Updated all the crates to the latest version.
We can unpin mimalloc, since the musl issues have been fixed
Also fix a RUSTSEC https://osv.dev/vulnerability/RUSTSEC-2025-0023 for tokio
Fixed some clippy lints reported by nightly.
Ensure lints and are also run on the macro crate.
This resulted in some lints being triggered, which I fixed.
Updated some GHA uses.
Signed-off-by: BlackDex <black.dex@gmail.com>
In previous attempts to get mysqlclient-sys to build and work I added some extra build variables.
These are not needed if you configure pkg-config correctly.
The same goes for OpenSSL btw.
This PR configures the pkg-config in the right way and allows the crates to build using the right lib paths automatically.
Because of this change also the lib/include paths were not needed anymore for some architectures, except for i386.
Also updated crates again.
Signed-off-by: BlackDex <black.dex@gmail.com>
Added the same check as done via GitHub Actions to check template changes to the pre-commit checks.
This should catch these mistakes before they are commited and pushed.
Signed-off-by: BlackDex <black.dex@gmail.com>
Because of some issues with mysqlclient we need to use buildtime bindgen.
This also needed some extra environment variables to point the bindgen to the correct files and correct version.
Also update some other crates.
Signed-off-by: BlackDex <black.dex@gmail.com>
- Updated crates
Pinned mimalloc, since it has issues with musl
- Updated web-vault to v2025.3.1
- Updated bootstrap
Signed-off-by: BlackDex <black.dex@gmail.com>
- Added a new org policy
- Some new lint fixes
- Crate updates
Switched to `pastey`, since `paste` is unmaintained.
Signed-off-by: BlackDex <black.dex@gmail.com>
Because we were using the `has_full_access()` function we did not returned assigned collections for an owner/admin even if the did not have the `access_all` flag set.
This commit will change that to use the `access_all` flag instead, and return assigned collections too.
While saving a member and having it assigned collections would still save those rights, and it was also visible in the collection management, it wasn't at the member it self.
So, it did work, but was not visible.
Fixes#5554Fixes#5555
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix icon redirect not working on desktop
We also need to exclude the header in case we do an external_icon call.
Fixes#5535
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add informational comments to the icon_external function
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix spelling/grammar
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* Allow all manager to create collections again
This commit checks if the member is a manager or better, and if so allows it to createCollections.
We actually check if it is less then a Manager, since the `limitCollectionCreation` should be set to false to allow it and true to prevent.
This should fix an issue discussed in #5484
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix some small issues
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* add additional event_types
* use correct event_type when leaving an org
* use correct event type when deleting a user
* also correctly log auth requests
* add correct membership info to event log
* Security fixes for admin and sendmail
Because the Vaultwarden Admin Backend endpoints did not validated the Content-Type during a request, it was possible to update settings via CSRF. But, this was only possible if there was no `ADMIN_TOKEN` set at all. To make sure these environments are also safe I added the needed content-type checks at the functions.
This could cause some users who have scripts which uses cURL for example to adjust there commands to provide the correct headers.
By using a crafted favicon and having access to the Admin Backend an attacker could run custom commands on the host/container where Vaultwarden is running on. The main issue here is that we allowed the sendmail binary name/path to be changed. To mitigate this we removed this configuration item and only then `sendmail` binary as a name can be used.
This could cause some issues where the `sendmail` binary is not in the `$PATH` and thus not able to be started. In these cases the admins should make sure `$PATH` is set correctly or create a custom shell script or symlink at a location which is in the `$PATH`.
Added an extra security header and adjusted the CSP to be more strict by setting `default-src` to `none` and added the needed missing specific policies.
Also created a general email validation function which does some more checking to catch invalid email address not found by the email_address crate.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix security issue with organizationId validation
Because of a invalid check/validation of the OrganizationId which most of the time is located in the path but sometimes provided as a URL Parameter, the parameter overruled the path ID during the Guard checks.
This resulted in someone being able to execute commands as an Admin or Owner of the OrganizationId fetched from the parameter, but the API endpoints then used the OrganizationId located in the path instead.
This commit fixes the extraction of the OrganizationId in the Guard and also added some extra validations of this OrgId in several functions.
Also added an extra `OrgMemberHeaders` which can be used to only allow access to organization endpoints which should only be accessible by members of that org.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Update server version in config endpoint
Updated the server version reported to the clients to `2025.1.0`.
This should make Vaultwarden future proof for the newer clients released by Bitwarden.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix and adjust build workflow
The build workflow had an issue with some `if` checks.
For one they had two `$` signs, and it is not recommended to use `always()` since canceling a workflow does not cancel those calls.
Using `!cancelled()` is the preferred way.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Update crates
Signed-off-by: BlackDex <black.dex@gmail.com>
* Allow sendmail to be configurable
This reverts a previous change which removed the sendmail to be configurable.
We now set the config to be read-only, and omit all read-only values from being stored during a save action from the admin interface.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add more org_id checks
Added more org_id checks at all functions which use the org_id in there path.
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add manage role for collections and groups
This commit will add the manage role/column to collections and groups.
We need this to allow users part of a collection either directly or via groups to be able to delete ciphers.
Without this, they are only able to either edit or view them when using new clients, since these check the manage role.
Still trying to keep it compatible with previous versions and able to revert to an older Vaultwarden version and the `access_all` feature of the older installations.
In a future version we should really check and fix these rights and create some kind of migration step to also remove the `access_all` feature and convert that to a `manage` option.
But this commit at least creates the base for this already.
This should resolve#5367
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix an issue with access_all
If owners or admins do not have the `access_all` flag set, in case they do not want to see all collection on the password manager view, they didn't see any collections at all anymore.
This should fix that they are still able to view all the collections and have access to it.
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add Attestations for containers and artifacts
This commit will add attestation actions to sign the containers and binaries which can be verified via the gh cli.
https://cli.github.com/manual/gh_attestation_verify
The binaries from both Alpine and Debian based images are extracted and attested so that you can verify the binaries of all the containers.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Adjust attest to use globbing
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
During the refactoring done in #5320 there has a buggy slipped through which changed a uuid.
This commit fixes this, and also made some vars pass by reference.
Fixes#5377
Signed-off-by: BlackDex <black.dex@gmail.com>
* rename membership
rename UserOrganization to Membership to clarify the relation
and prevent confusion whether something refers to a member(ship) or user
* use newtype pattern
* implement custom derive macro IdFromParam
* add UuidFromParam macro for UUIDs
* add macros to Docker build
Co-authored-by: dfunkt <dfunkt@users.noreply.github.com>
---------
Co-authored-by: dfunkt <dfunkt@users.noreply.github.com>
* Prevent new users/members when invite fails
Currently when a (new) user gets invited as a member to an org, and SMTP is enabled, but sending the invite fails, the user is still created.
They will only not have received a mail, and admins/owners need to re-invite the member again.
Since the dialog window still keeps on-top when this fails, it kinda invites to click try again, but that will fail in mentioning the user is already a member.
To prevent this weird flow, this commit will delete the user, invite and member if sending the mail failed.
This allows the inviter to try again if there was a temporary hiccup for example, or contact the server admin and does not leave stray users/members around.
Fixes#5349
Signed-off-by: BlackDex <black.dex@gmail.com>
* Adjust deleting records
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
The new web-vault seems to call an extra endpoint, which looks like it is only used when passkeys can be used for login.
Since we do not support this (yet), we can just return an empty data object.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add partial role support for manager only
- Add the custom role which replaces the manager role
- Added mini-details endpoint used by v2024.11.1
These changes try to add the custom role in such a way that it stays compatible with the older manager role.
It will convert a manager role into a custom role, and if a manager has `access-all` rights, it will enable the correct custom roles.
Upon saving it will convert these back to the old format.
What this does is making sure you are able to revert back to an older version of Vaultwarden without issues.
This way we can support newer web-vault's and still be compatible with a previous Vaultwarden version if needed.
In the future this needs to be changed to full role support though.
Fixed the 2FA hide CSS since the order of options has changed
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix hide passkey login
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix hide create account
Signed-off-by: BlackDex <black.dex@gmail.com>
* Small changes for v2024.12.0
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix hide create account link
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add pre-release web-vault
Signed-off-by: BlackDex <black.dex@gmail.com>
* Rename function to mention swapping uuid's
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* Refactor the uri match change
Refactored the uri match fix to also convert numbers within a string to an int.
If it fails it will be null.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix ssh-key sync issues
If any of the mandatory ssh-key json data values are not a string or are an empty string, this will break the mobile clients.
This commit fixes this by checking if any of the values are missing or invalid and converts the json data to `null`.
It will ensure the clients can sync and show the vault.
Fixes#5343Fixes#5322
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
Bitwarden allows to use self-hosted forwarded email services.
But for this to work you need to add custom URL's to the `connect-src` CSP entry.
This commit allows setting this and checks if the URL starts with `https://` else it will abort loading.
Fixes#5290
Signed-off-by: BlackDex <black.dex@gmail.com>
- Refactored several code to use more modern syntax
- Made some checks a bit more strict
- Updated crates
Signed-off-by: BlackDex <black.dex@gmail.com>
* Some Backend Admin fixes and updates
- Updated datatables
- Added a `X-Robots-Tags` header to prevent indexing
- Modified some layout settings
- Added Websocket check to diagnostics
- Added Security Header checks to diagnostics
- Added Error page response checks to diagnostics
- Modifed support string layout a bit
Signed-off-by: BlackDex <black.dex@gmail.com>
* Some small fixes
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
The `reprompt` value somehow sometimes has a value of `4`.
This isn't a valid value, and doesn't cause issues with other clients, but the native clients are more strict.
This commit fixes this by validating the value before storing and returning.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Update Rust and crates
- Updated Rust to v1.83.0
- Updated MSRV to v1.82.0 (Needed for html5gum crate)
- Updated icon fetching code to match new html5gum version
- Updated workflows
- Enabled edition 2024 clippy lints
Nightly reports some clippy hints, but that would be too much to change in this PR i think.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Some additional updates
- Patch fern to allow syslog-7 feature
- Fixed diesel logger which was broken because of the sqlite backup feature
Refactored the sqlite backup because of this
- Added a build workflow test to include the query_logger feature
Signed-off-by: BlackDex <black.dex@gmail.com>
* Also patch yubico-rs and latest updates
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
With web-vault v2024.6.2 and lower, if a user has access-all rights either as an org-member or via a group it shouldn't return individual collections.
This probably needs to be changed with newer versions which do not support the `access-all` feature anymore and work with manage.
But with the current version this should solve access right issues.
Fixes#5212
Signed-off-by: BlackDex <black.dex@gmail.com>
The new native mobile clients seem to use PascalCase for the push payload.
Also the date/time could cause issues.
This PR fixes this by formatting the date/time correctly and use PascalCase for the payload key's
I now receive cipher updates and login-with-device requests again.
Fixes#5182
Signed-off-by: BlackDex <black.dex@gmail.com>
This fixes an issue with collections be duplicated same as was an issue with folders.
Also made some optimizations by using HashSet where possible and device the Vec/Hash capacity.
And instead of passing objects only use the UUID which was the only value we needed.
Also found an issue with importing a personal export via the Org import where folders are used.
Since Org's do not use folder we needed to clear those out, same as Bitwarden does.
Fixes#5193
Signed-off-by: BlackDex <black.dex@gmail.com>
* fix password hint check
don't show password hints if you have disabled the hints with
PASSWORD_HINTS_ALLOWED=false or if you have not configured mail and
opted into showing password hints
* update descriptions for pw hints options
2FA is needed to login even when using login-with-device.
If the user didn't saved the 2FA token they still need to provide this.
We deleted the auth-request after validation the request, but before 2FA was triggered.
Removing the deletion of this record from that point as it will get cleaned-up automatically anyways.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add dynamic CSS support
Together with https://github.com/dani-garcia/bw_web_builds/pull/180 this PR will add support for dynamic CSS changes.
For example, we could hide the register link if signups are not allowed.
In the future show or hide the SSO button depending on if it is enabled or not.
There also is a special `user.vaultwarden.scss` file so that users can add custom CSS without the need to modify the default (static) changes.
This will prevent future changes from not being applied and still have the custom user changes to be added.
Also added a special redirect when someone goes directly to `/index.html` as that might cause issues with loading other scripts and files.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add versions and fallback to built-in
- Add both Vaultwarden and web-vault versions to the css_options.
- Fallback to the inner templates if rendering or compiling the scss fails.
This ensures the basics are always working even if someone breaks the templates.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix fallback code to actually work
The fallback now works by using an alternative `reg!` macro.
This adds an extra template register which prefixes the template with `fallback_`.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Updated the wiki link in the user template
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
A possible user disclosure when you invite an user into an organization which already has an account on the same instance.
This was because we always returned the user's name.
To prevent this, this PR only returns the user's name if the status is accepted or higher, else we will return null.
This is the same as Bitwarden does.
Resolves a reported issue.
Also resolved a new `nightly` reported clippy regarding a regex within a loop.
- Fixed collection management to be usable from the Password Manager UI
- Checked and brought in-to-sync with upstream several json responses
- Fixed a small issue with the `fields` response when it was empty
Signed-off-by: BlackDex <black.dex@gmail.com>
Ever since we changed to pass the full url as a template value handlebars now html-encodes this.
This causes issues with the plain/text mails, but it also could potentially cause issues with the text/html templates.
This PR encloses the template values inside triple braces `{{{ }}}` which prevents html-encoding.
Since the URL is generated via the `url` crate the values are percent-encoded anyway.
Fixes#5097
Signed-off-by: BlackDex <black.dex@gmail.com>
In an oversight i forgot to set the type to a hidden type if converting the int was not possible.
This fixes that.
Signed-off-by: BlackDex <black.dex@gmail.com>
It seems the iOS clients are not able to handle the `type` key within the `fields` array when they are of the type string.
All other clients seem to handle this just fine though.
This PR fixes this by validating it is a number, if this is not the case, try to convert the string to a number, or return the default of `1`.
`1` is used as this is the type `hidden` and should prevent accidental data disclosure.
Fixes#5069
Possibly Fixes#5016
Possibly Fixes#5002
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix `--version` from failing without config
Since we added the option to show the web-vault version also when running `--version` this causes the config to always be validated.
While this is not very bad in general, it could cause the command to quit during the config validation, and not show the version, but also errors.
This is probably not very useful for this specific command, unlike the `--backup` for example.
To fix this, and preventing the config from being validated, i added an AtomicBool to check if we need to validate the config on first load.
This prevents errors, and will just show the Vaultwarden version, and if possible the web-vault version too.
Fixes#5046
Signed-off-by: BlackDex <black.dex@gmail.com>
* Adjusted the code bsaed upon review
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* Fix collections not editable by managers
Since a newer version of the web-vault we use manager were not able to create sub collections anymore.
This was because of some missing details in the response of some json objects.
This commit fixes this by using the `to_json_details` instead of the `to_json`
Fixes#5066Fixes#5044
* Update crates and GitHub Actions
- Updated all the crates
- Updated all the GHA dependencies
- Configured the trivy workflow to only run on the main repo and not on forks
Also selected a random new scheduled date so it will not run at the same time as all other forks.
The two changes should help running this scan every day without failing, and also prevent the same for new or updated forks.
The `unix::signal` was also included during Windows compilations.
This of course will not work. Fix this by only including it for `unix` targets.
Also changed all other conditional compilation options to use `cfg(unix)` instead of `cfg(not(windows))`.
The latter may also include `wasm` for example, or any other future target family.
This way we will only match `unix`
Fixes#5052
* Add extra linting
Added extra linting for some code styles.
Also added the Rust Edition 2024 lints.
Closes#4974
Signed-off-by: BlackDex <black.dex@gmail.com>
* Adjusted according to comments
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* Avoid keyword collision with gen in Rust 2024
* Include new api/config setting to disable user registration, not yet used by clients
* Actually qualify CONFIG
It appears that some password histories have an encrypted value on the `lastUsedDate`
Instead of only checking if it is a string, also check if it is a valid RFC Date/Time String.
If not, set it also to epoch 0.
Signed-off-by: BlackDex <black.dex@gmail.com>
- Updated the web-vault to fix an issue with personal export.
Thanks to @stefan0xC for patching this.
Fixes#4875
- Updated crates to there latest version
- Updated the GitHub Actions
- Updated the xx image to the latest version
Signed-off-by: BlackDex <black.dex@gmail.com>
* Add a CLI feature to backup the SQLite DB
Many users request to add the sqlite3 binary to the container image.
This isn't really ideal as that might bring in other dependencies and will only bloat the image.
There main reason is to create a backup of the database.
While there already was a feature within the admin interface to do so (or by using the admin API call), this might not be easy.
This PR adds several ways to generate a backup.
1. By calling the Vaultwarden binary with the `backup` command like:
- `/vaultwarden backup`
- `docker exec -it vaultwarden /vaultwarden backup`
2. By sending the USR1 signal to the running process like:
- `kill -s USR1 $(pidof vaultwarden)
- `killall -s USR1 vaultwarden)
This should help users to more easily create backups of there SQLite database.
Also added the Web-Vault version number when using `-v/--version` to the output.
Signed-off-by: BlackDex <black.dex@gmail.com>
* Spelling and small adjustments
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* Allow enforcing Single Org with pw reset policy
Bitwarden only allows the Reset Password policy to be set when the Single Org policy is enabled already.
This PR adds a check so that this can be enforced when a config option is enabled.
Since Vaultwarden encouraged to use multiple orgs when groups were not available yet we should not enable this by default now.
This might be something to do in the future.
When enabled, it will prevent the Reset Password policy to be enabled if the Single Org policy is not enabled.
It will also prevent the Single Org policy to be disabled if the Reset Password policy is enabled.
Fixes#4855
Signed-off-by: BlackDex <black.dex@gmail.com>
* Removed some extra if checks
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
* Allow Org Master-Pw policy enforcement
We didn't returned the master password policy for the user.
If the `Require existing members to change their passwords` check was enabled this should trigger the login to show a change password dialog.
All the master password policies are merged into one during the login response and it will contain the max values and all `true` values which are set by all the different orgs if a user is an accepted member.
Fixes#4507
Signed-off-by: BlackDex <black.dex@gmail.com>
* Use .reduce instead of .fold
Signed-off-by: BlackDex <black.dex@gmail.com>
---------
Signed-off-by: BlackDex <black.dex@gmail.com>
To provide a way to add more security regarding file/folder permissions
this PR adds a way to allow setting a custom `UMASK` variable.
This allows people to set a more secure default like only allowing the
owner the the process/container to read/write files and folders.
Examples:
- `UMASK=022` File: 644 | Folder: 755 (Default of the containers)
This means Owner read/write and group/world read-only
- `UMASK=027` File: 640 | Folder: 750
This means Owner read/write, group read-only, world no access
- `UMASK=077` File: 600 | Folder: 700
This measn Owner read/write and group/world no access
resolves#4571
Signed-off-by: BlackDex <black.dex@gmail.com>
- Updated crates
- Fixed MSRV to actually be N-2
- Changed some features to use the `dep:` prefix.
This is needed for edition-2024 anyway although that will be a while before we can use that.
Signed-off-by: BlackDex <black.dex@gmail.com>
Updated the issue template a bit regarding some remarks in the previous pr.
Also made it so that collapsing all items will show all the specific
item id's instead of there types. Easy for editiing :).
Signed-off-by: BlackDex <black.dex@gmail.com>
Fixed an issue with login with device for the new Bitwrden Beta clients.
They seem to not support ISO8601 milli date/time, only micro.
Also updated the device display names to match Upstream and added the
CLI devices which were missing.
Signed-off-by: BlackDex <black.dex@gmail.com>
Updated the issue template to use a form and guide users to provide all
information useful to troublshoot issues
Als updated links to prefer the usage of GitHub Discussions.
Signed-off-by: BlackDex <black.dex@gmail.com>
Since the change to camelCase variables the error messages in the
Vaultwarden Admin were not shown correctly anymore.
This PR fixes this by changing the case of the json key's.
Also updated the save and delete of the config to provide a more
descriptive error instead of only `Io` or which ever other error might
occure.
Fixes#4834
The web-vault v2024.6.2 we use needs some extra information to allow
managers to actually be able to manage collections.
The v2024.6.2 web-vault has somewhat of a mixture of the newer roles and
older manager roles. To at least fix this for the web-vault we bundle
these changes will make the manager able to manage.
For future web-vaults we would need a lot more changes to be done to fix
this in a better way though.
Fixes#4844
The URL crate treats `https://domain.tld/path` differently then
`https://domain.tld/path/` the latter will make sure a `.join()` will
append the given path instead of using the base as a relative path.
Fixes#4858
- All users were able to request organizational details from any org,
even if they were not a member (anymore).
Now it will check if that user is a member of the org or not.
- The `/organization/<uuid>/keys` endpoint returned also the private keys.
This should not be the case. Also, according to the upstream server
code the endpoint changed, but the clients do not seem to use it.
I added it anyway just in case they will in the future.
- Also require a valid login before being able to retreve those org
keys. Upstream does not do this, but i see no reason why not.
Fixes: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-39925
* Update crates, web-vault and fixes
- Updated crates
- Updated web-vault to v2024.6.2
This version is currently the latest version compatible with our API implementation.
For newer versions we need more code updates to make it compatible.
Thanks to @stefan0xC this version fixes#4628
- Added a small fix to prevent errors in the Vaultwarden and Client logs.
The v2024.6.2 web-vault calls an endpoint with invalid arguments.
If this happens we ignore the call and just return an Ok.
- Added the bulk-collection endpoint (Though not yet available in v2024.6.2)
Fixes#4628
* Prevent bulk remove collections to work
Currently there are no checks done during the actual upload of the file of a send item.
This PR adds several checks to make sure it only accepts the correct uploads.
This PR adds a config option to allow the note size to increase to 100_000, instead of the default 10_000.
Since this might cause issues with the clients (in the future), and will cause issues with importing into a Bitwarden server, i added warnings regarding this.
Closes#3168
* Add initial working Duo Universal Prompt support.
* Add db schema and models for Duo 2FA state storage
* store duo states in the database and validate during authentication
* cleanup & comments
* bump state/nonce length
* replace stray use of TimeDelta
* more cleanup
* bind Duo oauth flow to device id, drop redundant device type handling
* drop redundant alphanum string generation code
* error handling cleanup
* directly use JWT_VALIDITY_SECS constant instead of copying it to DuoClient instances
* remove redundant explicit returns, rustfmt
* rearrange constants, update comments, error message
* override charset on duo state column to ascii for mysql
* Reduce twofactor_duo_ctx state/nonce column size in postgres and maria
* Add fixes suggested by clippy
* rustfmt
* Update to use the make_http_request
* Don't handle OrganizationDuo
* move Duo API endpoint fmt strings out of macros and into format! calls
* Add missing indentation
Co-authored-by: Daniel García <dani-garcia@users.noreply.github.com>
* remove redundant expiry check when purging Duo contexts
---------
Co-authored-by: BlackDex <black.dex@gmail.com>
Co-authored-by: Daniel García <dani-garcia@users.noreply.github.com>
* allow re-invitations of existing users
* auto-accept existing user if mail is disabled
Apply suggestions from code review
Co-authored-by: Mathijs van Veluw <black.dex@gmail.com>
---------
Co-authored-by: Mathijs van Veluw <black.dex@gmail.com>
* Fix for RSA Keys which are read only
Sometimes an RSA Key file could be read only.
We currently failed because we also wanted to write.
Added an extra check if the file exists already and is not 0 in size.
If it does already exists and is larger then 0, then open in read only
mode.
Fixes#4644
* Updated code to work atomically
- Changed the code to work atomically
- Also show the alert generated from `Io`
* Fix spelling
- Updated datatables
- Set Cookie Secure flag if the connection is https
- Prevent possible XSS via Organization Name
Converted all `innerHTML` and `innerText` to the Safe Sink version `textContent`
- Removed `jsesc` function as handlebars escapes all these chars already and more by default
- Add missing `Headers` parameter for some functions
This allowed any request from allowing these endpoints by not validating the user correctly.
- Changed the functions to retreive the emergency access record by
using the user uuid which calls the endpoint, instead of validating afterwards.
This is more secure and prevents the need of an if check.
- Updated the crates
Removed the patch for mimalloc
- Updated the web-vault to v2024.5.1b
The reason for not updating to v2024.6.x is that there are several items
not working correctly or need some more research.
* add group support for Cipher::get_collections()
join group infos assigned to a collection to check
whether user has been given access to all collections via any group
or they have access to a specific collection via any group membership
* fix Collection::is_writable_by_user()
prevent side effects if groups are disabled
* differentiate the /collection endpoints
* return cipherDetails on post_collections_update()
* add collections_v2 endpoint
During import you are able to select an existing folder, or with
Bitwarden exports it can contain existing folders already. In either
case it didn't matter, we always created new folders.
Bitwarden uses the same UUID of the selected or existing folders if they
are already there.
This PR fixes this by using the same behaviour.
Fixes#4700
Collections were not visible in the organization view.
This was because the `flexibleCollections` was set to `true`
Found an issue with loading some old created Secure Notes which had `{}` or `{"type":null}` as there `data` value.
This isn't allowed. When detected, replace it with `{"type":0}`
Fixes#4682Fixes#4590
* Change API inputs/outputs and structs to camelCase
* Fix fields and password history
* Use convert_json_key_lcase_first
* Make sends lowercase
* Update admin and templates
* Update org revoke
* Fix sends expecting size to be a string on mobile
* Convert two-factor providers to string
- Updated all crates including Diesel and the new mysqlclient-sys
- Updated the MSRV to v1.78 as that is what Diesel mandates
- Added the mimalloc crate as a patch for now to fix armv6 static builds
This probably makes #4606 possible
- Updated web-vault to v2024.5.1
- Updated GitHub Actions
Fixed an issue with the localhost images for extracting the musl binaries.
Move some ARGs closer to the build stage (potentially improving caching)
Remove redundant COPY commands
Remove redundant RUN command
Move CARGO_HOME's "&&" operator to the first line (improves consistency)
* fix emergency access invites with no mail
when mail is disabled instead of accepting emergency access for all
invited users automatically, we only accept if the user already exists
on registration of a new account any open emergency access invitations
will be accepted, if mail is disabled
also prevent invited emergency access contacts to register if emergency
access is disabled (this is only relevant for when mail is enabled, if
mail is disabled they should have an Invitation entry)
* delete emergency access invitations
if an invited user is deleted in the /admin panel their emergency
access invitation will remain in the database which causes
the to_json_grantee_details fn to panic
* improve missing emergency access grantees
instead of returning an empty emergency access contact the entry should
not be added to the list. also the error handling can be improved a bit.
There was a PR (#4370) to add i686/i386 support for Vaultwarden.
That specific PR was not a viable way of adding this.
This PR adds extra architectures for Debian based containers which we
will not support by default. Those images will not be build and pushed
to our container registries.
Added the following architectures:
- linux/386
- linux/ppc64le
- linux/s390x
Again, there will be no major support for these architectures, but it
will allow people who use these architectures to build a Debian based
binary more easily
Key rotation was changed since 2024.1.x.
Multiple other items were added to be rotated like password-reset and emergency-access data to be part of just one POST instead of having multiple.
See: https://github.com/dani-garcia/bw_web_builds/pull/157
- Updated Rust to v1.77.0
- Updated several crates
The `reqwest` update included `trust-dns` > `hickory-dns` changes.
Also, `reqwest` v0.12 is not working correctly for us, that is something to investigate.
- Fixed a new clippy warning
- Updated sqlite crate
- Updated chrono crate
The latter needed a lot of changes done, mostly `Duration` to `TimeDelta`.
And some changes on how to use Naive.
* Fix#3624: fix manager permission within groups
* Query returns UUID only
* Fix issue when user is manager and in a group having access to all collections
* optimize condition check
* fix(groups): renaming and optimizations
* fix: wrong organization group membership detection
* Simplify group membership check
Co-authored-by: Stefan Melmuk <509385+stefan0xC@users.noreply.github.com>
* Remove unused statement
* improve check if the user has access via groups
instead of returning the two lists of member ids and later checking if
they contain the uuid of the current user, we really only care if
the current user has full access via a group or if they have
access to a given collection via a group
* improve comments for get_org_collections_details
* small refactor to make it easier to review
* fix(groups): query full access via group only when necessary
Co-authored-by: Mathijs van Veluw <black.dex@gmail.com>
* chore(fmt): apply rustfmt
---------
Co-authored-by: Stefan Melmuk <509385+stefan0xC@users.noreply.github.com>
Co-authored-by: Stefan Melmuk <stefan.melmuk@gmail.com>
Co-authored-by: Mathijs van Veluw <black.dex@gmail.com>
* Remove custom WebSocket code
Remove our custom WebSocket code and only use the Rocket code.
Removed all options in regards to WebSockets
Added a new option `WEBSOCKET_DISABLED` which defaults too `false`.
This can be used to disable WebSockets if you really do not want to use it.
* Addressed remarks given and some updates
- Addressed comments given during review
- Updated crates, including Rocket to the latest merged v0.5 changes
- Removed an extra header which should not be sent for websocket connections
* Updated suggestions and crates
- Addressed the suggestions
- Updated Rocket to latest rc4
Also made the needed code changes
- Updated all other crates
Pinned `openssl` and `openssl-sys`
---------
Co-authored-by: Daniel García <dani-garcia@users.noreply.github.com>
- Update all crates
- Update GHA
- Update Global Domains script to use main instead of master
Also fixed some Python linting warnings
- Updated Admin JS and CSS libraries
* fix: update env template for systemd compatibility
Adjust env template to ensure compatibility with systemd's EnvironmentFile parsing, which only recognizes line-starting comment symbols.
* Refactor SMTP and Rocket settings in .env.template
- Simplify the SMTP_SECURITY and SMTP_PORT options by providing a list of choices and default values
- Clarify the ROCKET_PORT default value depending on the environment (Docker or not)
- Updated Rust to v1.76.0
- Updated crates
- Updated web-vault to v2024.1.2b
- Fixed some Clippy lints
- Moved lint check configuration Cargo.toml
- Fixed issue with Reset Password Enrollment when logged-in via device
Also check if we are running within a Kubernetes environment.
These do not always run using Docker or Podman of course.
Also renamed all the functions and variables to use `container` instead
of `docker`.
It seems Debian based images see the `.env` file in the `pwd` path, but
sourcing it via `. .env` breaks. It does work if you provide the full
path `/.env`. Changed the default to `/.env`.
Alpine does not have an issue with both ways.
* update env template to fit the config.rs
* Categorize env template settings
* Fix a wrong setting
* Fix wrong icon redirect code
* Fix ICON_DOWNLOAD_TIMEOUT default value
Co-authored-by: Daniel <daniel.barabasa@gmail.com>
* Move related settings together.
Merge Yubikey, Duo, Email 2FA sections into one.
Other minor fixes.
* Minor fix of some settings position
* Add some comment
* Minor fix.
---------
Co-authored-by: Daniel <daniel.barabasa@gmail.com>
* enforce 2fa policy on removal of second factor
users should be revoked when their second factors are removed.
we want to revoke users so they don't have to be invited again and
organization admins and owners are aware that they no longer have
access.
we make an exception for non-confirmed users to speed up the invitation
process as they would have to be restored before they can accept their
invitation or be confirmed.
if email is enabled, invited users have to add a second factor before
they can accept the invitation to an organization with 2fa policy.
and if it is not enabled that check is done when confirming the user.
* use &str instead of String in log_event()
* enforce the 2fa policy on login
if a user doesn't have a second factor check if they are in an
organization that has the 2fa policy enabled to revoke their access
* Allow customizing the featureStates
Use a comma separated list of features to enable using the FEATURE_FLAGS env variable
* Move feature flag parsing to util
* Fix formatting
* Update supported feature flags
* Rename feature_flags to experimental_client_feature_flags
Additionally, use a caret (^) instead of an exclamation mark (!) to disable features
* Fix formatting issue.
* Add documentation to env template
* Remove functionality to disable feature flags
* Fix JSON key for feature states
* Convert error to warning when feature flag is unrecognized
* Simplify parsing of feature flags
* Fix default value of feature flags in env template
* Fix formatting
There was an error in the single org policy check to determine how many
users there are in an org. The `or` check was at the wrong location in
the DSL.
This is now fixed.
Fixes#4205
OpenWRT is a project which builds and distributes firmware for
embedded devies like routers, access points, and so on. These
devices are usually very limited in terms of storage. Therefore,
optimizing binaries for size at the cost of execution speed is
usually desired.
This PR adds an additional build-target, namely "release-micro",
which implements several parameters which optimize in favor of
binary size.
The following parameters were chosen:
- opt-level "z": Optimize for size with disabled loop vectorization
- strip "symbols": Strip debuginfo and symbols from binary
- lto "fat": Enable link-time optimizations across all crates
- codegen-units 1: Disable parallelization of code generation to
allow for additional optimizations
- panic "abort": Abort on Panic() instead of unwinding
All these build parameters significantly reduce the binary size
from >40MB to <15MB - the actual amount depends on the target
architecture.
We would like to upstream this new build target to keep our build
environment simple. Other projects which deploy vaultwarden on
size-constrained environments may benefit from this change too.
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Large JWT's could cause issue because of header or body sizes of the
HTTP request could get too large when you are a member of a lot of organizations.
This PR removes these specific keys since they are not used either
client side or server side.
Because Bitwarden does add these in there JWT's i would suggest to keep
the code we had but then commented out as a reference.
Removing it and searching for this when needed would be a waist of time.
Fixes#4156
For some reason still not known, the `.git` directory was not copied
into the container. I think buildkit (buildx) did this by default before, and
stopped this with newer versions.
This PR fixes this by also touching `build.rs` besides `src/main.rs`.
This PR also updates Rust to v1.74.1 and some crates, including the
latest version of Alpine 3.19.
Fixes#4150
* Fix BWDC when re-run with cleared cache
Using the BWDC with a cleared cache caused invited users to be converted
to accepted users.
The problem was a wrong check for the `restore` function.
Fixes#4114
* Remove useless variable
During some refactoring this seems to be overlooked.
This variable gets filled but isn't used at all afterwards.
Fixes#4105
* Check some `.git` paths to force a rebuild
When a checked-out repo switches to a specific tag, and that tag does
not have anything else changed in the files except the tag, it could
happen that the build process doesn't see any changes, while it could be
that the version string needs to be different.
This commit ensures that if some specific paths are changed within the
.git directory, cargo will be triggered to rebuild.
Fixes#4087
* Do not delete dir on file delete
Previously during a `delete_file` check we also tried to delete the
parent directory and ignored all errors, like not being empty for
example.
Since this function is called `delete_file` and does not mention
anything in regards to a directory i have removed that code and it will
now only delete the file and leave the rest as-is.
If this somehow is still needed or wanted, which i do not think we want,
then we should create a new function.
Fixes#4081
* Fix healthcheck when using an ENV file
If someone is using a `.env` file or configured the `ENV_FILE` variable
to use that as it's configuration, this was missed by the healthcheck.
So, `DOMAIN` and `ROCKET_TLS` were not seen, and not used in these cases.
This commit fixes this by checking for this file and if it exists, then
it will load those variables first.
Fixes#4112
* Add missing route
While there was a function and a derive, this endpoint wasn't part of
the routes. Since Bitwarden does have this endpoint ill add the route
instead of deleting it.
Fixes#4076Fixes#4144
* Update crates to update the openssl crate
Because of a bug in the openssl-sys crate we pinned the version to an
older version. This issue has been fixed and was released 2 days ago.
This commit updates the openssl crates including others.
This should also fix the issues with building Vaultwarden using newer
versions of LibreSSL.
Fixes#4051
- Updated Rust to v1.74.0
- Updated all crates (where possible)
- Changed release profile to use
* fat lto
* 1 codegen-unit
This should optimize a bit for speed and a lot for size ~15MB smaller
- Updated Github actions to use caching for the bake process
- Added a schedule to clean the cache every week to prevent stale Debian/Alpine base images
- During the release action, the Alpine/static binaries are added as artifects.
Later we could also automatically add them to the releases maybe.
- Added CODEWONERS to prevent unchecked changes to github actions workflows
When a WebSocket connection was closing it was sending a message after
it was closed already. This generated an error in the logs.
While this error didn't harm any of the functionallity of Vaultwarden it
isn't nice to see them of course.
This PR Fixes this by catching the close message and breaks the loop at
that point. This prevents the `_` catch-all from replying the close
message back to the client, which was causing the error message.
Fixes#4090
2023-12-04 20:20:13 +01:00
145 changed files with 21629 additions and 17351 deletions
about: Use this ONLY for bugs in vaultwarden itself. Use the Discourse forum (link below) to request features or get help with usage/configuration. If in doubt, use the forum.
title: ''
labels: ''
assignees: ''
---
<!--
# ###
NOTE: Please update to the latest version of vaultwarden before reporting an issue!
This saves you and us a lot of time and troubleshooting.
Thanks for taking the time to fill out this bug report!
Please *do not* submit feature requests or ask for help on how to configure Vaultwarden here.
The [GitHub Discussions](https://github.com/dani-garcia/vaultwarden/discussions/) has sections for Questions and Ideas.
Also, make sure you are running [](https://github.com/dani-garcia/vaultwarden/releases/latest) of Vaultwarden!
And search for existing open or closed issues or discussions regarding your topic before posting.
Be sure to check and validate the Vaultwarden Admin Diagnostics (`/admin/diagnostics`) page for any errors!
See here [how to enable the admin page](https://github.com/dani-garcia/vaultwarden/wiki/Enabling-admin-page).
#
- id:support-string
type:textarea
attributes:
label:Vaultwarden Support String
description:Output of the **Generate Support String** from the `/admin/diagnostics` page.
placeholder:|
1. Go to the Vaultwarden Admin of your instance https://example.domain.tld/admin/diagnostics
2. Click on `Generate Support String`
3. Click on `Copy To Clipboard`
4. Replace this text by pasting it into this textarea without any modifications
validations:
required:true
#
- id:version
type:input
attributes:
label:Vaultwarden Build Version
description:What version of Vaultwarden are you running?
placeholder:ex. v1.31.0 or v1.32.0-3466a804
validations:
required:true
#
- id:deployment
type:dropdown
attributes:
label:Deployment method
description:How did you deploy Vaultwarden?
multiple:false
options:
- Official Container Image
- Build from source
- OS Package (apt, yum/dnf, pacman, apk, nix, ...)
- Manually Extracted from Container Image
- Downloaded from GitHub Actions Release Workflow
- Other method
validations:
required:true
#
- id:deployment-other
type:textarea
attributes:
label:Custom deployment method
description:If you deployed Vaultwarden via any other method, please describe how.
#
- id:reverse-proxy
type:input
attributes:
label:Reverse Proxy
description:Are you using a reverse proxy, if so which and what version?
### Alternative implementation of the Bitwarden server API written in Rust and compatible with [upstream Bitwarden clients](https://bitwarden.com/download/)*, perfect for self-hosted deployment where running the official resource-heavy service might not be ideal.
📢 Note: This project was known as Bitwarden_RS and has been renamed to separate itself from the official Bitwarden server in the hopes of avoiding confusion and trademark/branding issues. Please see [#1642](https://github.com/dani-garcia/vaultwarden/discussions/1642) for more explanation.
An alternative server implementation of the Bitwarden Client API, written in Rust and compatible with [official Bitwarden clients](https://bitwarden.com/download/) [[disclaimer](#disclaimer)], perfect for self-hosted deployment where running the official resource-heavy service might not be ideal.
**This project is not associated with the [Bitwarden](https://bitwarden.com/) project nor Bitwarden, Inc.**
> [!IMPORTANT]
> **When using this server, please report any bugs or suggestions directly to us (see [Get in touch](#get-in-touch)), regardless of whatever clients you are using (mobile, desktop, browser...). DO NOT use the official Bitwarden support channels.**
#### ⚠️**IMPORTANT**⚠️: When using this server, please report any bugs or suggestions to us directly (look at the bottom of this page for ways to get in touch), regardless of whatever clients you are using (mobile, desktop, browser...). DO NOT use the official support channels.
---
<br>
## Features
Basically full implementation of Bitwarden API is provided including:
A nearly complete implementation of the Bitwarden Client API is provided, including:
This will preserve any persistent data under /vw-data/, you can adapt the path to whatever suits you.
**IMPORTANT**: Most modern web browsers disallow the use of Web Crypto APIs in insecure contexts. In this case, you might get an error like `Cannot read property 'importKey'`. To solve this problem, you need to access the web vault via HTTPS or localhost.
This can be configured in [vaultwarden directly](https://github.com/dani-garcia/vaultwarden/wiki/Enabling-HTTPS) or using a third-party reverse proxy ([some examples](https://github.com/dani-garcia/vaultwarden/wiki/Proxy-examples)).
If you have an available domain name, you can get HTTPS certificates with [Let's Encrypt](https://letsencrypt.org/), or you can generate self-signed certificates with utilities like [mkcert](https://github.com/FiloSottile/mkcert). Some proxies automatically do this step, like Caddy (see examples linked above).
<br>
## Usage
See the [vaultwarden wiki](https://github.com/dani-garcia/vaultwarden/wiki) for more information on how to configure and run the vaultwarden server.
> [!IMPORTANT]
> Most modern web browsers disallow the use of Web Crypto APIs in insecure contexts. In this case, you might get an error like `Cannot read property 'importKey'`. To solve this problem, you need to access the web vault via HTTPS or localhost.
>
>This can be configured in [Vaultwarden directly](https://github.com/dani-garcia/vaultwarden/wiki/Enabling-HTTPS) or using a third-party reverse proxy ([some examples](https://github.com/dani-garcia/vaultwarden/wiki/Proxy-examples)).
>
>If you have an available domain name, you can get HTTPS certificates with [Let's Encrypt](https://letsencrypt.org/), or you can generate self-signed certificates with utilities like [mkcert](https://github.com/FiloSottile/mkcert). Some proxies automatically do this step, like Caddy or Traefik (see examples linked above).
> [!TIP]
>**For more detailed examples on how to install, use and configure Vaultwarden you can check our [Wiki](https://github.com/dani-garcia/vaultwarden/wiki).**
The main way to use Vaultwarden is via our container images which are published to [ghcr.io](https://github.com/dani-garcia/vaultwarden/pkgs/container/vaultwarden), [docker.io](https://hub.docker.com/r/vaultwarden/server) and [quay.io](https://quay.io/repository/vaultwarden/server).
There are also [community driven packages](https://github.com/dani-garcia/vaultwarden/wiki/Third-party-packages) which can be used, but those might be lagging behind the latest version or might deviate in the way Vaultwarden is configured, as described in our [Wiki](https://github.com/dani-garcia/vaultwarden/wiki).
### Docker/Podman CLI
Pull the container image and mount a volume from the host for persistent storage.<br>
You can replace `docker` with `podman` if you prefer to use podman.
```shell
docker pull vaultwarden/server:latest
docker run --detach --name vaultwarden \
--env DOMAIN="https://vw.domain.tld"\
--volume /vw-data/:/data/ \
--restart unless-stopped \
--publish 80:80 \
vaultwarden/server:latest
```
This will preserve any persistent data under `/vw-data/`, you can adapt the path to whatever suits you.
### Docker Compose
To use Docker compose you need to create a `compose.yaml` which will hold the configuration to run the Vaultwarden container.
```yaml
services:
vaultwarden:
image:vaultwarden/server:latest
container_name:vaultwarden
restart:unless-stopped
environment:
DOMAIN:"https://vw.domain.tld"
volumes:
- ./vw-data/:/data/
ports:
- 80:80
```
<br>
## Get in touch
To ask a question, offer suggestions or new features or to get help configuring or installing the software, please use [GitHub Discussions](https://github.com/dani-garcia/vaultwarden/discussions) or [the forum](https://vaultwarden.discourse.group/).
If you spot any bugs or crashes with vaultwarden itself, please [create an issue](https://github.com/dani-garcia/vaultwarden/issues/). Make sure you are on the latest version and there aren't any similar issues open, though!
Have a question, suggestion or need help? Join our community on [Matrix](https://matrix.to/#/#vaultwarden:matrix.org), [GitHub Discussions](https://github.com/dani-garcia/vaultwarden/discussions) or [Discourse Forums](https://vaultwarden.discourse.group/).
If you prefer to chat, we're usually hanging around at [#vaultwarden:matrix.org](https://matrix.to/#/#vaultwarden:matrix.org) room on Matrix. Feel free to join us!
Encountered a bug or crash? Please search our issue tracker and discussions to see if it's already been reported. If not, please [start a new discussion](https://github.com/dani-garcia/vaultwarden/discussions) or [create a new issue](https://github.com/dani-garcia/vaultwarden/issues/). Ensure you're using the latest version of Vaultwarden and there aren't any similar issues open or closed!
**This project is not associated with [Bitwarden](https://bitwarden.com/) or Bitwarden, Inc.**
However, one of the active maintainers for Vaultwarden is employed by Bitwarden and is allowed to contribute to the project on their own time. These contributions are independent of Bitwarden and are reviewed by other maintainers.
The maintainers work together to set the direction for the project, focusing on serving the self-hosting community, including individuals, families, and small organizations, while ensuring the project's sustainability.
**Please note:** We cannot be held liable for any data loss that may occur while using Vaultwarden. This includes passwords, attachments, and other information handled by the application. We highly recommend performing regular backups of your files and database. However, should you experience data loss, we encourage you to contact us immediately.
<br>
## Bitwarden_RS
This project was known as Bitwarden_RS and has been renamed to separate itself from the official Bitwarden server in the hopes of avoiding confusion and trademark/branding issues.<br>
Please see [#1642 - v1.21.0 release and project rename to Vaultwarden](https://github.com/dani-garcia/vaultwarden/discussions/1642) for more explanation.
@@ -21,7 +21,7 @@ notify us. We welcome working with you to resolve the issue promptly. Thanks in
The following bug classes are out-of scope:
- Bugs that are already reported on Vaultwarden's issue tracker (https://github.com/dani-garcia/vaultwarden/issues)
- Bugs that are not part of Vaultwarden, like on the the web-vault or mobile and desktop clients. These issues need to be reported in the respective project issue tracker at https://github.com/bitwarden to which we are not associated
- Bugs that are not part of Vaultwarden, like on the web-vault or mobile and desktop clients. These issues need to be reported in the respective project issue tracker at https://github.com/bitwarden to which we are not associated
- Issues in an upstream software dependency (ex: Rust, or External Libraries) which are already reported to the upstream maintainer
- Attacks requiring physical access to a user's device
- Issues related to software or protocols not under Vaultwarden's control
@@ -39,7 +39,11 @@ Thank you for helping keep Vaultwarden and our users safe!
# How to contact us
- You can contact us on Matrix https://matrix.to/#/#vaultwarden:matrix.org (user: `@danig:matrix.org`)
- You can send an  to report a security issue.
- If you want to send an encrypted email you can use the following GPG key:<br>
@@ -11,6 +11,11 @@ With just these two files we can build both Debian and Alpine images for the fol
- armv7 (linux/arm/v7)
- armv6 (linux/arm/v6)
Some unsupported platforms for Debian based images. These are not built and tested by default and are only provided to make it easier for users to build for these architectures.
- 386 (linux/386)
- ppc64le (linux/ppc64le)
- s390x (linux/s390x)
To build these containers you need to enable QEMU binfmt support to be able to run/emulate architectures which are different then your host.<br>
This ensures the container build process can run binaries from other architectures.<br>
@@ -41,7 +46,7 @@ There also is an option to use an other docker container to provide support for
```bash
# To install and activate
docker run --privileged --rm tonistiigi/binfmt --install arm64,arm
# To unistall
# To uninstall
docker run --privileged --rm tonistiigi/binfmt --uninstall 'qemu-*'
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Helmut K. C. Tessarek