* update env template to fit the config.rs
* Categorize env template settings
* Fix a wrong setting
* Fix wrong icon redirect code
* Fix ICON_DOWNLOAD_TIMEOUT default value
Co-authored-by: Daniel <daniel.barabasa@gmail.com>
* Move related settings together.
Merge Yubikey, Duo, Email 2FA sections into one.
Other minor fixes.
* Minor fix of some settings position
* Add some comment
* Minor fix.
---------
Co-authored-by: Daniel <daniel.barabasa@gmail.com>
* enforce 2fa policy on removal of second factor
users should be revoked when their second factors are removed.
we want to revoke users so they don't have to be invited again and
organization admins and owners are aware that they no longer have
access.
we make an exception for non-confirmed users to speed up the invitation
process as they would have to be restored before they can accept their
invitation or be confirmed.
if email is enabled, invited users have to add a second factor before
they can accept the invitation to an organization with 2fa policy.
and if it is not enabled that check is done when confirming the user.
* use &str instead of String in log_event()
* enforce the 2fa policy on login
if a user doesn't have a second factor check if they are in an
organization that has the 2fa policy enabled to revoke their access
* Allow customizing the featureStates
Use a comma separated list of features to enable using the FEATURE_FLAGS env variable
* Move feature flag parsing to util
* Fix formatting
* Update supported feature flags
* Rename feature_flags to experimental_client_feature_flags
Additionally, use a caret (^) instead of an exclamation mark (!) to disable features
* Fix formatting issue.
* Add documentation to env template
* Remove functionality to disable feature flags
* Fix JSON key for feature states
* Convert error to warning when feature flag is unrecognized
* Simplify parsing of feature flags
* Fix default value of feature flags in env template
* Fix formatting
There was an error in the single org policy check to determine how many
users there are in an org. The `or` check was at the wrong location in
the DSL.
This is now fixed.
Fixes#4205
OpenWRT is a project which builds and distributes firmware for
embedded devies like routers, access points, and so on. These
devices are usually very limited in terms of storage. Therefore,
optimizing binaries for size at the cost of execution speed is
usually desired.
This PR adds an additional build-target, namely "release-micro",
which implements several parameters which optimize in favor of
binary size.
The following parameters were chosen:
- opt-level "z": Optimize for size with disabled loop vectorization
- strip "symbols": Strip debuginfo and symbols from binary
- lto "fat": Enable link-time optimizations across all crates
- codegen-units 1: Disable parallelization of code generation to
allow for additional optimizations
- panic "abort": Abort on Panic() instead of unwinding
All these build parameters significantly reduce the binary size
from >40MB to <15MB - the actual amount depends on the target
architecture.
We would like to upstream this new build target to keep our build
environment simple. Other projects which deploy vaultwarden on
size-constrained environments may benefit from this change too.
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Large JWT's could cause issue because of header or body sizes of the
HTTP request could get too large when you are a member of a lot of organizations.
This PR removes these specific keys since they are not used either
client side or server side.
Because Bitwarden does add these in there JWT's i would suggest to keep
the code we had but then commented out as a reference.
Removing it and searching for this when needed would be a waist of time.
Fixes#4156
For some reason still not known, the `.git` directory was not copied
into the container. I think buildkit (buildx) did this by default before, and
stopped this with newer versions.
This PR fixes this by also touching `build.rs` besides `src/main.rs`.
This PR also updates Rust to v1.74.1 and some crates, including the
latest version of Alpine 3.19.
Fixes#4150
* Fix BWDC when re-run with cleared cache
Using the BWDC with a cleared cache caused invited users to be converted
to accepted users.
The problem was a wrong check for the `restore` function.
Fixes#4114
* Remove useless variable
During some refactoring this seems to be overlooked.
This variable gets filled but isn't used at all afterwards.
Fixes#4105
* Check some `.git` paths to force a rebuild
When a checked-out repo switches to a specific tag, and that tag does
not have anything else changed in the files except the tag, it could
happen that the build process doesn't see any changes, while it could be
that the version string needs to be different.
This commit ensures that if some specific paths are changed within the
.git directory, cargo will be triggered to rebuild.
Fixes#4087
* Do not delete dir on file delete
Previously during a `delete_file` check we also tried to delete the
parent directory and ignored all errors, like not being empty for
example.
Since this function is called `delete_file` and does not mention
anything in regards to a directory i have removed that code and it will
now only delete the file and leave the rest as-is.
If this somehow is still needed or wanted, which i do not think we want,
then we should create a new function.
Fixes#4081
* Fix healthcheck when using an ENV file
If someone is using a `.env` file or configured the `ENV_FILE` variable
to use that as it's configuration, this was missed by the healthcheck.
So, `DOMAIN` and `ROCKET_TLS` were not seen, and not used in these cases.
This commit fixes this by checking for this file and if it exists, then
it will load those variables first.
Fixes#4112
* Add missing route
While there was a function and a derive, this endpoint wasn't part of
the routes. Since Bitwarden does have this endpoint ill add the route
instead of deleting it.
Fixes#4076Fixes#4144
* Update crates to update the openssl crate
Because of a bug in the openssl-sys crate we pinned the version to an
older version. This issue has been fixed and was released 2 days ago.
This commit updates the openssl crates including others.
This should also fix the issues with building Vaultwarden using newer
versions of LibreSSL.
Fixes#4051
- Updated Rust to v1.74.0
- Updated all crates (where possible)
- Changed release profile to use
* fat lto
* 1 codegen-unit
This should optimize a bit for speed and a lot for size ~15MB smaller
- Updated Github actions to use caching for the bake process
- Added a schedule to clean the cache every week to prevent stale Debian/Alpine base images
- During the release action, the Alpine/static binaries are added as artifects.
Later we could also automatically add them to the releases maybe.
- Added CODEWONERS to prevent unchecked changes to github actions workflows
When a WebSocket connection was closing it was sending a message after
it was closed already. This generated an error in the logs.
While this error didn't harm any of the functionallity of Vaultwarden it
isn't nice to see them of course.
This PR Fixes this by catching the close message and breaks the loop at
that point. This prevents the `_` catch-all from replying the close
message back to the client, which was causing the error message.
Fixes#4090
* Remove another header for websocket connections
* Fix small bake issue
* Update crates
Updated crates and adjusted code where needed.
One major update is Rocket rc4, no need anymore (again) for crates.io patching.
The only item still pending is openssl/openssl-sys for which we need to
wait if https://github.com/sfackler/rust-openssl/pull/2094 will be
merged. If, then we can remove the pinned versions for the openssl crate.
Since the feature `Login with device` some actions done via the
web-vault need to be verified via an OTP instead of providing the MasterPassword.
This only happens if a user used the `Login with device` on a device
which uses either Biometrics login or PIN. These actions prevent the
athorizing device to send the MasterPasswordHash. When this happens, the
web-vault requests an OTP to be filled-in and this OTP is send to the
users email address which is the same as the email address to login.
The only way to bypass this is by logging in with the your password, in
those cases a password is requested instead of an OTP.
In case SMTP is not enabled, it will show an error message telling to
user to login using there password.
Fixes#4042
The bake recipt was missing the single `:alpine` tag for the alpine
builds when we were releasing a `stable/latest` version of Vaultwarden.
This PR fixes this by checking for those conditions and add the
`:alpine` tag too.
We will keep the `:latest-alpine` also, which i find even nicer then just
`:alpine`
Fixes#4035
When importing Bitwarden JSON exports, these would fail because the last
modification date was also imported and caused our out-off-sync check to
kick-in. This PR fixes this by checking if we are doing an import, and
skip this check.
Fixes#4005
MariaDB/MySQL doesn't like the normal `"` quotes around the column name.
This needs to be a backtick **`**.
This PR changes the migration script to fix this issue.
Fixes#3993
* WIP: Container building changes
* Small updates
- Updated to rust 1.73.0
- Updated crates
- Updated documentation
- Added a bake.sh script to make baking easier
* Update GitHub Actions Workflow
- Updated workflow to use qemu and buildx bake
In the future i would like to extract the alpine based binaries and add
them as artifacts to the release.
* Address review remarks and small updates
- Addressed review remarks
- Added `podman-bake.sh` script to build Vaultwarden with podman
- Updated README
- Updated crates
- Added `VW_VERSION` support
- Added annotations
- Updated web-vault to v2023.9.1
* Update twofactor_email.hbs subject line to avoid triggering gmail content filter
Previous subject line was triggering Google's spam blocker, breaking the 2FA setup process if a gmail SMTP server is configured. The new subject line does not (currently) run afoul of Google's filter.
* Update twofactor_email.html.hbs subject line to avoid triggering gmail content filter
Previous subject line was triggering Google's spam blocker, breaking the 2FA setup process if a gmail SMTP server is configured. The new subject line does not (currently) run afoul of Google's filter.
* Update twofactor_email.hbs
Changed "Confirmation" to "Verification" for the sake of internal consistency
* Update twofactor_email.hbs
* Update twofactor_email.html.hbs
While working on the fix I realised the location where the `external_id`
is stored was wrong. It was stored in the `users` table, but it actually
should have been stored in the `users_organizations` table.
This will move the column to the right table. It will not move the
values of the `external_id` column, because if there are more
organizations, there is no way to really know which organization it is
linked to. Setups using the Directory Connector can clear the sync
cache, and sync again, that will store all the `external_id` values at
the right location.
Also changed the function to revoke,restore an org-user and set_external_id to return a boolean.
It will state if the value has been changed or not, and if not, we can
prevent a `save` call to the database.
The `users` table is not changed to remove the `external_id` column, thi
to prevent issue when users want to revert back to an earlier version
for some reason. We can do this after a few minor release i think.
Fixes#3777
The PostgreSQL migrations do not need this setting.
I tested this by running an old Vaultwarden instance (v1.18.0) on a new
PostrgreSQL database, created a few users and some vault items, after
that run the new code and it doesn't break.
Fixes#3930
During a WebSocket connection we currently also send several headers
which could cause issues with some reverse proxy, or with the CloudFlare
tunnel for example. This PR resolves these issues.
Fixes#3881
It looks like either something changed in the latest v2023.8.x versions,
or when using Biometrics to login, but the MasterPasswordHash is an
optional value during the Approve action.
This PR makes the MasterPasswordHash an optional value which resolves
this issues. Bitwarden works the same way.
I also changed the EncKey to an Option in the database since empty
strings as a default value is not nice in databases, better to use
`null` in these cases.
Fixes#3819
- Updated the admin interface dependencies.
- Replace bootstrap-native with bootstrap
- Added auto theme with an option to switch to dark/light
- Some small color changes
- Added an dev only function to always load static files from disk
Some clients (Thirdparty) might use the `Authorization` header instead
of a query param. We didn't supported this since all the official
clients do not seem to use this way of working. But Bitwarden does check
both ways.
This PR adds an extra check for this header which can be optional.
Fixes#3776
needed for web-v2023.8.2+ compatibility due to the inclusion of the new
trusted device encryption feature. without this change, the web vault
will assume that you don't have a master password set and force you to
set one.
in web-v2023.8.x the getPlans() call was changed from `/plans/` to `/plans/all`
and the create new organization form also requires a bitwardenProduct to
differentiate between plans for PasswordManager and the SecretsManager
Some optimizations in regards to downloading Favicon's.
I also encounterd some issues with accessing some sites where the
connection got dropped or closed early. This seems a reqwest/hyper
thingy, https://github.com/hyperium/hyper/issues/2136. This is now also
fixed.
General:
- Decreased struct size
- Decreased memory allocations
- Optimized tokenizer a bit more to only emit tags when all attributes are there and are valid.
reqwest/hyper connection issue:
The following changes helped solve the connection issues to some sites.
The endresult is that some icons are now able to be downloaded always instead of sometimes.
- Enabled some extra reqwest features, `deflate` and `native-tls-alpn`
(Which do not bring in any extra crates since other crates already enabled them, but they were not active for Vaultwarden it self)
- Configured reqwest to have a max amount of idle pool connections per host
- Configured reqwest to timeout the idle connections in 10 seconds
This PR updates the base images to use Debian Bookworm as base image. Also the MUSL/Alpine builds now use OpenSSLv3 and PostgreSQL v15.
The GHA Workflows are updated to use Ubuntu 22.04 to better match the versions of Debian Bookworm.
Also:
- Enabled spares crate registry
- Updated workflow actions
- Updated Rust to v1.71.0
- The rust-musl images now use musl v1.2.3 for the 32bit arch's if the Rust version is v1.71.0 or higher.
The 64bit arch's already used musl v1.2.3.
- Updated crates.
Improves / Closes#3434
When a user does not have an account yet and SMTP was disabled it would
set the UserOrg status still to Accepted, though that would make it
possible to verify the user by the Org Admin's.
This would fail, since the user didn't actually crated his account, and
therefor no PublicKey existed.
This PR fixes this behaviour by checking if the password is empty and if
so, puts the user to an `Invited` state instead of `Accepted`.
Fixes#3737
- Do not update `externalId` on group updates
Groups are only updated via the web-vault currently, and those do not
send the `externalId` value, and thus we need to prevent updating it.
- Refactored some other ExternalId functions
- Prevent empty `externalId` on `Collections`
- Return `externalId` for users
Fixes#3685
When a specific commit is checked out from the main branch, the vaultwarden
version is reported as `vaultwarden x.y.z-githash (HEAD)`.
This is a problem, because the admin interface reports this as a version from
a branch called HEAD, while in reality the commit was from the main branch.
In a previous commit push notifications for mobile were added, but this
introduced a header guard which caused issues with anonymous endpoints.
This PR fixes this by using a uuid with only 0's.
Fixes#3607
Merging a PR from @Kurnihil into the already rebased branch.
Made some small changes to make it work with newer changes.
Some finetuning is probably still needed.
Co-authored-by: Daniele Andrei <daniele.andrei@geo-satis.com>
Co-authored-by: Kurnihil
This is a WIP for adding organization token login support.
It has basic token login and verification support, but that's about it.
This branch is a refresh of the previous version, and will contain code
from a PR based upon my previous branch.
When you are not loggedin, and have no cookie etc.. we always returned a 401.
This was mainly to allow the login page on all the sub pages, and after
login being redirected to the requested page, for these pages a 401 is a
valid response, since, you do not have access.
But for the main `/admin` page, it should just respond with a `200` and
show the login page.
This PR fixes this flow and response. It should prevent people using
Fail2ban, or other tools being triggered by only accessing the login page.
Resolves#3540
There now is a `v0.5` branch which will be the final release version
when the time is there. Switched to this instead of the `master` branch
which contains other fixes and enhancements as well (for `v0.6`).
This should solve all the endpoint issue we were having.
During setting the latest commit hash for Rocket and updating all the
other crates, there were some messages regarding the usage of `String`
for the Rocket endpoint function calls. I acted upon this message and
changed all `String` types to `&str` and modified the code where needed.
This ended up in less alloc calls, and probably also a bit less memory usage.
- Updated all the crates and commit hashes
- Modified all `String` to `&str` where applicable
- Fixed issue with domains starting with `admin`
- Fixed issue with DUO not being enabled globally anymore (regression)
- Renamed `Ciphers` to `Entries` in overview
- Improved `ADMIN_TOKEN` description
- Updated jquery-slim and datatables
Resolves#3382Resolves#3415
Resolves discussion on #3288
This PR implements a (not yet fully released) new feature of Rocket which allows WebSockets/Upgrade connections.
No more need for multiple ports to be opened for Vaultwarden.
No explicit need for a reverse proxy to get WebSockets to work (Although I still suggest to use a reverse proxy).
- Using a git revision for Rocket, since `rocket_ws` is not yet released.
- Updated other crates as well.
- Added a connection guard to clear the WS connection from the Users list.
Fixes#685Fixes#2917Fixes#1424
For some reason I encountered a strange bug which resulted in sending
out multiple websocket notifications for the exact same user.
Added a `distinct()` for the query to filter out multiple uuid's.
- Revert #3170 as discussed in #3387
In hindsight it's better to not have this feature
- Update Dockerfile.j2 for easy version changes.
Just change it in one place instead of multiple
- Updated to Rust to latest patched version
- Updated crates to latest available
- Pinned mimalloc to an older version, as it breaks on musl builds
the client will ignore the value of theses fields in case of `PBKDF2`
(whether they are unset or left from trying out `Argon2id` as KDF).
with `Argon2id` those fields should never be `null` but always in a
valid state. if they are `null` (how would that even happen?) the
client still assumes default values for `Argon2id` (i.e. m=64 and p=4)
and if they are set to something else login will fail anyway.
There was used a wrong macro to produce an error message when mailing
the user his password was reset failed. It was using `error!()` which
does not return an `Err` and aborts the rest of the code.
This resulted in the users password still being resetted, but not being
notified. This PR fixes this by using `err!()`. Also, do not set the
user object as mutable until it really is needed.
Second, when a user was using the new Argon2id KDF with custom values
like memory and parallelism, that would have rendered the password
incorrect. The endpoint which should return all the data did not
returned all the new Argon2id values.
Fixes#3388
Co-authored-by: Stefan Melmuk <509385+stefan0xC@users.noreply.github.com>
- Updated workflows to use new checkout version
This probably fixes the curl download for hadolint also.
- Updated crates including Rocket to the latest rc3 :party:
- Applied 2 nightly clippy lints to prevent future clippy issues.
- Added support for Quay.io
- Added support for GHCR.io
To enable support for these container image registries the following needs to be added.
As `Actions secrets and variables` - `Secrets`
- `DOCKERHUB_TOKEN` and `DOCKERHUB_USERNAME`
- `QUAY_TOKEN` and `QUAY_USERNAME`
As `Actions secrets and variables` - `Variables` - `Repository Variables`
- `DOCKERHUB_REPO`
- `GHCR_REPO`
- `QUAY_REPO`
The `DOCKERHUB_REPO` currently configured in `Secrets` can be removed if wanted, probably best after this PR has been merged.
If one of the vars/secrets are not configured it will skip that specific registry!
Since we now use the `ClientIp` Guard on a lot more places, it also
increases the size of binary, and the macro generated code because of
this extra Guard. By merging the `ClientIp` Guard with the several
`Header` guards we have it reduces the amount of code generated
(including LLVM IR), but also a small speedup in build time.
I also spotted some small `json!()` optimizations which also reduced the
amount of code generated.
- Changed MSRV to v1.65.
Discussed this with @dani-garcia, and we will support **N-2**.
This is/will be the same as for the `time` crate we use.
Also updated the wiki regarding this https://github.com/dani-garcia/vaultwarden/wiki/Building-binary
- Removed backtrace crate in favor of `std::backtrace` stable since v1.65
- Updated Rust to v1.67.1
- Updated all the crates
- Updated the GHA action versions
- Adjusted the GHA MSRV build to extract the MSRV from `Cargo.toml`
There was a small bug left in regards to the web-vault v2023.2.0 fixes.
This PR fixes the left items. I think all should be addressed now.
When editing a User, you were not able to see or edit groups, or see
wich collections a user bellonged to.
Fixes#3311
Rocket automatically implements a HEAD route when there's a matching GET
route, but relying on this behavior also means a spurious error gets
logged due to <https://github.com/SergioBenitez/Rocket/issues/1098>.
Add explicit HEAD routes for `/` and `/alive` to prevent uptime monitoring
services from generating error messages like `No matching routes for HEAD /`.
With these new routes, `HEAD /` only checks that the server can respond over
the network, while `HEAD /alive` also checks that the database connection is
alive, similar to `GET /alive`.
Added support for Argon2 hashing support for the `ADMIN_TOKEN` instead
of only supporting a plain text string.
The hash must be a PHC string which can be generated via the `argon2`
CLI **or** via the also built-in hash command in Vaultwarden.
You can simply run `vaultwarden hash` to generate a hash based upon a
password the user provides them self.
Added a warning during startup and within the admin settings panel is
the `ADMIN_TOKEN` is not an Argon2 hash.
Within the admin environment a user can ignore that warning and it will
not be shown for at least 30 days. After that the warning will appear
again unless the `ADMIN_TOKEN` has be converted to an Argon2 hash.
I have also tested this on my RaspberryPi 2b and there the `Bitwarden`
preset takes almost 4.5 seconds to generate/verify the Argon2 hash.
Using the `OWASP` preset it is below 1 second, which I think should be
fine for low-graded hardware. If it is needed people could use lower
memory settings, but in those cases I even doubt Vaultwarden it self
would run. They can always use the `argon2` CLI and generate a faster hash.
- Updated datatables
- Added NTP Time check
- Added Collections, Groups and Events count for orgs
- Renamed `Items` to `Ciphers`
- Some small style updates
- Supports the new Collection/Group/User editing UI's
- Support `/partial` endpoint for cipher updating to allow folder and favorite update for read-only ciphers.
- Prevent `Favorite`, `Folder`, `read-only` and `hide-passwords` from being added to the organizational sync.
- Added and corrected some `Object` key's to the output json.
Fixes#3279
In the org vault view, the Bitwarden web vault currently tries to fetch the
groups for an org regardless of whether it claims to have group support.
If this errors out, no vault items are displayed.
I messed up with identation sorry it's my first PR
Fix Collection Read Only access for groups
Fix Collection Read Only access for groups
With indentation modification
With existing groups configured within an org, deleting that org would
fail because of Foreign Key issues.
This PR fixes this by making sure the groups get deleted before the org does.
Fixes#3247
During the client API login we need to have a `device_identifier`, `device_name` and `device_type`.
When these were not provided Vaultwarden would panic.
This PR add checks for these fields and makes sure it returns a better error message instead of causing a panic.
I messed up with identation sorry it's my first PR
Fix Collection Read Only access for groups
Fix Collection Read Only access for groups
With indentation modification
With existing groups configured within an org, deleting that org would
fail because of Foreign Key issues.
This PR fixes this by making sure the groups get deleted before the org does.
Fixes#3247
During the client API login we need to have a `device_identifier`, `device_name` and `device_type`.
When these were not provided Vaultwarden would panic.
This PR add checks for these fields and makes sure it returns a better error message instead of causing a panic.
With existing groups configured within an org, deleting that org would
fail because of Foreign Key issues.
This PR fixes this by making sure the groups get deleted before the org does.
Fixes#3247
During the client API login we need to have a `device_identifier`, `device_name` and `device_type`.
When these were not provided Vaultwarden would panic.
This PR add checks for these fields and makes sure it returns a better error message instead of causing a panic.
During the client API login we need to have a `device_identifier`, `device_name` and `device_type`.
When these were not provided Vaultwarden would panic.
This PR add checks for these fields and makes sure it returns a better error message instead of causing a panic.
During the client API login we need to have a `device_identifier`, `device_name` and `device_type`.
When these were not provided Vaultwarden would panic.
This PR add checks for these fields and makes sure it returns a better error message instead of causing a panic.
I messed up with identation sorry it's my first PR
Fix Collection Read Only access for groups
Fix Collection Read Only access for groups
With indentation modification
With existing groups configured within an org, deleting that org would
fail because of Foreign Key issues.
This PR fixes this by making sure the groups get deleted before the org does.
Fixes#3247
When an icon will not be downloaded due to matching a configured
blacklist, ensure that the log message indicates the type of blacklist
that was matched.
the client does not send the key on every update of an emergency access
contact so the field would be emptied on a change of the wait days or access level.
This is done by running `setcap cap_net_bind_service=+ep` on the executable
in the build stage (doing it in the runtime stage creates an extra copy of
the executable that bloats the image). This only works when using the
BuildKit-based builder, since the `COPY` instruction doesn't copy
capabilities on the legacy builder.
When a non sqlite database is used, loading the admin interface fails
because the backup button is not generated.
This PR is solves it by checking if the elements are valid.
Also made some other changes and fixed some eslint errors.
Showing `_post` errors is better now.
Update jquery to latest version.
Fixes#3166
This section of code seems to be breaking the Docker release workflow as of a
few days ago, though it's unclear why. This tag only existed to work around
an issue with Docker pulling the wrong image for ARMv6 platforms; that issue
was resolved in Docker 20.10.0, which has been out for a few years now, so it
seems like a reasonable time to drop this tag.
We also need to validate the note sizes on key-rotation.
If we do not validate them before we store them, that could lead to a
partial or total loss of the password vault. Validating these
restrictions before actually processing them to store/replace the
existing ciphers should prevent this.
There was also a small bug when using web-sockets. The client which is
triggering the password/key-rotation change should not be forced to
logout via a web-socket request. That is something the client will
handle it self. Refactored the logout notification to either send the
device uuid or not on specific actions.
Fixes#3152
- Change default Password Hash KDF Storage from 100_000 to 600_000 iterations
- Update Password Hash when the default iteration value is different
- Validate password_iterations
- Validate client-side KDF to prevent it from being set lower than 100_000
We also need to validate the note sizes on key-rotation.
If we do not validate them before we store them, that could lead to a
partial or total loss of the password vault. Validating these
restrictions before actually processing them to store/replace the
existing ciphers should prevent this.
There was also a small bug when using web-sockets. The client which is
triggering the password/key-rotation change should not be forced to
logout via a web-socket request. That is something the client will
handle it self. Refactored the logout notification to either send the
device uuid or not on specific actions.
Fixes#3152
The Organization member overview supports showing an icon if the user
has MFA enabled or not. This PR adds this feature.
This is very useful if you want to enable force mfa for example.
The Organization member overview supports showing an icon if the user
has MFA enabled or not. This PR adds this feature.
This is very useful if you want to enable force mfa for example.
The Organization member overview supports showing an icon if the user
has MFA enabled or not. This PR adds this feature.
This is very useful if you want to enable force mfa for example.
The Organization member overview supports showing an icon if the user
has MFA enabled or not. This PR adds this feature.
This is very useful if you want to enable force mfa for example.
As mentioned in #3111, using a very very large vault causes some issues.
Mainly because of a SQLite limit, but, it could also cause issue on
MariaDB/MySQL or PostgreSQL. It also uses a lot of memory, and memory
allocations.
This PR solves this by removing the need of all the cipher_uuid's just
to gather the correct attachments.
It will use the user_uuid and org_uuid's to get all attachments linked
to both, weither the user has access to them or not. This isn't an
issue, since the matching is done per cipher and the attachment data is
only returned if there is a matching cipher to where the user has access to.
I also modified some code to be able to use `::with_capacity(n)` where
possible. This prevents re-allocations if the `Vec` increases size,
which will happen a lot if there are a lot of ciphers.
According to my tests measuring the time it takes to sync, it seems to
have lowered the duration a bit more.
Fixes#3111
When importing to Vaultwarden (or Bitwarden) notes larger then 10_000
encrypted characters are invalid. This because it for one isn't
compatible with Bitwarden. And some clients tend to break on very large
notes.
We already added a check for this limit when adding a single cipher, but
this caused issues during import, and could cause a partial imported
vault. Bitwarden does some validations before actually running it
through the import process and generates a special error message which
helps the user indicate which items are invalid during the import.
This PR adds that validation check and returns the same kind of error.
Fixes#3048
Recent versions of the Bitwarden clients (see bitwarden/clients#3574)
won't parse non-JSON responses. The most noticeable consequence is that
`/api/accounts/revision-date` responses won't be parsed, leading to
`/api/sync` always being called, even when it's not necessary.
Recent versions of the Bitwarden clients (see bitwarden/clients#3574)
won't parse non-JSON responses. The most noticeable consequence is that
`/api/accounts/revision-date` responses won't be parsed, leading to
`/api/sync` always being called, even when it's not necessary.
Recent versions of the Bitwarden clients (see bitwarden/clients#3574)
won't parse non-JSON responses. The most noticeable consequence is that
`/api/accounts/revision-date` responses won't be parsed, leading to
`/api/sync` always being called, even when it's not necessary.
When importing to Vaultwarden (or Bitwarden) notes larger then 10_000
encrypted characters are invalid. This because it for one isn't
compatible with Bitwarden. And some clients tend to break on very large
notes.
We already added a check for this limit when adding a single cipher, but
this caused issues during import, and could cause a partial imported
vault. Bitwarden does some validations before actually running it
through the import process and generates a special error message which
helps the user indicate which items are invalid during the import.
This PR adds that validation check and returns the same kind of error.
Fixes#3048
Recent versions of the Bitwarden clients (see bitwarden/clients#3574)
won't parse non-JSON responses. The most noticeable consequence is that
`/api/accounts/revision-date` responses won't be parsed, leading to
`/api/sync` always being called, even when it's not necessary.
As kinda discussed here #3090, the messages regarding loading the
configuration files is a bit strange or unclear. There have been some
other reports regarding this in the past, but wasn't that big a of a
deal.
But to make the whole process it bit more nice, this PR adjusts the way
it reports issues and some small changes to the messages to make it all
a bit more clear.
- Do not report a missing `.env` file, but only send a message when using one.
- Exit instead of Panic, a panic causes a stacktrace, which isn't needed
here. I'm using a exit code 255 here so it is different to the other
exit's we use.
- Exit on more issues, since if we continue, it could cause
configuration issues if the user thinks all is fine.
- Use the actual env file used in the messages instead of `.env`.
- Added a **INFO** message when loading the `config.json`.
This makes it consistent with the info message for loading the env file.
Resolves#3090
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
If the `YUBICO_SERVER` is defined to an empty string, the whole yubikey
implementation doesn't work anymore.
This PR adds a check for this variable that it at least starts with `https://`.
Resolves#3003
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
As kinda discussed here #3090, the messages regarding loading the
configuration files is a bit strange or unclear. There have been some
other reports regarding this in the past, but wasn't that big a of a
deal.
But to make the whole process it bit more nice, this PR adjusts the way
it reports issues and some small changes to the messages to make it all
a bit more clear.
- Do not report a missing `.env` file, but only send a message when using one.
- Exit instead of Panic, a panic causes a stacktrace, which isn't needed
here. I'm using a exit code 255 here so it is different to the other
exit's we use.
- Exit on more issues, since if we continue, it could cause
configuration issues if the user thinks all is fine.
- Use the actual env file used in the messages instead of `.env`.
- Added a **INFO** message when loading the `config.json`.
This makes it consistent with the info message for loading the env file.
Resolves#3090
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
If the `YUBICO_SERVER` is defined to an empty string, the whole yubikey
implementation doesn't work anymore.
This PR adds a check for this variable that it at least starts with `https://`.
Resolves#3003
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
- Updated dependencies.
This includes a janked openssl crate version we currently use.
- Updated MSRV to v1.61.0 because hashbrown/cached has this version restriction.
As kinda discussed here #3090, the messages regarding loading the
configuration files is a bit strange or unclear. There have been some
other reports regarding this in the past, but wasn't that big a of a
deal.
But to make the whole process it bit more nice, this PR adjusts the way
it reports issues and some small changes to the messages to make it all
a bit more clear.
- Do not report a missing `.env` file, but only send a message when using one.
- Exit instead of Panic, a panic causes a stacktrace, which isn't needed
here. I'm using a exit code 255 here so it is different to the other
exit's we use.
- Exit on more issues, since if we continue, it could cause
configuration issues if the user thinks all is fine.
- Use the actual env file used in the messages instead of `.env`.
- Added a **INFO** message when loading the `config.json`.
This makes it consistent with the info message for loading the env file.
Resolves#3090
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
If the `YUBICO_SERVER` is defined to an empty string, the whole yubikey
implementation doesn't work anymore.
This PR adds a check for this variable that it at least starts with `https://`.
Resolves#3003
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
If the `YUBICO_SERVER` is defined to an empty string, the whole yubikey
implementation doesn't work anymore.
This PR adds a check for this variable that it at least starts with `https://`.
Resolves#3003
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
If the `YUBICO_SERVER` is defined to an empty string, the whole yubikey
implementation doesn't work anymore.
This PR adds a check for this variable that it at least starts with `https://`.
Resolves#3003
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
If the `YUBICO_SERVER` is defined to an empty string, the whole yubikey
implementation doesn't work anymore.
This PR adds a check for this variable that it at least starts with `https://`.
Resolves#3003
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
Recent versions of the Bitwarden clients (see bitwarden/clients#3574)
won't parse non-JSON responses. The most noticeable consequence is that
`/api/accounts/revision-date` responses won't be parsed, leading to
`/api/sync` always being called, even when it's not necessary.
As kinda discussed here #3090, the messages regarding loading the
configuration files is a bit strange or unclear. There have been some
other reports regarding this in the past, but wasn't that big a of a
deal.
But to make the whole process it bit more nice, this PR adjusts the way
it reports issues and some small changes to the messages to make it all
a bit more clear.
- Do not report a missing `.env` file, but only send a message when using one.
- Exit instead of Panic, a panic causes a stacktrace, which isn't needed
here. I'm using a exit code 255 here so it is different to the other
exit's we use.
- Exit on more issues, since if we continue, it could cause
configuration issues if the user thinks all is fine.
- Use the actual env file used in the messages instead of `.env`.
- Added a **INFO** message when loading the `config.json`.
This makes it consistent with the info message for loading the env file.
Resolves#3090
- Removed `unsafe-inline` for javascript from CSP.
The admin interface now uses files instead of inline javascript.
- Modified javascript to work not being inline.
- Run eslint over javascript and fixed some items.
- Added a `to_json` Handlebars helper.
Used at the diagnostics page.
- Changed `AdminTemplateData` struct to be smaller.
The `config` was always added, but only used at one page.
Same goes for `can_backup` and `version`.
- Also inlined CSS.
We can't remove the `unsafe-inline` from css, because that seems to
break the web-vault currently. That might need some further checks.
But for now the 404 page and all the admin pages are clear of inline scripts and styles.
Previously the websocket notifications were using `app_id` as the
`ContextId`. This was incorrect and should have been the device_uuid
from the client device executing the request. The clients will ignore
the websocket request if the uuid matches. This also fixes some issues
with the Desktop client which is able to modify attachments within the
same screen and causes an issue when saving the attachment afterwards.
Also changed the way to handle removed attachments, since that causes an
error saving the vault cipher afterwards, complaining about a missing
attachment. Bitwarden ignores this, and continues with the remaining
attachments (if any). This also fixes#2591 .
Further some more websocket notifications have been added to some other
functions which enhance the user experience.
- Logout users when deauthed, changed password, rotated keys
- Trigger OrgSyncKeys on user confirm and removal
- Added some extra to the send feature
Also renamed UpdateTypes to match Bitwarden naming.
If the `YUBICO_SERVER` is defined to an empty string, the whole yubikey
implementation doesn't work anymore.
This PR adds a check for this variable that it at least starts with `https://`.
Resolves#3003
2022-12-29 12:45:18 +01:00
199 changed files with 20410 additions and 14662 deletions
📢 Note: This project was known as Bitwarden_RS and has been renamed to separate itself from the official Bitwarden server in the hopes of avoiding confusion and trademark/branding issues. Please see [#1642](https://github.com/dani-garcia/vaultwarden/discussions/1642) for more explanation.
This will preserve any persistent data under /vw-data/, you can adapt the path to whatever suits you.
**IMPORTANT**: Some web browsers, like Chrome, disallow the use of Web Crypto APIs in insecure contexts. In this case, you might get an error like `Cannot read property 'importKey'`. To solve this problem, you need to access the web vault from HTTPS.
**IMPORTANT**: Most modern web browsers disallow the use of Web Crypto APIs in insecure contexts. In this case, you might get an error like `Cannot read property 'importKey'`. To solve this problem, you need to access the web vault via HTTPS or localhost.
This can be configured in [vaultwarden directly](https://github.com/dani-garcia/vaultwarden/wiki/Enabling-HTTPS) or using a third-party reverse proxy ([some examples](https://github.com/dani-garcia/vaultwarden/wiki/Proxy-examples)).
@@ -49,9 +52,9 @@ If you have an available domain name, you can get HTTPS certificates with [Let's
See the [vaultwarden wiki](https://github.com/dani-garcia/vaultwarden/wiki) for more information on how to configure and run the vaultwarden server.
## Get in touch
To ask a question, offer suggestions or new features or to get help configuring or installing the software, please [use the forum](https://vaultwarden.discourse.group/).
To ask a question, offer suggestions or new features or to get help configuring or installing the software, please use [GitHub Discussions](https://github.com/dani-garcia/vaultwarden/discussions) or [the forum](https://vaultwarden.discourse.group/).
If you spot any bugs or crashes with vaultwarden itself, please [create an issue](https://github.com/dani-garcia/vaultwarden/issues/). Make sure there aren't any similar issues open, though!
If you spot any bugs or crashes with vaultwarden itself, please [create an issue](https://github.com/dani-garcia/vaultwarden/issues/). Make sure you are on the latest version and there aren't any similar issues open, though!
If you prefer to chat, we're usually hanging around at [#vaultwarden:matrix.org](https://matrix.to/#/#vaultwarden:matrix.org) room on Matrix. Feel free to join us!
@@ -89,4 +92,11 @@ Thanks for your contribution to the project!
To make it a bit more easier to trigger a build, there also is a `bake.sh` script.<br>
This script calls `docker buildx bake` with all the right parameters and also generates the `SOURCE_COMMIT` and `SOURCE_VERSION` variables.<br>
This script can be called from both the repo root or within the docker directory.
So, if you want to build a Multi Arch Alpine container pushing to your localhost registry you can run this from within the docker directory. (Just make sure you executed the initialization steps above first)
Or if you want to just build a Debian container from the repo root, you can run this.
```bash
docker/bake.sh
```
You can append both `alpine` and `debian` with `-amd64`, `-arm64`, `-armv7` or `-armv6`, which will trigger a build for that specific platform.<br>
This will also append those values to the tag so you can see the builded container when running `docker images`.
You can also append extra arguments after the target if you want. This can be useful for example to print what bake will use.
```bash
docker/bake.sh alpine-all --print
```
### Testing baked images
To test these images you can run these images by using the correct tag and provide the platform.<br>
For example, after you have build an arm64 image via `./bake.sh debian-arm64` you can run:
```bash
docker run --rm -it \
-e DISABLE_ADMIN_TOKEN=true\
-e I_REALLY_WANT_VOLATILE_STORAGE=true\
-p8080:80 --platform=linux/arm64 \
vaultwarden/server:testing-arm64
```
## Using the `podman-bake.sh` script
To also make building easier using podman, there is a `podman-bake.sh` script.<br>
This script calls `podman buildx build` with the needed parameters and the same as `bake.sh`, it will generate some variables automatically.<br>
This script can be called from both the repo root or within the docker directory.
**NOTE:** Unlike the `bake.sh` script, this only supports a single `CONTAINER_REGISTRIES`, and a single `BASE_TAGS` value, no comma separated values. It also only supports building separate architectures, no Multi Arch containers.
To build an Alpine arm64 image with only sqlite support and mimalloc, run this:
```bash
DB="sqlite,enable_mimalloc"\
./podman-bake.sh alpine-arm64
```
Or if you want to just build a Debian container from the repo root, you can run this.
```bash
docker/podman-bake.sh
```
You can append extra arguments after the target if you want. This can be useful for example to disable cache like this.
```bash
./podman-bake.sh alpine-arm64 --no-cache
```
For the podman builds you can, just like the `bake.sh` script, also append the architecture to build for that specific platform.<br>
### Testing podman builded images
The command to start a podman built container is almost the same as for the docker/bake built containers. The images start with `localhost/`, so you need to prepend that.
| CARGO_PROFILE | null | Which cargo profile to use. `null` means what is defined in the Dockerfile |
| DB | null | Which `features` to build. `null` means what is defined in the Dockerfile |
| SOURCE_REPOSITORY_URL | null | The source repository form where this build is triggered |
| SOURCE_COMMIT | null | The commit hash of the current commit for this build |
| SOURCE_VERSION | null | The current exact tag of this commit, else the last tag and the first 8 chars of the source commit |
| BASE_TAGS | testing | Tags to be used. Can be a comma separated value like "latest,1.29.2" |
| CONTAINER_REGISTRIES | vaultwarden/server | Comma separated value of container registries. Like `ghcr.io/dani-garcia/vaultwarden,docker.io/vaultwarden/server` |
| VW_VERSION | null | To override the `SOURCE_VERSION` value. This is also used by the `build.rs` code for example |
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
gzfrozen