- Required for Ubuntu 24.04 LTS jobs
- temporarily disable TestIpsecEsp1 and
TestIpsecAhAll tests until a patch can
be added to fix them
Type: test
Change-Id: I1ae7b170117182c3252629bbbb770775e2c496c9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
When the NIC does not support mac filter, we rely on ethernet-input
node to do the destination mac check, ie, when the interface is in L3,
the mac address for the packet must be the mac address of the
interface where the packet arrives. This works fine in ethernet-input
node when all packets in the frame might have different interfaces, ie,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is not set in the frame. However,
when all packets are having the same interface,
ETH_INPUT_FRAME_F_SINGLE_SW_IF_ID is set, ethernet-input node goes
through the optimized routine eth_input_single_int -> eth_input_process_frame.
That is where dmac check has a bug when all packets in the frame are
either, ip4, ip6, or mpls without vlan tags. Because without vlan tags,
the code handles all packets in fast path and ignores dmac check.
With vlan tags, the code goes to slow path where dmac check is handled
properly.
The fix is to check if we have a bad dmac in the fast path and force the
code to go to slow path which will handle dmac check properly.
Also do a wholesale correction on all the testcases which do not use
the proper dmac when sending L3 packets.
Type: fix
Change-Id: I73153a805cecdc24c4eefcc781676de04737ae2c
Signed-off-by: Steven Luong <sluong@cisco.com>
- Make framework.py classes a subset of asfframework.py classes
- Remove all packet related code from asfframework.py
- Add test class and test case set up debug output to log
- Repatriate packet tests from asf to test directory
- Remove non-packet related code from framework.py and
inherit them from asfframework.py classes
- Clean up unused import variables
- Re-enable BFD tests on Ubuntu 22.04 and fix
intermittent test failures in echo_looped_back
testcases (where # control packets verified but
not guaranteed to be received during test)
- Re-enable Wireguard tests on Ubuntu 22.04 and fix
intermittent test failures in handshake ratelimiting
testcases and event testcase
- Run Wiregard testcase suites solo
- Improve debug output in log.txt
- Increase VCL/LDP post sleep timeout to allow iperf server
to finish cleanly.
- Fix pcap history files to be sorted by suite and testcase
and ensure order/timestamp is correct based on creation
in the testcase.
- Decode pcap files for each suite and testcase for all
errors or if configured via comandline option / env var
- Improve vpp corefile detection to allow complete corefile
generation
- Disable vm vpp interfaces testcases on debian11
- Clean up failed unittest dir when retrying failed testcases
and unify testname directory and failed linknames into
framwork functions
Type: test
Change-Id: I0764f79ea5bb639d278bf635ed2408d4d5220e1e
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Drop pycodestyle for code style checking in favor of black. Black is
much faster, stable PEP8 compliant code style checker offering also
automatic formatting. It aims to be very stable and produce smallest
diffs. It's used by many small and big projects.
Running checkstyle with black takes a few seconds with a terse output.
Thus, test-checkstyle-diff is no longer necessary.
Expand scope of checkstyle to all python files in the repo, replacing
test-checkstyle with checkstyle-python.
Also, fixstyle-python is now available for automatic style formatting.
Note: python virtualenv has been consolidated in test/Makefile,
test/requirements*.txt which will eventually be moved to a central
location. This is required to simply the automated generation of
docker executor images in the CI.
Type: improvement
Change-Id: I022a326603485f58585e879ac0f697fceefbc9c8
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Several test cases re-use the same test class name,
which leads to test error when do parrallel test with TEST_JOBS=16,
change the test class names to unique values.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: Iefc01d40a25ebd60533baf3a2dc98a537437e8e9
Type: fix
- IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer
- IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places
- IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local
- IPv6oMPLS should send back TooBig ICMP6 for non locally generated
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
Type: refactor
The Tunnel Endpoint Informatiob Base (TEIB) is a better
description of what it is (a mapping between tunnel endpoint
address, in the overlay, and next-hop address, in the underlay)
whereas NHRP is one instanc eof a control protocol that might add
such endpoints.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Idcb2ad0b6543d3e5d9f6e96f9d14dafb5ce2aa85
Type: fix
Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python'
as a valid shebang line. It requires scripts to explicitly chose
between python2 or python3.
Change all to use python3 as suggested by Paul Vinciguerra.
Depends-On: https://gerrit.fd.io/r/23170
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
Type: fix
if the packet is about to be fragmented, then don't call any of the
actions that expect the rewrite to have been written.
1) don't double count packets thru the adjacency (original & fragments)
2) don't double decrement the TTL for fragments
3) return to ip4-midchain post ip-frag if that's where we started.
4) only run midchain/mcast fixups if not fragmenting (if no errors)
Change-Id: Ib2866787a42713ee5871b87b597d8f74b901044b
Signed-off-by: Neale Ranns <nranns@cisco.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
The current code only allowed access to the main thread error counters.
That is not so useful for a multi worker instance.
No return a vector indexed by thread of counter_t values.
Type: fix
Change-Id: Ie322c8889c0c8175e1116e71de04a2cf453b9ed7
Signed-off-by: Ole Troan <ot@cisco.com>
limit max # of fragments to 3 per packet by default
add API option to configure the limit at runtime
Change-Id: Ie4b9507bf5c6095b9a5925972b37fe0032f4f9e8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/
Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Part of further cleanups of this file.
Removed most wrappers that don't have conflicting signature with
message API.
Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c
Signed-off-by: Ole Troan <ot@cisco.com>
Add 2/3 support to binarytomac and mactobinary and move to vpp_mac.py
Change-Id: I3dc7e4a24486aee22140c781aae7e44e58935877
Signed-off-by: Ole Troan <ot@cisco.com>
First argument of a method should be named 'self'.
Change-Id: I7260916ce9d96108202b650dbf7ac8ce4b3aafdc
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1
Leading to crash for ICMP generated on tunnelled packets
- Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so
IP in IPv6 packets never got fragmented.
- Add support for fragmentation of buffer chains.
- Remove support for inner fragmentation in frag code itself.
Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27
Signed-off-by: Ole Troan <ot@cisco.com>
Move from using a hash to a vector with offsets into shared memory.
Limit exposure of VPP data structures and include files to
external stats library and applications.
Change-Id: Ic06129f12d10cf4c4946a86d9bc734eacff2c7da
Signed-off-by: Ole Troan <ot@cisco.com>
- common types on the API
- endpoints keyed in various ways for DP lookup
- conparison functions for VPP IP address types
Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
from vpp_papi.vpp_stats import VPPStats
s = VPPStats(socketname='/var/run/stats.sock')
c = s.ls('/if/rx')
counters = s.dump(c)
print(s.set_error_str())
Change-Id: I203ebe60b0c9ee5742aadc737c0f29051757959d
Signed-off-by: Ole Troan <ot@cisco.com>
Add support for either copying TOS/TC from inner packet to outer,
or set to fixed value.
Change-Id: I716a95f875349acec94317b266c8cf9f2f81a785
Signed-off-by: Ole Troan <ot@cisco.com>
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
