DPDK rte_cryptodev_socket_id() is returning zero for QAT devices.
Apply DPDK patch where correct NUMA node can be obtained with pci_dev->device.numa_node.
Change-Id: I1c7a77bb13e2db8615189e97b67d68d043127787
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
dlopen linkage allow more transparent use for Mellanox nics.
Mellanox shared library librte_pmd_mlx5/4_glue.so* placed in LD_LIBRARY_PATH
At run time Mellanox code will be loaded only when Mellanox nics explicty used.
i.e if VPP is used with other vendor Mellanox code is not loaded.
Change-Id: Ib05bdbfc4cbb6e447c67186c98361f9c5b447140
Signed-off-by: Amir Zeidner <amirzei@mellanox.com>
Looks like bug in ipsec-mb library when DEBUG=yes is passed
so simply we stop doing that.
Change-Id: Ifedd6d8a2aecf5af902ab4fa80ef197aebd5f829
Signed-off-by: Damjan Marion <damarion@cisco.com>
On rx, the ENA PMD sets tx offload flags based on the
received packet's l4 protocol. This means you need
to turn off those offloads for every packet if you
encapsulate packets arriving on an interface using
that PMD. Disable this behavior.
Change-Id: Icae9f32e3d292d767da440ae5c1280902bdaa083
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
DPDK tarball was changed by mistake and now it is reverted back.
This reverts commit 3d786efcb087533320e89f80077127fc507cfd99.
Change-Id: I1a07b96fbc3f4fe13bb4a5c401036cae4ac5d346
Signed-off-by: Damjan Marion <damarion@cisco.com>
The dpdk package posted on static.dpdk.org for 17.08
was updated 11/27. This updates the checksum thats
statically included in makefile. Looks like they
also changed the dir structure to add -stable.
fast.dpdk.org has issues with its mirrors being in
sync...changing to static.dpdk.org for now
Change-Id: Id81e328b07873700ae3f76e1ca819f94f26f38c8
Signed-off-by: Ed Kern <ejk@cisco.com>
With recent introduction of C++ code required memory for each compiler
instance has significantly increased causing build issues.
Currently build system spins 2 compiler instances per logical CPU core.
As CPU can hardly execute more than one thread at a time, it should be
pretty safe to change that formula so it doesn't multiply number of cpu
cores by 2 and such change will signifucantly reduce amount of memory
needed.
Change-Id: Ic829fff6e45f4caf98a6d9c1c98c53ed003039ef
Signed-off-by: Damjan Marion <damarion@cisco.com>
As not all distros have the minimum required nasm version (2.12.01)
available, build nasm from sources when building Intel IPsec MB library.
Change-Id: Iaa9da87f612c0f84da5704162c3bf430b3351076
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
At present, creating bonding devices using --vdev is broken for PMD like
mlx5 as it is neither UIO nor VFIO based and hence PMD driver is unknown
to find_port_id_by_pci_addr().
This DPDK patch fixes parsing PCI ID from bonding device params by verifying
it in RTE PCI bus, rather than checking dev->kdrv.
Change-Id: If575f63ef31733102566610d769ddd212d74736a
Signed-off-by: Steve Shin <jonshin@cisco.com>
This patch reworks the DPDK ipsec implementation including the cryptodev
management as well as replacing new cli commands for better usability.
For the data path:
- The dpdk-esp-encrypt-post node is not necessary anymore.
- IPv4 packets in the decrypt path are sent to ip4-input-no-checksum instead
of ip4-input.
The DPDK cryptodev cli commands are replaced by the following new commands:
- show dpdk crypto devices
- show dpdk crypto placement [verbose]
- set dpdk crypto placement (<device> <thread> | auto)
- clear dpdk crypto placement <device> [<thread>]
- show dpdk crypto pools
Change-Id: I47324517ede82d3e6e0e9f9c71c1a3433714b27b
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
JIRA VPP-498
This patch also allows RPMs to be built without multi-
buffer crypto for some RPM based downstream distros that
don't have sufficiently new nasm or don't have an USA
export license for multi-buffer crypto.
The default is to build WITH multi-buffer crypto
for x86-64. This patch allows optional building without
multi-buffer crypto.
To build without multi-buffer crypto, set the AESNI
environment variable to n.
To build rpm packages without multi-buffer crypto,
build the rpms with the option turned off.
make build AESNI=n
or..
make pkg-rpm --without aesni
---How to test this patch on a Centos build.---
Build as above and verify that nasm isn't executed during
the build process.
vpp may be installed and the dpdk plugin may be inspected to
verify that the multi-buffer code isn't present.
Change-Id: I8c5cfd4cdd9eb2b96772a687eaa54560806e001b
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
Use ARMv8 Main ID Register (exposed thru /proc/cpuinfo) to identify
the CPU implementor and part number. For further details, see the
ARMv8 ARM D7.2.66.
Change-Id: I2b0d0b165cda4ab9fc57c645af90e9e354b73f44
Signed-off-by: Brian Brooks <brian.brooks@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Song Zhu <song.zhu@arm.com>
This fixes build on non-x86 platforms like arm64.
Change-Id: I7ff5df92f89e34c27889d82f35924dc28cde8c39
Signed-off-by: Damjan Marion <damarion@cisco.com>
Beside the fact that we don't need it, it fails to build on ARM64.
Change-Id: Iefae8bf234b588d8005df5e053b9152b6611929c
Signed-off-by: Damjan Marion <damarion@cisco.com>
libraries.
This patch addresses the misbehaviour.
Change-Id: I41f1ece3ca21c5a8f2c95533ed3d77a535233ea6
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
Current optional DPDK PMDs are:
- AESNI MB PMD (SW crypto)
- AESNI GCM PMD (SW crypto)
- MLX4 PMD
- MLX5 PMD
This change will always build DPDK SW crypto PMDs and required SW crypto
libraries, while MLX PMDs are still optional and the user has to build
required libraries.
Now the configure script detects if any of the optional DPDK PMDs were
built and link against their required libraries/dependencies.
Change-Id: I1560bebd71035d6486483f22da90042ec2ce40a1
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
With some Linux container platforms /proc/cpuinfo reads as an empty
file. (Aside: stat on /proc/cpuinfo always indicates a length of
zero bytes, regardless of its content).
This has the effect that the make '-j' parameter being passed the
unhelpful value of '0' both in build-root/Makefile and dpdk/Makefile.
Make complains with the error:
make: the '-j' option requires a positive integer argument
This patch checks for '0' and replaces it with '2' as a reasonable
number of jobs to run in parallel when the CPU count isn't known
(and assumed to be one). It also makes the value determination
consistent between VPP and DPDK (2*ncpu).
Change-Id: I78b89420114a825fab4d339e4f9291d486b7b9c8
Signed-off-by: Chris Luke <chrisy@flirble.org>
This reverts commit 0e2e10b77d63196bfb93ae5be1251bbc1a1b561a.
Change-Id: I3c1737f391b6ed127f92416f06449216e79859bb
Signed-off-by: Peter Mikus <pmikus@cisco.com>
This patch is causing DPDK to provide bad MAC address
for legacy virtio interfaces.
Change-Id: I526cd35a38164ede80a8ab6decb9e0d1ebfad723
Signed-off-by: Damjan Marion <damarion@cisco.com>
Using -march=native was causing SIGILLs on Atoms.
Change-Id: I98c7fdaa139e3db70c972950dc9c167bf5803656
Signed-off-by: Damjan Marion <damarion@cisco.com>
The mac_addr_add callback function was simply replacing the primary MAC
address instead of adding new ones and the mac_addr_remove callback would
only remove the primary MAC form the adapter. Fix the functions to add or
remove new address. Allow up to 64 MAC addresses per port.
Change-Id: Ieff396ae27505c4c09f028911eff907757b03c7d
Signed-off-by: Steve Shin <jonshin@cisco.com>
in rte_eth_dev_config_restore() routine. Added default MAC replay as well.
Fixes: 4bdefaade6d1 ("ethdev: VMDQ enhancements")
Change-Id: I646799477e9a6f2fdeff7a52a76d216ef91115e9
Signed-off-by: Steve Shin <jonshin@cisco.com>
Build Cryptodev IPsec support by default when DPDK is enabled but only build
hardware Cryptodev PMDs.
To enable Cryptodev support, a new startup.conf option for dpdk has been
introduced 'enable-cryptodev'.
During VPP init, if Cryptodev support is not enabled or not enough cryptodev
resources are available then default to OpenSSL ipsec implementation.
Change-Id: I5aa7e0d5c2676bdb41d775ef40364536a081956d
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
