Code is added to restrict the pixel size of strands in cycles. It works best with ribbon primitives and a preset for these is included. It uses distance dependent expansion of the strands and then stochastic strand removal to give a fading. To prevent a slowdown for triangle mesh objects in the BVH an extra visibility flag has been added. It is also only applied for camera rays.
The strand width settings are also changed, so that the particle size is not included in the width calculation. Instead there is a separate particle system parameter for width scaling.
per render layer samples in addition to the progress bar.
Also fixed job progress bar not working at all on high DPI / retina, was so small
the actual progress was not visible.
* Added new option to chose the tile order.
In addition to the "Center" method, 4 new methods are available now, like Top -> Bottom and Right -> Left.
Thanks to Sergey for code review and some tweaks!
This commit implements highlight of tiles which are being currently
rendered for both Blender Internal and Cycles (and should be possible
to use it for other external engines as well).
Couple of implementation details:
- Added one extra boolean flag to render engine which should be set
to truth if render engine wants to highlight tiles. If so, property
use_highlight_tiles should be set to True.
- Render Part's ready boolena was changed by status enum, which could
be NONE, IN_PROGRESS and READY. All render part with IN_PROGRESS
status will be highlighted in image editor.
- For external engines render part's status is filling in automatically.
Initially all render parts has got NONE status, then one external
engine acquire render result, corresponding part will change status
to IN_PROGRESS. As soon as render result is finished, corresponding
render part will change status to FINISHED
This should make it easy to highlight tiles for other engines as well.
This option enables keeping loaded images in the memory in-between
of rendering.
Implemented by keeping render engine alive for until Render structure
is being freed.
Cycles will free all data when render finishes, optionally keeping
image manager untouched. All shaders, meshes, objects will be
re-allocated next time rendering happens.
Cycles cession and scene will be re-created from scratch if render/
scene parameters were changed.
This will also allow to keep compiled OSL shaders in memory without
need to re-compile them again.
P.S. Performance panel could be cleaned up a bit, not so much happy
with it's vertical alignment currently but not sure how to make
it look better.
P.P.S. Currently the only way to free images from the device is to
disable Persistent Images option and start rendering.
This commit adds memory usage information while rendering.
It reports memory used by device, meaning:
- For CPU it'll report real memory consumption
- For GPU rendering it'll report GPU memory consumption, but it'll
also mean the same memory is used from host side.
This information displays information about memory requested by Cycles,
not memory really allocated on a device. Real memory usage might be
higher because of memory fragmentation or optimistic memory allocator.
There's really nothing we can do against this.
Also in contrast with blender internal's render cycles memory usage
does not include memory used by scene, only memory needed by cycles
itself will be displayed. So don't freak out if memory usage reported
by cycles would be much lower than blender internal's.
This commit also adds RenderEngine.update_memory_stats callback which
is used to tell memory consumption from external engine to blender.
This information is used to generate information line after rendering
is finished.
This time issue was caused by Save Buffers enabled and the reason blender
crashed was tiles generated by cycles didn't match tiles generated by
openexr.
Currently solved it in a way that background rendering will allocate tiles
in the same way render parts are generated in blender. Viewport rendering
will still be using sliced image, but it's more tricky to change and it's
no so big deal for now.
Issue was caused by offline rendering could have been allocated the same tile
to different devices and in this case buffers would become invalid.
Made it more clear in the code, so now it's flag for tile manager to indicate
whether tiles should always be allocated for the same device or not.
Also cleaned a way how tile index for progressive refine is calculating,
which is now avoids tricky computation based on tile coordinate and it's
dimensions.
Just makes progressive refine :)
This means the whole image would be refined gradually using as much
threads as it's set in performance settings. Having enough tiles is
required to have this option working as it's expected.
Technically it's implemented by repeatedly computing next sample for
all the tiles before switching to next sample.
This works around 7-12% slower than regular tile-based rendering, so
use this option only if you really need it.
This commit also fixes progressive update of image when Save Buffers
option is enabled.
And one more thing this commit fixes is handling display buffer with
Save Buffers option enabled. If this option is enabled image buffer
wouldn't have neither byte nor float buffer until image is fully
rendered which could backfire in missing image while rendering in
cases color management cache became full.
This issue solved by allocating byte buffer for image buffer from
tile update callback.
Patch was reviewed by Brecht. He also made some minor edits to
original version to patch. Thanks, man!
resolutions to render, to a "start resolution" which gives the resolution
to start at.
This avoids unnecessary rendering of small resolutions in small viewports,
and avoids long waiting on big viewports.
When the scene is updated Cycles resets the renderer device, cancelling
all existing tasks. The main thread would wait for all running tasks to
finish before continuing. This is ok when tasks can actually cancel in a
timely fashion. For OSL however, this does not work, since the OSL
shader group optimization takes quite a bit of time and can not be
easily be cancelled once running (on my crappy machine in full debug
mode: ~0.12 seconds for simple node trees). This would lead to very
laggy UI behavior and make it difficult to accurately control elements
such as sliders.
This patch removes the wait condition from the device->task_cancel
method. Instead it just sets the do_cancel flag and returns. To avoid
backlog in the task pool of the device it will return early from the
BlenderSession::sync function while the reset is going on (tested in
Session::resetting). Once all existing tasks have finished the do_cancel
flag is finally cleared again (checked in TaskPool::num_decrease).
Care has to be taken to avoid race conditions on the do_cancel flag,
since it can now be modified outside the TaskPool::cancel function
itself. For this purpose the scope of the TaskPool::num_mutex locks has
been extended, in most cases the mutex is now locked by the TaskPool
itself before calling TaskScheduler methods, instead of only locking
inside the num_increase/num_decrease functions themselves. The only
occurrence of a lock outside of the TaskPool methods is in
TaskScheduler::thread_run.
This patch is most useful in combination with the OSL renderer mode, so
it can probably wait until after the 2.64 release. SVM tasks tend to be
cancelled quickly, so the effect is less noticeable.
Regular rendering now works tiled, and supports save buffers to save memory
during render and cache render results.
Brick texture node by Thomas.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Brick_Texture
Image texture Blended Box Mapping.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Image_Texturehttp://mango.blender.org/production/blended_box/
Various bug fixes by Sergey and Campbell.
* Fix for reading freed memory in some node setups.
* Fix incorrect memory read when synchronizing mesh motion.
* Fix crash appearing when direct light usage is different on different layers.
* Fix for vector pass gives wrong result in some circumstances.
* Fix for wrong resolution used for rendering Render Layer node.
* Option to cancel rendering when doing initial synchronization.
* No more texture limit when using CPU render.
* Many fixes for new tiled rendering.
=== BVH build time optimizations ===
* BVH building was multithreaded. Not all building is multithreaded, packing
and the initial bounding/splitting is still single threaded, but recursive
splitting is, which was the main bottleneck.
* Object splitting now uses binning rather than sorting of all elements, using
code from the Embree raytracer from Intel.
http://software.intel.com/en-us/articles/embree-photo-realistic-ray-tracing-kernels/
* Other small changes to avoid allocations, pack memory more tightly, avoid
some unnecessary operations, ...
These optimizations do not work yet when Spatial Splits are enabled, for that
more work is needed. There's also other optimizations still needed, in
particular for the case of many low poly objects, the packing step and node
memory allocation.
BVH raytracing time should remain about the same, but BVH build time should be
significantly reduced, test here show speedup of about 5x to 10x on a dual core
and 5x to 25x on an 8-core machine, depending on the scene.
=== Threads ===
Centralized task scheduler for multithreading, which is basically the
CPU device threading code wrapped into something reusable.
Basic idea is that there is a single TaskScheduler that keeps a pool of threads,
one for each core. Other places in the code can then create a TaskPool that they
can drop Tasks in to be executed by the scheduler, and wait for them to complete
or cancel them early.
=== Normal ====
Added a Normal output to the texture coordinate node. This currently
gives the object space normal, which is the same under object animation.
In the future this might become a "generated" normal so it's also stable for
deforming objects, but for now it's already useful for non-deforming objects.
=== Render Layers ===
Per render layer Samples control, leaving it to 0 will use the common scene
setting.
Environment pass will now render environment even if film is set to transparent.
Exclude Layers" added. Scene layers (all object that influence the render,
directly or indirectly) are shared between all render layers. However sometimes
it's useful to leave out some object influence for a particular render layer.
That's what this option allows you to do.
=== Filter Glossy ===
When using a value higher than 0.0, this will blur glossy reflections after
blurry bounces, to reduce noise at the cost of accuracy. 1.0 is a good
starting value to tweak.
Some light paths have a low probability of being found while contributing much
light to the pixel. As a result these light paths will be found in some pixels
and not in others, causing fireflies. An example of such a difficult path might
be a small light that is causing a small specular highlight on a sharp glossy
material, which we are seeing through a rough glossy material. With path tracing
it is difficult to find the specular highlight, but if we increase the roughness
on the material the highlight gets bigger and softer, and so easier to find.
Often this blurring will be hardly noticeable, because we are seeing it through
a blurry material anyway, but there are also cases where this will lead to a
loss of detail in lighting.
lower than 1.3, since we're not officially supporting these. We're already not
providing CUDA binaries for these, so better make it clear when compiling from
source too.
* Passes renamed to samples
* Camera lens radius renamed to aperature size/blades/rotation
* Glass and fresnel nodes input is now index of refraction
* Glossy and velvet fresnel socket removed
* Mix/add closure node renamed to mix/add shader node
* Blend weight node added for shader mixing weights
There is some version patching code for reading existing files, but it's not
perfect, so shaders may work a bit different.
* Fix missing update when editing objects with emission materials.
* Fix preview pass rendering set to 1 not showing full resolution.
* Fix CUDA runtime compiling failing due to missing cache directory.
* Use settings from first render layer for visibility and material override.
And a bunch of incomplete and still disabled code mostly related to closure
sampling.
* OpenCL now only uses GPU/Accelerator devices, it's only confusing if CPU
device is used, easy to enable in the code for debugging.
* OpenCL kernel binaries are now cached for faster startup after the first
time compiling.
* CUDA kernels can now be compiled and cached at runtime if the CUDA toolkit
is installed. This means that even if the build does not have CUDA enabled,
it's still possible to use it as long as you install the toolkit.
* Compute MD5 hash to deal with nvidia opencl compiler cache not recognizing
changes in #included files, makes it possible to do kernel compile only
once and remember it for the next time blender is started.
* Kernel tweak to compile with ATI/linux. Enabling any more functionality than
simple clay render still chokes the compiler though, without a specific error
message ..
* Add alpha pass output, to use set Transparent option in Film panel.
* Add Holdout closure (OSL terminology), this is like the Sky option in the
internal renderer, objects with this closure show the background / zero
alpha.
* Add option to use Gaussian instead of Box pixel filter in the UI.
* Remove camera response curves for now, they don't really belong here in
the pipeline, should be moved to compositor.
* Output full float values for rendering now, previously was only byte precision.
* Add a patch from Thomas to get a preview passes option, but still disabled
because it isn't quite working right yet.
* CUDA: don't compile shader graph evaluation inline.
* Convert tabs to spaces in python files.
* auto/fixed threads option is used now, patch by Thomas.
* remove unused CUDA_LIBRARIES, library is dynamically loaded
* fix mesh XML export operator for API update