This patch adds source ip based sticky session, which is already
implemented in many hardware LBs and software LBs. Note that sticky
sessions may be reset if the hash is recalculated as ASs are added
or deleted.
Since this feature is unrelated to the other existing options, the
lb_add_del_vip API version has been upgraded to v2 and a new option
"src_ip_sticky" has been added.
Type: feature
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
Change-Id: I3eb3680a28defbc701f28c873933ec2fb54544ab
Fool-proof assert_checksum_valid so that one does not verify checksum on
wrong layer (because of how scapy internally works).
Make assert_packet_checksums_valid start checksum checking at inner
layers and outwards to make it more obvious where the error is. With old
behaviour, if one received an ICMP packet carrying a truncated TCP
packet, an error would be raised for ICMP checksum, as that one would be
the first to be wrong after recalculating all packet checksums, while
the real issue is TCP header being truncated and thus unsuitable for use
with this function.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I39a2b50ec5610f969cfde9796416ee3a50ae0ba3
In fast path implementation of spd policy lookup opposite convention to
the original implementation has been applied and local ip range has been
interchanged with the remote ip range. This fix addresses this issue.
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I0b6cccc80bf52b34524e98cfd1f1d542008bb7d0
- load openssl legacy providers during quic init
when building with openssl 3.0 or greater
- re-enable quic 'make test' testcases on
ubuntu-22.04
Type: fix
Change-Id: Icfd429b6bc1bddf9f9937baa44cc47cd535ac5f2
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Useful to update the tunnel paramaters and udp ports (NAT-T) of an SA
without having to rekey. Could be done by deleting and re-adding the
SA but it would not preserve the anti-replay window if there is one.
Use case: a nat update/reboot between the 2 endpoints of the tunnel.
Type: feature
Change-Id: Icf5c0aac218603e8aa9a008ed6f614e4a6db59a0
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
After deleting a sw interface with nat44 features, the next created
sw interface will get the same sw_index reused and therefore will
erroneously have the same nat features enabled.
Type: fix
Change-Id: I1d84f842ab7ab2a757668ae1a111efe67e1e924d
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Tests gso/gro-coalesce features on tapv2, tunv2 and af_packet
interfaces to ensure that packet transmission is enabled correctly
for various MTU sizes and interface combinations in bridged and
routed topologies for IPv4 and IPv6. Interface tests are
dynamically generated at run time from the config file
vm_test_config.py.
Type: test
Change-Id: I5f9d8cc80d20b4e34011fc8a87e35659bd9613bc
Signed-off-by: Naveen Joy <najoy@cisco.com>
To support testing of external plugins, add support to the test framework and PAPI
for specifying a list of locations to look for api.json files.
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I128a306e3c091dc8ef994801b1470b82d2f4595d
Signed-off-by: Ole Troan <ot@cisco.com>
The log file directory is configurable with run.py using the
--log-dir argument. This patch removes the use of /tmp as
the default dir for storing all test logs. The default
log dir is now set to show the year, month and day
of the test run. This provides a more meaningful aggregation
of test logs for effective troubleshooting. The default log
dir is set to <CWD>/test-run-YYYY-MM-DD.
Type: improvement
Change-Id: I6c9002e961f6e06fc953ca42d86febf4f218e566
Signed-off-by: Naveen Joy <najoy@cisco.com>
Encode entropy value in UDP source port when requested per RFC 7510.
CLI already has "src-port-is-entropy", use zero UDP source port in API
to avoid breaking changes, since zero port is not something to be used
in wild.
Also, mark UDP encapsualtion API as mp-safe as already done for CLI.
Type: feature
Change-Id: Ieb61ee11e058179ed566ff1f251a3391eb169d52
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Type: test
"test_wg_handshake_ratelimiting_multi_peer" has been unstable recently
because the test strongly relies on execution speed. Currently, the test
triggers ratelimiting for peer 1 and sends handshake initiations from
peer 1 and 2 mixed up. After that, the test expects that all handshake
initiations for peer 1 are ratelimited and a handshake response for peer
2 is received.
Ratelimiting is based on the token bucket algorithm. The more time
passes between triggering ratelimiting for peer 1 and sending a mixture
of handshake initiations from peer 1 and 2, the more tokens will be
added into the bucket for peer 1. Depending on delays between these
steps, the number of tokens might be enough to process handshake
initiations from peer 1 while they are expected to be rejected due to
ratelimiting.
With this change, these two steps are combined into one and the logic
modified. The test triggers ratelimiting for both peer 1 and 2. Packets
that trigger ratelimiting and that are to be rejected are sent in one
batch that is going to reduce delays between packet processing. Also,
verify that number of rejected handshake messages is in expected range
instead of verifying the exact number as it still may slightly vary.
Also, this should finish making the wireguard tests stable on Ubuntu
22.04 and Debian 11.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I3407d15abe1356dde23a241ac3650e84401c9802
Type: fix
Currently, when a wg interface is administratively disabled initially or
during operation, handshake packets continue to be sent. Data packets
stop being sent because routes pointing to the wg interface will not be
used. But data keys remain.
With this fix, when a wg interface is administratively disabled during
peer creation, avoid connection initialization to the peer. Data keys
and timers should be empty at this point. When a wg interface is
disabled during operation, disable all peers (i.e. stop all timers,
clear data keys, etc.). Thus, state should be identical in both cases.
When a wg interface is administratively enabled, enable all peers (i.e.
get ready to exchange data packets and initiate a connection). Also,
cover these scenarios with tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ie9a620077e55d519d21b0abc8c0d3c87b378bca3
Type: fix
As per the protocol:
A handshake initiation is retried after "REKEY_TIMEOUT + jitter" ms,
if a response has not been received...
Currently, if retransmit handshake timer is started, it will trigger
after "REKEY_TIMEOUT + jitter" ms and will try to send a handshake
initiation via wg_send_handshake() given that no responses have been
received. wg_send_handshake() will verify that time stored in
REKEY_TIMEOUT has passed since last handshake initiation sending and if
has, will send a handshake initiation. Time when a handshake initiation
was last sent is stored in last_sent_handshake.
The problem is that last_sent_handshake is not only updated in
wg_send_handshake() when sending handshake initiations but also in
wg_send_handshake_response() when sending handshake responses. When
retransmit handshake timer triggers and a handshake response has been
sent recently, a handshake initiation will not be sent because for
wg_send_handshake() it will look like that time stored in REKEY_TIMEOUT
has not passed yet. Also, the timer will not be restarted.
wg_send_handshake_response() must not update last_sent_handshake,
because this time is used only when sending handshake intitiations. And
the protocol does not say that handshake initiation retransmission and
handshake response sending (i.e. replying to authenticated handshake
initiations) must coordinate.
With this fix, stop updating last_sent_handshake in
wg_send_handshake_response().
Also, this fixes tests that used to wait for "REKEY_TIMEOUT + 1" seconds
and did not receive any handshake initiations. Then they fail.
Also, long-running tests that send wrong packets and do not expect
anything in reply may now receive handshake intiations, consider them as
replies to the wrond packets, and fail. Those are updated to filter out
handshake initiations in such verifications. Moreover, after sending
wrong packets, error counters are already inspected there to confirm
packet processing was unsuccessful.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I43c428c97ce06cb8a79d239453cb5f6d1ed609d6
This patch introduces fast path matching for inbound traffic ipv6.
Fast path uses bihash tables in order to find matching policy.
Adding and removing policies in fast path is much faster than in current
implementation. It is still new feature and further work needs
and can be done in order to improve the perfromance.
Type: feature
Change-Id: Iaef6638033666ad6eb028ffe0c8a4f4374451753
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Usage:
test/run.py -r -t {test_filter}
Instead of starting a new instance of VPP, when the -r argument
is provided, test is run against a running VPP instance. Optionally,
one can also set the VPP socket directory using the -d
argument. The default location for socket files is
/var/run/user/${uid}/vpp and /var/run/vpp if VPP is started
as root.
Type: improvement
Change-Id: I05e57a067fcb90fb49973f8159fc17925b741f1a
Signed-off-by: Naveen Joy <najoy@cisco.com>
It's known there're one or more 32-bit increments in the ip
header. So just check ip router alert option length with minimal
performance impact, and don't care of the total options length.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I46dd06516f793846b931a1dc8612f2735f8d24d3
When we follow arp feature arc for proxy-arp, we should still update
the error reason in case proxy-arp cannot handle the arp request and
drops it.
Type: improvement
Change-Id: I046df017ca2056cfc12af0f0a968b401058bcd6d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
The number of available dynamic ports is set to (0xffff - 1024) =
64511, which is not divisable by the pow2 number of workers - the
only integer divisors are 31 and 2081.
So, total dynamic port range of all workers will be less than it:
1 wrk: n = (port_per_thread = 64511/1)*1 = 64511 + 1025 = 65536
2 wrk: n = (port_per_thread = 64511/2)*2 = 64510 + 1025 = 65535
4 wrk: n = (port_per_thread = 64511/4)*4 = 64508 + 1025 = 65533
8 wrk: n = (port_per_thread = 64511/8)*8 = 64504 + 1025 = 65529
...
As seen, with multiple workers there are unused trailing ports for every
nat pool address and that is the reason of out-of-bound index in the
worker array on out2in path due (port - 1024) / port_per_thread math.
This was fixed in 5c9f9968de63fa627b4a72b344df36cdc686d18a, so packets
to unused ports will go to existing worker and dropped there.
Per RFC 6335 https://www.rfc-editor.org/rfc/rfc6335#section-6:
6. Port Number Ranges
o the System Ports, also known as the Well Known Ports, from 0-1023
(assigned by IANA)
o the User Ports, also known as the Registered Ports, from 1024-
49151 (assigned by IANA)
o the Dynamic Ports, also known as the Private or Ephemeral Ports,
from 49152-65535 (never assigned)
According that let's allocate dynamic ports from 1024 and have full port
range with a wide range of the workers number - 64 integer divisors in
total, including pow2 ones:
1 wrk: n = (port_per_thread = 64512/1)*1 = 64512 + 1024 = 65536
2 wrk: n = (port_per_thread = 64512/2)*2 = 64512 + 1024 = 65536
3 wrk: n = (port_per_thread = 64512/3)*3 = 64512 + 1024 = 65536
4 wrk: n = (port_per_thread = 64512/4)*4 = 64512 + 1024 = 65536
5 wrk: n = (port_per_thread = 64512/5)*5 = 64510 + 1024 = 65534
6 wrk: n = (port_per_thread = 64512/6)*6 = 64512 + 1024 = 65536
7 wrk: n = (port_per_thread = 64512/7)*7 = 64512 + 1024 = 65536
8 wrk: n = (port_per_thread = 64512/8)*8 = 64512 + 1024 = 65536
...
Modulo from 5c9f9968de63fa627b4a72b344df36cdc686d18a is still required
when the numbers of workers is not the integer divisor of 64512.
Type: fix
Fixes: 5c9f9968de63fa627b4a72b344df36cdc686d18a
Change-Id: I9edaea07e58ff4888812b0d86cbf41a3784b189e
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
This patch introduces fast path matching for inbound traffic ipv4.
Fast path uses bihash tables in order to find matching policy. Adding
and removing policies in fast path is much faster than in current
implementation. It is still new feature and further work needs
and can be done in order to improve perfromance.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Ifbd5bfecc21b76ddf8363f5dc089d77595196675
Free node frames in worker mains on refork. Otherwise these frames are
never returned to free pool and it causes massive memory leaks if
performed under traffic load
Type: fix
Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru>
Change-Id: I15cbf024a3f4b4082445fd5e5aaa10bfcf77f363
Type: improvement
If an SA protecting an IPv6 tunnel interface has UDP encapsulation
enabled, the code in esp_encrypt_inline() inserts a UDP header but does
not set the next protocol or the UDP payload length, so the peer that
receives the packet drops it. Set the next protocol field and the UDP
payload length correctly.
The port(s) for UDP encapsulation of IPsec was not registered for IPv6.
Add this registration for IPv6 SAs when UDP encapsulation is enabled.
Add punt handling for IPv6 IKE on NAT-T port.
Add registration of linux-cp for the new punt reason.
Add unit tests of IPv6 ESP w/ UDP encapsulation on tun protect
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: Ibb28e423ab8c7bcea2c1964782a788a0f4da5268
In RFC 7296, CREATE_CHILD_SA Exchange may contain the KE payload
to enable stronger guarantees of forward secrecy.
When the KEi payload is included in the CREATE_CHILD_SA request,
responder should reply with the KEr payload and complete the key
exchange, in accordance with the RFC.
Type: improvement
Signed-off-by: Atzm Watanabe <atzmism@gmail.com>
Change-Id: I13cf6cf24359c11c3366757e585195bb7e999638
Type: fix
After peers roaming support addition, FIB entry tracking stopped
working. For example, it can be observed when an adjacency is stacked on
a FIB entry by the plugin and the FIB entry hasn't got ARP resolution
yet. Once the FIB entry gets ARP resolution, the adjacency is not
re-stacked as it used to. This results in endless ARP requests when a
traffic is sent via the adjacency.
This is broken because the plugin stopped using "midchain delegate" with
peers roaming support addition. The reason is that "midchain delegate"
didn't support stacking on a different FIB entry which is needed when
peer's endpoint changes. Now it is supported there (added in 36892).
With this fix, start using "midchane delegate" again and thus, fix FIB
entry tracking. Also, cover this in tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Iea91f38739ab129e601fd6567b52565dbd649371
Type: refactor
- refactored VPP test code to remove "ignore_path" variable
from "discover_tests" function and "run_test" code
- configured VPP test makefile, config file, and 'run.sh' shell script
to move "venv" directory from "test" dir to "build-root" dir
Signed-off-by: Saima Yunus <yunus.saima.234@gmail.com>
Change-Id: Id2beecbb99f24ce13ed118a1869c5adbef247e50
Type: feature
With this change, peers are able to roam between different external
endpoints. Successfully authenticated handshake or data packet that is
received from a new endpoint will cause the peer's endpoint to be
updated accordingly.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ib4eb7dfa3403f3fb9e8bbe19ba6237c4960c764c
Type: feature
With this change, if being under load a handshake message with both
valid mac1 and mac2 is received, the peer will be rate limited. Cover
this with tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Id8d58bb293a7975c3d922c48b4948fd25e20af4b
Type: feature
With this change:
- if the number of received handshake messages exceeds the limit
calculated based on the peers number, under load state will activate;
- if being under load a handshake message with a valid mac1 is
received, but mac2 is invalid, a cookie reply will be sent.
Also, cover these with tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I3003570a9cf807cfb0b5145b89a085455c30e717
Use the script test/run.py to run a test named test_vm_tap
inside a QEMU VM. The run script builds out a virtual env,
launches a light weight QEMU VM, mounts host directories,
starts VPP inside the VM and runs the test. The test named
test_vm_tap, creates two tap v2 interfaces in separate Linux
namespaces and using iPerf, streams traffic between the VM
and VPP. All data files are stored in the directory named
/tmp/vpp-vm-tests. To clean up, use the make test-wipe
command.
Usage:
test/run.py --vm --debug --test test_vm_tap
Type: improvement
Change-Id: I4425dbef52acee1e5b8af5acaa169b89a2c0f171
Signed-off-by: Naveen Joy <najoy@cisco.com>
Type: feature
Currently, if a handshake message is sent and a cookie message is
received in reply, the cookie message will be ignored. Thus, further
handshake messages will not have valid mac2 and handshake will not be
able to be completed.
With this change, process received cookie messages to be able to
calculate mac2 for further handshake messages sent. Cover this with
tests.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I6d51459778b7145be7077badec479b2aa85960b9
