kannonier8/blender
1
0
Fork 0
forked from bartvdbraak/blender
Code Pull Requests Activity
5438440483
blender/source/gameengine/Ketsji/KX_IPO_SGController.cpp

384 lines
13 KiB
C++
Raw Normal View History

Initial revision
2002-10-12 11:37:38 +00:00
/**
* $Id$
*
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* ***** BEGIN GPL LICENSE BLOCK *****
Initial revision
2002-10-12 11:37:38 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* of the License, or (at your option) any later version.
Initial revision
2002-10-12 11:37:38 +00:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
Patch from GSR that a) fixes a whole bunch of GPL/BL license blocks that were previously missed; and b) greatly increase my ohloh stats!
2008-04-16 22:40:48 +00:00
* ***** END GPL LICENSE BLOCK *****
Initial revision
2002-10-12 11:37:38 +00:00
* Scenegraph controller for ipos.
*/
Last of the config.h mods... #ifdef HAVE_CONFIG_H #include <config.h> #endif added to these files. Kent -- mein@cs.umn.edu
2002-11-25 15:29:57 +00:00
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
applied the 64-bit pointer patch submitted by Ken Hughes
2005-11-28 06:51:54 +00:00
#if defined(_WIN64)
typedef unsigned __int64 uint_ptr;
#else
typedef unsigned long uint_ptr;
#endif
Initial revision
2002-10-12 11:37:38 +00:00
#ifdef WIN32
// This warning tells us about truncation of __long__ stl-generated names.
// It can occasionally cause DevStudio to have internal compiler warnings.
#pragma warning( disable : 4786 )
#endif
#include "KX_IPO_SGController.h"
#include "KX_ScalarInterpolator.h"
#include "KX_GameObject.h"
[GameEngine] Commit all Kester's changes made to the gameengine to restore 2.25 like physics. [SCons] Build with Solid as default when enabling the gameengine in the build process [SCons] Build solid and qhull from the extern directory and link statically against them That was about it. There are a few things that needs double checking: * Makefiles * Projectfiles * All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
2004-03-22 22:02:18 +00:00
#include "KX_IPhysicsController.h"
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
#include "DNA_ipo_types.h"
Math Lib * Convert all code to use new functions. * Branch maintainers may want to skip this commit, and run this conversion script instead, if they use a lot of math functions in new code: http://www.pasteall.org/9052/python
2009-11-10 20:43:45 +00:00
#include "BLI_math.h"
Initial revision
2002-10-12 11:37:38 +00:00
// All objects should start on frame 1! Will we ever need an object to
// start on another frame, the 1.0 should change.
KX_IpoSGController::KX_IpoSGController()
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
: m_ipo_as_force(false),
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
m_ipo_add(false),
m_ipo_local(false),
[GameEngine] Commit all Kester's changes made to the gameengine to restore 2.25 like physics. [SCons] Build with Solid as default when enabling the gameengine in the build process [SCons] Build solid and qhull from the extern directory and link statically against them That was about it. There are a few things that needs double checking: * Makefiles * Projectfiles * All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
2004-03-22 22:02:18 +00:00
m_modified(true),
BGE bug #17657 fixed: dRotY doesn't work properly after 90 degrees rotation. This problem is caused by discontinuities in the conversion orientation matrix -> euler angles: the angle sign can switch and thus the direction of the rotation produced by the dRot Ipo. To avoid this bug, the matrix->euler conversion must be avoided during the game. I took the following approach that is compatible with Blender (identical effect in the game and in the 3D view): - no change in Add mode: Rot and dRot are treated as additional rotation to the orientation at the start of the Ipo. There is no matrix->euler conversion and thus no discontinuities. - Rot Ipo are treated as absolute rotation. All 3 axis should be specified but if they are not, the startup object orientation will be used to set the unspecified axis. By doing a matrix-> euler conversion once at the start, the discontinuities are avoided. If there are also dRot curves, they are treated as delta of the corresponding Rot curve or startup angle. - dRot Ipo are treated as Add mode in Local axis. Note about Add mode: Rot and dRot curves are treated identically during the game. However, only dRot curves make sense because they don't interfere with the object orientation in the 3D view.
2008-09-23 20:07:15 +00:00
m_ipotime(1.0),
remove warnings for the BGE - variables that shadow vers declared earlier - Py_Fatal print an error to the stderr - gcc was complaining about the order of initialized vars (for classes) - const return values for ints and bools didnt do anything. - braces for ambiguous if statements
2009-02-25 03:26:02 +00:00
m_ipo_start_initialized(false),
BGE bug #17657 fixed: dRotY doesn't work properly after 90 degrees rotation. This problem is caused by discontinuities in the conversion orientation matrix -> euler angles: the angle sign can switch and thus the direction of the rotation produced by the dRot Ipo. To avoid this bug, the matrix->euler conversion must be avoided during the game. I took the following approach that is compatible with Blender (identical effect in the game and in the 3D view): - no change in Add mode: Rot and dRot are treated as additional rotation to the orientation at the start of the Ipo. There is no matrix->euler conversion and thus no discontinuities. - Rot Ipo are treated as absolute rotation. All 3 axis should be specified but if they are not, the startup object orientation will be used to set the unspecified axis. By doing a matrix-> euler conversion once at the start, the discontinuities are avoided. If there are also dRot curves, they are treated as delta of the corresponding Rot curve or startup angle. - dRot Ipo are treated as Add mode in Local axis. Note about Add mode: Rot and dRot curves are treated identically during the game. However, only dRot curves make sense because they don't interfere with the object orientation in the 3D view.
2008-09-23 20:07:15 +00:00
m_ipo_start_euler(0.0,0.0,0.0),
m_ipo_euler_initialized(false)
Initial revision
2002-10-12 11:37:38 +00:00
{
m_game_object = NULL;
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
for (int i=0; i < KX_MAX_IPO_CHANNELS; i++)
m_ipo_channels_active[i] = false;
Initial revision
2002-10-12 11:37:38 +00:00
}
void KX_IpoSGController::SetOption(
int option,
int value)
{
switch (option) {
case SG_CONTR_IPO_IPO_AS_FORCE:
m_ipo_as_force = (value != 0);
m_modified = true;
break;
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
case SG_CONTR_IPO_IPO_ADD:
m_ipo_add = (value != 0);
m_modified = true;
break;
case SG_CONTR_IPO_RESET:
if (m_ipo_start_initialized && value) {
m_ipo_start_initialized = false;
m_modified = true;
}
break;
case SG_CONTR_IPO_LOCAL:
if (value/* && ((SG_Node*)m_pObject)->GetSGParent() == NULL*/) {
// only accept local Ipo if the object has no parent
m_ipo_local = true;
} else {
m_ipo_local = false;
}
Initial revision
2002-10-12 11:37:38 +00:00
m_modified = true;
break;
default:
; /* just ignore the rest */
}
}
void
KX_IpoSGController::UpdateSumoReference(
)
{
if (m_game_object) {
Big patches: Erwin Coumans: Abstract the physics engine Charlie C: Joystick fixes Me: Moved the ray cast (shadows, mouse sensor & ray sensor)
2005-03-25 10:33:39 +00:00
Initial revision
2002-10-12 11:37:38 +00:00
}
}
void
KX_IpoSGController::SetGameObject(
KX_GameObject* go
)
{
m_game_object = go;
}
bool KX_IpoSGController::Update(double currentTime)
{
if (m_modified)
{
T_InterpolatorList::iterator i;
for (i = m_interpolators.begin(); !(i == m_interpolators.end()); ++i) {
(*i)->Execute(m_ipotime);//currentTime);
}
SG_Spatial* ob = (SG_Spatial*)m_pObject;
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
//initialization on the first frame of the IPO
if (! m_ipo_start_initialized && currentTime > 0.0) {
m_ipo_start_point = ob->GetLocalPosition();
m_ipo_start_orient = ob->GetLocalOrientation();
m_ipo_start_scale = ob->GetLocalScale();
m_ipo_start_initialized = true;
BGE bug #17657 fixed: dRotY doesn't work properly after 90 degrees rotation. This problem is caused by discontinuities in the conversion orientation matrix -> euler angles: the angle sign can switch and thus the direction of the rotation produced by the dRot Ipo. To avoid this bug, the matrix->euler conversion must be avoided during the game. I took the following approach that is compatible with Blender (identical effect in the game and in the 3D view): - no change in Add mode: Rot and dRot are treated as additional rotation to the orientation at the start of the Ipo. There is no matrix->euler conversion and thus no discontinuities. - Rot Ipo are treated as absolute rotation. All 3 axis should be specified but if they are not, the startup object orientation will be used to set the unspecified axis. By doing a matrix-> euler conversion once at the start, the discontinuities are avoided. If there are also dRot curves, they are treated as delta of the corresponding Rot curve or startup angle. - dRot Ipo are treated as Add mode in Local axis. Note about Add mode: Rot and dRot curves are treated identically during the game. However, only dRot curves make sense because they don't interfere with the object orientation in the 3D view.
2008-09-23 20:07:15 +00:00
if (!m_ipo_euler_initialized) {
// do it only once to avoid angle discontinuities
m_ipo_start_orient.getEuler(m_ipo_start_euler[0], m_ipo_start_euler[1], m_ipo_start_euler[2]);
m_ipo_euler_initialized = true;
}
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
//modifies position?
if (m_ipo_channels_active[OB_LOC_X] || m_ipo_channels_active[OB_LOC_Y] || m_ipo_channels_active[OB_LOC_Z] || m_ipo_channels_active[OB_DLOC_X] || m_ipo_channels_active[OB_DLOC_Y] || m_ipo_channels_active[OB_DLOC_Z])
{
if (m_ipo_as_force == true)
{
BGE bugfix, ipo actuator's foce option didnt check that the object was dynamic.
2008-08-27 06:02:10 +00:00
if (m_game_object && ob && m_game_object->GetPhysicsController())
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
{
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
m_game_object->GetPhysicsController()->ApplyForce(m_ipo_local ?
[GameEngine] Commit all Kester's changes made to the gameengine to restore 2.25 like physics. [SCons] Build with Solid as default when enabling the gameengine in the build process [SCons] Build solid and qhull from the extern directory and link statically against them That was about it. There are a few things that needs double checking: * Makefiles * Projectfiles * All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
2004-03-22 22:02:18 +00:00
ob->GetWorldOrientation() * m_ipo_xform.GetPosition() :
m_ipo_xform.GetPosition(), false);
}
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
else
{
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
// Local ipo should be defined with the object position at (0,0,0)
// Local transform is applied to the object based on initial position
MT_Point3 newPosition(0.0,0.0,0.0);
if (!m_ipo_add)
newPosition = ob->GetLocalPosition();
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
//apply separate IPO channels if there is any data in them
//Loc and dLoc act by themselves or are additive
//LocX and dLocX
if (m_ipo_channels_active[OB_LOC_X]) {
newPosition[0] = (m_ipo_channels_active[OB_DLOC_X] ? m_ipo_xform.GetPosition()[0] + m_ipo_xform.GetDeltaPosition()[0] : m_ipo_xform.GetPosition()[0]);
}
else if (m_ipo_channels_active[OB_DLOC_X] && m_ipo_start_initialized) {
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
newPosition[0] = (((!m_ipo_add)?m_ipo_start_point[0]:0.0) + m_ipo_xform.GetDeltaPosition()[0]);
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
//LocY and dLocY
if (m_ipo_channels_active[OB_LOC_Y]) {
newPosition[1] = (m_ipo_channels_active[OB_DLOC_Y] ? m_ipo_xform.GetPosition()[1] + m_ipo_xform.GetDeltaPosition()[1] : m_ipo_xform.GetPosition()[1]);
}
else if (m_ipo_channels_active[OB_DLOC_Y] && m_ipo_start_initialized) {
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
newPosition[1] = (((!m_ipo_add)?m_ipo_start_point[1]:0.0) + m_ipo_xform.GetDeltaPosition()[1]);
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
//LocZ and dLocZ
if (m_ipo_channels_active[OB_LOC_Z]) {
newPosition[2] = (m_ipo_channels_active[OB_DLOC_Z] ? m_ipo_xform.GetPosition()[2] + m_ipo_xform.GetDeltaPosition()[2] : m_ipo_xform.GetPosition()[2]);
}
else if (m_ipo_channels_active[OB_DLOC_Z] && m_ipo_start_initialized) {
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
newPosition[2] = (((!m_ipo_add)?m_ipo_start_point[2]:0.0) + m_ipo_xform.GetDeltaPosition()[2]);
}
if (m_ipo_add) {
if (m_ipo_local)
newPosition = m_ipo_start_point + m_ipo_start_scale*(m_ipo_start_orient*newPosition);
else
newPosition = m_ipo_start_point + newPosition;
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
BGE bug #18596: No ipo dynamics is 2.49rc1.
2009-05-11 23:05:13 +00:00
if (m_game_object)
m_game_object->NodeSetLocalPosition(newPosition);
Initial revision
2002-10-12 11:37:38 +00:00
}
}
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
//modifies orientation?
if (m_ipo_channels_active[OB_ROT_X] || m_ipo_channels_active[OB_ROT_Y] || m_ipo_channels_active[OB_ROT_Z] || m_ipo_channels_active[OB_DROT_X] || m_ipo_channels_active[OB_DROT_Y] || m_ipo_channels_active[OB_DROT_Z]) {
Initial revision
2002-10-12 11:37:38 +00:00
if (m_ipo_as_force) {
Big patches: Erwin Coumans: Abstract the physics engine Charlie C: Joystick fixes Me: Moved the ray cast (shadows, mouse sensor & ray sensor)
2005-03-25 10:33:39 +00:00
[GameEngine] Commit all Kester's changes made to the gameengine to restore 2.25 like physics. [SCons] Build with Solid as default when enabling the gameengine in the build process [SCons] Build solid and qhull from the extern directory and link statically against them That was about it. There are a few things that needs double checking: * Makefiles * Projectfiles * All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
2004-03-22 22:02:18 +00:00
if (m_game_object && ob) {
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
m_game_object->ApplyTorque(m_ipo_local ?
[GameEngine] Commit all Kester's changes made to the gameengine to restore 2.25 like physics. [SCons] Build with Solid as default when enabling the gameengine in the build process [SCons] Build solid and qhull from the extern directory and link statically against them That was about it. There are a few things that needs double checking: * Makefiles * Projectfiles * All the other systems than Linux and Windows on which the build (with scons) has been successfully tested.
2004-03-22 22:02:18 +00:00
ob->GetWorldOrientation() * m_ipo_xform.GetEulerAngles() :
m_ipo_xform.GetEulerAngles(), false);
}
BGE bug #17657 fixed: dRotY doesn't work properly after 90 degrees rotation. This problem is caused by discontinuities in the conversion orientation matrix -> euler angles: the angle sign can switch and thus the direction of the rotation produced by the dRot Ipo. To avoid this bug, the matrix->euler conversion must be avoided during the game. I took the following approach that is compatible with Blender (identical effect in the game and in the 3D view): - no change in Add mode: Rot and dRot are treated as additional rotation to the orientation at the start of the Ipo. There is no matrix->euler conversion and thus no discontinuities. - Rot Ipo are treated as absolute rotation. All 3 axis should be specified but if they are not, the startup object orientation will be used to set the unspecified axis. By doing a matrix-> euler conversion once at the start, the discontinuities are avoided. If there are also dRot curves, they are treated as delta of the corresponding Rot curve or startup angle. - dRot Ipo are treated as Add mode in Local axis. Note about Add mode: Rot and dRot curves are treated identically during the game. However, only dRot curves make sense because they don't interfere with the object orientation in the 3D view.
2008-09-23 20:07:15 +00:00
} else if (m_ipo_add) {
if (m_ipo_start_initialized) {
double yaw=0, pitch=0, roll=0; //delta Euler angles
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
BGE bug #17657 fixed: dRotY doesn't work properly after 90 degrees rotation. This problem is caused by discontinuities in the conversion orientation matrix -> euler angles: the angle sign can switch and thus the direction of the rotation produced by the dRot Ipo. To avoid this bug, the matrix->euler conversion must be avoided during the game. I took the following approach that is compatible with Blender (identical effect in the game and in the 3D view): - no change in Add mode: Rot and dRot are treated as additional rotation to the orientation at the start of the Ipo. There is no matrix->euler conversion and thus no discontinuities. - Rot Ipo are treated as absolute rotation. All 3 axis should be specified but if they are not, the startup object orientation will be used to set the unspecified axis. By doing a matrix-> euler conversion once at the start, the discontinuities are avoided. If there are also dRot curves, they are treated as delta of the corresponding Rot curve or startup angle. - dRot Ipo are treated as Add mode in Local axis. Note about Add mode: Rot and dRot curves are treated identically during the game. However, only dRot curves make sense because they don't interfere with the object orientation in the 3D view.
2008-09-23 20:07:15 +00:00
//RotX and dRotX
if (m_ipo_channels_active[OB_ROT_X])
yaw += m_ipo_xform.GetEulerAngles()[0];
if (m_ipo_channels_active[OB_DROT_X])
yaw += m_ipo_xform.GetDeltaEulerAngles()[0];
//RotY dRotY
if (m_ipo_channels_active[OB_ROT_Y])
pitch += m_ipo_xform.GetEulerAngles()[1];
if (m_ipo_channels_active[OB_DROT_Y])
pitch += m_ipo_xform.GetDeltaEulerAngles()[1];
//RotZ and dRotZ
if (m_ipo_channels_active[OB_ROT_Z])
roll += m_ipo_xform.GetEulerAngles()[2];
if (m_ipo_channels_active[OB_DROT_Z])
roll += m_ipo_xform.GetDeltaEulerAngles()[2];
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
MT_Matrix3x3 rotation(MT_Vector3(yaw, pitch, roll));
if (m_ipo_local)
rotation = m_ipo_start_orient * rotation;
else
rotation = rotation * m_ipo_start_orient;
BGE bug #18596: No ipo dynamics is 2.49rc1.
2009-05-11 23:05:13 +00:00
if (m_game_object)
m_game_object->NodeSetLocalOrientation(rotation);
BGE bug #17657 fixed: dRotY doesn't work properly after 90 degrees rotation. This problem is caused by discontinuities in the conversion orientation matrix -> euler angles: the angle sign can switch and thus the direction of the rotation produced by the dRot Ipo. To avoid this bug, the matrix->euler conversion must be avoided during the game. I took the following approach that is compatible with Blender (identical effect in the game and in the 3D view): - no change in Add mode: Rot and dRot are treated as additional rotation to the orientation at the start of the Ipo. There is no matrix->euler conversion and thus no discontinuities. - Rot Ipo are treated as absolute rotation. All 3 axis should be specified but if they are not, the startup object orientation will be used to set the unspecified axis. By doing a matrix-> euler conversion once at the start, the discontinuities are avoided. If there are also dRot curves, they are treated as delta of the corresponding Rot curve or startup angle. - dRot Ipo are treated as Add mode in Local axis. Note about Add mode: Rot and dRot curves are treated identically during the game. However, only dRot curves make sense because they don't interfere with the object orientation in the 3D view.
2008-09-23 20:07:15 +00:00
}
} else if (m_ipo_channels_active[OB_ROT_X] || m_ipo_channels_active[OB_ROT_Y] || m_ipo_channels_active[OB_ROT_Z]) {
if (m_ipo_euler_initialized) {
// assume all channel absolute
// All 3 channels should be specified but if they are not, we will take
// the value at the start of the game to avoid angle sign reversal
double yaw=m_ipo_start_euler[0], pitch=m_ipo_start_euler[1], roll=m_ipo_start_euler[2];
//RotX and dRotX
if (m_ipo_channels_active[OB_ROT_X]) {
yaw = (m_ipo_channels_active[OB_DROT_X] ? (m_ipo_xform.GetEulerAngles()[0] + m_ipo_xform.GetDeltaEulerAngles()[0]) : m_ipo_xform.GetEulerAngles()[0] );
}
else if (m_ipo_channels_active[OB_DROT_X]) {
yaw += m_ipo_xform.GetDeltaEulerAngles()[0];
}
//RotY dRotY
if (m_ipo_channels_active[OB_ROT_Y]) {
pitch = (m_ipo_channels_active[OB_DROT_Y] ? (m_ipo_xform.GetEulerAngles()[1] + m_ipo_xform.GetDeltaEulerAngles()[1]) : m_ipo_xform.GetEulerAngles()[1] );
}
else if (m_ipo_channels_active[OB_DROT_Y]) {
pitch += m_ipo_xform.GetDeltaEulerAngles()[1];
}
//RotZ and dRotZ
if (m_ipo_channels_active[OB_ROT_Z]) {
roll = (m_ipo_channels_active[OB_DROT_Z] ? (m_ipo_xform.GetEulerAngles()[2] + m_ipo_xform.GetDeltaEulerAngles()[2]) : m_ipo_xform.GetEulerAngles()[2] );
}
else if (m_ipo_channels_active[OB_DROT_Z]) {
roll += m_ipo_xform.GetDeltaEulerAngles()[2];
}
BGE bug #18596: No ipo dynamics is 2.49rc1.
2009-05-11 23:05:13 +00:00
if (m_game_object)
m_game_object->NodeSetLocalOrientation(MT_Vector3(yaw, pitch, roll));
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
}
BGE bug #17657 fixed: dRotY doesn't work properly after 90 degrees rotation. This problem is caused by discontinuities in the conversion orientation matrix -> euler angles: the angle sign can switch and thus the direction of the rotation produced by the dRot Ipo. To avoid this bug, the matrix->euler conversion must be avoided during the game. I took the following approach that is compatible with Blender (identical effect in the game and in the 3D view): - no change in Add mode: Rot and dRot are treated as additional rotation to the orientation at the start of the Ipo. There is no matrix->euler conversion and thus no discontinuities. - Rot Ipo are treated as absolute rotation. All 3 axis should be specified but if they are not, the startup object orientation will be used to set the unspecified axis. By doing a matrix-> euler conversion once at the start, the discontinuities are avoided. If there are also dRot curves, they are treated as delta of the corresponding Rot curve or startup angle. - dRot Ipo are treated as Add mode in Local axis. Note about Add mode: Rot and dRot curves are treated identically during the game. However, only dRot curves make sense because they don't interfere with the object orientation in the 3D view.
2008-09-23 20:07:15 +00:00
} else if (m_ipo_start_initialized) {
// only DROT, treat as Add
double yaw=0, pitch=0, roll=0; //delta Euler angles
//dRotX
if (m_ipo_channels_active[OB_DROT_X])
yaw = m_ipo_xform.GetDeltaEulerAngles()[0];
//dRotY
if (m_ipo_channels_active[OB_DROT_Y])
pitch = m_ipo_xform.GetDeltaEulerAngles()[1];
//dRotZ
if (m_ipo_channels_active[OB_DROT_Z])
roll = m_ipo_xform.GetDeltaEulerAngles()[2];
// dRot are always local
MT_Matrix3x3 rotation(MT_Vector3(yaw, pitch, roll));
rotation = m_ipo_start_orient * rotation;
BGE bug #18596: No ipo dynamics is 2.49rc1.
2009-05-11 23:05:13 +00:00
if (m_game_object)
m_game_object->NodeSetLocalOrientation(rotation);
Initial revision
2002-10-12 11:37:38 +00:00
}
}
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
//modifies scale?
if (m_ipo_channels_active[OB_SIZE_X] || m_ipo_channels_active[OB_SIZE_Y] || m_ipo_channels_active[OB_SIZE_Z] || m_ipo_channels_active[OB_DSIZE_X] || m_ipo_channels_active[OB_DSIZE_Y] || m_ipo_channels_active[OB_DSIZE_Z]) {
//default is no scale change
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
MT_Vector3 newScale(1.0,1.0,1.0);
if (!m_ipo_add)
newScale = ob->GetLocalScale();
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
if (m_ipo_channels_active[OB_SIZE_X]) {
newScale[0] = (m_ipo_channels_active[OB_DSIZE_X] ? (m_ipo_xform.GetScaling()[0] + m_ipo_xform.GetDeltaScaling()[0]) : m_ipo_xform.GetScaling()[0]);
}
else if (m_ipo_channels_active[OB_DSIZE_X] && m_ipo_start_initialized) {
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
newScale[0] = (m_ipo_xform.GetDeltaScaling()[0] + ((!m_ipo_add)?m_ipo_start_scale[0]:0.0));
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
//RotY dRotY
if (m_ipo_channels_active[OB_SIZE_Y]) {
newScale[1] = (m_ipo_channels_active[OB_DSIZE_Y] ? (m_ipo_xform.GetScaling()[1] + m_ipo_xform.GetDeltaScaling()[1]): m_ipo_xform.GetScaling()[1]);
}
else if (m_ipo_channels_active[OB_DSIZE_Y] && m_ipo_start_initialized) {
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
newScale[1] = (m_ipo_xform.GetDeltaScaling()[1] + ((!m_ipo_add)?m_ipo_start_scale[1]:0.0));
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
//RotZ and dRotZ
if (m_ipo_channels_active[OB_SIZE_Z]) {
newScale[2] = (m_ipo_channels_active[OB_DSIZE_Z] ? (m_ipo_xform.GetScaling()[2] + m_ipo_xform.GetDeltaScaling()[2]) : m_ipo_xform.GetScaling()[2]);
}
else if (m_ipo_channels_active[OB_DSIZE_Z] && m_ipo_start_initialized) {
BGE logic patch: new "Add" mode for Ipo actuator, several corrections in state system. New Add mode for Ipo actuator ============================= A new Add button, mutually exclusive with Force button, is available in the Ipo actuator. When selected, it activates the Add mode that consists in adding the Ipo curve to the current object situation in world coordinates, or parent coordinates if the object has a parent. Scale Ipo curves are multiplied instead of added to the object current scale. If the local flag is selected, the Ipo curve is added (multiplied) in the object's local coordinates. Delta Ipo curves are handled identically to normal Ipo curve and there is no need to work with Delta Ipo curves provided that you make sure that the Ipo curve starts from origin. Origin means location 0 for Location Ipo curve, rotation 0 for Rotation Ipo curve and scale 1 for Scale Ipo curve. The "current object situation" means the object's location, rotation and scale at the start of the Ipo curve. For Loop Stop and Loop End Ipo actuators, this means at the start of each loop. This initial state is used as a base during the execution of the Ipo Curve but when the Ipo curve is restarted (later or immediately in case of Loop mode), the object current situation at that time is used as the new base. For reference, here is the exact operation of the Add mode for each type of Ipo curve (oLoc, oRot, oScale, oMat: object's loc/rot/scale and orientation matrix at the start of the curve; iLoc, iRot, iScale, iMat: Ipo curve loc/rot/scale and orientation matrix resulting from the rotation). Location Local=false: newLoc = oLoc+iLoc Local=true : newLoc = oLoc+oScale*(oMat*iLoc) Rotation Local=false: newMat = iMat*oMat Local=true : newMat = oMat*iMat Scale Local=false: newScale = oScale*iScale Local=true : newScale = oScale*iScale Add+Local mode is very useful to have dynamic object executing complex movement relative to their current location/orientation. Of cource, dynamics should be disabled during the execution of the curve. Several corrections in state system =================================== - Object initial state is taken into account when adding object dynamically - Fix bug with link count when adding object dynamically - Fix false on-off detection for Actuator sensor when actuator is trigged on negative event. - Fix Parent actuator false activation on negative event - Loop Ipo curve not restarting at correct frame when start frame is different from one.
2008-07-08 12:18:43 +00:00
newScale[2] = (m_ipo_xform.GetDeltaScaling()[2] + ((!m_ipo_add)?m_ipo_start_scale[2]:1.0));
}
if (m_ipo_add) {
newScale = m_ipo_start_scale * newScale;
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
BGE bug #18596: No ipo dynamics is 2.49rc1.
2009-05-11 23:05:13 +00:00
if (m_game_object)
m_game_object->NodeSetLocalScale(newScale);
Delta Loc/Rot/Scale Ipo curve are now supporting in the BGE with the following limitations: 1. All Ipo channels are now independent. In Blender 2.45, all 3 Loc Ipo channels were automatically set together. For example, having just a LocX Ipo channel was sufficient to fix the X, Y and Z coordinates, with the Y and Z value taken from the object original Y and Z location in Blender. The same was true for the 3 Rot and the 3 Scale Ipo channels: the missing channels were assumed to have constant value taken from the object original orientation/scale in Blender. With this patch, all Ipo channels are now independent. THIS WILL CREATE BACKWARD COMPATIBILITY PROBLEM if you omit to define the 3 channels of a same type together in your Blend file: the undefined Loc, Rot, Scale coordinates of the object will be influenced by the parent/spawner Loc/Rot/Scale in case the object is a child or dynamically created. 2. Delta Loc, Rot, Scale are now supported with the following limitations: - The delta Loc/Rot Ipo modify the object global (NOT local) location/orientation - The delta Scale change the object local scale - The delta Ipo curves are relative to the object starting Loc/Rot/Scale when the Ipo was first activated; after that, the delta Ipo becomes global. This means that the object will return to this initial Loc/Rot/Scale when you later restart the Ipo curve, even if you had changed the object Loc/Rot/Scale in the meantime. Of course this applies only to the specific Loc/Rot/Scale coordinate that are defined in the Ipo channels as the channels are now independent. 3. When the objects are converted from Blender to the BGE, the delta Loc/Rot/Scale that might result from initial non-zero values in delta Ipo Curves will be ignored. However, as soon as the delta Ipo curve is activated, the non-zero values will be taken into account and the object will jump to the same Loc/Rot/Scale situation as in Blender. Note that delta Ipo curves with initial non-zero values is bad practice; logically, a delta Ipo curver should always start from 0. 4. If you define both a global and delta channel of the same type (LocX and DLocX), the result will be a global channel equivalent to the sum of the two channels (LocX+DLocX).
2008-03-12 21:33:24 +00:00
}
Initial revision
2002-10-12 11:37:38 +00:00
m_modified=false;
}
return false;
}
void KX_IpoSGController::AddInterpolator(KX_IInterpolator* interp)
{
this->m_interpolators.push_back(interp);
}
SG_Controller* KX_IpoSGController::GetReplica(class SG_Node* destnode)
{
KX_IpoSGController* iporeplica = new KX_IpoSGController(*this);
// clear object that ipo acts on in the replica.
iporeplica->ClearObject();
BGE bug #18596: No ipo dynamics is 2.49rc1.
2009-05-11 23:05:13 +00:00
iporeplica->SetGameObject((KX_GameObject*)destnode->GetSGClientObject());
Initial revision
2002-10-12 11:37:38 +00:00
// dirty hack, ask Gino for a better solution in the ipo implementation
// hacken en zagen, in what we call datahiding, not written for replication :(
T_InterpolatorList oldlist = m_interpolators;
iporeplica->m_interpolators.clear();
T_InterpolatorList::iterator i;
for (i = oldlist.begin(); !(i == oldlist.end()); ++i) {
KX_ScalarInterpolator* copyipo = new KX_ScalarInterpolator(*((KX_ScalarInterpolator*)*i));
iporeplica->AddInterpolator(copyipo);
MT_Scalar* scaal = ((KX_ScalarInterpolator*)*i)->GetTarget();
applied the 64-bit pointer patch submitted by Ken Hughes
2005-11-28 06:51:54 +00:00
uint_ptr orgbase = (uint_ptr)&m_ipo_xform;
uint_ptr orgloc = (uint_ptr)scaal;
uint_ptr offset = orgloc-orgbase;
uint_ptr newaddrbase = (uint_ptr)&iporeplica->m_ipo_xform;
Initial revision
2002-10-12 11:37:38 +00:00
newaddrbase += offset;
MT_Scalar* blaptr = (MT_Scalar*) newaddrbase;
copyipo->SetNewTarget((MT_Scalar*)blaptr);
}
return iporeplica;
}
KX_IpoSGController::~KX_IpoSGController()
{
T_InterpolatorList::iterator i;
for (i = m_interpolators.begin(); !(i == m_interpolators.end()); ++i) {
delete (*i);
}
}
Copy Permalink