Now when lcp pair is created, tap instance is based on hw_id. But tap
interface with such instance can already exist. Introduce an offset and
auto-selection based on it.
Type: fix
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
Change-Id: I9db39106b0b0d5bf95c445b03e5b7ff52f946dd2
Type: fix
The flowprobe-input-ip4 node must be run ahead of ip4-inacl in some scenarios
to ensure that it sees flows on receiving interfaces.
The same is presumably the case for flowprobe-input-ip6, but this hasn't been
tested/observed.
JIRA: VPP-2122
Change-Id: Idf3b14dd2bd829f9aa3b1a71ccdcdf015ccdb36a
Signed-off-by: Scott Hutton <schutton@cisco.com>
In some multi-process/thread applications, a connection FD
is created on main process and actual data processing is done
in worker process. The main process does nothing. For such
applications, when multi-thread-workers is enabled, in current
VLS code, the session events are still enqueued to the VCL
worker corresponding to Main process. As the main process is
not dequeuing any event, application doesn't move forward.
This patch fixes this issue by enabling VCL worker
corresponding to the Worker process as listener of the session.
Type: improvement
Signed-off-by: Mohamed Feroz <mabdulmajeet@marvell.com>
Change-Id: Ia7e6270c1acbce7feeafbf281c661285d63c3b22
Previously, iavf_port_add_del_eth_addr was not using large enough buffer
and address sanitizer does not allow that.
Type: fix
Change-Id: Icd1491fb5651aed20685d15224e9c725347ef369
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
Add RSS support to make use of multiple queues.
With 4 RX queues and RSS enabled
ping from host to guest vm ip queue use
192.168.2.3 192.168.2.1 2
'' 192.168.2.10 0
'' 192.168.2.5 1
'' 192.168.2.105 3
With 4 RX queues and RSS disabled, queue 0 is always used for all of the above cases
Type: improvement
Change-Id: I3ca78fd83fce26cbe8f23fee0a9034cb572bacb7
Signed-off-by: Steven Luong <sluong@cisco.com>
Currently, the per-numa buffer allocation doesn't support skipping the
allocation altogether for a particular NUMA domain - if it's set to
zero, it instead uses the default allocation.
Therefore, this changes the behavior so that the default is only used
if no per-numa allocation is specified, and an allocation of zero
is honored by not allocating a buffer at all.
Type: improvement
Change-Id: Ie9133b179a88eb884aa3da921e65292daea0df2d
Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
vnet flow enable is failing due to bogus bytes pointed by spec, mask
variables of roc_npc_flow_item structure. Using reference to local
variables defined in block scope is causing this. Moving the variable
declarations to function block scope fixes this issue.
Fixes: 064762e20
Type: fix
Signed-off-by: Sriram Vatala <svatala@marvell.com>
Change-Id: I3904199b5b2bd88cd02ada5604059ab6fd12eef7
On FreeBSD the affinity returned by cpuset gives us a bitmask
documenting the available cpus. This can be modified if we are jailed or
are launched via the cpuset(1) command.
Initialise the clib bitmask otherwise it is always 0 and we cannot
configure any workers.
Type: improvement
Change-Id: I067e373ea440c6fbd03839d1cf103c8b97d8a0c6
Signed-off-by: Tom Jones <thj@freebsd.org>
set http status according to whether app also sent the body
Type: improvement
Change-Id: Ia41603cc21b410ca6929ec3d3e7c4c6808305769
Signed-off-by: Matus Fabian <matfabia@cisco.com>
- basically a copy of LdpIperf test
- small update of LdpIperf test
- new LDP suite
Type: test
Change-Id: I3f8653288c6fc6dfd6a061315e983c000974d3ff
Signed-off-by: Adrian Villin <avillin@cisco.com>
Remove failed-summary.log from the previous run, otherwise it might be
displayed if all tests pass.
Type: test
Change-Id: I435de37e298105ed5b92012fe4da3cda3a0670b6
Signed-off-by: Matus Fabian <matfabia@cisco.com>
Request line must only start with method name and server should
ignore at least one empty line (CRLF) received prior to the
request-line.
Type: fix
Change-Id: Ifebd992dc4c13df1a3fabfcdef9e7ee644150a21
Signed-off-by: Matus Fabian <matfabia@cisco.com>
- load vpp plugin libraries path in gdb
- if core dump deceted change message in summary and show bt
Type: test
Change-Id: If5d44d29703edd16c816efc9d29e6a7a1b20613a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
Use ExpectWithOffset so Ginkgo's output point to the line in your test.
Type: test
Change-Id: Icb32c5be683f935a5e86f25c2ec5a6dfad2ec1ea
Signed-off-by: Matus Fabian <matfabia@cisco.com>
- exit status was incorrect when tests didn't compile
- better summary formatting
- removed "full stack trace: null" from summary when a test times out
Type: test
Change-Id: Idd6b6bf3429fc8b704dd2345d257e9bdce1b82b7
Signed-off-by: Adrian Villin <avillin@cisco.com>
Type: refactor
This patch moves osi into a plugin, and also modifies
the init functions of llc and snap to preserve init
order dependency (llc_init --> osi_init --> snap_init).
While the initial intent was to move osi/llc/snap together
into a single plugin, there exists a dependency on llc
in vnet/ethernet, which would require further refactoring
and testing work.
Change-Id: Ic0eff030ee29c8d316c0e0fe13931451aa193527
Signed-off-by: Hadi Rayan Al-Sandid <halsandi@cisco.com>
- add patch to scapy to use latest six module instead
of the old scapy specific six module which fails to
import moves sub-module on python 3.12
- fix warning for deprecated legacy editable install of vpp_papi
- skip failing testcases on ubuntu-24.04
Type: test
Change-Id: Idc1a008c6e45ba69caa50c2e245012eb05effed7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
- test moved to proxy_test.go
- topology and suite updated to be vpp/envoy proxy compliant
Type: test
Change-Id: Iabee50b76bb8d96851f831c0b57d0e98dc4b3a5f
Signed-off-by: Matus Fabian <matfabia@cisco.com>
- new container topologies and suites for VPP proxy and Envoy proxy
- removed build docker image since it can't be used with CI cache
builder, container builders are designed to be stateless, they
only preserve build-cache, but not images
Type: test
Change-Id: I93e4d079780d18d6aa3b5ce807adc4707b6f2d9b
Signed-off-by: Matus Fabian <matfabia@cisco.com>
- fixed a bug where vppinstance logs would concatenate -> each test now
has its own bind mount
- removed "--trace" flag to avoid skipped tests printing a full
stack trace. They are now only printed in the summary.
Type: test
Change-Id: Ib7f4254717cc798e456b9fca6f81685c8153ee2d
Signed-off-by: Adrian Villin <avillin@cisco.com>
Cmake has a dedicated CMAKE_DL_LIBS variable to get libdl; use it
instead of trying to find it manually.
Type: improvement
Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
Change-Id: I9969c6be029f6a6e09cccaecd50e9eaf7d785b34
This patch adds capability to update max_rx_frame_size on octeon
port.
Initial MTU value is being set in the "oct_port_start", which is
invoked every time the Ethernet interface is brought up, thus
overwriting any MTU value set by VPP CLI.
Moved the MTU initialization to "oct_port_init" to address this.
Type: feature
Change-Id: I00d0d52bc7711062cde47b8fe52e6823bb718d08
Signed-off-by: Alok Mishra <almishra@marvell.com>
This patch syncs mac address to cgx/rpm table at initialization,
which sets interface in unicast mode.
Type: fix
Change-Id: Icf64b91ce5c74cc399cad3d3358b951fb2a65297
Signed-off-by: Monendra Singh Kushwaha <kmonendra@marvell.com>
Use svm_fifo_peek in http_read_message and advance rx fifo head by
amount of bytes send to app, since not always you won't or can't
send all bytes.
Type: improvement
Change-Id: I84348c9df5c77ba386c9738a754295bb9ea0f7ef
Signed-off-by: Matus Fabian <matfabia@cisco.com>
Backend needs to return protocol to indicate if the prefix is ip4 or ip6.
Type: fix
Change-Id: If827c2e8b2a58051298968fa4d69de71ce9c4fcc
Signed-off-by: Steven Luong <sluong@cisco.com>
Since scapy 2.4.4, scapy will not decode the next layer if the fragment
offset is not 0 - IOW it will decode only for the 1st fragment.
See f1c26e77c5
Type: fix
Change-Id: If738734f90b15b24c0d98fec4bce4ff48c6d5fea
Signed-off-by: Benoît Ganne <bganne@cisco.com>
current approach saves state in per-thread data structure. in
multi-worker + nat-t cases udp/500 and udp/4500 might be dispatched on
different workers. this patch adds hands off packet to 1 explicit thread
- 1st worker (or main thread in case there're no workers) or to thread
that was explicitly set by user via configuration
Type: improvement
Change-Id: Ib5cd9a4b8612dfaa63b276035709524f7a492d4f
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
