blender/source/gameengine/Ketsji/KX_PolygonMaterial.cpp

414 lines
11 KiB
C++
Raw Normal View History

/*
* $Id$
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
* ***** END GPL LICENSE BLOCK *****
*/
2011-02-25 13:35:59 +00:00
/** \file gameengine/Ketsji/KX_PolygonMaterial.cpp
* \ingroup ketsji
*/
#include <stddef.h>
#include "KX_PolygonMaterial.h"
#include "BKE_mesh.h"
#include "BKE_global.h"
#include "BKE_image.h"
#include "DNA_material_types.h"
#include "DNA_texture_types.h"
#include "DNA_image_types.h"
Added custom vertex/edge/face data for meshes: All data layers, including MVert/MEdge/MFace, are now managed as custom data layers. The pointers like Mesh.mvert, Mesh.dvert or Mesh.mcol are still used of course, but allocating, copying or freeing these arrays should be done through the CustomData API. Work in progress documentation on this is here: http://mediawiki.blender.org/index.php/BlenderDev/BlenderArchitecture/CustomData Replaced TFace by MTFace: This is the same struct, except that it does not contain color, that now always stays separated in MCol. This was not a good design decision to begin with, and it is needed for adding multiple color layers later. Note that this does mean older Blender versions will not be able to read UV coordinates from the next release, due to an SDNA limitation. Removed DispListMesh: This now fully replaced by DerivedMesh. To provide access to arrays of vertices, edges and faces, like DispListMesh does. The semantics of the DerivedMesh.getVertArray() and similar functions were changed to return a pointer to an array if one exists, or otherwise allocate a temporary one. On releasing the DerivedMesh, this temporary array will be removed automatically. Removed ssDM and meshDM DerivedMesh backends: The ssDM backend was for DispListMesh, so that became obsolete automatically. The meshDM backend was replaced by the custom data backend, that now figures out which layers need to be modified, and only duplicates those. This changes code in many places, and overall removes 2514 lines of code. So, there's a good chance this might break some stuff, although I've been testing it for a few days now. The good news is, adding multiple color and uv layers should now become easy.
2006-11-20 04:28:02 +00:00
#include "DNA_meshdata_types.h"
#include "IMB_imbuf_types.h"
#include "GPU_draw.h"
#include "MEM_guardedalloc.h"
#include "RAS_LightObject.h"
#include "RAS_MaterialBucket.h"
#include "KX_PyMath.h"
#define KX_POLYGONMATERIAL_CAPSULE_ID "KX_POLYGONMATERIAL_PTR"
KX_PolygonMaterial::KX_PolygonMaterial()
: PyObjectPlus(),
RAS_IPolyMaterial(),
m_tface(NULL),
m_mcol(NULL),
m_material(NULL),
#ifdef WITH_PYTHON
m_pymaterial(NULL),
#endif
m_pass(0)
{
}
void KX_PolygonMaterial::Initialize(
const STR_String &texname,
Material* ma,
int materialindex,
int tile,
int tilexrep,
int tileyrep,
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
int alphablend,
bool alpha,
bool zsort,
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
bool light,
int lightlayer,
struct MTFace* tface,
unsigned int* mcol)
{
RAS_IPolyMaterial::Initialize(
texname,
ma?ma->id.name:"",
materialindex,
tile,
tilexrep,
tileyrep,
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
alphablend,
alpha,
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
zsort,
light,
(texname && texname != ""?true:false), /* if we have a texture we have image */
ma?&ma->game:NULL);
m_tface = tface;
m_mcol = mcol;
m_material = ma;
#ifdef WITH_PYTHON
m_pymaterial = 0;
#endif
m_pass = 0;
}
KX_PolygonMaterial::~KX_PolygonMaterial()
{
#ifdef WITH_PYTHON
if (m_pymaterial)
{
Py_DECREF(m_pymaterial);
}
#endif // WITH_PYTHON
}
Image *KX_PolygonMaterial::GetBlenderImage() const
{
return (m_tface) ? m_tface->tpage : NULL;
}
bool KX_PolygonMaterial::Activate(RAS_IRasterizer* rasty, TCachingInfo& cachingInfo) const
{
bool dopass = false;
#ifdef WITH_PYTHON
if (m_pymaterial)
{
PyObject *pyRasty = PyCapsule_New((void*)rasty, KX_POLYGONMATERIAL_CAPSULE_ID, NULL); /* new reference */
PyObject *pyCachingInfo = PyCapsule_New((void*) &cachingInfo, KX_POLYGONMATERIAL_CAPSULE_ID, NULL); /* new reference */
PyObject *ret = PyObject_CallMethod(m_pymaterial, (char *)"activate", (char *)"(NNO)", pyRasty, pyCachingInfo, (PyObject*) this->m_proxy);
if (ret)
{
bool value = PyLong_AsSsize_t(ret);
Py_DECREF(ret);
dopass = value;
}
else
{
PyErr_Print();
PyErr_Clear();
PySys_SetObject( (char *)"last_traceback", NULL);
}
}
else
#endif // WITH_PYTHON
{
switch (m_pass++)
{
case 0:
DefaultActivate(rasty, cachingInfo);
dopass = true;
break;
default:
m_pass = 0;
dopass = false;
break;
}
}
return dopass;
}
void KX_PolygonMaterial::DefaultActivate(RAS_IRasterizer* rasty, TCachingInfo& cachingInfo) const
{
if (GetCachingInfo() != cachingInfo)
{
if (!cachingInfo)
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
GPU_set_tpage(NULL, 0, 0);
cachingInfo = GetCachingInfo();
if ((m_drawingmode & RAS_IRasterizer::KX_TEX)&& (rasty->GetDrawingMode() == RAS_IRasterizer::KX_TEXTURED))
{
Image *ima = (Image*)m_tface->tpage;
GPU_update_image_time(ima, rasty->GetTime());
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
GPU_set_tpage(m_tface, 1, m_alphablend);
}
else
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
GPU_set_tpage(NULL, 0, 0);
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
if(m_drawingmode & RAS_IRasterizer::KX_BACKCULL)
rasty->SetCullFace(true);
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
else
rasty->SetCullFace(false);
if ((m_drawingmode & RAS_IRasterizer::KX_LINES) ||
2011-09-03 02:15:49 +00:00
(rasty->GetDrawingMode() <= RAS_IRasterizer::KX_WIREFRAME))
rasty->SetLines(true);
else
rasty->SetLines(false);
rasty->SetSpecularity(m_specular[0],m_specular[1],m_specular[2],m_specularity);
rasty->SetShinyness(m_shininess);
rasty->SetDiffuse(m_diffuse[0], m_diffuse[1],m_diffuse[2], 1.0);
if (m_material)
rasty->SetPolygonOffset(-m_material->zoffs, 0.0);
}
//rasty->SetSpecularity(m_specular[0],m_specular[1],m_specular[2],m_specularity);
//rasty->SetShinyness(m_shininess);
//rasty->SetDiffuse(m_diffuse[0], m_diffuse[1],m_diffuse[2], 1.0);
//if (m_material)
// rasty->SetPolygonOffset(-m_material->zoffs, 0.0);
}
void KX_PolygonMaterial::GetMaterialRGBAColor(unsigned char *rgba) const
{
if (m_material) {
*rgba++ = (unsigned char) (m_material->r*255.0);
*rgba++ = (unsigned char) (m_material->g*255.0);
*rgba++ = (unsigned char) (m_material->b*255.0);
*rgba++ = (unsigned char) (m_material->alpha*255.0);
} else
RAS_IPolyMaterial::GetMaterialRGBAColor(rgba);
}
#ifdef WITH_PYTHON
//----------------------------------------------------------------------------
//Python
PyMethodDef KX_PolygonMaterial::Methods[] = {
KX_PYMETHODTABLE(KX_PolygonMaterial, setCustomMaterial),
KX_PYMETHODTABLE(KX_PolygonMaterial, updateTexture),
KX_PYMETHODTABLE(KX_PolygonMaterial, setTexture),
KX_PYMETHODTABLE(KX_PolygonMaterial, activate),
// KX_PYMETHODTABLE(KX_PolygonMaterial, setPerPixelLights),
{NULL,NULL} //Sentinel
};
PyAttributeDef KX_PolygonMaterial::Attributes[] = {
KX_PYATTRIBUTE_RO_FUNCTION("texture", KX_PolygonMaterial, pyattr_get_texture),
KX_PYATTRIBUTE_RO_FUNCTION("material", KX_PolygonMaterial, pyattr_get_material), /* should probably be .name ? */
KX_PYATTRIBUTE_INT_RW("tile", INT_MIN, INT_MAX, true, KX_PolygonMaterial, m_tile),
KX_PYATTRIBUTE_INT_RW("tilexrep", INT_MIN, INT_MAX, true, KX_PolygonMaterial, m_tilexrep),
KX_PYATTRIBUTE_INT_RW("tileyrep", INT_MIN, INT_MAX, true, KX_PolygonMaterial, m_tileyrep),
KX_PYATTRIBUTE_INT_RW("drawingmode", INT_MIN, INT_MAX, true, KX_PolygonMaterial, m_drawingmode),
//KX_PYATTRIBUTE_INT_RW("lightlayer", INT_MIN, INT_MAX, true, KX_PolygonMaterial, m_lightlayer),
KX_PYATTRIBUTE_BOOL_RW("transparent", KX_PolygonMaterial, m_alpha),
KX_PYATTRIBUTE_BOOL_RW("zsort", KX_PolygonMaterial, m_zsort),
KX_PYATTRIBUTE_FLOAT_RW("shininess", 0.0f, 1000.0f, KX_PolygonMaterial, m_shininess),
KX_PYATTRIBUTE_FLOAT_RW("specularity", 0.0f, 1000.0f, KX_PolygonMaterial, m_specularity),
KX_PYATTRIBUTE_RW_FUNCTION("diffuse", KX_PolygonMaterial, pyattr_get_diffuse, pyattr_set_diffuse),
KX_PYATTRIBUTE_RW_FUNCTION("specular",KX_PolygonMaterial, pyattr_get_specular, pyattr_set_specular),
KX_PYATTRIBUTE_RO_FUNCTION("tface", KX_PolygonMaterial, pyattr_get_tface), /* How the heck is this even useful??? - Campbell */
KX_PYATTRIBUTE_RO_FUNCTION("gl_texture", KX_PolygonMaterial, pyattr_get_gl_texture), /* could be called 'bindcode' */
/* triangle used to be an attribute, removed for 2.49, nobody should be using it */
{ NULL } //Sentinel
};
PyTypeObject KX_PolygonMaterial::Type = {
PyVarObject_HEAD_INIT(NULL, 0)
2009-08-10 00:07:34 +00:00
"KX_PolygonMaterial",
sizeof(PyObjectPlus_Proxy),
0,
py_base_dealloc,
0,
0,
0,
0,
py_base_repr,
0,0,0,0,0,0,0,0,0,
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE,
0,0,0,0,0,0,0,
Methods,
0,
0,
&PyObjectPlus::Type,
0,0,0,0,0,0,
py_base_new
};
KX_PYMETHODDEF_DOC(KX_PolygonMaterial, setCustomMaterial, "setCustomMaterial(material)")
{
PyObject *material;
if (PyArg_ParseTuple(args, "O:setCustomMaterial", &material))
{
if (m_pymaterial) {
Py_DECREF(m_pymaterial);
}
m_pymaterial = material;
Py_INCREF(m_pymaterial);
Py_RETURN_NONE;
}
return NULL;
}
KX_PYMETHODDEF_DOC(KX_PolygonMaterial, updateTexture, "updateTexture(tface, rasty)")
{
PyObject *pyrasty, *pytface;
if (PyArg_ParseTuple(args, "O!O!:updateTexture", &PyCapsule_Type, &pytface, &PyCapsule_Type, &pyrasty))
{
MTFace *tface = (MTFace*) PyCapsule_GetPointer(pytface, KX_POLYGONMATERIAL_CAPSULE_ID);
RAS_IRasterizer *rasty = (RAS_IRasterizer*) PyCapsule_GetPointer(pyrasty, KX_POLYGONMATERIAL_CAPSULE_ID);
Image *ima = (Image*)tface->tpage;
GPU_update_image_time(ima, rasty->GetTime());
Py_RETURN_NONE;
}
return NULL;
}
KX_PYMETHODDEF_DOC(KX_PolygonMaterial, setTexture, "setTexture(tface)")
{
PyObject *pytface;
if (PyArg_ParseTuple(args, "O!:setTexture", &PyCapsule_Type, &pytface))
{
MTFace *tface = (MTFace*) PyCapsule_GetPointer(pytface, KX_POLYGONMATERIAL_CAPSULE_ID);
TexFace to Material Settings big patch Summary: ======== The idea here is to move the texface options into the material panel. For images with the change please visit: http://code.blender.org/index.php/2011/09/bge-material-texface-changes 1 - Some of the legacy problems 2.49 and 2.5x has with the texface system: ========================================================================== 1.1) Shadow, Bilboard and Halo are mutual exclusive (in the code), yet you can select a face to be more than one mode. 1.2) Sort only works for blend Alpha yet it's an option regardless of the Transparency Blend you pick. 1.3) Shared doesn't affect anything in BGE. 1.4) ObColor only works for Text objects (old bitmap texts) when using Texture Face Materials. (not address yet, I so far ignored obcolor) 2 - Notes: ============ 2.1) Now "Use Face Textures" in material Option panel will work in Multitexture even if there is no texture channel. 2.2) In FaceTexture mode it will use TexFace all the time, even if you don't check the "Use Texture Face" option in the UI. It's a matter of decision, since the code for either way is there. I decided by the solution that makes the creation of a material fast - in this mode the user doesn't need to mess with textures or this "Use Texture Face" option at all. I'm not strong in my opinion here. But I think if we don't have this then what is the point of the Texture Face mode? 2.3) I kept references for tface only when we need the image, UV or the tiling setting. It should help later when/if we split the Image and UV layers from the tface struct (Campbell and Brecht proposal). 3 - Changes in a Nutshell: ========================== 3.1) "Texture Face" panel (in the Mesh/Object Data panel) no longer exists. Those settings are all part of the material properties, visible when Game Render is set. 3.2) "Texture Face" Shading mode (in the Render panel) is now called “Single Texture”, it needs a material for special settings (e.g. Billboard, Alpha Sort, …). 3.3) New options in the Material Panel * Shadeless option in the Material panel is now supported for all three Shading modes. * Physics is now toggleable, this is the old Collision option. * Two Side (on) is now called Back Culling (off). * Alpha Sort is one of the Alpha options, together (and mutually exclusive) to Alpha Blend, Alpha Clip, Add and Opaque (i.e. solid). * Shadow, Billboard and Halo are grouped in the “Face Orientation” property. * "Face Textures" and "Face Textures Alpha" (under Options) can be used for all but GLSL shading mode (to be supported in GLSL eventually). * The backend in the game engine is still the same as before. The only changes are in the interface and in the way you need to think your materials. The bottomline is: It’s no longer possible to share materials between faces that do not share the same game properties. 4 - Acknowledgment: ================== Mike Pan for the design discussions, and testing along the whole development process. Vitor Balbio for the first hands-on code with the interface changes. That helped me a lot to push me into work on that. Benoit Bolsee and Brecht van Lommel for patch review (* no one reviewed the whole patch, or the latest iteractions, so I still hold liability for any problems). Blender artists that gave feedback and helped testing the patch. Patch review and original documentation can be found here: http://wiki.blender.org/index.php/User:Dfelinto/TexFace http://codereview.appspot.com/4289041/
2011-09-19 19:55:59 +00:00
GPU_set_tpage(tface, 1, m_alphablend);
Py_RETURN_NONE;
}
return NULL;
}
KX_PYMETHODDEF_DOC(KX_PolygonMaterial, activate, "activate(rasty, cachingInfo)")
{
PyObject *pyrasty, *pyCachingInfo;
if (PyArg_ParseTuple(args, "O!O!:activate", &PyCapsule_Type, &pyrasty, &PyCapsule_Type, &pyCachingInfo))
{
RAS_IRasterizer *rasty = static_cast<RAS_IRasterizer*>(PyCapsule_GetPointer(pyrasty, KX_POLYGONMATERIAL_CAPSULE_ID));
TCachingInfo *cachingInfo = static_cast<TCachingInfo*>(PyCapsule_GetPointer(pyCachingInfo, KX_POLYGONMATERIAL_CAPSULE_ID));
if (rasty && cachingInfo)
{
DefaultActivate(rasty, *cachingInfo);
Py_RETURN_NONE;
}
}
return NULL;
}
PyObject* KX_PolygonMaterial::pyattr_get_texture(void *self_v, const KX_PYATTRIBUTE_DEF *attrdef)
{
KX_PolygonMaterial* self= static_cast<KX_PolygonMaterial*>(self_v);
return PyUnicode_FromString(self->m_texturename.ReadPtr());
}
PyObject* KX_PolygonMaterial::pyattr_get_material(void *self_v, const KX_PYATTRIBUTE_DEF *attrdef)
{
KX_PolygonMaterial* self= static_cast<KX_PolygonMaterial*>(self_v);
return PyUnicode_FromString(self->m_materialname.ReadPtr());
}
/* this does not seem useful */
PyObject* KX_PolygonMaterial::pyattr_get_tface(void *self_v, const KX_PYATTRIBUTE_DEF *attrdef)
{
KX_PolygonMaterial* self= static_cast<KX_PolygonMaterial*>(self_v);
return PyCapsule_New(self->m_tface, KX_POLYGONMATERIAL_CAPSULE_ID, NULL);
}
PyObject* KX_PolygonMaterial::pyattr_get_gl_texture(void *self_v, const KX_PYATTRIBUTE_DEF *attrdef)
{
KX_PolygonMaterial* self= static_cast<KX_PolygonMaterial*>(self_v);
int bindcode= 0;
if (self->m_tface && self->m_tface->tpage)
bindcode= self->m_tface->tpage->bindcode;
return PyLong_FromSsize_t(bindcode);
}
PyObject* KX_PolygonMaterial::pyattr_get_diffuse(void *self_v, const KX_PYATTRIBUTE_DEF *attrdef)
{
KX_PolygonMaterial* self= static_cast<KX_PolygonMaterial*>(self_v);
return PyObjectFrom(self->m_diffuse);
}
int KX_PolygonMaterial::pyattr_set_diffuse(void *self_v, const KX_PYATTRIBUTE_DEF *attrdef, PyObject *value)
{
KX_PolygonMaterial* self= static_cast<KX_PolygonMaterial*>(self_v);
MT_Vector3 vec;
if (!PyVecTo(value, vec))
return PY_SET_ATTR_FAIL;
self->m_diffuse= vec;
return PY_SET_ATTR_SUCCESS;
}
PyObject* KX_PolygonMaterial::pyattr_get_specular(void *self_v, const KX_PYATTRIBUTE_DEF *attrdef)
{
KX_PolygonMaterial* self= static_cast<KX_PolygonMaterial*>(self_v);
return PyObjectFrom(self->m_specular);
}
int KX_PolygonMaterial::pyattr_set_specular(void *self_v, const KX_PYATTRIBUTE_DEF *attrdef, PyObject *value)
{
KX_PolygonMaterial* self= static_cast<KX_PolygonMaterial*>(self_v);
MT_Vector3 vec;
if (!PyVecTo(value, vec))
return PY_SET_ATTR_FAIL;
self->m_specular= vec;
return PY_SET_ATTR_SUCCESS;
}
#endif // WITH_PYTHON