- Replace md5sum with sha256sum for verification of downloaded
external and optional dependencies.
Type: improvement
Change-Id: I52c96098d3cfd4c1eaf599da44a7b859ad24f1a4
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
- dpdk mellanox driver setting requires rdma-core.mk is included
before dpdk.mk makefile. Include check for rdma-core_version
variable definition in dpdk.mk to prevent a re-occurance of this
issue.
Type: fix
Fixes: 70522a1dc
Change-Id: I297cbd734ac7abe970eac7fb317d06b7acfc5a40
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
This patch bumps DPDK version to 24.07 and RDMA version
per dpdk 24.07 release notes (rdma-core >= 52.0)
Type: feature
Change-Id: I07c6f27becdbcd3696b821bbfd145610775cf51e
Signed-off-by: Kai Ji <kai.ji@intel.com>
FreeBSD sed isn't compatible with gnu seds in place option. On FreeBSD
explicitly use gsed, on Linux and other platforms this is available just
as 'sed'.
Type: improvement
Change-Id: I6e4fcaf11d4d22cd3e4cd0c3327b16393542845f
Signed-off-by: Tom Jones <thj@freebsd.org>
Disable building the FreeBSD kernel modules, while these are required
to run, this dpdk step will fails inside the vpp build.
If the build succeeded this step would try to install the kernel modules
as root in the vpp build which also isn't desirable. For packaging the
kernel modules should be provided in a seperate package rather than
through the vpp build process.
Type: improvement
Change-Id: I01f1ae2845445e2babad380b675054b80d4b325b
Signed-off-by: Tom Jones <thj@freebsd.org>
This patch bumps DPDK version from 23.03 to 23.07.
Type: feature
Change-Id: I15140cecd008bfafb358f6348a1cb8fc08f70f02
Signed-off-by: Kai Ji <kai.ji@intel.com>
This patch bumps DPDK version from 22.11 to 23.03.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I10203a6408ceb5a40fe392924130652b91ebc993
This patch bumps DPDK version from 22.07 to 22.11.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I82df2c0678e1cc1b3739a5b0677f0c4a4180a489
- tell git to ignore all build/external generated files
Type: make
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I4af26a76a0248939366cd09b577d422af801c0c3
- Verify mlx_rdma_dpdk_matrix.txt versions,
build MLX drivers in dpdk if the versions match.
Also output version comparison results to a file
for CI job to send notification email when the
versions do not match.
Change-Id: Id1384ba4ea4b1f855f4d77d1d8e2c38683abfe1f
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Type: feature
This patch bumps DPDK version to 22.07.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I72ecb31ca15774aed4453778042120610020a0c1
- the cnxk code fails to link using the gcc-11 toolchain
included in the ARM64 Ubuntu-22.04 distro. This is required
for Ubuntu-22.04 CI jobs (both docker image building & CI
job execution on ARM64)
- Currently unable to replicate this failure on the dpdk repo.
Type: fix
Change-Id: Ice44aef9f0f721b4c88ac78f92a14bda87dc80a6
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
This patch bumps dpdk version from 21.11 to 22.03.
Type: feature
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I152a7857378371d3fd26d7473421c2b3113cd3ee
Type: feature
This patch bumps dpdk version from 21.08 to 21.11
Change-Id: Id37fdba75f1ea4f4eac3c92226f3b1c539e1daca
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
allow verbose dpdk build to be enabled. Useful for tools, like debian
blhc, that want to inspect build logs.
The '--verbose' option to 'meson compile' requires at least version
0.55.
Type: make
Change-Id: I54e91298f632e2b91247680d9295701b05353abe
Signed-off-by: Nick Brown <nickbroon@gmail.com>
Type: feature
This patch bumps dpdk version from 21.05 to 21.08
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I8f655dae1489c11e7fb2ff86f8a91b597383bd99
Type: feature
This patch bumps DPDK version to 21.05 and updated VPP to
accomodate the changes in DPDK latest version.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: If217441f70c9ab531196dca7ec7a486ec9931cff
Update of DPDK to latest stable release.
As this introduces new build dependency, it also adds install
of pyelftools to the build step. (note however that flush of pip downloads
cache dir is required)
https://doc.dpdk.org/guides-21.02/rel_notes/release_21_02.html
Type: improvement
Signed-off-by: Kepka, Krzysztof <krzysztof.kepka@intel.com>
Change-Id: I7ed2ca965f01c1062f5abc25ea428e8c1a016366
Type: feature
This patch bumps DPDK to 20.11. In addtion a few changes are
made:
- Changed dynamic rx offload flag display.
- Updated deprecating options.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I6e4399d551a7eb8e1a9fc9ef6e39e74266450ad4
Type: fix
This patch re-enables libIPSec_MB build for the ipsecmb crypto engine
plugin.
Also since DPDK meson build relies on system installed libIPSec_MB.so
that may be inconsistent with VPP compiled one (system installed
version vs VPP locally compiled version for example), this patch also
disables all libIPSec_MB dependant PMDs from DPDK build.
Also ipsec-mb version is incresed to 0.54.
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I2ff9e7cd0c35cff9fa642895301a26a5350ea94e
Type: fix
Since DPDK is now compiled by meson but some compiles in VPP is
missing. This patch fixes that.
- Fixes QAT PMD not compiled. QAT meson compile, even for sym
crypto PMD, is happened in drive/compress/qat. Originally all
PMDs in compressdev is disabled by default. This patch fixes
that.
- Fixes DPDK plugin version detection. DPDK meson build
generates rte_build_config.h, which containing all version
information in build-dpdk instead of rte_config.h in make.
This patch uses the file to detect version data.
- Removed SW crypto PMD auto-creation in cryptodev engine. In
case the AESNI-MB PMD required shared library is missing.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I7cd91abb5de303ff5e4c55cd05e011b57f883524
If libbsd is detected by the DPDK build system, DPDK does not provide
implementations for strlcpy and dynamically link against the one
provided by libbsd. When the DPDK plugin is loaded by VPP, a crash
occurs because libbsd is not loaded by VPP.
Type: fix
Change-Id: Ib691bbe27edcf0f6f0a3d39952e439027cef72cb
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
This adds support to compile the bnxt PMD that supports Broadcom's
10/25/40/50/100/200 Gbps NICs. Tested with modified DPDK driver on
x86_64 and aarch64 targets that is pending upstream acceptance, but
should compile just fine today.
Type: feature
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Change-Id: I735a991c4cae4fa77e5605094facea54b781a1db
Type: fix
The scenario is touch of a dpdk source file in places like
<TOP>/build-root/build-vpp-native/external/dpdk-19.08/. The subsequent
build will trigger an rm -rf $(PACKAGE_INSTALL_DIR) by
build-root/Makefile at around line 709. Because the package in
question, "external", consists of various "sub" packages, all of which
are controlled with files like .quicly.install.ok located in
build-root/build-vpp[_debug]-native/external, we end up not handling the
.*.install.ok files to reflect the removal of that PACKAGE_INSTALL_DIR.
This fix will correct that, at least for the case of touching/changing
dpdk files. A better long term solution would be to change the "sub"
packages to be full fledged build system packages, as Dave Barach points
out.
Signed-off-by: Burt Silverman <burtms@gmail.com>
Change-Id: Ia94ccaa2795cbf354b5921c3001a7141313b66be
We have native implementation and we should not maintain both....
Change-Id: Ic09ebffda52cdc733b3cfeff06690e0d3cc08084
Signed-off-by: Damjan Marion <damarion@cisco.com>
The current aarch64 version of VPP package distro in cloud repository
(https://packagecloud.io/fdio/master/ubuntu), is built on a ThunderX server,
using some arch-specific options, for example, 128Byte cache line size,
T=arm64-thunderx-linuxapp-gcc, RTE_MACHINE=thunderx
The patch is trying to build package distro with aarch64 generic features,
for both binary type targets, e.g., build/build-release, and package type
targets, e.g., pkg-deb/pkg-rpm, with the generic options, e.g.,
128Byte cache line size, T=arm64-armv8a-linuxapp-gcc, RTE_MACHINE=armv8a
If end users want to build arch specific optimized image,
TARGET_PLATFORM variable could be used, as below example,
$ make build-release/pkg-deb TARGET_PLATFORM=thunderx
Change-Id: If78bca8709fe83db6a95e8c26346f206bf5ea71d
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Sirshak Das <Sirshak.Das@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
VPP rdma driver relies on an internal rdma-core not compatible with DPDK
MLX driver. Force the use of external rdma-core through
RTE_IBVERBS_LINK_DLOPEN DPDK build option and make sure internal
rdma-core symbols are not leaked outside of the rdma plugin.
Change-Id: I5b2281259f517c4e109d388d172b72eadd69986f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
RDMA ibverb is a userspace API to efficiently rx/tx packets. This is an
initial, unoptimized driver targeting Mellanox cards.
Next steps should include batching, multiqueue and additional cards.
Change-Id: I0309c7a543f75f2f9317eaf63ca502ac7a093ef9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Upstream DPDK changed the names of the options to use dlopen()
with libibverbs and libmlx[45] from RTE_LIBRTE_MLX[45]_DLOPEN_DEPS
to RTE_IBVERBS_LINK_DLOPEN (handles both mlx4 and mlx5).
VPP's build option to enable this configuration when building DPDK
no longer worked starting when VPP moved to DPDK 19.02. Update VPP's
build options to enable the correct option name.
Change-Id: I8e34e1d3fc4ee8aac4fd6f2a7d27177f2b0dea50
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
HQoS requires fixes to work with dpdk 19.02 so code is disabled and
pending deprecation unless active maintainer is found.
Change-Id: I3569c4287b6dfdd2c29e02375eb53bf01fa6ae84
Signed-off-by: Damjan Marion <damarion@cisco.com>
Setting DPDK_PMD_TAP=y when building will enable the tap PMD
in the build configuration that is generated for DPDK. Enabling
this currently results in a failure during compilation because
rte_gso.h is not found. RTE_LIBRTE_GSO needs to be set to y for
this to work.
Use the setting for the tap PMD to determine the value for
RTE_LIBRTE_GSO.
Change-Id: Ie395417b1c62369a95320856081ad52c674ce9f2
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Save a few cycles on every rx and tx burst call by not compiling
in support for DPDK Rx and Tx callbacks. This feature is optional
and unused by current VPP code.
Change-Id: I1916bc8822e2bd405c1ac3909e85467a01023862
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DPDK has added a lot more drivers and config options that are not
used by current VPP code.
Change-Id: I385f8b5df02b95a31ca9abe506c79cf52e99a24c
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
DPDK has switched to dynamic logging for initialization (since 18.05).
Don't generate config for unused options.
Change-Id: I3f1a5b3b8bee38abc9d0654737b59368646ed0fa
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
