The only compilation system that works for sure is the MSVC project files. I've tried my best to
update the other compilation system but I count on the community to check and fix them.
This is Zdeno Miklas video texture plugin ported to trunk.
The original plugin API is maintained (can be found here http://home.scarlet.be/~tsi46445/blender/blendVideoTex.html)
EXCEPT for the following:
The module name is changed to VideoTexture (instead of blendVideoTex).
A new (and only) video source is now available: VideoFFmpeg()
You must pass 1 to 4 arguments when you create it (you can use named arguments):
VideoFFmpeg(file) : play a video file
VideoFFmpeg(file, capture, rate, width, height) : start a live video capture
file:
In the first form, file is a video file name, relative to startup directory.
It can also be a URL, FFmpeg will happily stream a video from a network source.
In the second form, file is empty or is a hint for the format of the video capture.
In Windows, file is ignored and should be empty or not specified.
In Linux, ffmpeg supports two types of device: VideoForLinux and DV1394.
The user specifies the type of device with the file parameter:
[<device_type>][:<standard>]
<device_type> : 'v4l' for VideoForLinux, 'dv1394' for DV1394; default to 'v4l'
<standard> : 'pal', 'secam' or 'ntsc', default to 'ntsc'
The driver name is constructed automatically from the device types:
v4l : /dev/video<capture>
dv1394: /dev/dv1394/<capture>
If you have different driver name, you can specify the driver name explicitely
instead of device type. Examples of valid file parameter:
/dev/v4l/video0:pal
/dev/ieee1394/1:ntsc
dv1394:ntsc
v4l:pal
:secam
capture:
Defines the index number of the capture source, starting from 0. The first capture device is always 0.
The VideoTexutre modules knows that you want to start a live video capture when you set this parameter to a number >= 0. Setting this parameter < 0 indicates a video file playback. Default value is -1.
rate:
the capture frame rate, by default 25 frames/sec
width:
height:
Width and height of the video capture in pixel, default value 0.
In Windows you must specify these values and they must fit with the capture device capability.
For example, if you have a webcam that can capture at 160x120, 320x240 or 640x480,
you must specify one of these couple of values or the opening of the video source will fail.
In Linux, default values are provided by the VideoForLinux driver if you don't specify width and height.
Simple example
**************
1. Texture definition script:
import VideoTexture
contr = GameLogic.getCurrentController()
obj = contr.getOwner()
if not hasattr(GameLogic, 'video'):
matID = VideoTexture.materialID(obj, 'MAVideoMat')
GameLogic.video = VideoTexture.Texture(obj, matID)
GameLogic.vidSrc = VideoTexture.VideoFFmpeg('trailer_400p.ogg')
# Streaming is also possible:
#GameLogic.vidSrc = VideoTexture.VideoFFmpeg('http://10.32.1.10/trailer_400p.ogg')
GameLogic.vidSrc.repeat = -1
# If the video dimensions are not a power of 2, scaling must be done before
# sending the texture to the GPU. This is done by default with gluScaleImage()
# but you can also use a faster, but less precise, scaling by setting scale
# to True. Best approach is to convert the video offline and set the dimensions right.
GameLogic.vidSrc.scale = True
# FFmpeg always delivers the video image upside down, so flipping is enabled automatically
#GameLogic.vidSrc.flip = True
if contr.getSensors()[0].isPositive():
GameLogic.video.source = GameLogic.vidSrc
GameLogic.vidSrc.play()
2. Texture refresh script:
obj = GameLogic.getCurrentController().getOwner()
if hasattr(GameLogic, 'video') != 0:
GameLogic.video.refresh(True)
You can download this demo here:
http://home.scarlet.be/~tsi46445/blender/VideoTextureDemo.blendhttp://home.scarlet.be/~tsi46445/blender/trailer_400p.ogg
Rename PHY_GetActiveScene() to KX_GetActiveScene(): more logical name
Add KX_GetActiveEngine()
new KX_KetsjiEngine::GetClockTime(void) to return current
render frame time: if the CPU does not keep up with the
frame rate, up to 5 consecutive logic frames are processed
between each render frame, so that the logic system stays
accurate even if the graphic system is slow. For the video
texture module, it is important to stay in sync with the
render frame: no need to update the texture for logic frame.
BL_Texture::swapTexture(): texture id manipulation
BL_Texture::getTex() : return material texture
Enable video support in ffmpeg for Linux.
rayCast(to,from,dist,prop,face,xray,poly):
The face paremeter determines the orientation of the normal:
0 or omitted => hit normal is always oriented towards the ray origin (as if you casted the ray from outside)
1 => hit normal is the real face normal (only for mesh object, otherwise face has no effect)
The ray has X-Ray capability if xray parameter is 1, otherwise the first object hit (other than self object) stops the ray.
The prop and xray parameters interact as follow:
prop off, xray off: return closest hit or no hit if there is no object on the full extend of the ray.
prop off, xray on : idem.
prop on, xray off: return closest hit if it matches prop, no hit otherwise.
prop on, xray on : return closest hit matching prop or no hit if there is no object matching prop on the full extend of the ray.
if poly is 0 or omitted, returns a 3-tuple with object reference, hit point and hit normal or (None,None,None) if no hit.
if poly is 1, returns a 4-tuple with in addition a KX_PolyProxy as 4th element.
The KX_PolyProxy object holds information on the polygon hit by the ray: the index of the vertex forming the poylgon, material, etc.
Attributes (read-only):
matname: The name of polygon material, empty if no material.
material: The material of the polygon
texture: The texture name of the polygon.
matid: The material index of the polygon, use this to retrieve vertex proxy from mesh proxy
v1: vertex index of the first vertex of the polygon, use this to retrieve vertex proxy from mesh proxy
v2: vertex index of the second vertex of the polygon, use this to retrieve vertex proxy from mesh proxy
v3: vertex index of the third vertex of the polygon, use this to retrieve vertex proxy from mesh proxy
v4: vertex index of the fourth vertex of the polygon, 0 if polygon has only 3 vertex
use this to retrieve vertex proxy from mesh proxy
visible: visible state of the polygon: 1=visible, 0=invisible
collide: collide state of the polygon: 1=receives collision, 0=collision free.
Methods:
getMaterialName(): Returns the polygon material name with MA prefix
getMaterial(): Returns the polygon material
getTextureName(): Returns the polygon texture name
getMaterialIndex(): Returns the material bucket index of the polygon.
getNumVertex(): Returns the number of vertex of the polygon.
isVisible(): Returns whether the polygon is visible or not
isCollider(): Returns whether the polygon is receives collision or not
getVertexIndex(vertex): Returns the mesh vertex index of a polygon vertex
getMesh(): Returns a mesh proxy
New methods of KX_MeshProxy have been implemented to retrieve KX_PolyProxy objects:
getNumPolygons(): Returns the number of polygon in the mesh.
getPolygon(index): Gets the specified polygon from the mesh.
More details in PyDoc.
The root cause of this bug is the fact that Bullet shapes
are shared between duplicated game objects. As the physics
object scale is stored in the shape, all duplicas must
have the same scale otherwise the physics representation
is incorrect.
This fix introduces a mechanism to duplicate shapes at
runtime so that Bullet shapes are not shared anymore.
The drawback is an increased memory consuption.
A reference count mechanism will be introduced in a
later revision to keep Bullet shape shared between
duplicas that have the same scale.
Introduction of a new Delay sensor that can be used to
generate positive and negative triggers at precise time,
expressed in number of frames.
The delay parameter defines the length of the initial
OFF period. A positive trigger is generated at the end
of this period. The duration parameter defines the
length of the ON period following the OFF period.
A negative trigger is generated at the end of the ON period.
If duration is 0, the sensor stays ON and there is no
negative trigger.
The sensor runs the OFF-ON cycle once unless the repeat
option is set: the OFF-ON cycle repeats indefinately
(or the OFF cycle if duration is 0).
The new generic SCA_ISensor::reset() Python function
can be used at any time to restart the sensor: the
current cycle is interrupted and no trigger is generated.
New Add mode for Ipo actuator
=============================
A new Add button, mutually exclusive with Force button, is available in
the Ipo actuator. When selected, it activates the Add mode that consists
in adding the Ipo curve to the current object situation in world
coordinates, or parent coordinates if the object has a parent. Scale Ipo
curves are multiplied instead of added to the object current scale.
If the local flag is selected, the Ipo curve is added (multiplied) in
the object's local coordinates.
Delta Ipo curves are handled identically to normal Ipo curve and there
is no need to work with Delta Ipo curves provided that you make sure
that the Ipo curve starts from origin. Origin means location 0 for
Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for
Scale Ipo curve.
The "current object situation" means the object's location, rotation
and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo
actuators, this means at the start of each loop. This initial state is
used as a base during the execution of the Ipo Curve but when the Ipo
curve is restarted (later or immediately in case of Loop mode), the
object current situation at that time is used as the new base.
For reference, here is the exact operation of the Add mode for each
type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale
and orientation matrix at the start of the curve; iLoc, iRot, iScale,
iMat: Ipo curve loc/rot/scale and orientation matrix resulting from
the rotation).
Location
Local=false: newLoc = oLoc+iLoc
Local=true : newLoc = oLoc+oScale*(oMat*iLoc)
Rotation
Local=false: newMat = iMat*oMat
Local=true : newMat = oMat*iMat
Scale
Local=false: newScale = oScale*iScale
Local=true : newScale = oScale*iScale
Add+Local mode is very useful to have dynamic object executing complex
movement relative to their current location/orientation. Of cource,
dynamics should be disabled during the execution of the curve.
Several corrections in state system
===================================
- Object initial state is taken into account when adding object
dynamically
- Fix bug with link count when adding object dynamically
- Fix false on-off detection for Actuator sensor when actuator is
trigged on negative event.
- Fix Parent actuator false activation on negative event
- Loop Ipo curve not restarting at correct frame when start frame is
different from one.
General
=======
- Removal of Damp option in motion actuator (replaced by
Servo control motion).
- No PyDoc at present, will be added soon.
Generalization of the Lvl option
================================
A sensor with the Lvl option selected will always produce an
event at the start of the game or when entering a state or at
object creation. The event will be positive or negative
depending of the sensor condition. A negative pulse makes
sense when used with a NAND controller: it will be converted
into an actuator activation.
Servo control motion
====================
A new variant of the motion actuator allows to control speed
with force. The control if of type "PID" (Propotional, Integral,
Derivate): the force is automatically adapted to achieve the
target speed. All the parameters of the servo controller are
configurable. The result is a great variety of motion style:
anysotropic friction, flying, sliding, pseudo Dloc...
This actuator should be used in preference to Dloc and LinV
as it produces more fluid movements and avoids the collision
problem with Dloc.
LinV : target speed as (X,Y,Z) vector in local or world
coordinates (mostly useful in local coordinates).
Limit: the force can be limited along each axis (in the same
coordinates of LinV). No limitation means that the force
will grow as large as necessary to achieve the target
speed along that axis. Set a max value to limit the
accelaration along an axis (slow start) and set a min
value (negative) to limit the brake force.
P: Proportional coefficient of servo controller, don't set
directly unless you know what you're doing.
I: Integral coefficient of servo controller. Use low value
(<0.1) for slow reaction (sliding), high values (>0.5)
for hard control. The P coefficient will be automatically
set to 60 times the I coefficient (a reasonable value).
D: Derivate coefficient. Leave to 0 unless you know what
you're doing. High values create instability.
Notes: - This actuator works perfectly in zero friction
environment: the PID controller will simulate friction
by applying force as needed.
- This actuator is compatible with simple Drot motion
actuator but not with LinV and Dloc motion.
- (0,0,0) is a valid target speed.
- All parameters are accessible through Python.
Distance constraint actuator
============================
A new variant of the constraint actuator allows to set the
distance and orientation relative to a surface. The controller
uses a ray to detect the surface (or any object) and adapt the
distance and orientation parallel to the surface.
Damp: Time constant (in nb of frames) of distance and
orientation control.
Dist: Select to enable distance control and set target
distance. The object will be position at the given
distance of surface along the ray direction.
Direction: chose a local axis as the ray direction.
Range: length of ray. Objecgt within this distance will be
detected.
N : Select to enable orientation control. The actuator will
change the orientation and the location of the object
so that it is parallel to the surface at the vertical
of the point of contact of the ray.
M/P : Select to enable material detection. Default is property
detection.
Property/Material: name of property/material that the target of
ray must have to be detected. If not set, property/
material filter is disabled and any collisioning object
within range will be detected.
PER : Select to enable persistent operation. Normally the
actuator disables itself automatically if the ray does
not reach a valid target.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
rotDamp: Time constant (in nb of frame) of orientation control.
0 : use Damp parameter.
>0: use a different time constant for orientation.
Notes: - If neither N nor Dist options are set, the actuator
does not change the position and orientation of the
object; it works as a ray sensor.
- The ray has no "X-ray" capability: if the first object
hit does not have the required property/material, it
returns no hit and the actuator disables itself unless
PER option is enabled.
- This actuator changes the position and orientation but
not the speed of the object. This has an important
implication in a gravity environment: the gravity will
cause the speed to increase although the object seems
to stay still (it is repositioned at each frame).
The gravity must be compensated in one way or another.
the new servo control motion actuator is the simplest
way: set the target speed along the ray axis to 0
and the servo control will automatically compensate
the gravity.
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is
placed BEFORE the Drot motion actuator (the order of
actuator is important)
- All parameters are accessible through Python.
Orientation constraint
======================
A new variant of the constraint actuator allows to align an
object axis along a global direction.
Damp : Time constant (in nb of frames) of orientation control.
X,Y,Z: Global coordinates of reference direction.
time : Maximum activation time of actuator.
0 : unlimited.
>0: number of frames before automatic deactivation.
Notes: - (X,Y,Z) = (0,0,0) is not a valid direction
- This actuator changes the orientation of the object
and will conflict with Drot motion unless it is placed
BEFORE the Drot motion actuator (the order of
actuator is important).
- This actuator doesn't change the location and speed.
It is compatible with gravity.
- All parameters are accessible through Python.
Actuator sensor
===============
This sensor detects the activation and deactivation of actuators
of the same object. The sensor generates a positive pulse when
the corresponding sensor is activated and a negative pulse when
it is deactivated (the contrary if the Inv option is selected).
This is mostly useful to chain actions and to detect the loss of
contact of the distance motion actuator.
Notes: - Actuators are disabled at the start of the game; if you
want to detect the On-Off transition of an actuator
after it has been activated at least once, unselect the
Lvl and Inv options and use a NAND controller.
- Some actuators deactivates themselves immediately after
being activated. The sensor detects this situation as
an On-Off transition.
- The actuator name can be set through Python.
NAND controller is an inverted AND controller: the output is
1 if any of the input is 0.
NOR controller is an inverted OR controller: the output is 0
if any of the input is 1.
XOR controller is an exclusive OR: the output is 1 if and only
if one input is 1 and all the other inputs are 0.
XNOR controller is an inverted XOR: the output is 0 if and only
if one input is 0 and all the other inputs are 0.
The NAND, NORT and XNOR controllers are very usefull to create
complementary outputs to start and stop actuators synchronously.
MSCV project files updated.
This patch introduces a simple state engine system with the logic bricks. This system features full
backward compatibility, multiple active states, multiple state transitions, automatic disabling of
sensor and actuators, full GUI support and selective display of sensors and actuators.
Note: Python API is available but not documented yet. It will be added asap.
State internals
===============
The state system is object based. The current state mask is stored in the object as a 32 bit value;
each bit set in the mask is an active state. The controllers have a state mask too but only one bit
can be set: a controller belongs to a single state. The game engine will only execute controllers
that belong to active states. Sensors and actuators don't have a state mask but are effectively
attached to states via their links to the controllers. Sensors and actuators can be connected to more
than one state. When a controller becomes inactive because of a state change, its links to sensors
and actuators are temporarily broken (until the state becomes active again). If an actuator gets isolated,
i.e all the links to controllers are broken, it is automatically disabled. If a sensor gets isolated,
the game engine will stop calling it to save CPU. It will also reset the sensor internal state so that
it can react as if the game just started when it gets reconnected to an active controller. For example,
an Always sensor in no pulse mode that is connected to a single state (i.e connected to one or more
controllers of a single state) will generate a pulse each time the state becomes active. This feature is
not available on all sensors, see the notes below.
GUI
===
This system system is fully configurable through the GUI: the object state mask is visible under the
object bar in the controller's colum as an array of buttons just like the 3D view layer mask.
Click on a state bit to only display the controllers of that state. You can select more than one state
with SHIFT-click. The All button sets all the bits so that you can see all the controllers of the object.
The Ini button sets the state mask back to the object default state. You can change the default state
of object by first selecting the desired state mask and storing using the menu under the State button.
If you define a default state mask, it will be loaded into the object state make when you load the blend
file or when you run the game under the blenderplayer. However, when you run the game under Blender,
the current selected state mask will be used as the startup state for the object. This allows you to test
specific state during the game design.
The controller display the state they belong to with a new button in the controller header. When you add
a new controller, it is added by default in the lowest enabled state. You can change the controller state
by clicking on the button and selecting another state. If more than one state is enabled in the object
state mask, controllers are grouped by state for more readibility.
The new Sta button in the sensor and actuator column header allows you to display only the sensors and
actuators that are linked to visible controllers.
A new state actuator is available to modify the state during the game. It defines a bit mask and
the operation to apply on the current object state mask:
Cpy: the bit mask is copied to the object state mask.
Add: the bits that set in the bit mask will be turned on in the object state mask.
Sub: the bits that set in the bit mask will be turned off in the object state mask.
Inv: the bits that set in the bit mask will be inverted in the objecyy state mask.
Notes
=====
- Although states have no name, a simply convention consists in using the name of the first controller
of the state as the state name. The GUI will support that convention by displaying as a hint the name
of the first controller of the state when you move the mouse over a state bit of the object state mask
or of the state actuator bit mask.
- Each object has a state mask and each object can have a state engine but if several objects are
part of a logical group, it is recommended to put the state engine only in the main object and to
link the controllers of that object to the sensors and actuators of the different objects.
- When loading an old blend file, the state mask of all objects and controllers are initialized to 1
so that all the controllers belong to this single state. This ensures backward compatibility with
existing game.
- When the state actuator is activated at the same time as other actuators, these actuators are
guaranteed to execute before being eventually disabled due to the state change. This is useful for
example to send a message or update a property at the time of changing the state.
- Sensors that depend on underlying resource won't reset fully when they are isolated. By the time they
are acticated again, they will behave as follow:
* keyboard sensor: keys already pressed won't be detected. The keyboard sensor is only sensitive
to new key press.
* collision sensor: objects already colliding won't be detected. Only new collisions are
detected.
* near and radar sensor: same as collision sensor.
Shape Action are now supported in the BGE. A new type of actuator "Shape Action" is available on mesh objects. It can be combined with Action actuator on parent armature. Only relative keys are supported. All the usual action options are available: type, blending, priority, Python API. Only actions with shape channels should be specified of course, otherwise the actuator has no effect. Shape action will still work after a mesh replacement provided that the new mesh has compatible shape keys.
This patch consists in new KX_GameObject::SetParent() and KX_GameObject::RemoveParent() functions to create and destroy parent relation during game. These functions are accessible through python and through a new actuator KX_ParentActuator. Function documentation in PyDoc.
The object keeps its orientation, position and scale when it is parented but will further rotate, move and scale with its parent from that point on. When the parent relation is broken, the object keeps the orientation, position and scale it had at that time.
The function has no effect if any of the X/Y/Z scale of the object or its new parent are below Epsilon.
This code adds a basic and simple skeleton generator.
Examples and links are in the wiki, docs will come eventually: http://wiki.blender.org/index.php/User:Theeth/skeletor
In a nutshell, select a vertex at the top of the head and press "Generate Skeleton". UI Panel is in the Editing buttons in Edit Mode, tooltips and semi-useful.
