When the mesh field is left blank and Physics option is enabled, it reinstances the physics mesh from the existing mesh.
like calling gameOb.reinstancePhysicsMesh() from python.
Compound shape control
======================
1) GUI control
It is now possible to control which child shape is added to
a parent compound shape in the Physics buttons. The "Compound"
shape button becomes "Add to parent" on child objects and
determines whether the child shape is to be added to the top
parent compound shape when the game is stated.
Notes: * "Compound" is only available to top parent objects
(objects without parent).
* Nesting of compound shape is not possible: a child
object with "Add to parent" button set will be added
to the top parent compound shape, regardless of its
position in the parent-child hierarchy and even if its
immediate parent doesn't have the "Add to parent" button set.
2) runtime control
It is now possible to control the compound shape at runtime:
The SetParent actuator has a new "Compound" button that indicates
whether the object shape should be added to the compound shape
of the parent object, provided the parent has a compound shape
of course. If not, the object retain it's individual state
while parented.
Similarly, the KX_GameObject.setParent() python function has
a new compound parameter.
Notes: * When an object is dynamically added to a compound
shape, it looses temporarily all its physics capability
to the benefit of the parent: it cannot register collisions
and the characteristics of its shape are lost (ghost, sensor,
dynamic, etc.).
* Nested compound shape is not supported: if the object
being parented is already a compound shape, it is not
added to the compound parent (as if the Compound option
was not set in the actuator or the setParent function).
* To ensure compatibility with old blend files, the Blender
subversion is changed to 2.48.5 and the old blend files
are automatically converted to match the old behavior:
all children of a Compound object will have the "Add to
parent" button set automatically.
Child ghost control
===================
It is now possible to control if an object should becomes ghost
or solid when parented. This is only applicable if the object
is not added to the parent compound shape (see above).
A new "Ghost" button is available on the SetParent actuator to
that effect. Similarly the KX_GameObject.setParent() python function
has a new compound parameter.
Notes: * This option is not applicable to sensor objects: they stay
ghost all the time.
* Make sure the child object does not enter in collision with
the parent shape when the Ghost option if off and the parent is
dynamic: the collision creates a reaction force but the parent
cannot escape the child, so the force builds up and produces
eratic movements.
* The collision capability of an ordinary object (dynamic or static)
is limited when it is parented: it becomes automatically static
and can only detect dynamic and sensor objects.
* A sensor object retain its full collision capability when parented:
it can detect static and dynamic object.
Python control
==============
KX_GameObject.setParent(parent,compound,ghost):
Sets this object's parent.
Control the shape status with the optional compound and ghost parameters:
compound=1: the object shape should be added to the parent compound shape (default)
compound=0: the object should keep its individual shape.
In that case you can control if it should be ghost or not:
ghost=1 if the object should be made ghost while parented (default)
ghost=0 if the object should be solid while parented
Note: if the object type is sensor, it stays ghost regardless of ghost parameter
parent: KX_GameObject reference or string (object name w/o OB prefix)
Servo control motion actuator did not work as expected when the object
is moving on a moving platform.
This patch introduces a new Ref field in the servo motion actuator
to set a reference object for the velocity calculation.
You can set the object during the game using the actuator "reference"
attribute; use an object name or an object reference.
The servo controller takes into account the angular velocity of the
reference object to compute the relative local velocity.
This commit extends the technique of dynamic linked list to the logic
system to eliminate as much as possible temporaries, map lookup or
full scan. The logic engine is now free of memory allocation, which is
an important stability factor.
The overhead of the logic system is reduced by a factor between 3 and 6
depending on the logic setup. This is the speed-up you can expect on
a logic setup using simple bricks. Heavy bricks like python controllers
and ray sensors will still take about the same time to execute so the
speed up will be less important.
The core of the logic engine has been much reworked but the functionality
is still the same except for one thing: the priority system on the
execution of controllers. The exact same remark applies to actuators but
I'll explain for controllers only:
Previously, it was possible, with the "executePriority" attribute to set
a controller to run before any other controllers in the game. Other than
that, the sequential execution of controllers, as defined in Blender was
guaranteed by default.
With the new system, the sequential execution of controllers is still
guaranteed but only within the controllers of one object. the user can
no longer set a controller to run before any other controllers in the
game. The "executePriority" attribute controls the execution of controllers
within one object. The priority is a small number starting from 0 for the
first controller and incrementing for each controller.
If this missing feature is a must, a special method can be implemented
to set a controller to run before all other controllers.
Other improvements:
- Systematic use of reference in parameter passing to avoid unnecessary data copy
- Use pre increment in iterator instead of post increment to avoid temporary allocation
- Use const char* instead of STR_String whenever possible to avoid temporary allocation
- Fix reference counting bugs (memory leak)
- Fix a crash in certain cases of state switching and object deletion
- Minor speed up in property sensor
- Removal of objects during the game is a lot faster
Added occlusion culling capability in the BGE.
More info: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.49/Game_Engine#BGE_Scenegraph_improvement
MSVC, scons, cmake, Makefile updated.
Other minor performance improvements:
- The rasterizer was computing the openGL model matrix of the objects too many times
- DBVT view frustrum culling was not properly culling behind the near plane:
Large objects behind the camera were sent to the GPU
- Remove all references to mesh split/join feature as it is not yet functional
object message actuators needed the prefix OB when sending a message to a specific object.--This line, and those below, will be ignored--
M source/gameengine/Converter/KX_ConvertActuators.cpp
M source/blender/blenkernel/BKE_blender.h
M source/blender/src/buttons_logic.c
M source/blender/blenloader/intern/readfile.c
A new type of constraint actuator is available: Force field.
It provides a very similar service to the Fh material feature
but with some specificities:
- It is defined at the object level: each object can have
different settings and you don't need to use material.
- It can be applied in all 6 directions and not just -Z.
- It can be enabled/disabled easily (it's an actuator).
- You can have multiple force fields active at the same time
on the same object in different direction (think of a
space ship in a tunnel with a repulsive force field
on each wall).
- You can have a different damping for the rotation.
Besides that it provides the same dynamic behavior and the
parameters are self explanatory.
It works by adapting the linear and angular velocity: the
dynamic is independent of the mass. It is compatible with
all other motion actuators.
Note: linear and anysotropic friction is not yet implemented,
the only friction will come from the object damping parameters.
Support for friction will be added in a future revision.
saves a marshal'd GameLogic.globalDict to the blendfile path with the blend extension replaced with bgeconf
Use this in YoFrankie to save keyboard layout and graphics quality settings.
the features that are needed to run the game. Compile tested with
scons, make, but not cmake, that seems to have an issue not related
to these changes. The changes include:
* GLSL support in the viewport and game engine, enable in the game
menu in textured draw mode.
* Synced and merged part of the duplicated blender and gameengine/
gameplayer drawing code.
* Further refactoring of game engine drawing code, especially mesh
storage changed a lot.
* Optimizations in game engine armatures to avoid recomputations.
* A python function to get the framerate estimate in game.
* An option take object color into account in materials.
* An option to restrict shadow casters to a lamp's layers.
* Increase from 10 to 18 texture slots for materials, lamps, word.
An extra texture slot shows up once the last slot is used.
* Memory limit for undo, not enabled by default yet because it
needs the .B.blend to be changed.
* Multiple undo for image painting.
* An offset for dupligroups, so not all objects in a group have to
be at the origin.
without this, an incorrect sound path could cause scripts to to fail, making some functionality not work at all.
This also fixes a problem where samples would be loaded multiple times.
* bugfix for BGE python api - SetParent actuator getObject would segfault if the object was not set.
* Added utility function ConvertPythonToGameObject() that can take a GameObject, string or None and set the game object from this since it was being done in a number of places.
* allow setObject(None), since no object is valid for actuators, Python should be able to set this.
* added optional argument for getObject() so it returns the KX_GameObject rather then its name, would prefer this be default but it could break existing games.
The min/max parameters define a minimum/maximum angle
that the object axis can have with the reference
direction without being constrainted. The angle is
expressed in degree and is limited to 0-180 range.
The min/max parameters define a conical free zone
around the reference direction.
If the object axis is outside that free zone, the
actuator will tend to put it back using as a temporary
reference direction the vector that is exactly at
min or max degree of the reference direction
(depending if the axis angle is below the minimum
or above the maximum) and is located in the plane
formed by the axis and the reference direction.
With a low damping value, this is equivalent to
clamping the axis orientation within min/max degree
of the reference direction.
Backward compatibility corresponds to the absence
of free zone: min = max = 0.
Certain actuators hold a pointer to an objects: Property,
SceneCamera, AddObject, Camera, Parent, TractTo. When a
group is duplicated, the actuators that point to objects
within the group will be relinked to point to the
replicated objects and not to the original objects.
This helps to setup self-contained group with a camera
following a character for example.
This feature also works when adding a single object
(and all its children) with the AddObject actuator.
The second part of the patch extends the protection
against object deletion to all the actuators of the above
list (previously, only the TrackTo, AddObject and
Property actuators were protected). In case the target
object of these actuators is deleted, the BGE won't
crash.
When using states, an action like kick or throw can often switch out before finishing playing the action, and there was no way to play from the start frame the second time round. (even setting the actions current frame through python doesn't work work)
New Add mode for Ipo actuator
=============================
A new Add button, mutually exclusive with Force button, is available in
the Ipo actuator. When selected, it activates the Add mode that consists
in adding the Ipo curve to the current object situation in world
coordinates, or parent coordinates if the object has a parent. Scale Ipo
curves are multiplied instead of added to the object current scale.
If the local flag is selected, the Ipo curve is added (multiplied) in
the object's local coordinates.
Delta Ipo curves are handled identically to normal Ipo curve and there
is no need to work with Delta Ipo curves provided that you make sure
that the Ipo curve starts from origin. Origin means location 0 for
Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for
Scale Ipo curve.
The "current object situation" means the object's location, rotation
and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo
actuators, this means at the start of each loop. This initial state is
used as a base during the execution of the Ipo Curve but when the Ipo
curve is restarted (later or immediately in case of Loop mode), the
object current situation at that time is used as the new base.
For reference, here is the exact operation of the Add mode for each
type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale
and orientation matrix at the start of the curve; iLoc, iRot, iScale,
iMat: Ipo curve loc/rot/scale and orientation matrix resulting from
the rotation).
Location
Local=false: newLoc = oLoc+iLoc
Local=true : newLoc = oLoc+oScale*(oMat*iLoc)
Rotation
Local=false: newMat = iMat*oMat
Local=true : newMat = oMat*iMat
Scale
Local=false: newScale = oScale*iScale
Local=true : newScale = oScale*iScale
Add+Local mode is very useful to have dynamic object executing complex
movement relative to their current location/orientation. Of cource,
dynamics should be disabled during the execution of the curve.
Several corrections in state system
===================================
- Object initial state is taken into account when adding object
dynamically
- Fix bug with link count when adding object dynamically
- Fix false on-off detection for Actuator sensor when actuator is
trigged on negative event.
- Fix Parent actuator false activation on negative event
- Loop Ipo curve not restarting at correct frame when start frame is
different from one.
General
=======
- Removal of Damp option in motion actuator (replaced by
Servo control motion).
- No PyDoc at present, will be added soon.
Generalization of the Lvl option
================================
A sensor with the Lvl option selected will always produce an
event at the start of the game or when entering a state or at
object creation. The event will be positive or negative
depending of the sensor condition. A negative pulse makes
sense when used with a NAND controller: it will be converted
into an actuator activation.
Servo control motion
====================
A new variant of the motion actuator allows to control speed
with force. The control if of type "PID" (Propotional, Integral,
Derivate): the force is automatically adapted to achieve the
target speed. All the parameters of the servo controller are
configurable. The result is a great variety of motion style:
anysotropic friction, flying, sliding, pseudo Dloc...
This actuator should be used in preference to Dloc and LinV
as it produces more fluid movements and avoids the collision
problem with Dloc.
LinV : target speed as (X,Y,Z) vector in local or world
coordinates (mostly useful in local coordinates).
Limit: the force can be limited along each axis (in the same
coordinates of LinV). No limitation means that the force
will grow as large as necessary to achieve the target
speed along that axis. Set a max value to limit the
accelaration along an axis (slow start) and set a min
value (negative) to limit the brake force.
P: Proportional coefficient of servo controller, don't set
directly unless you know what you're doing.
I: Integral coefficient of servo controller. Use low value
(<0.1) for slow reaction (sliding), high values (>0.5)
for hard control. The P coefficient will be automatically
set to 60 times the I coefficient (a reasonable value).
D: Derivate coefficient. Leave to 0 unless you know what
you're doing. High values create instability.
Notes: - This actuator works perfectly in zero friction
environment: the PID controller will simulate friction
by applying force as needed.
- This actuator is compatible with simple Drot motion
actuator but not with LinV and Dloc motion.
- (0,0,0) is a valid target speed.
- All parameters are accessible through Python.
Distance constraint actuator
============================
A new variant of the constraint actuator allows to set the
distance and orientation relative to a surface. The controller
uses a ray to detect the surface (or any object) and adapt the
distance and orientation parallel to the surface.
Damp: Time constant (in nb of frames) of distance and
orientation control.
Dist: Select to enable distance control and set target
distance. The object will be position at the given
distance of surface along the ray direction.
Direction: chose a local axis as the ray direction.
Range: length of ray. Objecgt within this distance will be
detected.
N : Select to enable orientation control. The actuator will
change the orientation and the location of the object
so that it is parallel to the surface at the vertical
of the point of contact of the ray.
M/P : Select to enable material detection. Default is property
detection.
Property/Material: name of property/material that the target of
ray must have to be detected. If not set, property/
material filter is disabled and any collisioning object
within range will be detected.
PER : Select to enable persistent operation. Normally the
actuator disables itself automatically if the ray does
not reach a valid target.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
rotDamp: Time constant (in nb of frame) of orientation control.
0 : use Damp parameter.
>0: use a different time constant for orientation.
Notes: - If neither N nor Dist options are set, the actuator
does not change the position and orientation of the
object; it works as a ray sensor.
- The ray has no "X-ray" capability: if the first object
hit does not have the required property/material, it
returns no hit and the actuator disables itself unless
PER option is enabled.
- This actuator changes the position and orientation but
not the speed of the object. This has an important
implication in a gravity environment: the gravity will
cause the speed to increase although the object seems
to stay still (it is repositioned at each frame).
The gravity must be compensated in one way or another.
the new servo control motion actuator is the simplest
way: set the target speed along the ray axis to 0
and the servo control will automatically compensate
the gravity.
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is
placed BEFORE the Drot motion actuator (the order of
actuator is important)
- All parameters are accessible through Python.
Orientation constraint
======================
A new variant of the constraint actuator allows to align an
object axis along a global direction.
Damp : Time constant (in nb of frames) of orientation control.
X,Y,Z: Global coordinates of reference direction.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
Notes: - (X,Y,Z) = (0,0,0) is not a valid direction
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is placed
BEFORE the Drot motion actuator (the order of
actuator is important).
- This actuator doesn't change the location and speed.
It is compatible with gravity.
- All parameters are accessible through Python.
Actuator sensor
===============
This sensor detects the activation and deactivation of actuators
of the same object. The sensor generates a positive pulse when
the corresponding sensor is activated and a negative pulse when
it is deactivated (the contrary if the Inv option is selected).
This is mostly useful to chain actions and to detect the loss of
contact of the distance motion actuator.
Notes: - Actuators are disabled at the start of the game; if you
want to detect the On-Off transition of an actuator
after it has been activated at least once, unselect the
Lvl and Inv options and use a NAND controller.
- Some actuators deactivates themselves immediately after
being activated. The sensor detects this situation as
an On-Off transition.
- The actuator name can be set through Python.
This patch introduces two options for the motion actuator:
damping: number of frames to reach the target velocity. It takes
into account the startup velocityin the target velocity direction
and add 1/damping fraction of target velocity until the full
velocity is reached. Works only with linear and angular velocity.
It will be extended to delta and force motion method in a future
release.
clamping: apply the force and torque as long as the target velocity
is not reached. If this option is set, the velocity specified
in linV or angV are not applied to the object but used as target
velocity. You should also specify a force in force or torque field:
the force will be applied as long as the velocity along the axis of
the vector set in linV or angV is not reached. Works best in low
friction environment.
This patch introduces a simple state engine system with the logic bricks. This system features full
backward compatibility, multiple active states, multiple state transitions, automatic disabling of
sensor and actuators, full GUI support and selective display of sensors and actuators.
Note: Python API is available but not documented yet. It will be added asap.
State internals
===============
The state system is object based. The current state mask is stored in the object as a 32 bit value;
each bit set in the mask is an active state. The controllers have a state mask too but only one bit
can be set: a controller belongs to a single state. The game engine will only execute controllers
that belong to active states. Sensors and actuators don't have a state mask but are effectively
attached to states via their links to the controllers. Sensors and actuators can be connected to more
than one state. When a controller becomes inactive because of a state change, its links to sensors
and actuators are temporarily broken (until the state becomes active again). If an actuator gets isolated,
i.e all the links to controllers are broken, it is automatically disabled. If a sensor gets isolated,
the game engine will stop calling it to save CPU. It will also reset the sensor internal state so that
it can react as if the game just started when it gets reconnected to an active controller. For example,
an Always sensor in no pulse mode that is connected to a single state (i.e connected to one or more
controllers of a single state) will generate a pulse each time the state becomes active. This feature is
not available on all sensors, see the notes below.
GUI
===
This system system is fully configurable through the GUI: the object state mask is visible under the
object bar in the controller's colum as an array of buttons just like the 3D view layer mask.
Click on a state bit to only display the controllers of that state. You can select more than one state
with SHIFT-click. The All button sets all the bits so that you can see all the controllers of the object.
The Ini button sets the state mask back to the object default state. You can change the default state
of object by first selecting the desired state mask and storing using the menu under the State button.
If you define a default state mask, it will be loaded into the object state make when you load the blend
file or when you run the game under the blenderplayer. However, when you run the game under Blender,
the current selected state mask will be used as the startup state for the object. This allows you to test
specific state during the game design.
The controller display the state they belong to with a new button in the controller header. When you add
a new controller, it is added by default in the lowest enabled state. You can change the controller state
by clicking on the button and selecting another state. If more than one state is enabled in the object
state mask, controllers are grouped by state for more readibility.
The new Sta button in the sensor and actuator column header allows you to display only the sensors and
actuators that are linked to visible controllers.
A new state actuator is available to modify the state during the game. It defines a bit mask and
the operation to apply on the current object state mask:
Cpy: the bit mask is copied to the object state mask.
Add: the bits that set in the bit mask will be turned on in the object state mask.
Sub: the bits that set in the bit mask will be turned off in the object state mask.
Inv: the bits that set in the bit mask will be inverted in the objecyy state mask.
Notes
=====
- Although states have no name, a simply convention consists in using the name of the first controller
of the state as the state name. The GUI will support that convention by displaying as a hint the name
of the first controller of the state when you move the mouse over a state bit of the object state mask
or of the state actuator bit mask.
- Each object has a state mask and each object can have a state engine but if several objects are
part of a logical group, it is recommended to put the state engine only in the main object and to
link the controllers of that object to the sensors and actuators of the different objects.
- When loading an old blend file, the state mask of all objects and controllers are initialized to 1
so that all the controllers belong to this single state. This ensures backward compatibility with
existing game.
- When the state actuator is activated at the same time as other actuators, these actuators are
guaranteed to execute before being eventually disabled due to the state change. This is useful for
example to send a message or update a property at the time of changing the state.
- Sensors that depend on underlying resource won't reset fully when they are isolated. By the time they
are acticated again, they will behave as follow:
* keyboard sensor: keys already pressed won't be detected. The keyboard sensor is only sensitive
to new key press.
* collision sensor: objects already colliding won't be detected. Only new collisions are
detected.
* near and radar sensor: same as collision sensor.
Shape Action are now supported in the BGE. A new type of actuator "Shape Action" is available on mesh objects. It can be combined with Action actuator on parent armature. Only relative keys are supported. All the usual action options are available: type, blending, priority, Python API. Only actions with shape channels should be specified of course, otherwise the actuator has no effect. Shape action will still work after a mesh replacement provided that the new mesh has compatible shape keys.
This bug fix is made of two parts:
1) It's now possible to dynamically add a camera.
2) Empty camera name on a SetCamera actuator now points to the actuator's parent object if this object is a camera.
This trick is useful to make current a dynamically created camera: just add a SetCamera actuator on the camera itself and leave the name empty. Later, when the camera is added in the scene with an AddObject actuator, either directly or via a parent object, you just need to activate the actuator to make the newly created camera current. If you set a name on a SetCamera actuator, it will always point to the original camera, even after replication.
This patch consists in new KX_GameObject::SetParent() and KX_GameObject::RemoveParent() functions to create and destroy parent relation during game. These functions are accessible through python and through a new actuator KX_ParentActuator. Function documentation in PyDoc.
The object keeps its orientation, position and scale when it is parented but will further rotate, move and scale with its parent from that point on. When the parent relation is broken, the object keeps the orientation, position and scale it had at that time.
The function has no effect if any of the X/Y/Z scale of the object or its new parent are below Epsilon.