Fix --version from failing without config (#5055)

* Fix `--version` from failing without config

Since we added the option to show the web-vault version also when running `--version` this causes the config to always be validated.
While this is not very bad in general, it could cause the command to quit during the config validation, and not show the version, but also errors.
This is probably not very useful for this specific command, unlike the `--backup` for example.

To fix this, and preventing the config from being validated, i added an AtomicBool to check if we need to validate the config on first load.
This prevents errors, and will just show the Vaultwarden version, and if possible the web-vault version too.

Fixes #5046

Signed-off-by: BlackDex <black.dex@gmail.com>

* Adjusted the code bsaed upon review

Signed-off-by: BlackDex <black.dex@gmail.com>

---------

Signed-off-by: BlackDex <black.dex@gmail.com>

.dockerignore

@@ -1,40 +1,15 @@
-# Local build artifacts
-target
+// Ignore everything
+*
 
-# Data folder
-data
-
-# Misc
-.env
-.env.template
-.gitattributes
-.gitignore
-rustfmt.toml
-
-# IDE files
-.vscode
-.idea
-.editorconfig
-*.iml
-
-# Documentation
-.github
-*.md
-*.txt
-*.yml
-*.yaml
-
-# Docker
-hooks
-tools
-Dockerfile
-.dockerignore
-docker/**
+// Allow what is needed
+!.git
 !docker/healthcheck.sh
 !docker/start.sh
+!migrations
+!src
 
-# Web vault
-web-vault
-
-# Vaultwarden Resources
-resources
+!build.rs
+!Cargo.lock
+!Cargo.toml
+!rustfmt.toml
+!rust-toolchain.toml

.env.template

@@ -84,27 +84,28 @@
 ### WebSocket ###
 #################
 
-## Enables websocket notifications
-# WEBSOCKET_ENABLED=false
-
-## Controls the WebSocket server address and port
-# WEBSOCKET_ADDRESS=0.0.0.0
-# WEBSOCKET_PORT=3012
+## Enable websocket notifications
+# ENABLE_WEBSOCKET=true
 
 ##########################
 ### Push notifications ###
 ##########################
 
 ## Enables push notifications (requires key and id from https://bitwarden.com/host)
-## If you choose "European Union" Data Region, uncomment PUSH_RELAY_URI and PUSH_IDENTITY_URI then replace .com by .eu
 ## Details about mobile client push notification:
 ## - https://github.com/dani-garcia/vaultwarden/wiki/Enabling-Mobile-Client-push-notification
 # PUSH_ENABLED=false
 # PUSH_INSTALLATION_ID=CHANGEME
 # PUSH_INSTALLATION_KEY=CHANGEME
-## Don't change this unless you know what you're doing.
+
+# WARNING: Do not modify the following settings unless you fully understand their implications!
+# Default Push Relay and Identity URIs
 # PUSH_RELAY_URI=https://push.bitwarden.com
 # PUSH_IDENTITY_URI=https://identity.bitwarden.com
+# European Union Data Region Settings
+# If you have selected "European Union" as your data region, use the following URIs instead.
+# PUSH_RELAY_URI=https://api.bitwarden.eu
+# PUSH_IDENTITY_URI=https://identity.bitwarden.eu
 
 #####################
 ### Schedule jobs ###
@@ -156,6 +157,10 @@
 ## Cron schedule of the job that cleans old auth requests from the auth request.
 ## Defaults to every minute. Set blank to disable this job.
 # AUTH_REQUEST_PURGE_SCHEDULE="30 * * * * *"
+##
+## Cron schedule of the job that cleans expired Duo contexts from the database. Does nothing if Duo MFA is disabled or set to use the legacy iframe prompt.
+## Defaults to every minute. Set blank to disable this job.
+# DUO_CONTEXT_PURGE_SCHEDULE="30 * * * * *"
 
 ########################
 ### General settings ###
@@ -324,15 +329,15 @@
 ## The default is 10 seconds, but this could be to low on slower network connections
 # ICON_DOWNLOAD_TIMEOUT=10
 
-## Icon blacklist Regex
-## Any domains or IPs that match this regex won't be fetched by the icon service.
+## Block HTTP domains/IPs by Regex
+## Any domains or IPs that match this regex won't be fetched by the internal HTTP client.
 ## Useful to hide other servers in the local network. Check the WIKI for more details
 ## NOTE: Always enclose this regex withing single quotes!
-# ICON_BLACKLIST_REGEX='^(192\.168\.0\.[0-9]+|192\.168\.1\.[0-9]+)$'
+# HTTP_REQUEST_BLOCK_REGEX='^(192\.168\.0\.[0-9]+|192\.168\.1\.[0-9]+)$'
 
-## Any IP which is not defined as a global IP will be blacklisted.
+## Enabling this will cause the internal HTTP client to refuse to connect to any non global IP address.
 ## Useful to secure your internal environment: See https://en.wikipedia.org/wiki/Reserved_IP_addresses for a list of IPs which it will block
-# ICON_BLACKLIST_NON_GLOBAL_IPS=true
+# HTTP_REQUEST_BLOCK_NON_GLOBAL_IPS=true
 
 ## Client Settings
 ## Enable experimental feature flags for clients.
@@ -366,8 +371,9 @@
 ## Log level
 ## Change the verbosity of the log output
 ## Valid values are "trace", "debug", "info", "warn", "error" and "off"
-## Setting it to "trace" or "debug" would also show logs for mounted
-## routes and static file, websocket and alive requests
+## Setting it to "trace" or "debug" would also show logs for mounted routes and static file, websocket and alive requests
+## For a specific module append a comma separated `path::to::module=log_level`
+## For example, to only see debug logs for icons use: LOG_LEVEL="info,vaultwarden::api::icons=debug"
 # LOG_LEVEL=info
 
 ## Token for the admin interface, preferably an Argon2 PCH string
@@ -413,6 +419,18 @@
 ## KNOW WHAT YOU ARE DOING!
 # ORG_GROUPS_ENABLED=false
 
+## Increase secure note size limit (Know the risks!)
+## Sets the secure note size limit to 100_000 instead of the default 10_000.
+## WARNING: This could cause issues with clients. Also exports will not work on Bitwarden servers!
+## KNOW WHAT YOU ARE DOING!
+# INCREASE_NOTE_SIZE_LIMIT=false
+
+## Enforce Single Org with Reset Password Policy
+## Enforce that the Single Org policy is enabled before setting the Reset Password policy
+## Bitwarden enforces this by default. In Vaultwarden we encouraged to use multiple organizations because groups were not available.
+## Setting this to true will enforce the Single Org Policy to be enabled before you can enable the Reset Password policy.
+# ENFORCE_SINGLE_ORG_WITH_RESET_PW_POLICY=false
+
 ########################
 ### MFA/2FA settings ###
 ########################
@@ -426,15 +444,21 @@
 # YUBICO_SERVER=http://yourdomain.com/wsapi/2.0/verify
 
 ## Duo Settings
-## You need to configure all options to enable global Duo support, otherwise users would need to configure it themselves
+## You need to configure the DUO_IKEY, DUO_SKEY, and DUO_HOST options to enable global Duo support.
+## Otherwise users will need to configure it themselves.
 ## Create an account and protect an application as mentioned in this link (only the first step, not the rest):
 ## https://help.bitwarden.com/article/setup-two-step-login-duo/#create-a-duo-security-account
 ## Then set the following options, based on the values obtained from the last step:
-# DUO_IKEY=<Integration Key>
-# DUO_SKEY=<Secret Key>
+# DUO_IKEY=<Client ID>
+# DUO_SKEY=<Client Secret>
 # DUO_HOST=<API Hostname>
 ## After that, you should be able to follow the rest of the guide linked above,
 ## ignoring the fields that ask for the values that you already configured beforehand.
+##
+## If you want to attempt to use Duo's 'Traditional Prompt' (deprecated, iframe based) set DUO_USE_IFRAME to 'true'.
+## Duo no longer supports this, but it still works for some integrations.
+## If you aren't sure, leave this alone.
+# DUO_USE_IFRAME=false
 
 ## Email 2FA settings
 ## Email token size
@@ -448,6 +472,11 @@
 ##
 ## Maximum attempts before an email token is reset and a new email will need to be sent.
 # EMAIL_ATTEMPTS_LIMIT=3
+##
+## Setup email 2FA regardless of any organization policy
+# EMAIL_2FA_ENFORCE_ON_VERIFIED_INVITE=false
+## Automatically setup email 2FA as fallback provider when needed
+# EMAIL_2FA_AUTO_FALLBACK=false
 
 ## Other MFA/2FA settings
 ## Disable 2FA remember
@@ -477,12 +506,19 @@
 # SMTP_HOST=smtp.domain.tld
 # SMTP_FROM=vaultwarden@domain.tld
 # SMTP_FROM_NAME=Vaultwarden
-# SMTP_SECURITY=starttls # ("starttls", "force_tls", "off") Enable a secure connection. Default is "starttls" (Explicit - ports 587 or 25), "force_tls" (Implicit - port 465) or "off", no encryption (port 25)
-# SMTP_PORT=587          # Ports 587 (submission) and 25 (smtp) are standard without encryption and with encryption via STARTTLS (Explicit TLS). Port 465 (submissions) is used for encrypted submission (Implicit TLS).
 # SMTP_USERNAME=username
 # SMTP_PASSWORD=password
 # SMTP_TIMEOUT=15
 
+## Choose the type of secure connection for SMTP. The default is "starttls".
+## The available options are:
+## - "starttls": The default port is 587.
+## - "force_tls": The default port is 465.
+## - "off": The default port is 25.
+## Ports 587 (submission) and 25 (smtp) are standard without encryption and with encryption via STARTTLS (Explicit TLS). Port 465 (submissions) is used for encrypted submission (Implicit TLS).
+# SMTP_SECURITY=starttls
+# SMTP_PORT=587
+
 # Whether to send mail via the `sendmail` command
 # USE_SENDMAIL=false
 # Which sendmail command to use. The one found in the $PATH is used if not specified.
@@ -517,14 +553,15 @@
 ## Only use this as a last resort if you are not able to use a valid certificate.
 # SMTP_ACCEPT_INVALID_HOSTNAMES=false
 
-##########################
+#######################
 ### Rocket settings ###
-##########################
+#######################
 
 ## Rocket specific settings
 ## See https://rocket.rs/v0.5/guide/configuration/ for more details.
 # ROCKET_ADDRESS=0.0.0.0
-# ROCKET_PORT=80  # Defaults to 80 in the Docker images, or 8000 otherwise.
+## The default port is 8000, unless running in a Docker container, in which case it is 80.
+# ROCKET_PORT=8000
 # ROCKET_TLS={certs="/path/to/certs.pem",key="/path/to/key.pem"}
 
 

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,66 +0,0 @@
----
-name: Bug report
-about: Use this ONLY for bugs in vaultwarden itself. Use the Discourse forum (link below) to request features or get help with usage/configuration. If in doubt, use the forum.
-title: ''
-labels: ''
-assignees: ''
-
----
-<!--
-    # ###
-    NOTE: Please update to the latest version of vaultwarden before reporting an issue!
-    This saves you and us a lot of time and troubleshooting.
-    See:
-    * https://github.com/dani-garcia/vaultwarden/issues/1180
-    * https://github.com/dani-garcia/vaultwarden/wiki/Updating-the-vaultwarden-image
-    # ###
--->
-
-<!--
-Please fill out the following template to make solving your problem easier and faster for us.
-This is only a guideline. If you think that parts are unnecessary for your issue, feel free to remove them.
-
-Remember to hide/redact personal or confidential information,
-such as passwords, IP addresses, and DNS names as appropriate.
--->
-
-### Subject of the issue
-<!-- Describe your issue here. -->
-
-### Deployment environment
-
-<!--
-    =========================================================================================
-    Preferably, use the `Generate Support String` button on the admin page's Diagnostics tab.
-    That will auto-generate most of the info requested in this section.
-    =========================================================================================
--->
-
-<!-- The version number, obtained from the logs (at startup) or the admin diagnostics page -->
-<!-- This is NOT the version number shown on the web vault, which is versioned separately from vaultwarden -->
-<!-- Remember to check if your issue exists on the latest version first! -->
-* vaultwarden version:
-
-<!-- How the server was installed: Docker image, OS package, built from source, etc. -->
-* Install method:
-
-* Clients used: <!-- web vault, desktop, Android, iOS, etc. (if applicable) -->
-
-* Reverse proxy and version: <!-- if applicable -->
-
-* MySQL/MariaDB or PostgreSQL version: <!-- if applicable -->
-
-* Other relevant details:
-
-### Steps to reproduce
-<!-- Tell us how to reproduce this issue. What parameters did you set (differently from the defaults)
-and how did you start vaultwarden? -->
-
-### Expected behaviour
-<!-- Tell us what you expected to happen -->
-
-### Actual behaviour
-<!-- Tell us what actually happened -->
-
-### Troubleshooting data
-<!-- Share any log files, screenshots, or other relevant troubleshooting data -->

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,167 @@
+name: Bug Report
+description: File a bug report
+labels: ["bug"]
+body:
+  #
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for taking the time to fill out this bug report!
+
+        Please *do not* submit feature requests or ask for help on how to configure Vaultwarden here.
+
+        The [GitHub Discussions](https://github.com/dani-garcia/vaultwarden/discussions/) has sections for Questions and Ideas.
+
+        Also, make sure you are running [![GitHub Release](https://img.shields.io/github/release/dani-garcia/vaultwarden.svg)](https://github.com/dani-garcia/vaultwarden/releases/latest) of Vaultwarden!
+        And search for existing open or closed issues or discussions regarding your topic before posting.
+
+        Be sure to check and validate the Vaultwarden Admin Diagnostics (`/admin/diagnostics`) page for any errors!
+        See here [how to enable the admin page](https://github.com/dani-garcia/vaultwarden/wiki/Enabling-admin-page).
+  #
+  - id: support-string
+    type: textarea
+    attributes:
+      label: Vaultwarden Support String
+      description: Output of the **Generate Support String** from the `/admin/diagnostics` page.
+      placeholder: |
+        1. Go to the Vaultwarden Admin of your instance https://example.domain.tld/admin/diagnostics
+        2. Click on `Generate Support String`
+        3. Click on `Copy To Clipboard`
+        4. Replace this text by pasting it into this textarea without any modifications
+    validations:
+      required: true
+  #
+  - id: version
+    type: input
+    attributes:
+      label: Vaultwarden Build Version
+      description: What version of Vaultwarden are you running?
+      placeholder: ex. v1.31.0 or v1.32.0-3466a804
+    validations:
+      required: true
+  #
+  - id: deployment
+    type: dropdown
+    attributes:
+      label: Deployment method
+      description: How did you deploy Vaultwarden?
+      multiple: false
+      options:
+        - Official Container Image
+        - Build from source
+        - OS Package (apt, yum/dnf, pacman, apk, nix, ...)
+        - Manually Extracted from Container Image
+        - Downloaded from GitHub Actions Release Workflow
+        - Other method
+    validations:
+      required: true
+  #
+  - id: deployment-other
+    type: textarea
+    attributes:
+      label: Custom deployment method
+      description: If you deployed Vaultwarden via any other method, please describe how.
+  #
+  - id: reverse-proxy
+    type: input
+    attributes:
+      label: Reverse Proxy
+      description: Are you using a reverse proxy, if so which and what version?
+      placeholder: ex. nginx 1.26.2, caddy 2.8.4, traefik 3.1.2, haproxy 3.0
+    validations:
+      required: true
+  #
+  - id: os
+    type: dropdown
+    attributes:
+      label: Host/Server Operating System
+      description: On what operating system are you running the Vaultwarden server?
+      multiple: false
+      options:
+        - Linux
+        - NAS/SAN
+        - Cloud
+        - Windows
+        - macOS
+        - Other
+    validations:
+      required: true
+  #
+  - id: os-version
+    type: input
+    attributes:
+      label: Operating System Version
+      description: What version of the operating system(s) are you seeing the problem on?
+      placeholder: ex. Arch Linux, Ubuntu 24.04, Kubernetes, Synology DSM 7.x, Windows 11
+  #
+  - id: clients
+    type: dropdown
+    attributes:
+      label: Clients
+      description: What client(s) are you seeing the problem on?
+      multiple: true
+      options:
+        - Web Vault
+        - Browser Extension
+        - CLI
+        - Desktop
+        - Android
+        - iOS
+    validations:
+      required: true
+  #
+  - id: client-version
+    type: input
+    attributes:
+      label: Client Version
+      description: What version(s) of the client(s) are you seeing the problem on?
+      placeholder: ex. CLI v2024.7.2, Firefox 130 - v2024.7.0
+  #
+  - id: reproduce
+    type: textarea
+    attributes:
+      label: Steps To Reproduce
+      description: How can we reproduce the behavior.
+      value: |
+        1. Go to '...'
+        2. Click on '....'
+        3. Scroll down to '....'
+        4. Click on '...'
+        5. Etc '...'
+    validations:
+      required: true
+  #
+  - id: expected
+    type: textarea
+    attributes:
+      label: Expected Result
+      description: A clear and concise description of what you expected to happen.
+    validations:
+      required: true
+  #
+  - id: actual
+    type: textarea
+    attributes:
+      label: Actual Result
+      description: A clear and concise description of what is happening.
+    validations:
+      required: true
+  #
+  - id: logs
+    type: textarea
+    attributes:
+      label: Logs
+      description: Provide the logs generated by Vaultwarden during the time this issue occurs.
+      render: text
+  #
+  - id: screenshots
+    type: textarea
+    attributes:
+      label: Screenshots or Videos
+      description: If applicable, add screenshots and/or a short video to help explain your problem.
+  #
+  - id: additional-context
+    type: textarea
+    attributes:
+      label: Additional Context
+      description: Add any other context about the problem here.

.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +1,8 @@
 blank_issues_enabled: false
 contact_links:
-  - name: Discourse forum for vaultwarden
-    url: https://vaultwarden.discourse.group/
-    about: Use this forum to request features or get help with usage/configuration.
-  - name: GitHub Discussions for vaultwarden
+  - name: GitHub Discussions for Vaultwarden
     url: https://github.com/dani-garcia/vaultwarden/discussions
-    about: An alternative to the Discourse forum, if this is easier for you.
+    about: Use the discussions to request features or get help with usage/configuration.
+  - name: Discourse forum for Vaultwarden
+    url: https://vaultwarden.discourse.group/
+    about: An alternative to the GitHub Discussions, if this is easier for you.

.github/workflows/build.yml

@@ -28,6 +28,7 @@ on:
 
 jobs:
   build:
+    # We use Ubuntu 22.04 here because this matches the library versions used within the Debian docker containers
     runs-on: ubuntu-22.04
     timeout-minutes: 120
     # Make warnings errors, this is to prevent warnings slipping through.
@@ -46,7 +47,7 @@ jobs:
     steps:
       # Checkout the repo
       - name: "Checkout"
-        uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 #v4.1.1
+        uses: actions/checkout@eef61447b9ff4aafe5dcd4e0bbf5d482be7e7871 #v4.2.1
       # End Checkout the repo
 
 
@@ -74,7 +75,7 @@ jobs:
 
       # Only install the clippy and rustfmt components on the default rust-toolchain
       - name: "Install rust-toolchain version"
-        uses: dtolnay/rust-toolchain@be73d7920c329f220ce78e0234b8f96b7ae60248 # master @ 2023-12-07 - 10:22 PM GMT+1
+        uses: dtolnay/rust-toolchain@7b1c307e0dcbda6122208f10795a713336a9b35a # master @ Aug 8, 2024, 7:36 PM GMT+2
         if: ${{ matrix.channel == 'rust-toolchain' }}
         with:
           toolchain: "${{steps.toolchain.outputs.RUST_TOOLCHAIN}}"
@@ -84,7 +85,7 @@ jobs:
 
       # Install the any other channel to be used for which we do not execute clippy and rustfmt
       - name: "Install MSRV version"
-        uses: dtolnay/rust-toolchain@be73d7920c329f220ce78e0234b8f96b7ae60248 # master @ 2023-12-07 - 10:22 PM GMT+1
+        uses: dtolnay/rust-toolchain@7b1c307e0dcbda6122208f10795a713336a9b35a # master @ Aug 8, 2024, 7:36 PM GMT+2
         if: ${{ matrix.channel != 'rust-toolchain' }}
         with:
           toolchain: "${{steps.toolchain.outputs.RUST_TOOLCHAIN}}"

.github/workflows/hadolint.yml

@@ -8,14 +8,26 @@ on: [
 jobs:
   hadolint:
     name: Validate Dockerfile syntax
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     timeout-minutes: 30
     steps:
       # Checkout the repo
       - name: Checkout
-        uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
+        uses: actions/checkout@eef61447b9ff4aafe5dcd4e0bbf5d482be7e7871 #v4.2.1
       # End Checkout the repo
 
+      # Start Docker Buildx
+      - name: Setup Docker Buildx
+        uses: docker/setup-buildx-action@c47758b77c9736f4b2ef4073d4d51994fabfe349 # v3.7.1
+        # https://github.com/moby/buildkit/issues/3969
+        # Also set max parallelism to 2, the default of 4 breaks GitHub Actions and causes OOMKills
+        with:
+          buildkitd-config-inline: |
+            [worker.oci]
+              max-parallelism = 2
+          driver-opts: |
+            network=host
+
       # Download hadolint - https://github.com/hadolint/hadolint/releases
       - name: Download hadolint
         shell: bash
@@ -26,8 +38,18 @@ jobs:
           HADOLINT_VERSION: 2.12.0
       # End Download hadolint
 
-      # Test Dockerfiles
+      # Test Dockerfiles with hadolint
       - name: Run hadolint
         shell: bash
         run: hadolint docker/Dockerfile.{debian,alpine}
-      # End Test Dockerfiles
+      # End Test Dockerfiles with hadolint
+
+      # Test Dockerfiles with docker build checks
+      - name: Run docker build check
+        shell: bash
+        run: |
+          echo "Checking docker/Dockerfile.debian"
+          docker build --check . -f docker/Dockerfile.debian
+          echo "Checking docker/Dockerfile.alpine"
+          docker build --check . -f docker/Dockerfile.alpine
+      # End Test Dockerfiles with docker build checks

.github/workflows/release.yml

@@ -2,20 +2,10 @@ name: Release
 
 on:
   push:
-    paths:
-      - ".github/workflows/release.yml"
-      - "src/**"
-      - "migrations/**"
-      - "docker/**"
-      - "Cargo.*"
-      - "build.rs"
-      - "diesel.toml"
-      - "rust-toolchain.toml"
-
-    branches: # Only on paths above
+    branches:
       - main
 
-    tags: # Always, regardless of paths above
+    tags:
       - '*'
 
 jobs:
@@ -23,7 +13,7 @@ jobs:
   # Some checks to determine if we need to continue with building a new docker.
   # We will skip this check if we are creating a tag, because that has the same hash as a previous run already.
   skip_check:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     if: ${{ github.repository == 'dani-garcia/vaultwarden' }}
     outputs:
       should_skip: ${{ steps.skip_check.outputs.should_skip }}
@@ -37,7 +27,7 @@ jobs:
         if: ${{ github.ref_type == 'branch' }}
 
   docker-build:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     timeout-minutes: 120
     needs: skip_check
     if: ${{ needs.skip_check.outputs.should_skip != 'true' && github.repository == 'dani-garcia/vaultwarden' }}
@@ -68,22 +58,22 @@ jobs:
     steps:
       # Checkout the repo
       - name: Checkout
-        uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
+        uses: actions/checkout@eef61447b9ff4aafe5dcd4e0bbf5d482be7e7871 #v4.2.1
         with:
           fetch-depth: 0
 
       - name: Initialize QEMU binfmt support
-        uses: docker/setup-qemu-action@68827325e0b33c7199eb31dd4e31fbe9023e06e3 # v3.0.0
+        uses: docker/setup-qemu-action@49b3bc8e6bdd4a60e6116a5414239cba5943d3cf # v3.2.0
         with:
           platforms: "arm64,arm"
 
       # Start Docker Buildx
       - name: Setup Docker Buildx
-        uses: docker/setup-buildx-action@f95db51fddba0c2d1ec667646a06c2ce06100226 # v3.0.0
+        uses: docker/setup-buildx-action@c47758b77c9736f4b2ef4073d4d51994fabfe349 # v3.7.1
         # https://github.com/moby/buildkit/issues/3969
-        # Also set max parallelism to 2, the default of 4 breaks GitHub Actions
+        # Also set max parallelism to 2, the default of 4 breaks GitHub Actions and causes OOMKills
         with:
-          config-inline: |
+          buildkitd-config-inline: |
             [worker.oci]
               max-parallelism = 2
           driver-opts: |
@@ -112,7 +102,7 @@ jobs:
 
       # Login to Docker Hub
       - name: Login to Docker Hub
-        uses: docker/login-action@343f7c4344506bcbf9b4de18042ae17996df046d # v3.0.0
+        uses: docker/login-action@9780b0c442fbb1117ed29e0efdff1e18412f7567 # v3.3.0
         with:
           username: ${{ secrets.DOCKERHUB_USERNAME }}
           password: ${{ secrets.DOCKERHUB_TOKEN }}
@@ -126,7 +116,7 @@ jobs:
 
       # Login to GitHub Container Registry
       - name: Login to GitHub Container Registry
-        uses: docker/login-action@343f7c4344506bcbf9b4de18042ae17996df046d # v3.0.0
+        uses: docker/login-action@9780b0c442fbb1117ed29e0efdff1e18412f7567 # v3.3.0
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
@@ -139,15 +129,9 @@ jobs:
         run: |
           echo "CONTAINER_REGISTRIES=${CONTAINER_REGISTRIES:+${CONTAINER_REGISTRIES},}${{ vars.GHCR_REPO }}" | tee -a "${GITHUB_ENV}"
 
-      - name: Add registry for ghcr.io
-        if: ${{ env.HAVE_GHCR_LOGIN == 'true' }}
-        shell: bash
-        run: |
-          echo "CONTAINER_REGISTRIES=${CONTAINER_REGISTRIES:+${CONTAINER_REGISTRIES},}${{ vars.GHCR_REPO }}" | tee -a "${GITHUB_ENV}"
-
       # Login to Quay.io
       - name: Login to Quay.io
-        uses: docker/login-action@343f7c4344506bcbf9b4de18042ae17996df046d # v3.0.0
+        uses: docker/login-action@9780b0c442fbb1117ed29e0efdff1e18412f7567 # v3.3.0
         with:
           registry: quay.io
           username: ${{ secrets.QUAY_USERNAME }}
@@ -167,7 +151,7 @@ jobs:
           # Check if there is a GitHub Container Registry Login and use it for caching
           if [[ -n "${HAVE_GHCR_LOGIN}" ]]; then
             echo "BAKE_CACHE_FROM=type=registry,ref=${{ vars.GHCR_REPO }}-buildcache:${{ matrix.base_image }}" | tee -a "${GITHUB_ENV}"
-            echo "BAKE_CACHE_TO=type=registry,ref=${{ vars.GHCR_REPO }}-buildcache:${{ matrix.base_image }},mode=max" | tee -a "${GITHUB_ENV}"
+            echo "BAKE_CACHE_TO=type=registry,ref=${{ vars.GHCR_REPO }}-buildcache:${{ matrix.base_image }},compression=zstd,mode=max" | tee -a "${GITHUB_ENV}"
           else
             echo "BAKE_CACHE_FROM="
             echo "BAKE_CACHE_TO="
@@ -181,7 +165,7 @@ jobs:
           echo "CONTAINER_REGISTRIES=${CONTAINER_REGISTRIES:+${CONTAINER_REGISTRIES},}localhost:5000/vaultwarden/server" | tee -a "${GITHUB_ENV}"
 
       - name: Bake ${{ matrix.base_image }} containers
-        uses: docker/bake-action@849707117b03d39aba7924c50a10376a69e88d7d # v4.1.0
+        uses: docker/bake-action@2e3d19baedb14545e5d41222653874f25d5b4dfb # v5.10.0
         env:
           BASE_TAGS: "${{ env.BASE_TAGS }}"
           SOURCE_COMMIT: "${{ env.SOURCE_COMMIT }}"
@@ -214,53 +198,53 @@ jobs:
           # This is needed because using different platforms doesn't trigger a new pull/download
 
           # Extract amd64 binary
-          docker create --name amd64 --platform=linux/amd64 "vaultwarden/server:${EXTRACT_TAG}-alpine"
+          docker create --name amd64 --platform=linux/amd64 "localhost:5000/vaultwarden/server:${EXTRACT_TAG}-alpine"
           docker cp amd64:/vaultwarden vaultwarden-amd64
           docker rm --force amd64
-          docker rmi --force "vaultwarden/server:${EXTRACT_TAG}-alpine"
+          docker rmi --force "localhost:5000/vaultwarden/server:${EXTRACT_TAG}-alpine"
 
           # Extract arm64 binary
-          docker create --name arm64 --platform=linux/arm64 "vaultwarden/server:${EXTRACT_TAG}-alpine"
+          docker create --name arm64 --platform=linux/arm64 "localhost:5000/vaultwarden/server:${EXTRACT_TAG}-alpine"
           docker cp arm64:/vaultwarden vaultwarden-arm64
           docker rm --force arm64
-          docker rmi --force "vaultwarden/server:${EXTRACT_TAG}-alpine"
+          docker rmi --force "localhost:5000/vaultwarden/server:${EXTRACT_TAG}-alpine"
 
           # Extract armv7 binary
-          docker create --name armv7 --platform=linux/arm/v7 "vaultwarden/server:${EXTRACT_TAG}-alpine"
+          docker create --name armv7 --platform=linux/arm/v7 "localhost:5000/vaultwarden/server:${EXTRACT_TAG}-alpine"
           docker cp armv7:/vaultwarden vaultwarden-armv7
           docker rm --force armv7
-          docker rmi --force "vaultwarden/server:${EXTRACT_TAG}-alpine"
+          docker rmi --force "localhost:5000/vaultwarden/server:${EXTRACT_TAG}-alpine"
 
           # Extract armv6 binary
-          docker create --name armv6 --platform=linux/arm/v6 "vaultwarden/server:${EXTRACT_TAG}-alpine"
+          docker create --name armv6 --platform=linux/arm/v6 "localhost:5000/vaultwarden/server:${EXTRACT_TAG}-alpine"
           docker cp armv6:/vaultwarden vaultwarden-armv6
           docker rm --force armv6
-          docker rmi --force "vaultwarden/server:${EXTRACT_TAG}-alpine"
+          docker rmi --force "localhost:5000/vaultwarden/server:${EXTRACT_TAG}-alpine"
 
       # Upload artifacts to Github Actions
       - name: "Upload amd64 artifact"
-        uses: actions/upload-artifact@a8a3f3ad30e3422c9c7b888a15615d19a852ae32 # v3.1.3
+        uses: actions/upload-artifact@b4b15b8c7c6ac21ea08fcf65892d2ee8f75cf882 # v4.4.3
         if: ${{ matrix.base_image == 'alpine' }}
         with:
           name: vaultwarden-${{ env.SOURCE_VERSION }}-linux-amd64
           path: vaultwarden-amd64
 
       - name: "Upload arm64 artifact"
-        uses: actions/upload-artifact@a8a3f3ad30e3422c9c7b888a15615d19a852ae32 # v3.1.3
+        uses: actions/upload-artifact@b4b15b8c7c6ac21ea08fcf65892d2ee8f75cf882 # v4.4.3
         if: ${{ matrix.base_image == 'alpine' }}
         with:
           name: vaultwarden-${{ env.SOURCE_VERSION }}-linux-arm64
           path: vaultwarden-arm64
 
       - name: "Upload armv7 artifact"
-        uses: actions/upload-artifact@a8a3f3ad30e3422c9c7b888a15615d19a852ae32 # v3.1.3
+        uses: actions/upload-artifact@b4b15b8c7c6ac21ea08fcf65892d2ee8f75cf882 # v4.4.3
         if: ${{ matrix.base_image == 'alpine' }}
         with:
           name: vaultwarden-${{ env.SOURCE_VERSION }}-linux-armv7
           path: vaultwarden-armv7
 
       - name: "Upload armv6 artifact"
-        uses: actions/upload-artifact@a8a3f3ad30e3422c9c7b888a15615d19a852ae32 # v3.1.3
+        uses: actions/upload-artifact@b4b15b8c7c6ac21ea08fcf65892d2ee8f75cf882 # v4.4.3
         if: ${{ matrix.base_image == 'alpine' }}
         with:
           name: vaultwarden-${{ env.SOURCE_VERSION }}-linux-armv6

.github/workflows/releasecache-cleanup.yml

@@ -13,11 +13,12 @@ name: Cleanup
 jobs:
   releasecache-cleanup:
     name: Releasecache Cleanup
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
+    continue-on-error: true
     timeout-minutes: 30
     steps:
       - name: Delete vaultwarden-buildcache containers
-        uses: actions/delete-package-versions@0d39a63126868f5eefaa47169615edd3c0f61e20 # v4.1.1
+        uses: actions/delete-package-versions@e5bc658cc4c965c472efe991f8beea3981499c55 # v5.0.0
         with:
           package-name: 'vaultwarden-buildcache'
           package-type: 'container'

.github/workflows/trivy.yml

@@ -9,15 +9,18 @@ on:
   pull_request:
     branches: [ "main" ]
   schedule:
-    - cron: '00 12 * * *'
+    - cron: '08 11 * * *'
 
 permissions:
   contents: read
 
 jobs:
   trivy-scan:
+    # Only run this in the master repo and not on forks
+    # When all forks run this at the same time, it is causing `Too Many Requests` issues
+    if: ${{ github.repository == 'dani-garcia/vaultwarden' }}
     name: Check
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     timeout-minutes: 30
     permissions:
       contents: read
@@ -25,10 +28,10 @@ jobs:
       actions: read
     steps:
       - name: Checkout code
-        uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 #v4.1.1
+        uses: actions/checkout@eef61447b9ff4aafe5dcd4e0bbf5d482be7e7871 #v4.2.1
 
       - name: Run Trivy vulnerability scanner
-        uses: aquasecurity/trivy-action@d43c1f16c00cfd3978dde6c07f4bbcf9eb6993ca # v0.16.1
+        uses: aquasecurity/trivy-action@5681af892cd0f4997658e2bacc62bd0a894cf564 # v0.27.0
         with:
           scan-type: repo
           ignore-unfixed: true
@@ -37,6 +40,6 @@ jobs:
           severity: CRITICAL,HIGH
 
       - name: Upload Trivy scan results to GitHub Security tab
-        uses: github/codeql-action/upload-sarif@b7bf0a3ed3ecfa44160715d7c442788f65f0f923 # v3.23.2
+        uses: github/codeql-action/upload-sarif@2bbafcdd7fbf96243689e764c2f15d9735164f33 # v3.26.6
         with:
           sarif_file: 'trivy-results.sarif'

.pre-commit-config.yaml

@@ -1,7 +1,7 @@
 ---
 repos:
 -   repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.5.0
+    rev: v4.6.0
     hooks:
     - id: check-yaml
     - id: check-json

Cargo.toml

@@ -3,7 +3,7 @@ name = "vaultwarden"
 version = "1.0.0"
 authors = ["Daniel García <dani-garcia@users.noreply.github.com>"]
 edition = "2021"
-rust-version = "1.73.0"
+rust-version = "1.79.0"
 resolver = "2"
 
 repository = "https://github.com/dani-garcia/vaultwarden"
@@ -18,29 +18,29 @@ build = "build.rs"
 enable_syslog = []
 mysql = ["diesel/mysql", "diesel_migrations/mysql"]
 postgresql = ["diesel/postgres", "diesel_migrations/postgres"]
-sqlite = ["diesel/sqlite", "diesel_migrations/sqlite", "libsqlite3-sys"]
+sqlite = ["diesel/sqlite", "diesel_migrations/sqlite", "dep:libsqlite3-sys"]
 # Enable to use a vendored and statically linked openssl
 vendored_openssl = ["openssl/vendored"]
 # Enable MiMalloc memory allocator to replace the default malloc
 # This can improve performance for Alpine builds
-enable_mimalloc = ["mimalloc"]
+enable_mimalloc = ["dep:mimalloc"]
 # This is a development dependency, and should only be used during development!
 # It enables the usage of the diesel_logger crate, which is able to output the generated queries.
 # You also need to set an env variable `QUERY_LOGGER=1` to fully activate this so you do not have to re-compile
 # if you want to turn off the logging for a specific run.
-query_logger = ["diesel_logger"]
+query_logger = ["dep:diesel_logger"]
 
 # Enable unstable features, requires nightly
 # Currently only used to enable rusts official ip support
 unstable = []
 
-[target."cfg(not(windows))".dependencies]
+[target."cfg(unix)".dependencies]
 # Logging
-syslog = "6.1.0"
+syslog = "6.1.1"
 
 [dependencies]
 # Logging
-log = "0.4.20"
+log = "0.4.22"
 fern = { version = "0.6.2", features = ["syslog-6", "reopen-1"] }
 tracing = { version = "0.1.40", features = ["log"] } # Needed to have lettre and webauthn-rs trace logging to work
 
@@ -48,60 +48,59 @@ tracing = { version = "0.1.40", features = ["log"] } # Needed to have lettre and
 dotenvy = { version = "0.15.7", default-features = false }
 
 # Lazy initialization
-once_cell = "1.19.0"
+once_cell = "1.20.2"
 
 # Numerical libraries
-num-traits = "0.2.17"
-num-derive = "0.4.1"
-bigdecimal = "0.4.2"
+num-traits = "0.2.19"
+num-derive = "0.4.2"
+bigdecimal = "0.4.5"
 
 # Web framework
-rocket = { version = "0.5.0", features = ["tls", "json"], default-features = false }
-rocket_ws = { version ="0.1.0" }
+rocket = { version = "0.5.1", features = ["tls", "json"], default-features = false }
+rocket_ws = { version ="0.1.1" }
 
 # WebSockets libraries
-tokio-tungstenite = "0.20.1"
-rmpv = "1.0.1" # MessagePack library
+rmpv = "1.3.0" # MessagePack library
 
 # Concurrent HashMap used for WebSocket messaging and favicons
-dashmap = "5.5.3"
+dashmap = "6.1.0"
 
 # Async futures
-futures = "0.3.30"
-tokio = { version = "1.35.1", features = ["rt-multi-thread", "fs", "io-util", "parking_lot", "time", "signal"] }
+futures = "0.3.31"
+tokio = { version = "1.40.0", features = ["rt-multi-thread", "fs", "io-util", "parking_lot", "time", "signal", "net"] }
 
 # A generic serialization/deserialization framework
-serde = { version = "1.0.195", features = ["derive"] }
-serde_json = "1.0.111"
+serde = { version = "1.0.210", features = ["derive"] }
+serde_json = "1.0.128"
 
 # A safe, extensible ORM and Query builder
-diesel = { version = "2.1.4", features = ["chrono", "r2d2", "numeric"] }
-diesel_migrations = "2.1.0"
+diesel = { version = "2.2.4", features = ["chrono", "r2d2", "numeric"] }
+diesel_migrations = "2.2.0"
 diesel_logger = { version = "0.3.0", optional = true }
 
 # Bundled/Static SQLite
-libsqlite3-sys = { version = "0.27.0", features = ["bundled"], optional = true }
+libsqlite3-sys = { version = "0.30.1", features = ["bundled"], optional = true }
 
 # Crypto-related libraries
 rand = { version = "0.8.5", features = ["small_rng"] }
-ring = "0.17.7"
+ring = "0.17.8"
 
 # UUID generation
-uuid = { version = "1.7.0", features = ["v4"] }
+uuid = { version = "1.10.0", features = ["v4"] }
 
 # Date and time libraries
-chrono = { version = "0.4.33", features = ["clock", "serde"], default-features = false }
-chrono-tz = "0.8.5"
-time = "0.3.31"
+chrono = { version = "0.4.38", features = ["clock", "serde"], default-features = false }
+chrono-tz = "0.10.0"
+time = "0.3.36"
 
 # Job scheduler
-job_scheduler_ng = "2.0.4"
+job_scheduler_ng = "2.0.5"
 
 # Data encoding library Hex/Base32/Base64
-data-encoding = "2.5.0"
+data-encoding = "2.6.0"
 
 # JWT library
-jsonwebtoken = "9.2.0"
+jsonwebtoken = "9.3.0"
 
 # TOTP library
 totp-lite = "2.0.1"
@@ -113,49 +112,50 @@ yubico = { version = "0.11.0", features = ["online-tokio"], default-features = f
 webauthn-rs = "0.3.2"
 
 # Handling of URL's for WebAuthn and favicons
-url = "2.5.0"
+url = "2.5.2"
 
 # Email libraries
-lettre = { version = "0.11.3", features = ["smtp-transport", "sendmail-transport", "builder", "serde", "tokio1-native-tls", "hostname", "tracing", "tokio1"], default-features = false }
+lettre = { version = "0.11.9", features = ["smtp-transport", "sendmail-transport", "builder", "serde", "tokio1-native-tls", "hostname", "tracing", "tokio1"], default-features = false }
 percent-encoding = "2.3.1" # URL encoding library used for URL's in the emails
-email_address = "0.2.4"
+email_address = "0.2.9"
 
 # HTML Template library
-handlebars = { version = "5.1.1", features = ["dir_source"] }
+handlebars = { version = "6.1.0", features = ["dir_source"] }
 
 # HTTP client (Used for favicons, version check, DUO and HIBP API)
-reqwest = { version = "0.11.23", features = ["stream", "json", "gzip", "brotli", "socks", "cookies", "trust-dns", "native-tls-alpn"] }
+reqwest = { version = "0.12.8", features = ["native-tls-alpn", "stream", "json", "gzip", "brotli", "socks", "cookies"] }
+hickory-resolver = "0.24.1"
 
 # Favicon extraction libraries
 html5gum = "0.5.7"
-regex = { version = "1.10.3", features = ["std", "perf", "unicode-perl"], default-features = false }
+regex = { version = "1.11.0", features = ["std", "perf", "unicode-perl"], default-features = false }
 data-url = "0.3.1"
-bytes = "1.5.0"
+bytes = "1.7.2"
 
 # Cache function results (Used for version check and favicon fetching)
-cached = { version = "0.48.1", features = ["async"] }
+cached = { version = "0.53.1", features = ["async"] }
 
 # Used for custom short lived cookie jar during favicon extraction
-cookie = "0.16.2"
-cookie_store = "0.19.1"
+cookie = "0.18.1"
+cookie_store = "0.21.0"
 
 # Used by U2F, JWT and PostgreSQL
-openssl = "0.10.63"
+openssl = "0.10.66"
 
 # CLI argument parsing
 pico-args = "0.5.0"
 
 # Macro ident concatenation
-paste = "1.0.14"
-governor = "0.6.0"
+paste = "1.0.15"
+governor = "0.6.3"
 
 # Check client versions for specific features.
-semver = "1.0.21"
+semver = "1.0.23"
 
 # Allow overriding the default memory allocator
 # Mainly used for the musl builds, since the default musl malloc is very slow
-mimalloc = { version = "0.1.39", features = ["secure"], default-features = false, optional = true }
-which = "6.0.0"
+mimalloc = { version = "0.1.43", features = ["secure"], default-features = false, optional = true }
+which = "6.0.3"
 
 # Argon2 library with support for the PHC format
 argon2 = "0.5.3"
@@ -163,7 +163,6 @@ argon2 = "0.5.3"
 # Reading a password from the cli for generating the Argon2id ADMIN_TOKEN
 rpassword = "7.3.1"
 
-
 # Strip debuginfo from the release builds
 # The symbols are the provide better panic traces
 # Also enable fat LTO and use 1 codegen unit for optimizations
@@ -172,7 +171,6 @@ strip = "debuginfo"
 lto = "fat"
 codegen-units = 1
 
-
 # A little bit of a speedup
 [profile.dev]
 split-debuginfo = "unpacked"
@@ -190,3 +188,77 @@ strip = "symbols"
 lto = "fat"
 codegen-units = 1
 panic = "abort"
+
+# Profile for systems with low resources
+# It will use less resources during build
+[profile.release-low]
+inherits = "release"
+strip = "symbols"
+lto = "thin"
+codegen-units = 16
+
+# Linting config
+# https://doc.rust-lang.org/rustc/lints/groups.html
+[lints.rust]
+# Forbid
+unsafe_code = "forbid"
+non_ascii_idents = "forbid"
+
+# Deny
+deprecated_in_future = "deny"
+future_incompatible = { level = "deny", priority = -1 }
+keyword_idents = { level = "deny", priority = -1 }
+let_underscore = { level = "deny", priority = -1 }
+noop_method_call = "deny"
+refining_impl_trait = { level = "deny", priority = -1 }
+rust_2018_idioms = { level = "deny", priority = -1 }
+rust_2021_compatibility = { level = "deny", priority = -1 }
+# rust_2024_compatibility = { level = "deny", priority = -1 } # Enable once we are at MSRV 1.81.0
+single_use_lifetimes = "deny"
+trivial_casts = "deny"
+trivial_numeric_casts = "deny"
+unused = { level = "deny", priority = -1 }
+unused_import_braces = "deny"
+unused_lifetimes = "deny"
+unused_qualifications = "deny"
+variant_size_differences = "deny"
+# The lints below are part of the rust_2024_compatibility group
+static-mut-refs = "deny"
+unsafe-op-in-unsafe-fn = "deny"
+
+# https://rust-lang.github.io/rust-clippy/stable/index.html
+[lints.clippy]
+# Warn
+dbg_macro = "warn"
+todo = "warn"
+
+# Deny
+case_sensitive_file_extension_comparisons = "deny"
+cast_lossless = "deny"
+clone_on_ref_ptr = "deny"
+equatable_if_let = "deny"
+filter_map_next = "deny"
+float_cmp_const = "deny"
+inefficient_to_string = "deny"
+iter_on_empty_collections = "deny"
+iter_on_single_items = "deny"
+linkedlist = "deny"
+macro_use_imports = "deny"
+manual_assert = "deny"
+manual_instant_elapsed = "deny"
+manual_string_new = "deny"
+match_on_vec_items = "deny"
+match_wildcard_for_single_variants = "deny"
+mem_forget = "deny"
+needless_continue = "deny"
+needless_lifetimes = "deny"
+option_option = "deny"
+string_add_assign = "deny"
+string_to_string = "deny"
+unnecessary_join = "deny"
+unnecessary_self_imports = "deny"
+unnested_or_patterns = "deny"
+unused_async = "deny"
+unused_self = "deny"
+verbose_file_reads = "deny"
+zero_sized_map_values = "deny"

SECURITY.md

@@ -39,7 +39,11 @@ Thank you for helping keep Vaultwarden and our users safe!
 
 # How to contact us
 
-- You can contact us on Matrix https://matrix.to/#/#vaultwarden:matrix.org (user: `@danig:matrix.org`)
-- You can send an ![security-contact](/.github/security-contact.gif) to report a security issue.
-  - If you want to send an encrypted email you can use the following GPG key:<br>
-    https://keyserver.ubuntu.com/pks/lookup?search=0xB9B7A108373276BF3C0406F9FC8A7D14C3CD543A&fingerprint=on&op=index
+- You can contact us on Matrix https://matrix.to/#/#vaultwarden:matrix.org (users: `@danig:matrix.org` and/or `@blackdex:matrix.org`)
+- You can send an ![security-contact](/.github/security-contact.gif) to report a security issue.<br>
+  If you want to send an encrypted email you can use the following GPG key: 13BB3A34C9E380258CE43D595CB150B31F6426BC<br>
+  It can be found on several public GPG key servers.<br>
+    * https://keys.openpgp.org/search?q=security%40vaultwarden.org
+    * https://keys.mailvelope.com/pks/lookup?op=get&search=security%40vaultwarden.org
+    * https://pgpkeys.eu/pks/lookup?search=security%40vaultwarden.org&fingerprint=on&op=index
+    * https://keyserver.ubuntu.com/pks/lookup?search=security%40vaultwarden.org&fingerprint=on&op=index

build.rs

@@ -17,6 +17,13 @@ fn main() {
         "You need to enable one DB backend. To build with previous defaults do: cargo build --features sqlite"
     );
 
+    // Use check-cfg to let cargo know which cfg's we define,
+    // and avoid warnings when they are used in the code.
+    println!("cargo::rustc-check-cfg=cfg(sqlite)");
+    println!("cargo::rustc-check-cfg=cfg(mysql)");
+    println!("cargo::rustc-check-cfg=cfg(postgresql)");
+    println!("cargo::rustc-check-cfg=cfg(query_logger)");
+
     // Rerun when these paths are changed.
     // Someone could have checked-out a tag or specific commit, but no other files changed.
     println!("cargo:rerun-if-changed=.git");
@@ -49,11 +56,11 @@ fn run(args: &[&str]) -> Result<String, std::io::Error> {
 
 /// This method reads info from Git, namely tags, branch, and revision
 /// To access these values, use:
-///    - env!("GIT_EXACT_TAG")
-///    - env!("GIT_LAST_TAG")
-///    - env!("GIT_BRANCH")
-///    - env!("GIT_REV")
-///    - env!("VW_VERSION")
+///    - `env!("GIT_EXACT_TAG")`
+///    - `env!("GIT_LAST_TAG")`
+///    - `env!("GIT_BRANCH")`
+///    - `env!("GIT_REV")`
+///    - `env!("VW_VERSION")`
 fn version_from_git_info() -> Result<String, std::io::Error> {
     // The exact tag for the current commit, can be empty when
     // the current commit doesn't have an associated tag

docker/DockerSettings.yaml

@@ -1,12 +1,13 @@
 ---
-vault_version: "v2024.1.2"
-vault_image_digest: "sha256:ac07a71cbcd199e3c9a0639c04234ba2f1ba16cfa2a45b08a7ae27eb82f8e13b"
-# Cross Compile Docker Helper Scripts v1.3.0
+vault_version: "v2024.6.2c"
+vault_image_digest: "sha256:409ab328ca931439cb916b388a4bb784bd44220717aaf74cf71620c23e34fc2b"
+# Cross Compile Docker Helper Scripts v1.5.0
 # We use the linux/amd64 platform shell scripts since there is no difference between the different platform scripts
-xx_image_digest: "sha256:c9609ace652bbe51dd4ce90e0af9d48a4590f1214246da5bc70e46f6dd586edc"
-rust_version: 1.75.0 # Rust version to be used
+# https://github.com/tonistiigi/xx | https://hub.docker.com/r/tonistiigi/xx/tags
+xx_image_digest: "sha256:1978e7a58a1777cb0ef0dde76bad60b7914b21da57cfa88047875e4f364297aa"
+rust_version: 1.81.0 # Rust version to be used
 debian_version: bookworm # Debian release name to be used
-alpine_version: 3.19 # Alpine version to be used
+alpine_version: "3.20" # Alpine version to be used
 # For which platforms/architectures will we try to build images
 platforms: ["linux/amd64", "linux/arm64", "linux/arm/v7", "linux/arm/v6"]
 # Determine the build images per OS/Arch

docker/Dockerfile.alpine

@@ -1,4 +1,5 @@
 # syntax=docker/dockerfile:1
+# check=skip=FromPlatformFlagConstDisallowed,RedundantTargetPlatform
 
 # This file was generated using a Jinja2 template.
 # Please make your changes in `DockerSettings.yaml` or `Dockerfile.j2` and then `make`
@@ -18,27 +19,27 @@
 # - From https://hub.docker.com/r/vaultwarden/web-vault/tags,
 #   click the tag name to view the digest of the image it currently points to.
 # - From the command line:
-#     $ docker pull docker.io/vaultwarden/web-vault:v2024.1.2
-#     $ docker image inspect --format "{{.RepoDigests}}" docker.io/vaultwarden/web-vault:v2024.1.2
-#     [docker.io/vaultwarden/web-vault@sha256:ac07a71cbcd199e3c9a0639c04234ba2f1ba16cfa2a45b08a7ae27eb82f8e13b]
+#     $ docker pull docker.io/vaultwarden/web-vault:v2024.6.2c
+#     $ docker image inspect --format "{{.RepoDigests}}" docker.io/vaultwarden/web-vault:v2024.6.2c
+#     [docker.io/vaultwarden/web-vault@sha256:409ab328ca931439cb916b388a4bb784bd44220717aaf74cf71620c23e34fc2b]
 #
 # - Conversely, to get the tag name from the digest:
-#     $ docker image inspect --format "{{.RepoTags}}" docker.io/vaultwarden/web-vault@sha256:ac07a71cbcd199e3c9a0639c04234ba2f1ba16cfa2a45b08a7ae27eb82f8e13b
-#     [docker.io/vaultwarden/web-vault:v2024.1.2]
+#     $ docker image inspect --format "{{.RepoTags}}" docker.io/vaultwarden/web-vault@sha256:409ab328ca931439cb916b388a4bb784bd44220717aaf74cf71620c23e34fc2b
+#     [docker.io/vaultwarden/web-vault:v2024.6.2c]
 #
-FROM --platform=linux/amd64 docker.io/vaultwarden/web-vault@sha256:ac07a71cbcd199e3c9a0639c04234ba2f1ba16cfa2a45b08a7ae27eb82f8e13b as vault
+FROM --platform=linux/amd64 docker.io/vaultwarden/web-vault@sha256:409ab328ca931439cb916b388a4bb784bd44220717aaf74cf71620c23e34fc2b AS vault
 
 ########################## ALPINE BUILD IMAGES ##########################
 ## NOTE: The Alpine Base Images do not support other platforms then linux/amd64
 ## And for Alpine we define all build images here, they will only be loaded when actually used
-FROM --platform=linux/amd64 ghcr.io/blackdex/rust-musl:x86_64-musl-stable-1.75.0 as build_amd64
-FROM --platform=linux/amd64 ghcr.io/blackdex/rust-musl:aarch64-musl-stable-1.75.0 as build_arm64
-FROM --platform=linux/amd64 ghcr.io/blackdex/rust-musl:armv7-musleabihf-stable-1.75.0 as build_armv7
-FROM --platform=linux/amd64 ghcr.io/blackdex/rust-musl:arm-musleabi-stable-1.75.0 as build_armv6
+FROM --platform=linux/amd64 ghcr.io/blackdex/rust-musl:x86_64-musl-stable-1.81.0 AS build_amd64
+FROM --platform=linux/amd64 ghcr.io/blackdex/rust-musl:aarch64-musl-stable-1.81.0 AS build_arm64
+FROM --platform=linux/amd64 ghcr.io/blackdex/rust-musl:armv7-musleabihf-stable-1.81.0 AS build_armv7
+FROM --platform=linux/amd64 ghcr.io/blackdex/rust-musl:arm-musleabi-stable-1.81.0 AS build_armv6
 
 ########################## BUILD IMAGE ##########################
 # hadolint ignore=DL3006
-FROM --platform=linux/amd64 build_${TARGETARCH}${TARGETVARIANT} as build
+FROM --platform=linux/amd64 build_${TARGETARCH}${TARGETVARIANT} AS build
 ARG TARGETARCH
 ARG TARGETVARIANT
 ARG TARGETPLATFORM
@@ -58,33 +59,29 @@ ENV DEBIAN_FRONTEND=noninteractive \
 
 
 # Create CARGO_HOME folder and don't download rust docs
-RUN mkdir -pv "${CARGO_HOME}" \
-    && rustup set profile minimal
+RUN mkdir -pv "${CARGO_HOME}" && \
+    rustup set profile minimal
 
 # Creates a dummy project used to grab dependencies
 RUN USER=root cargo new --bin /app
 WORKDIR /app
 
-# Shared variables across Debian and Alpine
+# Environment variables for Cargo on Alpine based builds
 RUN echo "export CARGO_TARGET=${RUST_MUSL_CROSS_TARGET}" >> /env-cargo && \
-    # To be able to build the armv6 image with mimalloc we need to tell the linker to also look for libatomic
-    if [[ "${TARGETARCH}${TARGETVARIANT}" == "armv6" ]] ; then echo "export RUSTFLAGS='-Clink-arg=-latomic'" >> /env-cargo ; fi && \
     # Output the current contents of the file
     cat /env-cargo
 
-# Enable MiMalloc to improve performance on Alpine builds
-ARG DB=sqlite,mysql,postgresql,enable_mimalloc
-
 RUN source /env-cargo && \
     rustup target add "${CARGO_TARGET}"
 
-ARG CARGO_PROFILE=release
-ARG VW_VERSION
-
 # Copies over *only* your manifests and build files
-COPY ./Cargo.* ./
-COPY ./rust-toolchain.toml ./rust-toolchain.toml
-COPY ./build.rs ./build.rs
+COPY ./Cargo.* ./rust-toolchain.toml ./build.rs ./
+
+ARG CARGO_PROFILE=release
+
+# Configure the DB ARG as late as possible to not invalidate the cached layers above
+# Enable MiMalloc to improve performance on Alpine builds
+ARG DB=sqlite,mysql,postgresql,enable_mimalloc
 
 # Builds your dependencies and removes the
 # dummy project, except the target folder
@@ -97,6 +94,8 @@ RUN source /env-cargo && \
 # To avoid copying unneeded files, use .dockerignore
 COPY . .
 
+ARG VW_VERSION
+
 # Builds again, this time it will be the actual source files being build
 RUN source /env-cargo && \
     # Make sure that we actually build the project by updating the src/main.rs timestamp
@@ -127,7 +126,7 @@ RUN source /env-cargo && \
 # To uninstall: docker run --privileged --rm tonistiigi/binfmt --uninstall 'qemu-*'
 #
 # We need to add `--platform` here, because of a podman bug: https://github.com/containers/buildah/issues/4742
-FROM --platform=$TARGETPLATFORM docker.io/library/alpine:3.19
+FROM --platform=$TARGETPLATFORM docker.io/library/alpine:3.20
 
 ENV ROCKET_PROFILE="release" \
     ROCKET_ADDRESS=0.0.0.0 \
@@ -144,14 +143,12 @@ RUN mkdir /data && \
 
 VOLUME /data
 EXPOSE 80
-EXPOSE 3012
 
 # Copies the files from the context (Rocket.toml file and web-vault)
 # and the binary from the "build" stage to the current stage
 WORKDIR /
 
-COPY docker/healthcheck.sh /healthcheck.sh
-COPY docker/start.sh /start.sh
+COPY docker/healthcheck.sh docker/start.sh /
 
 COPY --from=vault /web-vault ./web-vault
 COPY --from=build /app/target/final/vaultwarden .

docker/Dockerfile.debian

@@ -1,4 +1,5 @@
 # syntax=docker/dockerfile:1
+# check=skip=FromPlatformFlagConstDisallowed,RedundantTargetPlatform
 
 # This file was generated using a Jinja2 template.
 # Please make your changes in `DockerSettings.yaml` or `Dockerfile.j2` and then `make`
@@ -18,24 +19,24 @@
 # - From https://hub.docker.com/r/vaultwarden/web-vault/tags,
 #   click the tag name to view the digest of the image it currently points to.
 # - From the command line:
-#     $ docker pull docker.io/vaultwarden/web-vault:v2024.1.2
-#     $ docker image inspect --format "{{.RepoDigests}}" docker.io/vaultwarden/web-vault:v2024.1.2
-#     [docker.io/vaultwarden/web-vault@sha256:ac07a71cbcd199e3c9a0639c04234ba2f1ba16cfa2a45b08a7ae27eb82f8e13b]
+#     $ docker pull docker.io/vaultwarden/web-vault:v2024.6.2c
+#     $ docker image inspect --format "{{.RepoDigests}}" docker.io/vaultwarden/web-vault:v2024.6.2c
+#     [docker.io/vaultwarden/web-vault@sha256:409ab328ca931439cb916b388a4bb784bd44220717aaf74cf71620c23e34fc2b]
 #
 # - Conversely, to get the tag name from the digest:
-#     $ docker image inspect --format "{{.RepoTags}}" docker.io/vaultwarden/web-vault@sha256:ac07a71cbcd199e3c9a0639c04234ba2f1ba16cfa2a45b08a7ae27eb82f8e13b
-#     [docker.io/vaultwarden/web-vault:v2024.1.2]
+#     $ docker image inspect --format "{{.RepoTags}}" docker.io/vaultwarden/web-vault@sha256:409ab328ca931439cb916b388a4bb784bd44220717aaf74cf71620c23e34fc2b
+#     [docker.io/vaultwarden/web-vault:v2024.6.2c]
 #
-FROM --platform=linux/amd64 docker.io/vaultwarden/web-vault@sha256:ac07a71cbcd199e3c9a0639c04234ba2f1ba16cfa2a45b08a7ae27eb82f8e13b as vault
+FROM --platform=linux/amd64 docker.io/vaultwarden/web-vault@sha256:409ab328ca931439cb916b388a4bb784bd44220717aaf74cf71620c23e34fc2b AS vault
 
 ########################## Cross Compile Docker Helper Scripts ##########################
 ## We use the linux/amd64 no matter which Build Platform, since these are all bash scripts
 ## And these bash scripts do not have any significant difference if at all
-FROM --platform=linux/amd64 docker.io/tonistiigi/xx@sha256:c9609ace652bbe51dd4ce90e0af9d48a4590f1214246da5bc70e46f6dd586edc AS xx
+FROM --platform=linux/amd64 docker.io/tonistiigi/xx@sha256:1978e7a58a1777cb0ef0dde76bad60b7914b21da57cfa88047875e4f364297aa AS xx
 
 ########################## BUILD IMAGE ##########################
 # hadolint ignore=DL3006
-FROM --platform=$BUILDPLATFORM docker.io/library/rust:1.75.0-slim-bookworm as build
+FROM --platform=$BUILDPLATFORM docker.io/library/rust:1.81.0-slim-bookworm AS build
 COPY --from=xx / /
 ARG TARGETARCH
 ARG TARGETVARIANT
@@ -64,10 +65,7 @@ RUN apt-get update && \
         "libc6-$(xx-info debian-arch)-cross" \
         "libc6-dev-$(xx-info debian-arch)-cross" \
         "linux-libc-dev-$(xx-info debian-arch)-cross" && \
-    # Run xx-cargo early, since it sometimes seems to break when run at a later stage
-    echo "export CARGO_TARGET=$(xx-cargo --print-target-triple)" >> /env-cargo
-
-RUN xx-apt-get install -y \
+    xx-apt-get install -y \
         --no-install-recommends \
         gcc \
         libmariadb3 \
@@ -78,19 +76,29 @@ RUN xx-apt-get install -y \
     # Force install arch dependend mariadb dev packages
     # Installing them the normal way breaks several other packages (again)
     apt-get download "libmariadb-dev-compat:$(xx-info debian-arch)" "libmariadb-dev:$(xx-info debian-arch)" && \
-    dpkg --force-all -i ./libmariadb-dev*.deb
+    dpkg --force-all -i ./libmariadb-dev*.deb && \
+    # Run xx-cargo early, since it sometimes seems to break when run at a later stage
+    echo "export CARGO_TARGET=$(xx-cargo --print-target-triple)" >> /env-cargo
 
 # Create CARGO_HOME folder and don't download rust docs
-RUN mkdir -pv "${CARGO_HOME}" \
-    && rustup set profile minimal
+RUN mkdir -pv "${CARGO_HOME}" && \
+    rustup set profile minimal
 
 # Creates a dummy project used to grab dependencies
 RUN USER=root cargo new --bin /app
 WORKDIR /app
 
-# Environment variables for cargo across Debian and Alpine
+# Environment variables for Cargo on Debian based builds
+ARG ARCH_OPENSSL_LIB_DIR \
+    ARCH_OPENSSL_INCLUDE_DIR
+
 RUN source /env-cargo && \
     if xx-info is-cross ; then \
+        # Some special variables if needed to override some build paths
+        if [[ -n "${ARCH_OPENSSL_LIB_DIR}" && -n "${ARCH_OPENSSL_INCLUDE_DIR}" ]]; then \
+            echo "export $(echo "${CARGO_TARGET}" | tr '[:lower:]' '[:upper:]' | tr - _)_OPENSSL_LIB_DIR=${ARCH_OPENSSL_LIB_DIR}" >> /env-cargo && \
+            echo "export $(echo "${CARGO_TARGET}" | tr '[:lower:]' '[:upper:]' | tr - _)_OPENSSL_INCLUDE_DIR=${ARCH_OPENSSL_INCLUDE_DIR}" >> /env-cargo ; \
+        fi && \
         # We can't use xx-cargo since that uses clang, which doesn't work for our libraries.
         # Because of this we generate the needed environment variables here which we can load in the needed steps.
         echo "export CC_$(echo "${CARGO_TARGET}" | tr '[:upper:]' '[:lower:]' | tr - _)=/usr/bin/$(xx-info)-gcc" >> /env-cargo && \
@@ -103,19 +111,16 @@ RUN source /env-cargo && \
     # Output the current contents of the file
     cat /env-cargo
 
-# Configure the DB ARG as late as possible to not invalidate the cached layers above
-ARG DB=sqlite,mysql,postgresql
-
 RUN source /env-cargo && \
     rustup target add "${CARGO_TARGET}"
 
-ARG CARGO_PROFILE=release
-ARG VW_VERSION
-
 # Copies over *only* your manifests and build files
-COPY ./Cargo.* ./
-COPY ./rust-toolchain.toml ./rust-toolchain.toml
-COPY ./build.rs ./build.rs
+COPY ./Cargo.* ./rust-toolchain.toml ./build.rs ./
+
+ARG CARGO_PROFILE=release
+
+# Configure the DB ARG as late as possible to not invalidate the cached layers above
+ARG DB=sqlite,mysql,postgresql
 
 # Builds your dependencies and removes the
 # dummy project, except the target folder
@@ -128,6 +133,8 @@ RUN source /env-cargo && \
 # To avoid copying unneeded files, use .dockerignore
 COPY . .
 
+ARG VW_VERSION
+
 # Builds again, this time it will be the actual source files being build
 RUN source /env-cargo && \
     # Make sure that we actually build the project by updating the src/main.rs timestamp
@@ -179,14 +186,12 @@ RUN mkdir /data && \
 
 VOLUME /data
 EXPOSE 80
-EXPOSE 3012
 
 # Copies the files from the context (Rocket.toml file and web-vault)
 # and the binary from the "build" stage to the current stage
 WORKDIR /
 
-COPY docker/healthcheck.sh /healthcheck.sh
-COPY docker/start.sh /start.sh
+COPY docker/healthcheck.sh docker/start.sh /
 
 COPY --from=vault /web-vault ./web-vault
 COPY --from=build /app/target/final/vaultwarden .

docker/Dockerfile.j2

@@ -1,4 +1,5 @@
 # syntax=docker/dockerfile:1
+# check=skip=FromPlatformFlagConstDisallowed,RedundantTargetPlatform
 
 # This file was generated using a Jinja2 template.
 # Please make your changes in `DockerSettings.yaml` or `Dockerfile.j2` and then `make`
@@ -26,7 +27,7 @@
 #     $ docker image inspect --format "{{ '{{' }}.RepoTags}}" docker.io/vaultwarden/web-vault@{{ vault_image_digest }}
 #     [docker.io/vaultwarden/web-vault:{{ vault_version }}]
 #
-FROM --platform=linux/amd64 docker.io/vaultwarden/web-vault@{{ vault_image_digest }} as vault
+FROM --platform=linux/amd64 docker.io/vaultwarden/web-vault@{{ vault_image_digest }} AS vault
 
 {% if base == "debian" %}
 ########################## Cross Compile Docker Helper Scripts ##########################
@@ -38,13 +39,13 @@ FROM --platform=linux/amd64 docker.io/tonistiigi/xx@{{ xx_image_digest }} AS xx
 ## NOTE: The Alpine Base Images do not support other platforms then linux/amd64
 ## And for Alpine we define all build images here, they will only be loaded when actually used
 {% for arch in build_stage_image[base].arch_image %}
-FROM --platform={{ build_stage_image[base].platform }} {{ build_stage_image[base].arch_image[arch] }} as build_{{ arch }}
+FROM --platform={{ build_stage_image[base].platform }} {{ build_stage_image[base].arch_image[arch] }} AS build_{{ arch }}
 {% endfor %}
 {% endif %}
 
 ########################## BUILD IMAGE ##########################
 # hadolint ignore=DL3006
-FROM --platform={{ build_stage_image[base].platform }} {{ build_stage_image[base].image }} as build
+FROM --platform={{ build_stage_image[base].platform }} {{ build_stage_image[base].image }} AS build
 {% if base == "debian" %}
 COPY --from=xx / /
 {% endif %}
@@ -82,10 +83,7 @@ RUN apt-get update && \
         "libc6-$(xx-info debian-arch)-cross" \
         "libc6-dev-$(xx-info debian-arch)-cross" \
         "linux-libc-dev-$(xx-info debian-arch)-cross" && \
-    # Run xx-cargo early, since it sometimes seems to break when run at a later stage
-    echo "export CARGO_TARGET=$(xx-cargo --print-target-triple)" >> /env-cargo
-
-RUN xx-apt-get install -y \
+    xx-apt-get install -y \
         --no-install-recommends \
         gcc \
         libmariadb3 \
@@ -96,21 +94,31 @@ RUN xx-apt-get install -y \
     # Force install arch dependend mariadb dev packages
     # Installing them the normal way breaks several other packages (again)
     apt-get download "libmariadb-dev-compat:$(xx-info debian-arch)" "libmariadb-dev:$(xx-info debian-arch)" && \
-    dpkg --force-all -i ./libmariadb-dev*.deb
+    dpkg --force-all -i ./libmariadb-dev*.deb && \
+    # Run xx-cargo early, since it sometimes seems to break when run at a later stage
+    echo "export CARGO_TARGET=$(xx-cargo --print-target-triple)" >> /env-cargo
 {% endif %}
 
 # Create CARGO_HOME folder and don't download rust docs
-RUN mkdir -pv "${CARGO_HOME}" \
-    && rustup set profile minimal
+RUN mkdir -pv "${CARGO_HOME}" && \
+    rustup set profile minimal
 
 # Creates a dummy project used to grab dependencies
 RUN USER=root cargo new --bin /app
 WORKDIR /app
 
 {% if base == "debian" %}
-# Environment variables for cargo across Debian and Alpine
+# Environment variables for Cargo on Debian based builds
+ARG ARCH_OPENSSL_LIB_DIR \
+    ARCH_OPENSSL_INCLUDE_DIR
+
 RUN source /env-cargo && \
     if xx-info is-cross ; then \
+        # Some special variables if needed to override some build paths
+        if [[ -n "${ARCH_OPENSSL_LIB_DIR}" && -n "${ARCH_OPENSSL_INCLUDE_DIR}" ]]; then \
+            echo "export $(echo "${CARGO_TARGET}" | tr '[:lower:]' '[:upper:]' | tr - _)_OPENSSL_LIB_DIR=${ARCH_OPENSSL_LIB_DIR}" >> /env-cargo && \
+            echo "export $(echo "${CARGO_TARGET}" | tr '[:lower:]' '[:upper:]' | tr - _)_OPENSSL_INCLUDE_DIR=${ARCH_OPENSSL_INCLUDE_DIR}" >> /env-cargo ; \
+        fi && \
         # We can't use xx-cargo since that uses clang, which doesn't work for our libraries.
         # Because of this we generate the needed environment variables here which we can load in the needed steps.
         echo "export CC_$(echo "${CARGO_TARGET}" | tr '[:upper:]' '[:lower:]' | tr - _)=/usr/bin/$(xx-info)-gcc" >> /env-cargo && \
@@ -123,30 +131,28 @@ RUN source /env-cargo && \
     # Output the current contents of the file
     cat /env-cargo
 
-# Configure the DB ARG as late as possible to not invalidate the cached layers above
-ARG DB=sqlite,mysql,postgresql
 {% elif base == "alpine" %}
-# Shared variables across Debian and Alpine
+# Environment variables for Cargo on Alpine based builds
 RUN echo "export CARGO_TARGET=${RUST_MUSL_CROSS_TARGET}" >> /env-cargo && \
-    # To be able to build the armv6 image with mimalloc we need to tell the linker to also look for libatomic
-    if [[ "${TARGETARCH}${TARGETVARIANT}" == "armv6" ]] ; then echo "export RUSTFLAGS='-Clink-arg=-latomic'" >> /env-cargo ; fi && \
     # Output the current contents of the file
     cat /env-cargo
 
-# Enable MiMalloc to improve performance on Alpine builds
-ARG DB=sqlite,mysql,postgresql,enable_mimalloc
 {% endif %}
-
 RUN source /env-cargo && \
     rustup target add "${CARGO_TARGET}"
 
-ARG CARGO_PROFILE=release
-ARG VW_VERSION
-
 # Copies over *only* your manifests and build files
-COPY ./Cargo.* ./
-COPY ./rust-toolchain.toml ./rust-toolchain.toml
-COPY ./build.rs ./build.rs
+COPY ./Cargo.* ./rust-toolchain.toml ./build.rs ./
+
+ARG CARGO_PROFILE=release
+
+# Configure the DB ARG as late as possible to not invalidate the cached layers above
+{% if base == "debian" %}
+ARG DB=sqlite,mysql,postgresql
+{% elif base == "alpine" %}
+# Enable MiMalloc to improve performance on Alpine builds
+ARG DB=sqlite,mysql,postgresql,enable_mimalloc
+{% endif %}
 
 # Builds your dependencies and removes the
 # dummy project, except the target folder
@@ -159,6 +165,8 @@ RUN source /env-cargo && \
 # To avoid copying unneeded files, use .dockerignore
 COPY . .
 
+ARG VW_VERSION
+
 # Builds again, this time it will be the actual source files being build
 RUN source /env-cargo && \
     # Make sure that we actually build the project by updating the src/main.rs timestamp
@@ -222,14 +230,12 @@ RUN mkdir /data && \
 
 VOLUME /data
 EXPOSE 80
-EXPOSE 3012
 
 # Copies the files from the context (Rocket.toml file and web-vault)
 # and the binary from the "build" stage to the current stage
 WORKDIR /
 
-COPY docker/healthcheck.sh /healthcheck.sh
-COPY docker/start.sh /start.sh
+COPY docker/healthcheck.sh docker/start.sh /
 
 COPY --from=vault /web-vault ./web-vault
 COPY --from=build /app/target/final/vaultwarden .

docker/README.md

@@ -11,6 +11,11 @@ With just these two files we can build both Debian and Alpine images for the fol
  - armv7 (linux/arm/v7)
  - armv6 (linux/arm/v6)
 
+Some unsupported platforms for Debian based images. These are not built and tested by default and are only provided to make it easier for users to build for these architectures.
+- 386     (linux/386)
+- ppc64le (linux/ppc64le)
+- s390x   (linux/s390x)
+
 To build these containers you need to enable QEMU binfmt support to be able to run/emulate architectures which are different then your host.<br>
 This ensures the container build process can run binaries from other architectures.<br>
 

docker/docker-bake.hcl

@@ -125,6 +125,40 @@ target "debian-armv6" {
   tags = generate_tags("", "-armv6")
 }
 
+// ==== Start of unsupported Debian architecture targets ===
+// These are provided just to help users build for these rare platforms
+// They will not be built by default
+target "debian-386" {
+  inherits = ["debian"]
+  platforms = ["linux/386"]
+  tags = generate_tags("", "-386")
+  args = {
+    ARCH_OPENSSL_LIB_DIR = "/usr/lib/i386-linux-gnu"
+    ARCH_OPENSSL_INCLUDE_DIR = "/usr/include/i386-linux-gnu"
+  }
+}
+
+target "debian-ppc64le" {
+  inherits = ["debian"]
+  platforms = ["linux/ppc64le"]
+  tags = generate_tags("", "-ppc64le")
+  args = {
+    ARCH_OPENSSL_LIB_DIR = "/usr/lib/powerpc64le-linux-gnu"
+    ARCH_OPENSSL_INCLUDE_DIR = "/usr/include/powerpc64le-linux-gnu"
+  }
+}
+
+target "debian-s390x" {
+  inherits = ["debian"]
+  platforms = ["linux/s390x"]
+  tags = generate_tags("", "-s390x")
+  args = {
+    ARCH_OPENSSL_LIB_DIR = "/usr/lib/s390x-linux-gnu"
+    ARCH_OPENSSL_INCLUDE_DIR = "/usr/include/s390x-linux-gnu"
+  }
+}
+// ==== End of unsupported Debian architecture targets ===
+
 // A Group to build all platforms individually for local testing
 group "debian-all" {
   targets = ["debian-amd64", "debian-arm64", "debian-armv7", "debian-armv6"]

docker/start.sh

@@ -1,5 +1,9 @@
 #!/bin/sh
 
+if [ -n "${UMASK}" ]; then
+    umask "${UMASK}"
+fi
+
 if [ -r /etc/vaultwarden.sh ]; then
     . /etc/vaultwarden.sh
 elif [ -r /etc/bitwarden_rs.sh ]; then

migrations/mysql/2024-02-14-135828_change_time_stamp_data_type/up.sql

@@ -0,0 +1 @@
+ALTER TABLE twofactor MODIFY last_used BIGINT NOT NULL;

migrations/mysql/2024-06-05-131359_add_2fa_duo_store/down.sql

@@ -0,0 +1 @@
+DROP TABLE twofactor_duo_ctx;

migrations/mysql/2024-06-05-131359_add_2fa_duo_store/up.sql

@@ -0,0 +1,8 @@
+CREATE TABLE twofactor_duo_ctx (
+    state      VARCHAR(64)  NOT NULL,
+    user_email VARCHAR(255) NOT NULL,
+    nonce      VARCHAR(64)  NOT NULL,
+    exp        BIGINT       NOT NULL,
+
+    PRIMARY KEY (state)
+);

migrations/mysql/2024-09-04-091351_use_device_type_for_mails/down.sql

@@ -0,0 +1 @@
+ALTER TABLE `twofactor_incomplete` DROP COLUMN `device_type`;

migrations/mysql/2024-09-04-091351_use_device_type_for_mails/up.sql

@@ -0,0 +1 @@
+ALTER TABLE twofactor_incomplete ADD COLUMN device_type INTEGER NOT NULL DEFAULT 14; -- 14 = Unknown Browser

migrations/postgresql/2024-02-14-135953_change_time_stamp_data_type/up.sql

@@ -0,0 +1,3 @@
+ALTER TABLE twofactor
+ALTER COLUMN last_used TYPE BIGINT,
+ALTER COLUMN last_used SET NOT NULL;