Check and skip VPP_EXCLUDED_PLUGINS tests for most of plugins.
Type: improvement
Signed-off-by: Dmitry Valter <d-valter@yandex-team.com>
Change-Id: I23fd3666729251c639aa8da72a676058e3f5bb4e
When the NIC does not support mac filter, we rely on ethernet-input
node to do the destination mac check, ie, when the interface is in L3,
the mac address for the packet must be the mac address of the
interface where the packet arrives. This works fine in ethernet-input
node when all packets in the frame might have different interfaces, ie,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However,
when all packets are having the same interface,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes
through the optimized routine eth_input_single_int -> eth_input_process_frame.
That is where dmac check has a bug when all packets in the frame are
either, ip4, ip6, or mpls without vlan tags. Because without vlan tags,
the code handles all packets in fast path and ignores dmac check.
With vlan tags, the code goes to slow path where dmac check is handled
properly.
The fix is to check if we have a bad dmac in the fast path and force the
code to go to slow path which will handle dmac check properly.
Also do a wholesale correction on all the testcases which do not use
the proper dmac when sending L3 packets.
Type: fix
Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c
Signed-off-by: Steven Luong <sluong@cisco.com>
- Make framework.py classes a subset of asfframework.py classes
- Remove all packet related code from asfframework.py
- Add test class and test case set up debug output to log
- Repatriate packet tests from asf to test directory
- Remove non-packet related code from framework.py and
inherit them from asfframework.py classes
- Clean up unused import variables
- Re-enable BFD tests on Ubuntu 22.04 and fix
intermittent test failures in echo_looped_back
testcases (where # control packets verified but
not guaranteed to be received during test)
- Re-enable Wireguard tests on Ubuntu 22.04 and fix
intermittent test failures in handshake ratelimiting
testcases and event testcase
- Run Wiregard testcase suites solo
- Improve debug output in log.txt
- Increase VCL/LDP post sleep timeout to allow iperf server
to finish cleanly.
- Fix pcap history files to be sorted by suite and testcase
and ensure order/timestamp is correct based on creation
in the testcase.
- Decode pcap files for each suite and testcase for all
errors or if configured via comandline option / env var
- Improve vpp corefile detection to allow complete corefile
generation
- Disable vm vpp interfaces testcases on debian11
- Clean up failed unittest dir when retrying failed testcases
and unify testname directory and failed linknames into
framwork functions
Type: test
Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
- Package update performed by
1. updating pip, pip-tools, setuptools
2. 'make test-refresh-deps' on ubuntu 22.04
3. fixing 'make test' and 'make docs' issues
on ubuntu 22.04
4. 'make test-refresh-deps' on ubuntu 20.04
- Add dependency for 'make test-refresh-deps'
to insure python venv is set up.
- Update of python formatter, black,
caused reformating of 41 python code
files.
Type: make
Change-Id: I7cafdf4b5189065ac57cb6b254937f6e0897a924
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Drop pycodestyle for code style checking in favor of black. Black is
much faster, stable PEP8 compliant code style checker offering also
automatic formatting. It aims to be very stable and produce smallest
diffs. It's used by many small and big projects.
Running checkstyle with black takes a few seconds with a terse output.
Thus, test-checkstyle-diff is no longer necessary.
Expand scope of checkstyle to all python files in the repo, replacing
test-checkstyle with checkstyle-python.
Also, fixstyle-python is now available for automatic style formatting.
Note: python virtualenv has been consolidated in test/Makefile,
test/requirements*.txt which will eventually be moved to a central
location. This is required to simply the automated generation of
docker executor images in the CI.
Type: improvement
Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
- Generate copyright year and version
instead of using hard-coded data
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I6058f5025323b3aa483f5df4a2c4371e27b5914e
- Relocate plugin tests for 'make test' into
src/plugins/*/test so that plugin test cases
are co-located with the plugin source code.
Type: refactor
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I503e6a43528e14981799b735fa65674155713f67
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Test failing due to call to super.tearDown in setUp.
==============================================================================
FAIL: test UDP ports
------------------------------------------------------------------------------
Traceback (most recent call last):
File "/vpp/test/test_gtpu.py", line 77, in test_udp_port
self._check_udp_port_ip4(False)
File "/vpp/test/test_gtpu.py", line 48, in _check_udp_port_ip4
self.assertEqual(err, self.ip4_err + 1)
AssertionError: 0L != 1
Type: fix
Change-Id: Iec4ef5edd3ee11bcd962b77cc8159dee9cb15687
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
This change adds a consistent interface for adding test-specific show commands to
log.txt.
It also adds log markers for the execution of setUp[Class], tearDown[Class]
in the logs.
Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/
Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
This was deprecated ~ python 2.4, and causes a TypeError as sideEffect.
>>> raise "foo"
Traceback (most recent call last):
File "<input>", line 1, in <module>
TypeError: exceptions must derive from BaseException
Change-Id: I4117b6d60ae896eaa1ef2a73a323d8d241f8c3a7
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Split this work up into pieces.
Please don't add new wrappers to vpp_papi_provider.py.
Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10
Signed-off-by: Ole Troan <ot@cisco.com>
- many of the patches fd.io applies in test/patches/2.3.3 are now upstreamed in 2.4
- 2.4 adds support for IGMPv3 which is my main motivation for the upgrade
Change-Id: If2c0a524e3cba320b4a5d8cd07817c6ea2bf0c5a
Signed-off-by: Neale Ranns <nranns@cisco.com>
