test, finally can bind to the Target object.
|
||||
# Actual deformation occurs by animating imitating user input.
|
||||
|
||||
MeshTest("Hook", "testObjHookPlane", "expObjHookPlane",
|
||||
[DeformModifierSpec(10, [ModifierSpec('hook', 'HOOK',
|
||||
{'object': bpy.data.objects["Empty"], 'falloff_radius': 1,
|
||||
'vertex_group': 'Group'})])]),
|
||||
|
||||
# Laplacian Deform Test, first a hook is attached.
|
||||
|
||||
MeshTest("Laplace", "testObjCubeLaplacian", "expObjCubeLaplacian",
|
||||
[DeformModifierSpec(10,
|
||||
[ModifierSpec('hook2', 'HOOK', {'object': bpy.data.objects["Empty.001"],
|
||||
'vertex_group': 'hook_vg'}),
|
||||
ModifierSpec('laplace', 'LAPLACIANDEFORM', {'vertex_group': 'laplace_vg'})],
|
||||
OperatorSpecObjectMode('laplaciandeform_bind', {'modifier': 'laplace'}))]),
|
||||
|
||||
MeshTest("WarpPlane", "testObjPlaneWarp", "expObjPlaneWarp",
|
||||
[DeformModifierSpec(10, [ModifierSpec('warp', 'WARP',
|
||||
{'object_from': bpy.data.objects["From"],
|
||||
'object_to': bpy.data.objects["To"],
|
||||
})])]),
|
||||
|
||||
#############################################
|
||||
# Curves Deform Modifiers
|
||||
#############################################
|
||||
MeshTest("CurveArmature", "testObjBezierCurveArmature", "expObjBezierCurveArmature",
|
||||
[DeformModifierSpec(10, [ModifierSpec('curve_armature', 'ARMATURE',
|
||||
{'object': bpy.data.objects['testArmatureHelper'],
|
||||
'use_vertex_groups': False, 'use_bone_envelopes': True})])]),
|
||||
|
||||
MeshTest("CurveLattice", "testObjBezierCurveLattice", "expObjBezierCurveLattice",
|
||||
[DeformModifierSpec(10, [ModifierSpec('curve_lattice', 'LATTICE',
|
||||
{'object': bpy.data.objects['testLatticeCurve']})])]),
|
||||
|
||||
# HOOK for Curves can't be tested with current framework, as it requires going to Edit Mode to select vertices,
|
||||
# here is no equivalent of a vertex group in Curves.
|
||||
# Dummy test for Hook, can also be called corner case
|
||||
MeshTest("CurveHook", "testObjBezierCurveHook", "expObjBezierCurveHook",
|
||||
[DeformModifierSpec(10,
|
||||
[ModifierSpec('curve_Hook', 'HOOK', {'object': bpy.data.objects['EmptyCurve']})])]),
|
||||
|
||||
MeshTest("MeshDeformCurve", "testObjCurveMeshDeform", "expObjCurveMeshDeform",
|
||||
[DeformModifierSpec(10, [
|
||||
ModifierSpec('mesh_deform_curve', 'MESH_DEFORM', {'object': bpy.data.objects["Cylinder"],
|
||||
'precision': 2})],
|
||||
OperatorSpecObjectMode('meshdeform_bind', {'modifier': 'mesh_deform_curve'}))]),
|
||||
|
||||
MeshTest("WarpCurve", "testObjBezierCurveWarp", "expObjBezierCurveWarp",
|
||||
[DeformModifierSpec(10, [ModifierSpec('warp_curve', 'WARP',
|
||||
{'object_from': bpy.data.objects["From_curve"],
|
||||
'object_to': bpy.data.objects["To_curve"]})])]),
|
||||
|
||||
]
|
||||
|
||||
deform_tests = RunTest(tests)
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
deform_tests.apply_modifiers = True
|
||||
deform_tests.do_compare = True
|
||||
deform_tests.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
deform_tests.apply_modifiers = False
|
||||
deform_tests.do_compare = False
|
||||
name = command[i + 1]
|
||||
deform_tests.run_test(name)
|
||||
break
|
@ -26,7 +26,7 @@ from random import shuffle, seed
|
||||
import bpy
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import ModifierTest, ModifierSpec
|
||||
from modules.mesh_test import RunTest, ModifierSpec, MeshTest
|
||||
|
||||
seed(0)
|
||||
|
||||
@ -47,7 +47,7 @@ def get_generate_modifiers_list(test_object_name, randomize=False):
|
||||
ModifierSpec('array', 'ARRAY', {}),
|
||||
ModifierSpec('bevel', 'BEVEL', {'width': 0.1}),
|
||||
ModifierSpec('boolean', 'BOOLEAN', {'object': boolean_test_object, 'solver': 'FAST'}),
|
||||
ModifierSpec('build', 'BUILD', {'frame_start': 0, 'frame_duration': 1}),
|
||||
ModifierSpec('build', 'BUILD', {'frame_start': 1, 'frame_duration': 1}, 2),
|
||||
ModifierSpec('decimate', 'DECIMATE', {}),
|
||||
ModifierSpec('edge split', 'EDGE_SPLIT', {}),
|
||||
|
||||
@ -62,7 +62,6 @@ def get_generate_modifiers_list(test_object_name, randomize=False):
|
||||
# ModifierSpec('remesh', 'REMESH', {}),
|
||||
|
||||
# ModifierSpec('screw', 'SCREW', {}), # screw can make the test very slow. Skipping for now.
|
||||
# ModifierSpec('skin', 'SKIN', {}), # skin is not reproducible .
|
||||
|
||||
ModifierSpec('solidify', 'SOLIDIFY', {}),
|
||||
ModifierSpec('subsurf', 'SUBSURF', {}),
|
||||
@ -78,7 +77,6 @@ def get_generate_modifiers_list(test_object_name, randomize=False):
|
||||
|
||||
|
||||
def main():
|
||||
|
||||
mask_first_list = get_generate_modifiers_list("testCubeMaskFirst", randomize=True)
|
||||
mask_vertex_group = "testCubeMaskFirst" + "_mask"
|
||||
mask_first_list.insert(0, ModifierSpec('mask', 'MASK', {'vertex_group': mask_vertex_group}))
|
||||
@ -88,169 +86,279 @@ def main():
|
||||
# List of 'Generate' modifiers on a cube
|
||||
###############################
|
||||
# 0
|
||||
# ["testCube", "expectedCube", get_generate_modifiers_list("testCube")],
|
||||
["testCubeRandom", "expectedCubeRandom", get_generate_modifiers_list("testCubeRandom", randomize=True)],
|
||||
["testCubeMaskFirst", "expectedCubeMaskFirst", mask_first_list],
|
||||
# MeshTest("testCube", "expectedCube", get_generate_modifiers_list("testCube")),
|
||||
MeshTest("CubeRandom", "testCubeRandom", "expectedCubeRandom",
|
||||
get_generate_modifiers_list("testCubeRandom", randomize=True)),
|
||||
MeshTest("CubeMaskFirst", "testCubeMaskFirst", "expectedCubeMaskFirst", mask_first_list),
|
||||
|
||||
["testCollapseDecimate", "expectedCollapseDecimate",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2}),
|
||||
ModifierSpec('decimate', 'DECIMATE', {'decimate_type': 'COLLAPSE', 'ratio': 0.25, 'use_collapse_triangulate': True})]],
|
||||
["testPlanarDecimate", "expectedPlanarDecimate",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2}),
|
||||
ModifierSpec('decimate', 'DECIMATE', {'decimate_type': 'DISSOLVE', 'angle_limit': math.radians(30)})]],
|
||||
["testUnsubdivideDecimate", "expectedUnsubdivideDecimate",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2}),
|
||||
ModifierSpec('decimate', 'DECIMATE', {'decimate_type': 'UNSUBDIV', 'iterations': 2})]],
|
||||
MeshTest("CollapseDecimate", "testCollapseDecimate", "expectedCollapseDecimate",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2}),
|
||||
ModifierSpec('decimate', 'DECIMATE',
|
||||
{'decimate_type': 'COLLAPSE', 'ratio': 0.25, 'use_collapse_triangulate': True})]),
|
||||
MeshTest("PlanarDecimate", "testPlanarDecimate", "expectedPlanarDecimate",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2}),
|
||||
ModifierSpec('decimate', 'DECIMATE',
|
||||
{'decimate_type': 'DISSOLVE', 'angle_limit': math.radians(30)})]),
|
||||
MeshTest("UnsubdivideDecimate", "testUnsubdivideDecimate", "expectedUnsubdivideDecimate",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2}),
|
||||
ModifierSpec('decimate', 'DECIMATE', {'decimate_type': 'UNSUBDIV', 'iterations': 2})]),
|
||||
|
||||
# 5
|
||||
["testRadialBisectMirror", "expectedRadialBisectMirror",
|
||||
[ModifierSpec('mirror1', 'MIRROR', {'use_bisect_axis': (True, False, False)}),
|
||||
ModifierSpec('mirror2', 'MIRROR', {'use_bisect_axis': (True, False, False), 'mirror_object': bpy.data.objects["testRadialBisectMirrorHelper"]}),
|
||||
ModifierSpec('mirror3', 'MIRROR', {'use_axis': (False, True, False), 'use_bisect_axis': (False, True, False), 'use_bisect_flip_axis': (False, True, False), 'mirror_object': bpy.data.objects["testRadialBisectMirrorHelper"]})]],
|
||||
["regressT58411Mirror", "expectedT58411Mirror",
|
||||
[ModifierSpec('mirror', 'MIRROR', {}),
|
||||
ModifierSpec('bevel', 'BEVEL', {'segments': 2, 'limit_method': 'WEIGHT'}),
|
||||
ModifierSpec('subd', 'SUBSURF', {'levels': 1})]],
|
||||
MeshTest("RadialBisectMirror", "testRadialBisectMirror", "expectedRadialBisectMirror",
|
||||
[ModifierSpec('mirror1', 'MIRROR', {'use_bisect_axis': (True, False, False)}),
|
||||
ModifierSpec('mirror2', 'MIRROR', {'use_bisect_axis': (True, False, False),
|
||||
'mirror_object': bpy.data.objects[
|
||||
"testRadialBisectMirrorHelper"]}),
|
||||
ModifierSpec('mirror3', 'MIRROR',
|
||||
{'use_axis': (False, True, False), 'use_bisect_axis': (False, True, False),
|
||||
'use_bisect_flip_axis': (False, True, False),
|
||||
'mirror_object': bpy.data.objects["testRadialBisectMirrorHelper"]})]),
|
||||
MeshTest("T58411Mirror", "regressT58411Mirror", "expectedT58411Mirror",
|
||||
[ModifierSpec('mirror', 'MIRROR', {}),
|
||||
ModifierSpec('bevel', 'BEVEL', {'segments': 2, 'limit_method': 'WEIGHT'}),
|
||||
ModifierSpec('subd', 'SUBSURF', {'levels': 1})]),
|
||||
|
||||
["testBasicScrew", "expectedBasicScrew",
|
||||
[ModifierSpec('mirror', 'MIRROR', {'mirror_object': bpy.data.objects["testBasicScrewHelper"]}),
|
||||
ModifierSpec("screw", 'SCREW', {'angle': math.radians(400), 'steps': 20, 'iterations': 2, 'screw_offset': 2, 'use_normal_calculate': True})]],
|
||||
["testObjectScrew", "expectedObjectScrew",
|
||||
[ModifierSpec('mirror', 'MIRROR', {'mirror_object': bpy.data.objects["testObjectScrewHelper2"]}),
|
||||
ModifierSpec("screw", 'SCREW', {"angle": math.radians(600), 'steps': 32, 'iterations': 1, 'use_object_screw_offset': True, 'use_normal_calculate': True, 'object': bpy.data.objects["testObjectScrewHelper1"]})]],
|
||||
MeshTest("BasicScrew", "testBasicScrew", "expectedBasicScrew",
|
||||
[ModifierSpec('mirror', 'MIRROR', {'mirror_object': bpy.data.objects["testBasicScrewHelper"]}),
|
||||
ModifierSpec("screw", 'SCREW',
|
||||
{'angle': math.radians(400), 'steps': 20, 'iterations': 2, 'screw_offset': 2,
|
||||
'use_normal_calculate': True})]),
|
||||
MeshTest("ObjectScrew", "testObjectScrew", "expectedObjectScrew",
|
||||
[ModifierSpec('mirror', 'MIRROR', {'mirror_object': bpy.data.objects["testObjectScrewHelper2"]}),
|
||||
ModifierSpec("screw", 'SCREW',
|
||||
{"angle": math.radians(600), 'steps': 32, 'iterations': 1,
|
||||
'use_object_screw_offset': True,
|
||||
'use_normal_calculate': True, 'object': bpy.data.objects["testObjectScrewHelper1"]})]),
|
||||
|
||||
# 9
|
||||
["testMergedScrewWeld", "expectedMergedScrewWeld",
|
||||
[ModifierSpec("screw", 'SCREW', {'angle': math.radians(360), 'steps': 12, 'iterations': 1, 'screw_offset': 1, 'use_normal_calculate': True, 'use_merge_vertices': True}),
|
||||
ModifierSpec("weld", 'WELD', {"merge_threshold": 0.001})]],
|
||||
["regressT72380Weld", "expectedT72380Weld",
|
||||
[ModifierSpec('vedit', 'VERTEX_WEIGHT_EDIT', {'vertex_group': 'Group', 'use_remove': True, 'remove_threshold': 1}),
|
||||
ModifierSpec("weld", 'WELD', {"merge_threshold": 0.2, "vertex_group": "Group"})]],
|
||||
["regressT72792Weld", "expectedT72792Weld",
|
||||
[ModifierSpec('array', 'ARRAY', {'fit_type': 'FIXED_COUNT', 'count': 2}),
|
||||
ModifierSpec("weld", 'WELD', {"merge_threshold": 0.1, "vertex_group": "Group"})]],
|
||||
MeshTest("MergedScrewWeld", "testMergedScrewWeld", "expectedMergedScrewWeld",
|
||||
[ModifierSpec("screw", 'SCREW',
|
||||
{'angle': math.radians(360), 'steps': 12, 'iterations': 1, 'screw_offset': 1,
|
||||
'use_normal_calculate': True, 'use_merge_vertices': True}),
|
||||
ModifierSpec("weld", 'WELD', {"merge_threshold": 0.001})]),
|
||||
MeshTest("T72380Weld", "regressT72380Weld", "expectedT72380Weld",
|
||||
[ModifierSpec('vedit', 'VERTEX_WEIGHT_EDIT',
|
||||
{'vertex_group': 'Group', 'use_remove': True, 'remove_threshold': 1}),
|
||||
ModifierSpec("weld", 'WELD', {"merge_threshold": 0.2, "vertex_group": "Group"})]),
|
||||
MeshTest("T72792Weld", "regressT72792Weld", "expectedT72792Weld",
|
||||
[ModifierSpec('array', 'ARRAY', {'fit_type': 'FIXED_COUNT', 'count': 2}),
|
||||
ModifierSpec("weld", 'WELD', {"merge_threshold": 0.1, "vertex_group": "Group"})]),
|
||||
|
||||
############################################
|
||||
# One 'Generate' modifier on primitive meshes
|
||||
#############################################
|
||||
# 12
|
||||
["testCubeArray", "expectedCubeArray", [ModifierSpec('array', 'ARRAY', {})]],
|
||||
["testCapArray", "expectedCapArray",
|
||||
[ModifierSpec('array', 'ARRAY', {'fit_type': 'FIT_LENGTH', 'fit_length': 2.0, 'start_cap': bpy.data.objects["testCapStart"], 'end_cap': bpy.data.objects["testCapEnd"]})]],
|
||||
["testCurveArray", "expectedCurveArray",
|
||||
[ModifierSpec('array', 'ARRAY', {'fit_type': 'FIT_CURVE', 'curve': bpy.data.objects["testCurveArrayHelper"], 'use_relative_offset': False, 'use_constant_offset': True, 'constant_offset_displace': (0.5, 0, 0)})]],
|
||||
["testRadialArray", "expectedRadialArray",
|
||||
[ModifierSpec('array', 'ARRAY', {'fit_type': 'FIXED_COUNT', 'count': 3, 'use_merge_vertices': True, 'use_merge_vertices_cap': True, 'use_relative_offset': False, 'use_object_offset': True, 'offset_object': bpy.data.objects["testRadialArrayHelper"]})]],
|
||||
MeshTest("CubeArray", "testCubeArray", "expectedCubeArray",
|
||||
[ModifierSpec('array', 'ARRAY', {})]),
|
||||
MeshTest("CapArray", "testCapArray", "expectedCapArray",
|
||||
[ModifierSpec('array', 'ARRAY',
|
||||
{'fit_type': 'FIT_LENGTH', 'fit_length': 2.0,
|
||||
'start_cap': bpy.data.objects["testCapStart"],
|
||||
'end_cap': bpy.data.objects["testCapEnd"]})]),
|
||||
MeshTest("CurveArray", "testCurveArray", "expectedCurveArray",
|
||||
[ModifierSpec('array', 'ARRAY',
|
||||
{'fit_type': 'FIT_CURVE', 'curve': bpy.data.objects["testCurveArrayHelper"],
|
||||
'use_relative_offset': False, 'use_constant_offset': True,
|
||||
'constant_offset_displace': (0.5, 0, 0)})]),
|
||||
MeshTest("RadialArray", "testRadialArray", "expectedRadialArray",
|
||||
[ModifierSpec('array', 'ARRAY', {'fit_type': 'FIXED_COUNT', 'count': 3, 'use_merge_vertices': True,
|
||||
'use_merge_vertices_cap': True, 'use_relative_offset': False,
|
||||
'use_object_offset': True,
|
||||
'offset_object': bpy.data.objects["testRadialArrayHelper"]})]),
|
||||
|
||||
["testCylinderBuild", "expectedCylinderBuild", [ModifierSpec('build', 'BUILD', {'frame_start': 0, 'frame_duration': 1})]],
|
||||
MeshTest("CylinderBuild", "testCylinderBuild", "expectedCylinderBuild",
|
||||
[ModifierSpec('build', 'BUILD', {'frame_start': 1, 'frame_duration': 1}, 2)]),
|
||||
|
||||
# 17
|
||||
["testConeDecimate", "expectedConeDecimate", [ModifierSpec('decimate', 'DECIMATE', {'ratio': 0.5})]],
|
||||
["testCubeEdgeSplit", "expectedCubeEdgeSplit", [ModifierSpec('edge split', 'EDGE_SPLIT', {})]],
|
||||
MeshTest("ConeDecimate", "testConeDecimate", "expectedConeDecimate",
|
||||
[ModifierSpec('decimate', 'DECIMATE', {'ratio': 0.5})]),
|
||||
MeshTest("CubeEdgeSplit", "testCubeEdgeSplit", "expectedCubeEdgeSplit",
|
||||
[ModifierSpec('edge split', 'EDGE_SPLIT', {})]),
|
||||
|
||||
["testSphereMirror", "expectedSphereMirror", [ModifierSpec('mirror', 'MIRROR', {})]],
|
||||
["testLocalMirror", "expectedLocalMirror",
|
||||
[ModifierSpec('mirror', 'MIRROR', {'use_clip': True})]],
|
||||
["testObjectOffsetMirror", "expectedObjectOffsetMirror",
|
||||
[ModifierSpec('mirror', 'MIRROR', {'mirror_object': bpy.data.objects["testObjectOffsetMirrorHelper"]})]],
|
||||
MeshTest("SphereMirror", "testSphereMirror", "expectedSphereMirror",
|
||||
[ModifierSpec('mirror', 'MIRROR', {})]),
|
||||
MeshTest("LocalMirror", "testLocalMirror", "expectedLocalMirror",
|
||||
[ModifierSpec('mirror', 'MIRROR', {'use_clip': True})]),
|
||||
MeshTest("ObjectOffsetMirror", "testObjectOffsetMirror", "expectedObjectOffsetMirror",
|
||||
[ModifierSpec('mirror', 'MIRROR',
|
||||
{'mirror_object': bpy.data.objects["testObjectOffsetMirrorHelper"]})]),
|
||||
|
||||
["testCylinderMask", "expectedCylinderMask", [ModifierSpec('mask', 'MASK', {'vertex_group': "mask_vertex_group"})]],
|
||||
["testConeMultiRes", "expectedConeMultiRes", [ModifierSpec('multires', 'MULTIRES', {})]],
|
||||
MeshTest("CylinderMask", "testCylinderMask", "expectedCylinderMask",
|
||||
[ModifierSpec('mask', 'MASK', {'vertex_group': "mask_vertex_group"})]),
|
||||
MeshTest("ConeMultiRes", "testConeMultiRes", "expectedConeMultiRes",
|
||||
[ModifierSpec('multires', 'MULTIRES', {})]),
|
||||
|
||||
# 24
|
||||
["testCubeScrew", "expectedCubeScrew", [ModifierSpec('screw', 'SCREW', {})]],
|
||||
MeshTest("CubeScrew", "testCubeScrew", "expectedCubeScrew",
|
||||
[ModifierSpec('screw', 'SCREW', {})]),
|
||||
|
||||
["testCubeSolidify", "expectedCubeSolidify", [ModifierSpec('solidify', 'SOLIDIFY', {})]],
|
||||
["testComplexSolidify", "expectedComplexSolidify",
|
||||
[ModifierSpec('solidify', 'SOLIDIFY', {'solidify_mode': 'NON_MANIFOLD', 'thickness': 0.05, 'offset': 0, 'nonmanifold_thickness_mode': 'CONSTRAINTS'})]],
|
||||
["regressT63063Solidify", "expectedT63063Solidify",
|
||||
[ModifierSpec('solid', 'SOLIDIFY', {'thickness': 0.1, 'offset': 0.7})]],
|
||||
["regressT61979Solidify", "expectedT61979Solidify",
|
||||
[ModifierSpec('solid', 'SOLIDIFY', {'thickness': -0.25, 'use_even_offset': True, 'use_quality_normals': True})]],
|
||||
MeshTest("CubeSolidify", "testCubeSolidify", "expectedCubeSolidify",
|
||||
[ModifierSpec('solidify', 'SOLIDIFY', {})]),
|
||||
MeshTest("ComplexSolidify", "testComplexSolidify", "expectedComplexSolidify",
|
||||
[ModifierSpec('solidify', 'SOLIDIFY', {'solidify_mode': 'NON_MANIFOLD', 'thickness': 0.05, 'offset': 0,
|
||||
'nonmanifold_thickness_mode': 'CONSTRAINTS'})]),
|
||||
MeshTest("T63063Solidify", "regressT63063Solidify", "expectedT63063Solidify",
|
||||
[ModifierSpec('solid', 'SOLIDIFY', {'thickness': 0.1, 'offset': 0.7})]),
|
||||
MeshTest("T61979Solidify", "regressT61979Solidify", "expectedT61979Solidify",
|
||||
[ModifierSpec('solid', 'SOLIDIFY',
|
||||
{'thickness': -0.25, 'use_even_offset': True, 'use_quality_normals': True})]),
|
||||
|
||||
["testMonkeySubsurf", "expectedMonkeySubsurf", [ModifierSpec('subsurf', 'SUBSURF', {})]],
|
||||
["testCatmullClarkSubdivisionSurface", "expectedCatmullClarkSubdivisionSurface",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2})]],
|
||||
["testSimpleSubdivisionSurface", "expectedSimpleSubdivisionSurface",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2, 'subdivision_type': 'SIMPLE'})]],
|
||||
["testCrease2dSubdivisionSurface", "expectedCrease2dSubdivisionSurface",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2})]],
|
||||
["testCrease3dSubdivisionSurface", "expectedCrease3dSubdivisionSurface",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2})]],
|
||||
MeshTest("MonkeySubsurf", "testMonkeySubsurf", "expectedMonkeySubsurf",
|
||||
[ModifierSpec('subsurf', 'SUBSURF', {})]),
|
||||
MeshTest("CatmullClarkSubdivisionSurface", "testCatmullClarkSubdivisionSurface",
|
||||
"expectedCatmullClarkSubdivisionSurface",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2})]),
|
||||
MeshTest("SimpleSubdivisionSurface", "testSimpleSubdivisionSurface", "expectedSimpleSubdivisionSurface",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2, 'subdivision_type': 'SIMPLE'})]),
|
||||
MeshTest("Crease2dSubdivisionSurface", "testCrease2dSubdivisionSurface", "expectedCrease2dSubdivisionSurface",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2})]),
|
||||
MeshTest("Crease3dSubdivisionSurface", "testCrease3dSubdivisionSurface", "expectedCrease3dSubdivisionSurface",
|
||||
[ModifierSpec("subdivision", 'SUBSURF', {"levels": 2})]),
|
||||
|
||||
# 34
|
||||
["testSphereTriangulate", "expectedSphereTriangulate", [ModifierSpec('triangulate', 'TRIANGULATE', {})]],
|
||||
["testMonkeyWireframe", "expectedMonkeyWireframe", [ModifierSpec('wireframe', 'WIREFRAME', {})]],
|
||||
#ModifierSpec('skin', 'SKIN', {}), # skin is not reproducible .
|
||||
|
||||
["testMergedWeld", "expectedMergedWeld",
|
||||
[ModifierSpec("weld", 'WELD', {"merge_threshold": 0.021})]],
|
||||
["testMergedAllWeld", "expectedMergedAllWeld",
|
||||
[ModifierSpec("weld", 'WELD', {"merge_threshold": 1.8})]],
|
||||
["testMergedNoneWeld", "expectedMergedNoneWeld",
|
||||
[ModifierSpec("weld", 'WELD', {"merge_threshold": 0.019})]],
|
||||
MeshTest("SphereTriangulate", "testSphereTriangulate", "expectedSphereTriangulate",
|
||||
[ModifierSpec('triangulate', 'TRIANGULATE', {})]),
|
||||
MeshTest("MonkeyWireframe", "testMonkeyWireframe", "expectedMonkeyWireframe",
|
||||
[ModifierSpec('wireframe', 'WIREFRAME', {})]),
|
||||
|
||||
# Duplicate the object, test object and expected object have same world coordinates.
|
||||
MeshTest("Skin", "testObjPlaneSkin", "expObjPlaneSkin",
|
||||
[ModifierSpec('skin', 'SKIN', {})]),
|
||||
|
||||
MeshTest("MergedWeld", "testMergedWeld", "expectedMergedWeld",
|
||||
[ModifierSpec("weld", 'WELD', {"merge_threshold": 0.021})]),
|
||||
MeshTest("MergedAllWeld", "testMergedAllWeld", "expectedMergedAllWeld",
|
||||
[ModifierSpec("weld", 'WELD', {"merge_threshold": 1.8})]),
|
||||
MeshTest("MergedNoneWeld", "testMergedNoneWeld", "expectedMergedNoneWeld",
|
||||
[ModifierSpec("weld", 'WELD', {"merge_threshold": 0.019})]),
|
||||
|
||||
|
||||
#############################################
|
||||
# One 'Deform' modifier on primitive meshes
|
||||
#############################################
|
||||
# 39
|
||||
["testMonkeyArmature", "expectedMonkeyArmature",
|
||||
[ModifierSpec('armature', 'ARMATURE', {'object': bpy.data.objects['testArmature'], 'use_vertex_groups': True})]],
|
||||
["testTorusCast", "expectedTorusCast", [ModifierSpec('cast', 'CAST', {'factor': 2.64})]],
|
||||
["testCubeCurve", "expectedCubeCurve",
|
||||
[ModifierSpec('curve', 'CURVE', {'object': bpy.data.objects['testBezierCurve']})]],
|
||||
["testMonkeyDisplace", "expectedMonkeyDisplace", [ModifierSpec('displace', "DISPLACE", {})]],
|
||||
MeshTest("MonkeyArmature", "testMonkeyArmature", "expectedMonkeyArmature",
|
||||
[ModifierSpec('armature', 'ARMATURE',
|
||||
{'object': bpy.data.objects['testArmature'], 'use_vertex_groups': True})]),
|
||||
MeshTest("TorusCast", "testTorusCast", "expectedTorusCast",
|
||||
[ModifierSpec('cast', 'CAST', {'factor': 2.64})]),
|
||||
MeshTest("CubeCurve", "testCubeCurve", "expectedCubeCurve",
|
||||
[ModifierSpec('curve', 'CURVE', {'object': bpy.data.objects['testBezierCurve']})]),
|
||||
MeshTest("MonkeyDisplace", "testMonkeyDisplace", "expectedMonkeyDisplace",
|
||||
[ModifierSpec('displace', "DISPLACE", {})]),
|
||||
|
||||
# Hook modifier requires moving the hook object to get a mesh change, so can't test it with the current framework
|
||||
# ["testMonkeyHook", "expectedMonkeyHook",
|
||||
# [ModifierSpec('hook', 'HOOK', {'object': bpy.data.objects["EmptyHook"], 'vertex_group': "HookVertexGroup"})]],
|
||||
# Hook modifier requires moving the hook object to get a mesh change
|
||||
# so can't test it with the current framework
|
||||
# MeshTest("MonkeyHook", "testMonkeyHook", "expectedMonkeyHook",
|
||||
# [ModifierSpec('hook', 'HOOK', {'object': bpy.data.objects["EmptyHook"], 'vertex_group':
|
||||
# "HookVertexGroup"})]),
|
||||
|
||||
# 43
|
||||
#ModifierSpec('laplacian_deform', 'LAPLACIANDEFORM', {}) Laplacian requires a more complex mesh
|
||||
["testCubeLattice", "expectedCubeLattice",
|
||||
[ModifierSpec('lattice', 'LATTICE', {'object': bpy.data.objects["testLattice"]})]],
|
||||
|
||||
# ModifierSpec('laplacian_deform', 'LAPLACIANDEFORM', {}) Laplacian requires a more complex mesh
|
||||
MeshTest("CubeLattice", "testCubeLattice", "expectedCubeLattice",
|
||||
[ModifierSpec('lattice', 'LATTICE', {'object': bpy.data.objects["testLattice"]})]),
|
||||
|
||||
# Mesh Deform Modifier requires user input, so skip.
|
||||
MeshTest("PlaneShrinkWrap", "testPlaneShrinkWrap", "expectedPlaneShrinkWrap",
|
||||
[ModifierSpec('shrinkwrap', 'SHRINKWRAP',
|
||||
{'target': bpy.data.objects["testCubeWrap"], 'offset': 0.5})]),
|
||||
|
||||
# mesh_test = MeshTest("testMonkeyDeform", "expectedMonkeyDeform",[
|
||||
# ModifierSpec('mesh_deform', 'MESH_DEFORM', {'object': bpy.data.objects["testDeformStructure"]}),
|
||||
# OperatorSpec('meshdeform_bind',{'modifier':'MeshDeform'},'FACE',{i for in range(500)})
|
||||
# ] ,True)
|
||||
MeshTest("CylinderSimpleDeform", "testCylinderSimpleDeform", "expectedCylinderSimpleDeform",
|
||||
[ModifierSpec('simple_deform', 'SIMPLE_DEFORM', {'angle': math.radians(180), 'deform_axis': 'Z'})]),
|
||||
|
||||
["testPlaneShrinkWrap", "expectedPlaneShrinkWrap",
|
||||
[ModifierSpec('shrinkwrap', 'SHRINKWRAP', {'target': bpy.data.objects["testCubeWrap"], 'offset': 0.5})]],
|
||||
|
||||
["testCylinderSimpleDeform", "expectedCylinderSimpleDeform",
|
||||
[ModifierSpec('simple_deform', 'SIMPLE_DEFORM', {'angle': math.radians(180), 'deform_axis': 'Z'})]],
|
||||
|
||||
["testPlaneSmooth", "expectedPlaneSmooth",
|
||||
[ModifierSpec('smooth', 'SMOOTH', {'iterations': 11})]],
|
||||
MeshTest("PlaneSmooth", "testPlaneSmooth", "expectedPlaneSmooth",
|
||||
[ModifierSpec('smooth', 'SMOOTH', {'iterations': 11})]),
|
||||
|
||||
# Smooth corrective requires a complex mesh.
|
||||
|
||||
["testBalloonLaplacianSmooth", "expectedBalloonLaplacianSmooth",
|
||||
[ModifierSpec('laplaciansmooth', 'LAPLACIANSMOOTH', {'lambda_factor': 12, 'lambda_border': 12})]],
|
||||
MeshTest("BalloonLaplacianSmooth", "testBalloonLaplacianSmooth", "expectedBalloonLaplacianSmooth",
|
||||
[ModifierSpec('laplaciansmooth', 'LAPLACIANSMOOTH', {'lambda_factor': 12, 'lambda_border': 12})]),
|
||||
|
||||
# Surface Deform and Warp requires user input, so skip.
|
||||
# Gets updated often
|
||||
MeshTest("WavePlane", "testObjPlaneWave", "expObjPlaneWave",
|
||||
[ModifierSpec('wave', 'WAVE', {})]),
|
||||
|
||||
# Wave - requires complex mesh, so skip.
|
||||
#############################################
|
||||
# CURVES Generate Modifiers
|
||||
#############################################
|
||||
# Caution: Make sure test object has no modifier in "added" state, the test may fail.
|
||||
MeshTest("BezCurveArray", "testObjBezierCurveArray", "expObjBezierCurveArray",
|
||||
[ModifierSpec('array', 'ARRAY', {})]),
|
||||
|
||||
MeshTest("CurveBevel", "testObjBezierCurveBevel", "expObjBezierCurveBevel",
|
||||
[ModifierSpec('bevel', 'BEVEL', {})]),
|
||||
|
||||
MeshTest("CurveBuild", "testObjBezierCurveBuild", "expObjBezierCurveBuild",
|
||||
[ModifierSpec('build', 'BUILD', {'frame_start': 1, 'frame_duration': 1}, 2)]),
|
||||
|
||||
MeshTest("CurveDecimate", "testObjBezierCurveDecimate", "expObjBezierCurveDecimate",
|
||||
[ModifierSpec('decimate', 'DECIMATE', {'ratio': 0.5})]),
|
||||
|
||||
MeshTest("CurveEdgeSplit", "testObjBezierCurveEdgeSplit", "expObjBezierCurveEdgeSplit",
|
||||
[ModifierSpec('edgeSplit', 'EDGE_SPLIT', {})]),
|
||||
|
||||
MeshTest("CurveMirror", "testObjBezierCurveMirror", "expObjBezierCurveMirror",
|
||||
[ModifierSpec('mirror', 'MIRROR', {'use_axis': (True, True, False)})]),
|
||||
|
||||
MeshTest("CurveScrew", "testObjBezierCurveScrew", "expObjBezierCurveScrew",
|
||||
[ModifierSpec('screw', 'SCREW', {})]),
|
||||
|
||||
MeshTest("CurveSolidify", "testObjBezierCurveSolidify", "expObjBezierCurveSolidify",
|
||||
[ModifierSpec('solidify', 'SOLIDIFY', {'thickness': 1})]),
|
||||
|
||||
MeshTest("CurveSubSurf", "testObjBezierCurveSubSurf", "expObjBezierCurveSubSurf",
|
||||
[ModifierSpec('subSurf', 'SUBSURF', {})]),
|
||||
|
||||
MeshTest("CurveTriangulate", "testObjBezierCurveTriangulate", "expObjBezierCurveTriangulate",
|
||||
[ModifierSpec('triangulate', 'TRIANGULATE', {})]),
|
||||
|
||||
# Test 60
|
||||
# Caution Weld: if the distance is increased beyond a limit, the object disappears
|
||||
MeshTest("CurveWeld", "testObjBezierCurveWeld", "expObjBezierCurveWeld",
|
||||
[ModifierSpec('weld', 'WELD', {})]),
|
||||
|
||||
MeshTest("CurveWeld2", "testObjBezierCurveWeld2", "expObjBezierCurveWeld2",
|
||||
[ModifierSpec('weld', 'WELD', {})]),
|
||||
|
||||
#############################################
|
||||
# Curves Deform Modifiers
|
||||
#############################################
|
||||
# Test 62
|
||||
MeshTest("CurveCast", "testObjBezierCurveCast", "expObjBezierCurveCast",
|
||||
[ModifierSpec('Cast', 'CAST', {'cast_type': 'CYLINDER', 'factor': 10})]),
|
||||
|
||||
MeshTest("CurveShrinkWrap", "testObjBezierCurveShrinkWrap", "expObjBezierCurveShrinkWrap",
|
||||
[ModifierSpec('ShrinkWrap', 'SHRINKWRAP',
|
||||
{'target': bpy.data.objects['testShrinkWrapHelperSuzanne']})]),
|
||||
|
||||
MeshTest("CurveSimpleDeform", "testObjBezierCurveSimpleDeform", "expObjBezierCurveSimpleDeform",
|
||||
[ModifierSpec('simple_deform', 'SIMPLE_DEFORM', {'angle': math.radians(90)})]),
|
||||
|
||||
MeshTest("CurveSmooth", "testObjBezierCurveSmooth", "expObjBezierCurveSmooth",
|
||||
[ModifierSpec('smooth', 'SMOOTH', {'factor': 10})]),
|
||||
|
||||
MeshTest("CurveWave", "testObjBezierCurveWave", "expObjBezierCurveWave",
|
||||
[ModifierSpec('curve_wave', 'WAVE', {'time_offset': -1.5})]),
|
||||
|
||||
MeshTest("CurveCurve", "testObjBezierCurveCurve", "expObjBezierCurveCurve",
|
||||
[ModifierSpec('curve_Curve', 'CURVE', {'object': bpy.data.objects['NurbsCurve']})]),
|
||||
|
||||
]
|
||||
|
||||
modifiers_test = ModifierTest(tests)
|
||||
modifiers_test = RunTest(tests)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
modifiers_test.apply_modifiers = True
|
||||
modifiers_test.do_compare = True
|
||||
modifiers_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
modifiers_test.apply_modifiers = False
|
||||
index = int(command[i + 1])
|
||||
modifiers_test.run_test(index)
|
||||
modifiers_test.do_compare = False
|
||||
name = command[i + 1]
|
||||
modifiers_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
|
@ -45,7 +45,6 @@ import functools
|
||||
import inspect
|
||||
import os
|
||||
|
||||
|
||||
# Output from this module and from blender itself will occur during tests.
|
||||
# We need to flush python so that the output is properly interleaved, otherwise
|
||||
# blender's output for one test will end up showing in the middle of another test...
|
||||
@ -54,37 +53,39 @@ print = functools.partial(print, flush=True)
|
||||
|
||||
class ModifierSpec:
|
||||
"""
|
||||
Holds one modifier and its parameters.
|
||||
Holds a Generate or Deform or Physics modifier type and its parameters.
|
||||
"""
|
||||
|
||||
def __init__(self, modifier_name: str, modifier_type: str, modifier_parameters: dict):
|
||||
def __init__(self, modifier_name: str, modifier_type: str, modifier_parameters: dict, frame_end=0):
|
||||
"""
|
||||
Constructs a modifier spec.
|
||||
:param modifier_name: str - name of object modifier, e.g. "myFirstSubsurfModif"
|
||||
:param modifier_type: str - type of object modifier, e.g. "SUBSURF"
|
||||
:param modifier_parameters: dict - {name : val} dictionary giving modifier parameters, e.g. {"quality" : 4}
|
||||
:param frame_end: int - frame at which simulation needs to be baked or modifier needs to be applied.
|
||||
"""
|
||||
self.modifier_name = modifier_name
|
||||
self.modifier_type = modifier_type
|
||||
self.modifier_parameters = modifier_parameters
|
||||
self.frame_end = frame_end
|
||||
|
||||
def __str__(self):
|
||||
return "Modifier: " + self.modifier_name + " of type " + self.modifier_type + \
|
||||
" with parameters: " + str(self.modifier_parameters)
|
||||
|
||||
|
||||
class PhysicsSpec:
|
||||
class ParticleSystemSpec:
|
||||
"""
|
||||
Holds one Physics modifier and its parameters.
|
||||
Holds a Particle System modifier and its parameters.
|
||||
"""
|
||||
|
||||
def __init__(self, modifier_name: str, modifier_type: str, modifier_parameters: dict, frame_end: int):
|
||||
"""
|
||||
Constructs a physics spec.
|
||||
:param modifier_name: str - name of object modifier, e.g. "Cloth"
|
||||
:param modifier_type: str - type of object modifier, e.g. "CLOTH"
|
||||
:param modifier_parameters: dict - {name : val} dictionary giving modifier parameters, e.g. {"quality" : 4}
|
||||
:param frame_end:int - the last frame of the simulation at which it is baked
|
||||
Constructs a particle system spec.
|
||||
:param modifier_name: str - name of object modifier, e.g. "Particles"
|
||||
:param modifier_type: str - type of object modifier, e.g. "PARTICLE_SYSTEM"
|
||||
:param modifier_parameters: dict - {name : val} dictionary giving modifier parameters, e.g. {"seed" : 1}
|
||||
:param frame_end: int - the last frame of the simulation at which the modifier is applied
|
||||
"""
|
||||
self.modifier_name = modifier_name
|
||||
self.modifier_type = modifier_type
|
||||
@ -96,14 +97,14 @@ class PhysicsSpec:
|
||||
" with parameters: " + str(self.modifier_parameters) + " with frame end: " + str(self.frame_end)
|
||||
|
||||
|
||||
class OperatorSpec:
|
||||
class OperatorSpecEditMode:
|
||||
"""
|
||||
Holds one operator and its parameters.
|
||||
"""
|
||||
|
||||
def __init__(self, operator_name: str, operator_parameters: dict, select_mode: str, selection: set):
|
||||
"""
|
||||
Constructs an operatorSpec. Raises ValueError if selec_mode is invalid.
|
||||
Constructs an OperatorSpecEditMode. Raises ValueError if selec_mode is invalid.
|
||||
:param operator_name: str - name of mesh operator from bpy.ops.mesh, e.g. "bevel" or "fill"
|
||||
:param operator_parameters: dict - {name : val} dictionary containing operator parameters.
|
||||
:param select_mode: str - mesh selection mode, must be either 'VERT', 'EDGE' or 'FACE'
|
||||
@ -121,6 +122,45 @@ class OperatorSpec:
|
||||
" in selection mode: " + self.select_mode + ", selecting " + str(self.selection)
|
||||
|
||||
|
||||
class OperatorSpecObjectMode:
|
||||
"""
|
||||
Holds an object operator and its parameters. Helper class for DeformModifierSpec.
|
||||
Needed to support operations in Object Mode and not Edit Mode which is supported by OperatorSpecEditMode.
|
||||
"""
|
||||
|
||||
def __init__(self, operator_name: str, operator_parameters: dict):
|
||||
"""
|
||||
:param operator_name: str - name of the object operator from bpy.ops.object, e.g. "shade_smooth" or "shape_keys"
|
||||
:param operator_parameters: dict - contains operator parameters.
|
||||
"""
|
||||
self.operator_name = operator_name
|
||||
self.operator_parameters = operator_parameters
|
||||
|
||||
def __str__(self):
|
||||
return "Operator: " + self.operator_name + " with parameters: " + str(self.operator_parameters)
|
||||
|
||||
|
||||
class DeformModifierSpec:
|
||||
"""
|
||||
Holds a list of deform modifier and OperatorSpecObjectMode.
|
||||
For deform modifiers which have an object operator
|
||||
"""
|
||||
|
||||
def __init__(self, frame_number: int, modifier_list: list, object_operator_spec: OperatorSpecObjectMode = None):
|
||||
"""
|
||||
Constructs a Deform Modifier spec (for user input)
|
||||
:param frame_number: int - the frame at which animated keyframe is inserted
|
||||
:param modifier_list: ModifierSpec - contains modifiers
|
||||
:param object_operator_spec: OperatorSpecObjectMode - contains object operators
|
||||
"""
|
||||
self.frame_number = frame_number
|
||||
self.modifier_list = modifier_list
|
||||
self.object_operator_spec = object_operator_spec
|
||||
|
||||
def __str__(self):
|
||||
return "Modifier: " + str(self.modifier_list) + " with object operator " + str(self.object_operator_spec)
|
||||
|
||||
|
||||
class MeshTest:
|
||||
"""
|
||||
A mesh testing class targeted at testing modifiers and operators on a single object.
|
||||
@ -129,33 +169,45 @@ class MeshTest:
|
||||
"""
|
||||
|
||||
def __init__(
|
||||
self,
|
||||
test_object_name: str,
|
||||
expected_object_name: str,
|
||||
operations_stack=None,
|
||||
apply_modifiers=False,
|
||||
threshold=None,
|
||||
self,
|
||||
test_name: str,
|
||||
test_object_name: str,
|
||||
expected_object_name: str,
|
||||
operations_stack=None,
|
||||
apply_modifiers=False,
|
||||
do_compare=False,
|
||||
threshold=None
|
||||
):
|
||||
"""
|
||||
Constructs a MeshTest object. Raises a KeyError if objects with names expected_object_name
|
||||
or test_object_name don't exist.
|
||||
:param test_object: str - Name of object of mesh type to run the operations on.
|
||||
:param expected_object: str - Name of object of mesh type that has the expected
|
||||
:param test_name: str - unique test name identifier.
|
||||
:param test_object_name: str - Name of object of mesh type to run the operations on.
|
||||
:param expected_object_name: str - Name of object of mesh type that has the expected
|
||||
geometry after running the operations.
|
||||
:param operations_stack: list - stack holding operations to perform on the test_object.
|
||||
:param apply_modifier: bool - True if we want to apply the modifiers right after adding them to the object.
|
||||
This affects operations of type ModifierSpec only.
|
||||
:param apply_modifiers: bool - True if we want to apply the modifiers right after adding them to the object.
|
||||
- True if we want to apply the modifier to a list of modifiers, after some operation.
|
||||
This affects operations of type ModifierSpec and DeformModifierSpec.
|
||||
:param do_compare: bool - True if we want to compare the test and expected objects, False otherwise.
|
||||
:param threshold : exponent: To allow variations and accept difference to a certain degree.
|
||||
|
||||
"""
|
||||
if operations_stack is None:
|
||||
operations_stack = []
|
||||
for operation in operations_stack:
|
||||
if not (isinstance(operation, ModifierSpec) or isinstance(operation, OperatorSpec)):
|
||||
raise ValueError("Expected operation of type {} or {}. Got {}".
|
||||
format(type(ModifierSpec), type(OperatorSpec),
|
||||
if not (isinstance(operation, ModifierSpec) or isinstance(operation, OperatorSpecEditMode)
|
||||
or isinstance(operation, OperatorSpecObjectMode) or isinstance(operation, DeformModifierSpec)
|
||||
or isinstance(operation, ParticleSystemSpec)):
|
||||
raise ValueError("Expected operation of type {} or {} or {} or {}. Got {}".
|
||||
format(type(ModifierSpec), type(OperatorSpecEditMode),
|
||||
type(DeformModifierSpec), type(ParticleSystemSpec),
|
||||
type(operation)))
|
||||
self.operations_stack = operations_stack
|
||||
self.apply_modifier = apply_modifiers
|
||||
self.do_compare = do_compare
|
||||
self.threshold = threshold
|
||||
self.test_name = test_name
|
||||
|
||||
self.verbose = os.environ.get("BLENDER_VERBOSE") is not None
|
||||
self.update = os.getenv('BLENDER_TEST_UPDATE') is not None
|
||||
@ -187,22 +239,6 @@ class MeshTest:
|
||||
objects = bpy.data.objects
|
||||
self.expected_object = objects[expected_object_name]
|
||||
|
||||
def add_modifier(self, modifier_spec: ModifierSpec):
|
||||
"""
|
||||
Add a modifier to the operations stack.
|
||||
:param modifier_spec: modifier to add to the operations stack
|
||||
"""
|
||||
self.operations_stack.append(modifier_spec)
|
||||
if self.verbose:
|
||||
print("Added modififier {}".format(modifier_spec))
|
||||
|
||||
def add_operator(self, operator_spec: OperatorSpec):
|
||||
"""
|
||||
Adds an operator to the operations stack.
|
||||
:param operator_spec: OperatorSpec - operator to add to the operations stack.
|
||||
"""
|
||||
self.operations_stack.append(operator_spec)
|
||||
|
||||
def _on_failed_test(self, compare_result, validation_success, evaluated_test_object):
|
||||
if self.update and validation_success:
|
||||
if self.verbose:
|
||||
@ -239,83 +275,164 @@ class MeshTest:
|
||||
"""
|
||||
return self._test_updated
|
||||
|
||||
def _apply_modifier(self, test_object, modifier_spec: ModifierSpec):
|
||||
def _set_parameters_impl(self, modifier, modifier_parameters, nested_settings_path, modifier_name):
|
||||
"""
|
||||
Add modifier to object and apply (if modifier_spec.apply_modifier is True)
|
||||
Doing a depth first traversal of the modifier parameters and setting their values.
|
||||
:param: modifier: Of type modifier, its altered to become a setting in recursion.
|
||||
:param: modifier_parameters : dict or sequence, a simple/nested dictionary of modifier parameters.
|
||||
:param: nested_settings_path : list(stack): helps in tracing path to each node.
|
||||
"""
|
||||
if not isinstance(modifier_parameters, dict):
|
||||
param_setting = None
|
||||
for i, setting in enumerate(nested_settings_path):
|
||||
|
||||
# We want to set the attribute only when we have reached the last setting.
|
||||
# Applying of intermediate settings is meaningless.
|
||||
if i == len(nested_settings_path) - 1:
|
||||
setattr(modifier, setting, modifier_parameters)
|
||||
|
||||
elif hasattr(modifier, setting):
|
||||
param_setting = getattr(modifier, setting)
|
||||
# getattr doesn't accept canvas_surfaces["Surface"], but we need to pass it to setattr.
|
||||
if setting == "canvas_surfaces":
|
||||
modifier = param_setting.active
|
||||
else:
|
||||
modifier = param_setting
|
||||
else:
|
||||
# Clean up first
|
||||
bpy.ops.object.delete()
|
||||
raise Exception("Modifier '{}' has no parameter named '{}'".
|
||||
format(modifier_name, setting))
|
||||
|
||||
# It pops the current node before moving on to its sibling.
|
||||
nested_settings_path.pop()
|
||||
return
|
||||
|
||||
for key in modifier_parameters:
|
||||
nested_settings_path.append(key)
|
||||
self._set_parameters_impl(modifier, modifier_parameters[key], nested_settings_path, modifier_name)
|
||||
|
||||
if nested_settings_path:
|
||||
nested_settings_path.pop()
|
||||
|
||||
def set_parameters(self, modifier, modifier_parameters):
|
||||
"""
|
||||
Wrapper for _set_parameters_util
|
||||
"""
|
||||
settings = []
|
||||
modifier_name = modifier.name
|
||||
self._set_parameters_impl(modifier, modifier_parameters, settings, modifier_name)
|
||||
|
||||
def _add_modifier(self, test_object, modifier_spec: ModifierSpec):
|
||||
"""
|
||||
Add modifier to object.
|
||||
:param test_object: bpy.types.Object - Blender object to apply modifier on.
|
||||
:param modifier_spec: ModifierSpec - ModifierSpec object with parameters
|
||||
"""
|
||||
bakers_list = ['CLOTH', 'SOFT_BODY', 'DYNAMIC_PAINT', 'FLUID']
|
||||
scene = bpy.context.scene
|
||||
scene.frame_set(1)
|
||||
modifier = test_object.modifiers.new(modifier_spec.modifier_name,
|
||||
modifier_spec.modifier_type)
|
||||
|
||||
if modifier is None:
|
||||
raise Exception("This modifier type is already added on the Test Object, please remove it and try again.")
|
||||
|
||||
if self.verbose:
|
||||
print("Created modifier '{}' of type '{}'.".
|
||||
format(modifier_spec.modifier_name, modifier_spec.modifier_type))
|
||||
|
||||
for param_name in modifier_spec.modifier_parameters:
|
||||
try:
|
||||
setattr(modifier, param_name, modifier_spec.modifier_parameters[param_name])
|
||||
if self.verbose:
|
||||
print("\t set parameter '{}' with value '{}'".
|
||||
format(param_name, modifier_spec.modifier_parameters[param_name]))
|
||||
except AttributeError:
|
||||
# Clean up first
|
||||
bpy.ops.object.delete()
|
||||
raise AttributeError("Modifier '{}' has no parameter named '{}'".
|
||||
format(modifier_spec.modifier_type, param_name))
|
||||
# Special case for Dynamic Paint, need to toggle Canvas on.
|
||||
if modifier.type == "DYNAMIC_PAINT":
|
||||
bpy.ops.dpaint.type_toggle(type='CANVAS')
|
||||
|
||||
if self.apply_modifier:
|
||||
bpy.ops.object.modifier_apply(modifier=modifier_spec.modifier_name)
|
||||
self.set_parameters(modifier, modifier_spec.modifier_parameters)
|
||||
|
||||
if modifier.type in bakers_list:
|
||||
self._bake_current_simulation(test_object, modifier.name, modifier_spec.frame_end)
|
||||
|
||||
scene.frame_set(modifier_spec.frame_end)
|
||||
|
||||
def _apply_modifier(self, test_object, modifier_name):
|
||||
# Modifier automatically gets applied when converting from Curve to Mesh.
|
||||
if test_object.type == 'CURVE':
|
||||
bpy.ops.object.convert(target='MESH')
|
||||
elif test_object.type == 'MESH':
|
||||
bpy.ops.object.modifier_apply(modifier=modifier_name)
|
||||
else:
|
||||
raise Exception("This object type is not yet supported!")
|
||||
|
||||
def _bake_current_simulation(self, test_object, test_modifier_name, frame_end):
|
||||
"""
|
||||
FLUID: Bakes the simulation
|
||||
SOFT BODY, CLOTH, DYNAMIC PAINT: Overrides the point_cache context and then bakes.
|
||||
"""
|
||||
|
||||
def _bake_current_simulation(self, obj, test_mod_type, test_mod_name, frame_end):
|
||||
for scene in bpy.data.scenes:
|
||||
for modifier in obj.modifiers:
|
||||
if modifier.type == test_mod_type:
|
||||
obj.modifiers[test_mod_name].point_cache.frame_end = frame_end
|
||||
override = {'scene': scene, 'active_object': obj, 'point_cache': modifier.point_cache}
|
||||
for modifier in test_object.modifiers:
|
||||
if modifier.type == 'FLUID':
|
||||
bpy.ops.fluid.bake_all()
|
||||
break
|
||||
|
||||
elif modifier.type == 'CLOTH' or modifier.type == 'SOFT_BODY':
|
||||
test_object.modifiers[test_modifier_name].point_cache.frame_end = frame_end
|
||||
override_setting = modifier.point_cache
|
||||
override = {'scene': scene, 'active_object': test_object, 'point_cache': override_setting}
|
||||
bpy.ops.ptcache.bake(override, bake=True)
|
||||
break
|
||||
|
||||
def _apply_physics_settings(self, test_object, physics_spec: PhysicsSpec):
|
||||
elif modifier.type == 'DYNAMIC_PAINT':
|
||||
dynamic_paint_setting = modifier.canvas_settings.canvas_surfaces.active
|
||||
override_setting = dynamic_paint_setting.point_cache
|
||||
override = {'scene': scene, 'active_object': test_object, 'point_cache': override_setting}
|
||||
bpy.ops.ptcache.bake(override, bake=True)
|
||||
break
|
||||
|
||||
def _apply_particle_system(self, test_object, particle_sys_spec: ParticleSystemSpec):
|
||||
"""
|
||||
Apply Physics settings to test objects.
|
||||
Applies Particle System settings to test objects
|
||||
"""
|
||||
scene = bpy.context.scene
|
||||
scene.frame_set(1)
|
||||
modifier = test_object.modifiers.new(physics_spec.modifier_name,
|
||||
physics_spec.modifier_type)
|
||||
physics_setting = modifier.settings
|
||||
bpy.context.scene.frame_set(1)
|
||||
bpy.ops.object.select_all(action='DESELECT')
|
||||
|
||||
test_object.modifiers.new(particle_sys_spec.modifier_name, particle_sys_spec.modifier_type)
|
||||
|
||||
settings_name = test_object.particle_systems.active.settings.name
|
||||
particle_setting = bpy.data.particles[settings_name]
|
||||
if self.verbose:
|
||||
print("Created modifier '{}' of type '{}'.".
|
||||
format(physics_spec.modifier_name, physics_spec.modifier_type))
|
||||
format(particle_sys_spec.modifier_name, particle_sys_spec.modifier_type))
|
||||
|
||||
for param_name in physics_spec.modifier_parameters:
|
||||
for param_name in particle_sys_spec.modifier_parameters:
|
||||
try:
|
||||
setattr(physics_setting, param_name, physics_spec.modifier_parameters[param_name])
|
||||
if param_name == "seed":
|
||||
system_setting = test_object.particle_systems[particle_sys_spec.modifier_name]
|
||||
setattr(system_setting, param_name, particle_sys_spec.modifier_parameters[param_name])
|
||||
else:
|
||||
setattr(particle_setting, param_name, particle_sys_spec.modifier_parameters[param_name])
|
||||
|
||||
if self.verbose:
|
||||
print("\t set parameter '{}' with value '{}'".
|
||||
format(param_name, physics_spec.modifier_parameters[param_name]))
|
||||
format(param_name, particle_sys_spec.modifier_parameters[param_name]))
|
||||
except AttributeError:
|
||||
# Clean up first
|
||||
bpy.ops.object.delete()
|
||||
raise AttributeError("Modifier '{}' has no parameter named '{}'".
|
||||
format(physics_spec.modifier_type, param_name))
|
||||
format(particle_sys_spec.modifier_type, param_name))
|
||||
|
||||
scene.frame_set(physics_spec.frame_end + 1)
|
||||
|
||||
self._bake_current_simulation(
|
||||
test_object,
|
||||
physics_spec.modifier_type,
|
||||
physics_spec.modifier_name,
|
||||
physics_spec.frame_end,
|
||||
)
|
||||
bpy.context.scene.frame_set(particle_sys_spec.frame_end)
|
||||
test_object.select_set(True)
|
||||
bpy.ops.object.duplicates_make_real()
|
||||
test_object.select_set(True)
|
||||
bpy.ops.object.join()
|
||||
if self.apply_modifier:
|
||||
bpy.ops.object.modifier_apply(modifier=physics_spec.modifier_name)
|
||||
self._apply_modifier(test_object, particle_sys_spec.modifier_name)
|
||||
|
||||
def _apply_operator(self, test_object, operator: OperatorSpec):
|
||||
def _apply_operator_edit_mode(self, test_object, operator: OperatorSpecEditMode):
|
||||
"""
|
||||
Apply operator on test object.
|
||||
:param test_object: bpy.types.Object - Blender object to apply operator on.
|
||||
:param operator: OperatorSpec - OperatorSpec object with parameters.
|
||||
:param operator: OperatorSpecEditMode - OperatorSpecEditMode object with parameters.
|
||||
"""
|
||||
mesh = test_object.data
|
||||
bpy.ops.object.mode_set(mode='EDIT')
|
||||
@ -340,15 +457,64 @@ class MeshTest:
|
||||
bpy.ops.object.mode_set(mode='EDIT')
|
||||
bpy.ops.mesh.select_mode(type=operator.select_mode)
|
||||
mesh_operator = getattr(bpy.ops.mesh, operator.operator_name)
|
||||
if not mesh_operator:
|
||||
raise AttributeError("No mesh operator {}".format(operator.operator_name))
|
||||
retval = mesh_operator(**operator.operator_parameters)
|
||||
|
||||
try:
|
||||
retval = mesh_operator(**operator.operator_parameters)
|
||||
except AttributeError:
|
||||
raise AttributeError("bpy.ops.mesh has no attribute {}".format(operator.operator_name))
|
||||
except TypeError as ex:
|
||||
raise TypeError("Incorrect operator parameters {!r} raised {!r}".format(operator.operator_parameters, ex))
|
||||
|
||||
if retval != {'FINISHED'}:
|
||||
raise RuntimeError("Unexpected operator return value: {}".format(retval))
|
||||
if self.verbose:
|
||||
print("Applied {}".format(operator))
|
||||
|
||||
bpy.ops.object.mode_set(mode='OBJECT')
|
||||
|
||||
def _apply_operator_object_mode(self, operator: OperatorSpecObjectMode):
|
||||
"""
|
||||
Applies the object operator.
|
||||
"""
|
||||
bpy.ops.object.mode_set(mode='OBJECT')
|
||||
object_operator = getattr(bpy.ops.object, operator.operator_name)
|
||||
|
||||
try:
|
||||
retval = object_operator(**operator.operator_parameters)
|
||||
except AttributeError:
|
||||
raise AttributeError("bpy.ops.mesh has no attribute {}".format(operator.operator_name))
|
||||
except TypeError as ex:
|
||||
raise TypeError("Incorrect operator parameters {!r} raised {!r}".format(operator.operator_parameters, ex))
|
||||
|
||||
if retval != {'FINISHED'}:
|
||||
raise RuntimeError("Unexpected operator return value: {}".format(retval))
|
||||
if self.verbose:
|
||||
print("Applied operator {}".format(operator))
|
||||
|
||||
def _apply_deform_modifier(self, test_object, operation: list):
|
||||
"""
|
||||
param: operation: list: List of modifiers or combination of modifier and object operator.
|
||||
"""
|
||||
|
||||
scene = bpy.context.scene
|
||||
scene.frame_set(1)
|
||||
bpy.ops.object.mode_set(mode='OBJECT')
|
||||
modifier_operations_list = operation.modifier_list
|
||||
modifier_names = []
|
||||
object_operations = operation.object_operator_spec
|
||||
for modifier_operations in modifier_operations_list:
|
||||
if isinstance(modifier_operations, ModifierSpec):
|
||||
self._add_modifier(test_object, modifier_operations)
|
||||
modifier_names.append(modifier_operations.modifier_name)
|
||||
|
||||
if isinstance(object_operations, OperatorSpecObjectMode):
|
||||
self._apply_operator_object_mode(object_operations)
|
||||
|
||||
scene.frame_set(operation.frame_number)
|
||||
|
||||
if self.apply_modifier:
|
||||
for mod_name in modifier_names:
|
||||
self._apply_modifier(test_object, mod_name)
|
||||
|
||||
def run_test(self):
|
||||
"""
|
||||
@ -369,24 +535,40 @@ class MeshTest:
|
||||
evaluated_test_object = bpy.context.active_object
|
||||
evaluated_test_object.name = "evaluated_object"
|
||||
if self.verbose:
|
||||
print()
|
||||
print(evaluated_test_object.name, "is set to active")
|
||||
|
||||
# Add modifiers and operators.
|
||||
for operation in self.operations_stack:
|
||||
if isinstance(operation, ModifierSpec):
|
||||
self._apply_modifier(evaluated_test_object, operation)
|
||||
self._add_modifier(evaluated_test_object, operation)
|
||||
if self.apply_modifier:
|
||||
self._apply_modifier(evaluated_test_object, operation.modifier_name)
|
||||
|
||||
elif isinstance(operation, OperatorSpec):
|
||||
self._apply_operator(evaluated_test_object, operation)
|
||||
elif isinstance(operation, OperatorSpecEditMode):
|
||||
self._apply_operator_edit_mode(evaluated_test_object, operation)
|
||||
|
||||
elif isinstance(operation, OperatorSpecObjectMode):
|
||||
self._apply_operator_object_mode(operation)
|
||||
|
||||
elif isinstance(operation, DeformModifierSpec):
|
||||
self._apply_deform_modifier(evaluated_test_object, operation)
|
||||
|
||||
elif isinstance(operation, ParticleSystemSpec):
|
||||
self._apply_particle_system(evaluated_test_object, operation)
|
||||
|
||||
elif isinstance(operation, PhysicsSpec):
|
||||
self._apply_physics_settings(evaluated_test_object, operation)
|
||||
else:
|
||||
raise ValueError("Expected operation of type {} or {} or {}. Got {}".
|
||||
format(type(ModifierSpec), type(OperatorSpec), type(PhysicsSpec),
|
||||
type(operation)))
|
||||
raise ValueError("Expected operation of type {} or {} or {} or {}. Got {}".
|
||||
format(type(ModifierSpec), type(OperatorSpecEditMode),
|
||||
type(OperatorSpecObjectMode), type(ParticleSystemSpec), type(operation)))
|
||||
|
||||
# Compare resulting mesh with expected one.
|
||||
# Compare only when self.do_compare is set to True, it is set to False for run-test and returns.
|
||||
if not self.do_compare:
|
||||
print("Meshes/objects are not compared, compare evaluated and expected object in Blender for "
|
||||
"visualization only.")
|
||||
return False
|
||||
|
||||
if self.verbose:
|
||||
print("Comparing expected mesh with resulting mesh...")
|
||||
evaluated_test_mesh = evaluated_test_object.data
|
||||
@ -415,90 +597,7 @@ class MeshTest:
|
||||
return self._on_failed_test(compare_result, validation_success, evaluated_test_object)
|
||||
|
||||
|
||||
class OperatorTest:
|
||||
"""
|
||||
Helper class that stores and executes operator tests.
|
||||
|
||||
Example usage:
|
||||
|
||||
>>> tests = [
|
||||
>>> ['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecube', 'Cubecube_result_1', 'intersect_boolean', {'operation': 'UNION'}],
|
||||
>>> ['FACE', {0, 1, 2, 3, 4, 5}, 'Cubecube', 'Cubecube_result_2', 'intersect_boolean', {'operation': 'INTERSECT'}],
|
||||
>>> ]
|
||||
>>> operator_test = OperatorTest(tests)
|
||||
>>> operator_test.run_all_tests()
|
||||
"""
|
||||
|
||||
def __init__(self, operator_tests):
|
||||
"""
|
||||
Constructs an operator test.
|
||||
:param operator_tests: list - list of operator test cases. Each element in the list must contain the following
|
||||
in the correct order:
|
||||
1) select_mode: str - mesh selection mode, must be either 'VERT', 'EDGE' or 'FACE'
|
||||
2) selection: set - set of vertices/edges/faces indices to select, e.g. [0, 9, 10].
|
||||
3) test_object_name: bpy.Types.Object - test object
|
||||
4) expected_object_name: bpy.Types.Object - expected object
|
||||
5) operator_name: str - name of mesh operator from bpy.ops.mesh, e.g. "bevel" or "fill"
|
||||
6) operator_parameters: dict - {name : val} dictionary containing operator parameters.
|
||||
"""
|
||||
self.operator_tests = operator_tests
|
||||
self.verbose = os.environ.get("BLENDER_VERBOSE") is not None
|
||||
self._failed_tests_list = []
|
||||
|
||||
def run_test(self, index: int):
|
||||
"""
|
||||
Run a single test from operator_tests list
|
||||
:param index: int - index of test
|
||||
:return: bool - True if test is successful. False otherwise.
|
||||
"""
|
||||
case = self.operator_tests[index]
|
||||
if len(case) != 6:
|
||||
raise ValueError("Expected exactly 6 parameters for each test case, got {}".format(len(case)))
|
||||
select_mode = case[0]
|
||||
selection = case[1]
|
||||
test_object_name = case[2]
|
||||
expected_object_name = case[3]
|
||||
operator_name = case[4]
|
||||
operator_parameters = case[5]
|
||||
|
||||
operator_spec = OperatorSpec(operator_name, operator_parameters, select_mode, selection)
|
||||
|
||||
test = MeshTest(test_object_name, expected_object_name)
|
||||
test.add_operator(operator_spec)
|
||||
|
||||
success = test.run_test()
|
||||
if test.is_test_updated():
|
||||
# Run the test again if the blend file has been updated.
|
||||
success = test.run_test()
|
||||
return success
|
||||
|
||||
def run_all_tests(self):
|
||||
for index, _ in enumerate(self.operator_tests):
|
||||
if self.verbose:
|
||||
print()
|
||||
print("Running test {}...".format(index))
|
||||
success = self.run_test(index)
|
||||
|
||||
if not success:
|
||||
self._failed_tests_list.append(index)
|
||||
|
||||
if len(self._failed_tests_list) != 0:
|
||||
print("Following tests failed: {}".format(self._failed_tests_list))
|
||||
|
||||
blender_path = bpy.app.binary_path
|
||||
blend_path = bpy.data.filepath
|
||||
frame = inspect.stack()[1]
|
||||
module = inspect.getmodule(frame[0])
|
||||
python_path = module.__file__
|
||||
|
||||
print("Run following command to open Blender and run the failing test:")
|
||||
print("{} {} --python {} -- {} {}"
|
||||
.format(blender_path, blend_path, python_path, "--run-test", "<test_index>"))
|
||||
|
||||
raise Exception("Tests {} failed".format(self._failed_tests_list))
|
||||
|
||||
|
||||
class ModifierTest:
|
||||
class RunTest:
|
||||
"""
|
||||
Helper class that stores and executes modifier tests.
|
||||
|
||||
@ -508,71 +607,70 @@ class ModifierTest:
|
||||
>>> ModifierSpec("firstSUBSURF", "SUBSURF", {"quality": 5}),
|
||||
>>> ModifierSpec("firstSOLIDIFY", "SOLIDIFY", {"thickness_clamp": 0.9, "thickness": 1})
|
||||
>>> ]
|
||||
>>> tests = [
|
||||
>>> ["testCube", "expectedCube", modifier_list],
|
||||
>>> ["testCube_2", "expectedCube_2", modifier_list]
|
||||
>>> operator_list = [
|
||||
>>> OperatorSpecEditMode("delete_edgeloop", {}, "EDGE", MONKEY_LOOP_EDGE),
|
||||
>>> ]
|
||||
>>> modifiers_test = ModifierTest(tests)
|
||||
>>> tests = [
|
||||
>>> MeshTest("Test1", "testCube", "expectedCube", modifier_list),
|
||||
>>> MeshTest("Test2", "testCube_2", "expectedCube_2", modifier_list),
|
||||
>>> MeshTest("MonkeyDeleteEdge", "testMonkey","expectedMonkey", operator_list)
|
||||
>>> ]
|
||||
>>> modifiers_test = RunTest(tests)
|
||||
>>> modifiers_test.run_all_tests()
|
||||
"""
|
||||
|
||||
def __init__(self, modifier_tests: list, apply_modifiers=False, threshold=None):
|
||||
def __init__(self, tests, apply_modifiers=False, do_compare=False):
|
||||
"""
|
||||
Construct a modifier test.
|
||||
:param modifier_tests: list - list of modifier test cases. Each element in the list must contain the following
|
||||
:param tests: list - list of modifier or operator test cases. Each element in the list must contain the
|
||||
following
|
||||
in the correct order:
|
||||
0) test_name: str - unique test name
|
||||
1) test_object_name: bpy.Types.Object - test object
|
||||
2) expected_object_name: bpy.Types.Object - expected object
|
||||
3) modifiers: list - list of mesh_test.ModifierSpec objects.
|
||||
3) modifiers or operators: list - list of mesh_test.ModifierSpec objects or
|
||||
mesh_test.OperatorSpecEditMode objects
|
||||
"""
|
||||
self.modifier_tests = modifier_tests
|
||||
self.tests = tests
|
||||
self._ensure_unique_test_name_or_raise_error()
|
||||
self.apply_modifiers = apply_modifiers
|
||||
self.threshold = threshold
|
||||
self.do_compare = do_compare
|
||||
self.verbose = os.environ.get("BLENDER_VERBOSE") is not None
|
||||
self._failed_tests_list = []
|
||||
|
||||
def run_test(self, index: int):
|
||||
def _ensure_unique_test_name_or_raise_error(self):
|
||||
"""
|
||||
Run a single test from self.modifier_tests list
|
||||
:param index: int - index of test
|
||||
:return: bool - True if test passed, False otherwise.
|
||||
Check if the test name is unique else raise an error.
|
||||
"""
|
||||
case = self.modifier_tests[index]
|
||||
if len(case) != 3:
|
||||
raise ValueError("Expected exactly 3 parameters for each test case, got {}".format(len(case)))
|
||||
test_object_name = case[0]
|
||||
expected_object_name = case[1]
|
||||
spec_list = case[2]
|
||||
all_test_names = []
|
||||
for each_test in self.tests:
|
||||
test_name = each_test.test_name
|
||||
all_test_names.append(test_name)
|
||||
|
||||
test = MeshTest(test_object_name, expected_object_name, threshold=self.threshold)
|
||||
if self.apply_modifiers:
|
||||
test.apply_modifier = True
|
||||
|
||||
for modifier_spec in spec_list:
|
||||
test.add_modifier(modifier_spec)
|
||||
|
||||
success = test.run_test()
|
||||
if test.is_test_updated():
|
||||
# Run the test again if the blend file has been updated.
|
||||
success = test.run_test()
|
||||
|
||||
return success
|
||||
seen_name = set()
|
||||
for ele in all_test_names:
|
||||
if ele in seen_name:
|
||||
raise ValueError("{} is a duplicate, write a new unique name.".format(ele))
|
||||
else:
|
||||
seen_name.add(ele)
|
||||
|
||||
def run_all_tests(self):
|
||||
"""
|
||||
Run all tests in self.modifiers_tests list. Raises an exception if one the tests fails.
|
||||
Run all tests in self.tests list. Raises an exception if one the tests fails.
|
||||
"""
|
||||
for index, _ in enumerate(self.modifier_tests):
|
||||
for test_number, each_test in enumerate(self.tests):
|
||||
test_name = each_test.test_name
|
||||
if self.verbose:
|
||||
print()
|
||||
print("Running test {}...\n".format(index))
|
||||
success = self.run_test(index)
|
||||
print("Running test {}...".format(test_number))
|
||||
print("Test name {}\n".format(test_name))
|
||||
success = self.run_test(test_name)
|
||||
|
||||
if not success:
|
||||
self._failed_tests_list.append(index)
|
||||
self._failed_tests_list.append(test_name)
|
||||
|
||||
if len(self._failed_tests_list) != 0:
|
||||
print("Following tests failed: {}".format(self._failed_tests_list))
|
||||
print("\nFollowing tests failed: {}".format(self._failed_tests_list))
|
||||
|
||||
blender_path = bpy.app.binary_path
|
||||
blend_path = bpy.data.filepath
|
||||
@ -582,6 +680,35 @@ class ModifierTest:
|
||||
|
||||
print("Run following command to open Blender and run the failing test:")
|
||||
print("{} {} --python {} -- {} {}"
|
||||
.format(blender_path, blend_path, python_path, "--run-test", "<test_index>"))
|
||||
.format(blender_path, blend_path, python_path, "--run-test", "<test_name>"))
|
||||
|
||||
raise Exception("Tests {} failed".format(self._failed_tests_list))
|
||||
|
||||
def run_test(self, test_name: str):
|
||||
"""
|
||||
Run a single test from self.tests list
|
||||
:param test_name: int - name of test
|
||||
:return: bool - True if test passed, False otherwise.
|
||||
"""
|
||||
case = None
|
||||
for index, each_test in enumerate(self.tests):
|
||||
if test_name == each_test.test_name:
|
||||
case = self.tests[index]
|
||||
break
|
||||
|
||||
if case is None:
|
||||
raise Exception('No test called {} found!'.format(test_name))
|
||||
|
||||
test = case
|
||||
if self.apply_modifiers:
|
||||
test.apply_modifier = True
|
||||
|
||||
if self.do_compare:
|
||||
test.do_compare = True
|
||||
|
||||
success = test.run_test()
|
||||
if test.is_test_updated():
|
||||
# Run the test again if the blend file has been updated.
|
||||
success = test.run_test()
|
||||
|
||||
return success
|
||||
|
@ -26,7 +26,7 @@ from random import shuffle, seed
|
||||
seed(0)
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import OperatorTest, OperatorSpec
|
||||
from modules.mesh_test import MeshTest, OperatorSpecEditMode, RunTest
|
||||
|
||||
# Central vertical loop of Suzanne
|
||||
MONKEY_LOOP_VERT = {68, 69, 71, 73, 74, 75, 76, 77, 90, 129, 136, 175, 188, 189, 198, 207,
|
||||
@ -39,126 +39,181 @@ def main():
|
||||
tests = [
|
||||
#### 0
|
||||
# bisect
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, "testCubeBisect", "expectedCubeBisect", "bisect",
|
||||
{"plane_co": (0, 0, 0), "plane_no": (0, 1, 1), "clear_inner": True, "use_fill": True}],
|
||||
MeshTest("CubeBisect", "testCubeBisect", "expectedCubeBisect",
|
||||
[OperatorSpecEditMode("bisect",
|
||||
{"plane_co": (0, 0, 0), "plane_no": (0, 1, 1), "clear_inner": True,
|
||||
"use_fill": True}, 'FACE', {0, 1, 2, 3, 4, 5}, )]),
|
||||
|
||||
# blend from shape
|
||||
['FACE', {0, 1, 2, 3, 4, 5}, "testCubeBlendFromShape", "expectedCubeBlendFromShape", "blend_from_shape",
|
||||
{"shape": "Key 1"}],
|
||||
MeshTest("CubeBlendFromShape", "testCubeBlendFromShape", "expectedCubeBlendFromShape",
|
||||
[OperatorSpecEditMode("blend_from_shape", {"shape": "Key 1"}, 'FACE', {0, 1, 2, 3, 4, 5})]),
|
||||
|
||||
# bridge edge loops
|
||||
["FACE", {0, 1}, "testCubeBrigeEdgeLoop", "expectedCubeBridgeEdgeLoop", "bridge_edge_loops", {}],
|
||||
MeshTest("CubeBridgeEdgeLoop", "testCubeBrigeEdgeLoop", "expectedCubeBridgeEdgeLoop",
|
||||
[OperatorSpecEditMode("bridge_edge_loops", {}, "FACE", {0, 1})]),
|
||||
|
||||
# decimate
|
||||
["FACE", {i for i in range(500)}, "testMonkeyDecimate", "expectedMonkeyDecimate", "decimate", {"ratio": 0.1}],
|
||||
MeshTest("MonkeyDecimate", "testMonkeyDecimate", "expectedMonkeyDecimate",
|
||||
[OperatorSpecEditMode("decimate",
|
||||
{"ratio": 0.1}, "FACE", {i for i in range(500)})]),
|
||||
|
||||
### 4
|
||||
# delete
|
||||
["VERT", {3}, "testCubeDeleteVertices", "expectedCubeDeleteVertices", "delete", {}],
|
||||
["FACE", {0}, "testCubeDeleteFaces", "expectedCubeDeleteFaces", "delete", {}],
|
||||
["EDGE", {0, 1, 2, 3}, "testCubeDeleteEdges", "expectedCubeDeleteEdges", "delete", {}],
|
||||
MeshTest("CubeDeleteVertices", "testCubeDeleteVertices", "expectedCubeDeleteVertices",
|
||||
[OperatorSpecEditMode("delete", {}, "VERT", {3})]),
|
||||
MeshTest("CubeDeleteFaces", "testCubeDeleteFaces", "expectedCubeDeleteFaces",
|
||||
[OperatorSpecEditMode("delete", {}, "FACE", {0})]),
|
||||
MeshTest("CubeDeleteEdges", "testCubeDeleteEdges", "expectedCubeDeleteEdges",
|
||||
[OperatorSpecEditMode("delete", {}, "EDGE", {0, 1, 2, 3})]),
|
||||
|
||||
# delete edge loop
|
||||
["VERT", MONKEY_LOOP_VERT, "testMokneyDeleteEdgeLoopVertices", "expectedMonkeyDeleteEdgeLoopVertices",
|
||||
"delete_edgeloop", {}],
|
||||
["EDGE", MONKEY_LOOP_EDGE, "testMokneyDeleteEdgeLoopEdges", "expectedMonkeyDeleteEdgeLoopEdges",
|
||||
"delete_edgeloop", {}],
|
||||
MeshTest("MonkeyDeleteEdgeLoopVertices", "testMokneyDeleteEdgeLoopVertices",
|
||||
"expectedMonkeyDeleteEdgeLoopVertices",
|
||||
[OperatorSpecEditMode("delete_edgeloop", {}, "VERT", MONKEY_LOOP_VERT)]),
|
||||
|
||||
MeshTest("MonkeyDeleteEdgeLoopEdges", "testMokneyDeleteEdgeLoopEdges",
|
||||
"expectedMonkeyDeleteEdgeLoopEdges",
|
||||
[OperatorSpecEditMode("delete_edgeloop", {}, "EDGE", MONKEY_LOOP_EDGE)]),
|
||||
|
||||
### 9
|
||||
# delete loose
|
||||
["VERT", {i for i in range(12)}, "testCubeDeleteLooseVertices", "expectedCubeDeleteLooseVertices",
|
||||
"delete_loose", {"use_verts": True, "use_edges": False, "use_faces": False}],
|
||||
["EDGE", {i for i in range(14)}, "testCubeDeleteLooseEdges", "expectedCubeDeleteLooseEdges",
|
||||
"delete_loose", {"use_verts": False, "use_edges": True, "use_faces": False}],
|
||||
["FACE", {i for i in range(7)}, "testCubeDeleteLooseFaces", "expectedCubeDeleteLooseFaces",
|
||||
"delete_loose", {"use_verts": False, "use_edges": False, "use_faces": True}],
|
||||
MeshTest("CubeDeleteLooseVertices", "testCubeDeleteLooseVertices",
|
||||
"expectedCubeDeleteLooseVertices",
|
||||
[OperatorSpecEditMode("delete_loose", {"use_verts": True, "use_edges": False, "use_faces": False},
|
||||
"VERT",
|
||||
{i for i in range(12)})]),
|
||||
MeshTest("CubeDeleteLooseEdges", "testCubeDeleteLooseEdges",
|
||||
"expectedCubeDeleteLooseEdges",
|
||||
[OperatorSpecEditMode("delete_loose", {"use_verts": False, "use_edges": True, "use_faces": False},
|
||||
"EDGE",
|
||||
{i for i in range(14)})]),
|
||||
MeshTest("CubeDeleteLooseFaces", "testCubeDeleteLooseFaces",
|
||||
"expectedCubeDeleteLooseFaces",
|
||||
[OperatorSpecEditMode("delete_loose", {"use_verts": False, "use_edges": False, "use_faces": True},
|
||||
"FACE",
|
||||
{i for i in range(7)})]),
|
||||
|
||||
# dissolve degenerate
|
||||
["VERT", {i for i in range(8)}, "testCubeDissolveDegenerate", "expectedCubeDissolveDegenerate",
|
||||
"dissolve_degenerate", {}],
|
||||
MeshTest("CubeDissolveDegenerate", "testCubeDissolveDegenerate",
|
||||
"expectedCubeDissolveDegenerate",
|
||||
[OperatorSpecEditMode("dissolve_degenerate", {}, "VERT", {i for i in range(8)})]),
|
||||
|
||||
### 13
|
||||
# dissolve edges
|
||||
["EDGE", {0, 5, 6, 9}, "testCylinderDissolveEdges", "expectedCylinderDissolveEdges",
|
||||
"dissolve_edges", {}],
|
||||
MeshTest("CylinderDissolveEdges", "testCylinderDissolveEdges", "expectedCylinderDissolveEdges",
|
||||
[OperatorSpecEditMode("dissolve_edges", {}, "EDGE", {0, 5, 6, 9})]),
|
||||
|
||||
# dissolve faces
|
||||
["VERT", {5, 34, 47, 49, 83, 91, 95}, "testCubeDissolveFaces", "expectedCubeDissolveFaces", "dissolve_faces",
|
||||
{}],
|
||||
MeshTest("CubeDissolveFaces", "testCubeDissolveFaces", "expectedCubeDissolveFaces",
|
||||
[OperatorSpecEditMode("dissolve_faces", {}, "VERT", {5, 34, 47, 49, 83, 91, 95})]),
|
||||
|
||||
### 15
|
||||
# dissolve verts
|
||||
["VERT", {16, 20, 22, 23, 25}, "testCubeDissolveVerts", "expectedCubeDissolveVerts", "dissolve_verts", {}],
|
||||
MeshTest("CubeDissolveVerts", "testCubeDissolveVerts", "expectedCubeDissolveVerts",
|
||||
[OperatorSpecEditMode("dissolve_verts", {}, "VERT", {16, 20, 22, 23, 25})]),
|
||||
|
||||
# duplicate
|
||||
["VERT", {i for i in range(33)} - {23}, "testConeDuplicateVertices", "expectedConeDuplicateVertices",
|
||||
"duplicate", {}],
|
||||
["VERT", {23}, "testConeDuplicateOneVertex", "expectedConeDuplicateOneVertex", "duplicate", {}],
|
||||
["FACE", {6, 9}, "testConeDuplicateFaces", "expectedConeDuplicateFaces", "duplicate", {}],
|
||||
["EDGE", {i for i in range(64)}, "testConeDuplicateEdges", "expectedConeDuplicateEdges", "duplicate", {}],
|
||||
MeshTest("ConeDuplicateVertices", "testConeDuplicateVertices",
|
||||
"expectedConeDuplicateVertices",
|
||||
[OperatorSpecEditMode("duplicate", {}, "VERT", {i for i in range(33)} - {23})]),
|
||||
|
||||
MeshTest("ConeDuplicateOneVertex", "testConeDuplicateOneVertex", "expectedConeDuplicateOneVertex",
|
||||
[OperatorSpecEditMode("duplicate", {}, "VERT", {23})]),
|
||||
MeshTest("ConeDuplicateFaces", "testConeDuplicateFaces", "expectedConeDuplicateFaces",
|
||||
[OperatorSpecEditMode("duplicate", {}, "FACE", {6, 9})]),
|
||||
MeshTest("ConeDuplicateEdges", "testConeDuplicateEdges", "expectedConeDuplicateEdges",
|
||||
[OperatorSpecEditMode("duplicate", {}, "EDGE", {i for i in range(64)})]),
|
||||
|
||||
### 20
|
||||
# edge collapse
|
||||
["EDGE", {1, 9, 4}, "testCylinderEdgeCollapse", "expectedCylinderEdgeCollapse", "edge_collapse", {}],
|
||||
MeshTest("CylinderEdgeCollapse", "testCylinderEdgeCollapse", "expectedCylinderEdgeCollapse",
|
||||
[OperatorSpecEditMode("edge_collapse", {}, "EDGE", {1, 9, 4})]),
|
||||
|
||||
# edge face add
|
||||
["VERT", {1, 3, 4, 5, 7}, "testCubeEdgeFaceAddFace", "expectedCubeEdgeFaceAddFace", "edge_face_add", {}],
|
||||
["VERT", {4, 5}, "testCubeEdgeFaceAddEdge", "expectedCubeEdgeFaceAddEdge", "edge_face_add", {}],
|
||||
MeshTest("CubeEdgeFaceAddFace", "testCubeEdgeFaceAddFace", "expectedCubeEdgeFaceAddFace",
|
||||
[OperatorSpecEditMode("edge_face_add", {}, "VERT", {1, 3, 4, 5, 7})]),
|
||||
MeshTest("CubeEdgeFaceAddEdge", "testCubeEdgeFaceAddEdge", "expectedCubeEdgeFaceAddEdge",
|
||||
[OperatorSpecEditMode("edge_face_add", {}, "VERT", {4, 5})]),
|
||||
|
||||
# edge rotate
|
||||
["EDGE", {1}, "testCubeEdgeRotate", "expectedCubeEdgeRotate", "edge_rotate", {}],
|
||||
MeshTest("CubeEdgeRotate", "testCubeEdgeRotate", "expectedCubeEdgeRotate",
|
||||
[OperatorSpecEditMode("edge_rotate", {}, "EDGE", {1})]),
|
||||
|
||||
# edge split
|
||||
["EDGE", {2, 5, 8, 11, 14, 17, 20, 23}, "testCubeEdgeSplit", "expectedCubeEdgeSplit", "edge_split", {}],
|
||||
MeshTest("CubeEdgeSplit", "testCubeEdgeSplit", "expectedCubeEdgeSplit",
|
||||
[OperatorSpecEditMode("edge_split", {}, "EDGE", {2, 5, 8, 11, 14, 17, 20, 23})]),
|
||||
|
||||
### 25
|
||||
# face make planar
|
||||
["FACE", {i for i in range(500)}, "testMonkeyFaceMakePlanar", "expectedMonkeyFaceMakePlanar",
|
||||
"face_make_planar", {}],
|
||||
MeshTest("MonkeyFaceMakePlanar", "testMonkeyFaceMakePlanar",
|
||||
"expectedMonkeyFaceMakePlanar",
|
||||
[OperatorSpecEditMode("face_make_planar", {}, "FACE", {i for i in range(500)})]),
|
||||
|
||||
# face split by edges
|
||||
["VERT", {i for i in range(6)}, "testPlaneFaceSplitByEdges", "expectedPlaneFaceSplitByEdges",
|
||||
"face_split_by_edges", {}],
|
||||
MeshTest("PlaneFaceSplitByEdges", "testPlaneFaceSplitByEdges",
|
||||
"expectedPlaneFaceSplitByEdges",
|
||||
[OperatorSpecEditMode("face_split_by_edges", {}, "VERT", {i for i in range(6)})]),
|
||||
|
||||
# fill
|
||||
["EDGE", {20, 21, 22, 23, 24, 45, 46, 47, 48, 49}, "testIcosphereFill", "expectedIcosphereFill",
|
||||
"fill", {}],
|
||||
["EDGE", {20, 21, 22, 23, 24, 45, 46, 47, 48, 49}, "testIcosphereFillUseBeautyFalse",
|
||||
"expectedIcosphereFillUseBeautyFalse", "fill", {"use_beauty": False}],
|
||||
MeshTest("IcosphereFill", "testIcosphereFill", "expectedIcosphereFill",
|
||||
[OperatorSpecEditMode("fill", {}, "EDGE", {20, 21, 22, 23, 24, 45, 46, 47, 48, 49})]),
|
||||
MeshTest("IcosphereFillUseBeautyFalse",
|
||||
"testIcosphereFillUseBeautyFalse", "expectedIcosphereFillUseBeautyFalse",
|
||||
[OperatorSpecEditMode("fill", {"use_beauty": False}, "EDGE",
|
||||
{20, 21, 22, 23, 24, 45, 46, 47, 48, 49})]),
|
||||
|
||||
# fill grid
|
||||
["EDGE", {1, 2, 3, 4, 5, 7, 9, 10, 11, 12, 13, 15}, "testPlaneFillGrid", "expectedPlaneFillGrid",
|
||||
"fill_grid", {}],
|
||||
["EDGE", {1, 2, 3, 4, 5, 7, 9, 10, 11, 12, 13, 15}, "testPlaneFillGridSimpleBlending",
|
||||
"expectedPlaneFillGridSimpleBlending", "fill_grid", {"use_interp_simple": True}],
|
||||
MeshTest("PlaneFillGrid", "testPlaneFillGrid",
|
||||
"expectedPlaneFillGrid",
|
||||
[OperatorSpecEditMode("fill_grid", {}, "EDGE", {1, 2, 3, 4, 5, 7, 9, 10, 11, 12, 13, 15})]),
|
||||
|
||||
MeshTest("PlaneFillGridSimpleBlending",
|
||||
"testPlaneFillGridSimpleBlending",
|
||||
"expectedPlaneFillGridSimpleBlending",
|
||||
[OperatorSpecEditMode("fill_grid", {"use_interp_simple": True}, "EDGE",
|
||||
{1, 2, 3, 4, 5, 7, 9, 10, 11, 12, 13, 15})]),
|
||||
|
||||
### 31
|
||||
# fill holes
|
||||
["VERT", {i for i in range(481)}, "testSphereFillHoles", "expectedSphereFillHoles", "fill_holes", {"sides": 9}],
|
||||
MeshTest("SphereFillHoles", "testSphereFillHoles", "expectedSphereFillHoles",
|
||||
[OperatorSpecEditMode("fill_holes", {"sides": 9}, "VERT", {i for i in range(481)})]),
|
||||
|
||||
# inset faces
|
||||
["VERT", {5, 16, 17, 19, 20, 22, 23, 34, 47, 49, 50, 52, 59, 61, 62, 65, 83, 91, 95}, "testCubeInset",
|
||||
"expectedCubeInset", "inset", {"thickness": 0.2}],
|
||||
["VERT", {5, 16, 17, 19, 20, 22, 23, 34, 47, 49, 50, 52, 59, 61, 62, 65, 83, 91, 95},
|
||||
"testCubeInsetEvenOffsetFalse", "expectedCubeInsetEvenOffsetFalse",
|
||||
"inset", {"thickness": 0.2, "use_even_offset": False}],
|
||||
["VERT", {5, 16, 17, 19, 20, 22, 23, 34, 47, 49, 50, 52, 59, 61, 62, 65, 83, 91, 95}, "testCubeInsetDepth",
|
||||
"expectedCubeInsetDepth", "inset", {"thickness": 0.2, "depth": 0.2}],
|
||||
["FACE", {35, 36, 37, 45, 46, 47, 55, 56, 57}, "testGridInsetRelativeOffset", "expectedGridInsetRelativeOffset",
|
||||
"inset", {"thickness": 0.4, "use_relative_offset": True}],
|
||||
MeshTest("CubeInset",
|
||||
"testCubeInset", "expectedCubeInset", [OperatorSpecEditMode("inset", {"thickness": 0.2}, "VERT",
|
||||
{5, 16, 17, 19, 20, 22, 23, 34, 47, 49, 50,
|
||||
52,
|
||||
59, 61, 62, 65, 83, 91, 95})]),
|
||||
|
||||
MeshTest("CubeInsetEvenOffsetFalse",
|
||||
"testCubeInsetEvenOffsetFalse", "expectedCubeInsetEvenOffsetFalse",
|
||||
[OperatorSpecEditMode("inset", {"thickness": 0.2, "use_even_offset": False}, "VERT",
|
||||
{5, 16, 17, 19, 20, 22, 23, 34, 47, 49, 50, 52, 59, 61, 62, 65, 83, 91, 95})]),
|
||||
MeshTest("CubeInsetDepth",
|
||||
"testCubeInsetDepth",
|
||||
"expectedCubeInsetDepth", [OperatorSpecEditMode("inset", {"thickness": 0.2, "depth": 0.2}, "VERT",
|
||||
{5, 16, 17, 19, 20, 22, 23, 34, 47, 49, 50, 52, 59, 61,
|
||||
62,
|
||||
65, 83, 91, 95})]),
|
||||
MeshTest("GridInsetRelativeOffset", "testGridInsetRelativeOffset",
|
||||
"expectedGridInsetRelativeOffset",
|
||||
[OperatorSpecEditMode("inset", {"thickness": 0.4,
|
||||
"use_relative_offset": True}, "FACE",
|
||||
{35, 36, 37, 45, 46, 47, 55, 56, 57})]),
|
||||
]
|
||||
|
||||
operators_test = OperatorTest(tests)
|
||||
operators_test = RunTest(tests)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
operators_test.do_compare = True
|
||||
operators_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
operators_test.apply_modifiers = False
|
||||
index = int(command[i + 1])
|
||||
operators_test.run_test(index)
|
||||
operators_test.do_compare = False
|
||||
name = command[i + 1]
|
||||
operators_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
|
@ -24,26 +24,42 @@ import sys
|
||||
import bpy
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import ModifierTest, PhysicsSpec
|
||||
from modules.mesh_test import RunTest, ModifierSpec, MeshTest
|
||||
|
||||
|
||||
def main():
|
||||
test = [
|
||||
["testCloth", "expectedCloth",
|
||||
[PhysicsSpec('Cloth', 'CLOTH', {'quality': 5}, 35)]],
|
||||
|
||||
MeshTest("ClothSimple", "testClothPlane", "expectedClothPlane",
|
||||
[ModifierSpec('Cloth', 'CLOTH', {'settings': {'quality': 5}}, 15)], threshold=1e-3),
|
||||
|
||||
# Not reproducible
|
||||
# MeshTest("ClothPressure", "testObjClothPressure", "expObjClothPressure",
|
||||
# [ModifierSpec('Cloth2', 'CLOTH', {'settings': {'use_pressure': True,
|
||||
# 'uniform_pressure_force': 1}}, 16)]),
|
||||
|
||||
# Not reproducible
|
||||
# MeshTest("ClothSelfCollision", "testClothCollision", "expClothCollision",
|
||||
# [ModifierSpec('Cloth', 'CLOTH', {'collision_settings': {'use_self_collision': True}}, 67)]),
|
||||
|
||||
MeshTest("ClothSpring", "testTorusClothSpring", "expTorusClothSpring",
|
||||
[ModifierSpec('Cloth2', 'CLOTH', {'settings': {'use_internal_springs': True}}, 10)], threshold=1e-3),
|
||||
|
||||
]
|
||||
cloth_test = ModifierTest(test, threshold=1e-3)
|
||||
cloth_test = RunTest(test)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
cloth_test.apply_modifiers = True
|
||||
cloth_test.do_compare = True
|
||||
cloth_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
cloth_test.apply_modifiers = False
|
||||
index = int(command[i + 1])
|
||||
cloth_test.run_test(index)
|
||||
cloth_test.do_compare = False
|
||||
name = command[i + 1]
|
||||
cloth_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
|
58
tests/python/physics_dynamic_paint.py
Normal file
58
tests/python/physics_dynamic_paint.py
Normal file
@ -0,0 +1,58 @@
|
||||
# ##### BEGIN GPL LICENSE BLOCK #####
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License
|
||||
# as published by the Free Software Foundation; either version 2
|
||||
# of the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software Foundation,
|
||||
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
||||
#
|
||||
# ##### END GPL LICENSE BLOCK #####
|
||||
|
||||
# <pep8 compliant>
|
||||
|
||||
import os
|
||||
import sys
|
||||
|
||||
import bpy
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import RunTest, ModifierSpec, MeshTest
|
||||
|
||||
|
||||
def main():
|
||||
test = [
|
||||
|
||||
MeshTest("DynamicPaintSimple", "testObjDynamicPaintPlane", "expObjDynamicPaintPlane",
|
||||
[ModifierSpec('dynamic_paint', 'DYNAMIC_PAINT',
|
||||
{'ui_type': 'CANVAS',
|
||||
'canvas_settings': {'canvas_surfaces': {'surface_type': 'WAVE', 'frame_end': 15}}},
|
||||
15)]),
|
||||
|
||||
]
|
||||
dynamic_paint_test = RunTest(test)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
dynamic_paint_test.apply_modifiers = True
|
||||
dynamic_paint_test.do_compare = True
|
||||
dynamic_paint_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
dynamic_paint_test.apply_modifiers = False
|
||||
dynamic_paint_test.do_compare = False
|
||||
name = command[i + 1]
|
||||
dynamic_paint_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
54
tests/python/physics_ocean.py
Normal file
54
tests/python/physics_ocean.py
Normal file
@ -0,0 +1,54 @@
|
||||
# ##### BEGIN GPL LICENSE BLOCK #####
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License
|
||||
# as published by the Free Software Foundation; either version 2
|
||||
# of the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software Foundation,
|
||||
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
||||
#
|
||||
# ##### END GPL LICENSE BLOCK #####
|
||||
|
||||
# <pep8 compliant>
|
||||
|
||||
import os
|
||||
import sys
|
||||
|
||||
import bpy
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import RunTest, ModifierSpec, MeshTest
|
||||
|
||||
|
||||
def main():
|
||||
test = [
|
||||
# World coordinates of test and expected object should be same.
|
||||
MeshTest("PlaneOcean", "testObjPlaneOcean", "expObjPlaneOcean",
|
||||
[ModifierSpec('Ocean', 'OCEAN', {})]),
|
||||
]
|
||||
ocean_test = RunTest(test)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
ocean_test.apply_modifiers = True
|
||||
ocean_test.do_compare = True
|
||||
ocean_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
ocean_test.apply_modifiers = False
|
||||
ocean_test.do_compare = False
|
||||
name = command[i + 1]
|
||||
ocean_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
56
tests/python/physics_particle_instance.py
Normal file
56
tests/python/physics_particle_instance.py
Normal file
@ -0,0 +1,56 @@
|
||||
# ##### BEGIN GPL LICENSE BLOCK #####
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License
|
||||
# as published by the Free Software Foundation; either version 2
|
||||
# of the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software Foundation,
|
||||
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
||||
#
|
||||
# ##### END GPL LICENSE BLOCK #####
|
||||
|
||||
# <pep8 compliant>
|
||||
|
||||
import os
|
||||
import sys
|
||||
|
||||
import bpy
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import RunTest, ModifierSpec, MeshTest
|
||||
|
||||
|
||||
def main():
|
||||
test = [
|
||||
|
||||
MeshTest("ParticleInstanceSimple", "testParticleInstance", "expectedParticleInstance",
|
||||
[ModifierSpec('ParticleInstance', 'PARTICLE_INSTANCE', {'object': bpy.data.objects['Cube']})],
|
||||
threshold=1e-3),
|
||||
|
||||
]
|
||||
particle_instance_test = RunTest(test)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
particle_instance_test.apply_modifiers = True
|
||||
particle_instance_test.do_compare = True
|
||||
particle_instance_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
particle_instance_test.apply_modifiers = False
|
||||
particle_instance_test.do_compare = False
|
||||
name = command[i + 1]
|
||||
particle_instance_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
55
tests/python/physics_particle_system.py
Normal file
55
tests/python/physics_particle_system.py
Normal file
@ -0,0 +1,55 @@
|
||||
# ##### BEGIN GPL LICENSE BLOCK #####
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License
|
||||
# as published by the Free Software Foundation; either version 2
|
||||
# of the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software Foundation,
|
||||
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
||||
#
|
||||
# ##### END GPL LICENSE BLOCK #####
|
||||
|
||||
# <pep8 compliant>
|
||||
|
||||
import os
|
||||
import sys
|
||||
|
||||
import bpy
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import RunTest, ParticleSystemSpec, MeshTest
|
||||
|
||||
|
||||
def main():
|
||||
test = [
|
||||
MeshTest("ParticleSystemTest", "testParticleSystem", "expParticleSystem",
|
||||
[ParticleSystemSpec('Particles', 'PARTICLE_SYSTEM', {'render_type': "OBJECT",
|
||||
'instance_object': bpy.data.objects['Cube']}, 20)], threshold=1e-3),
|
||||
|
||||
]
|
||||
particle_test = RunTest(test)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
particle_test.apply_modifiers = True
|
||||
particle_test.do_compare = True
|
||||
particle_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
particle_test.apply_modifiers = False
|
||||
particle_test.do_compare = False
|
||||
name = command[i + 1]
|
||||
particle_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
@ -24,26 +24,31 @@ import sys
|
||||
import bpy
|
||||
|
||||
sys.path.append(os.path.dirname(os.path.realpath(__file__)))
|
||||
from modules.mesh_test import ModifierTest, PhysicsSpec
|
||||
from modules.mesh_test import RunTest, ModifierSpec, MeshTest
|
||||
|
||||
|
||||
def main():
|
||||
test = [
|
||||
["testSoftBody", "expectedSoftBody",
|
||||
[PhysicsSpec('Softbody', 'SOFT_BODY', {'use_goal': False, 'bend': 8, 'pull': 0.8, 'push': 0.8}, 45)]],
|
||||
|
||||
MeshTest("SoftBodySimple", "testSoftBody", "expectedSoftBody",
|
||||
[ModifierSpec('Softbody', 'SOFT_BODY',
|
||||
{'settings': {'use_goal': False, 'bend': 8, 'pull': 0.8, 'push': 0.8}},
|
||||
45)]),
|
||||
]
|
||||
softBody_test = ModifierTest(test)
|
||||
soft_body_test = RunTest(test)
|
||||
|
||||
command = list(sys.argv)
|
||||
for i, cmd in enumerate(command):
|
||||
if cmd == "--run-all-tests":
|
||||
softBody_test.apply_modifiers = True
|
||||
softBody_test.run_all_tests()
|
||||
soft_body_test.apply_modifiers = True
|
||||
soft_body_test.do_compare = True
|
||||
soft_body_test.run_all_tests()
|
||||
break
|
||||
elif cmd == "--run-test":
|
||||
softBody_test.apply_modifiers = False
|
||||
index = int(command[i + 1])
|
||||
softBody_test.run_test(index)
|
||||
soft_body_test.apply_modifiers = False
|
||||
soft_body_test.do_compare = False
|
||||
name = command[i + 1]
|
||||
soft_body_test.run_test(name)
|
||||
break
|
||||
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user