Use of consistent API types for interface.api
Type: fix
Change-Id: I88206d7d0907cffd564031f73c9a996df2e5e21a
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length',
but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'.
Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'.
Type: refactor
Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Split this work up into pieces.
Please don't add new wrappers to vpp_papi_provider.py.
Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10
Signed-off-by: Ole Troan <ot@cisco.com>
Part of further cleanups of this file.
Removed most wrappers that don't have conflicting signature with
message API.
Change-Id: I6acd93d20291feb7731eb35ab2eb8c9f22f4632c
Signed-off-by: Ole Troan <ot@cisco.com>
In preparation to remove the wrappers in vpp_papi_provider.py, ensure
names used in tests match the actual API message names.
Change-Id: I230ca4eb75aa727ff68d702e085a2edbbc6b6d19
Signed-off-by: Ole Troan <ot@cisco.com>
Update the syntax to support abstract classes in python 2 and python 3.
Depends on: new style classes -- https://gerrit.fd.io/r/16166
Change-Id: Iad2c1240149f38b3faca1b37ab95d3d210e1daee
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change the definition of vl_api_mac_address_t to an aliased type.
Change-Id: I1434f316d0fad6a099592f39bceeb8faeaf1d134
Signed-off-by: Ole Troan <ot@cisco.com>
Add 2/3 support to binarytomac and mactobinary and move to vpp_mac.py
Change-Id: I3dc7e4a24486aee22140c781aae7e44e58935877
Signed-off-by: Ole Troan <ot@cisco.com>
Change to binascii.hexlify() for consistent bahavior.
Change-Id: Ie430cdd1ffeb6510db4aa037546e42d85992093b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Use six.reprlib. Uses repr for python 2 and reprlib for python 3.
Change-Id: Ia343a492d533bd511ed57166381e10a37e452d36
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
also some moving of l2 headers to reduce dependencies
Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
When VPP has an interface whose address is also applied to a TAP
interface on the host, then VPP's TAP interface will be unnumbered
to the 'real' interface and do proxy ARP from the host.
the curious aspect of this setup is that ARP requests from the host
will come from the VPP's own address.
Change-Id: Ia238790e1034ba3cd3facdab29387b65a31525f2
Signed-off-by: Neale Ranns <nranns@cisco.com>
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features().
Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour.
Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f
Signed-off-by: Neale Ranns <nranns@cisco.com>
allow this config to function:
set int ip address loop0 169.254.1.1/32 (the default GW address for attached hosts)
set int unnumbered af_packet0 use loop0 ('enable' IP on the host interface)
ip route add 192.168.1.1/32 via af_packet0 (where to find the host)
repeat for each host and host interface.
Inter-host communication is throught the /32 routes.
To allow this:
1 - attached host routes have the ATTACHED flag set, so the ARP code accepts then as legitimate sources
2 - unnumbered interfaces inherit the source address from the IP interface
Change-Id: Ib66c5f0e848c528f79372813adc3a0c11b50717f
Signed-off-by: Neale Ranns <nranns@cisco.com>
- add/delete IPv6 VRF instances and verify results by parsing output
of ip6_fib_dump API command and by traffic
- small changes in assert_nothing_captured and get_capture to get logged
unexpected packets
Change-Id: I32207447be2df942e335aa9890ff52fb88e46597
Signed-off-by: Jan Gelety <jgelety@cisco.com>
- IPv[46] mfib tables with support for (*,G/m), (*,G) and (S,G) exact and longest prefix match
- Replication represented via a new replicate DPO.
- RPF configuration and data-plane checking
- data-plane signals sent to listening control planes.
The functions of multicast forwarding entries differ from their unicast conterparts, so we introduce a new mfib_table_t and mfib_entry_t objects. However, we re-use the fib_path_list to resolve and build the entry's output list. the fib_path_list provides the service to construct a replicate DPO for multicast.
'make tests' is added to with two new suites; TEST=mfib, this is invocation of the CLI command 'test mfib' which deals with many path add/remove, flag set/unset scenarios, TEST=ip-mcast, data-plane forwarding tests.
Updated applications to use the new MIFB functions;
- IPv6 NS/RA.
- DHCPv6
unit tests for these are undated accordingly.
Change-Id: I49ec37b01f1b170335a5697541c8fd30e6d3a961
Signed-off-by: Neale Ranns <nranns@cisco.com>
- add/delete IPv4 VRF instances and verify results by parsing output
of ip_fib_dump API command and by traffic
Change-Id: I61ed5013adca29afd00b942f65be7bf964f38d85
Signed-off-by: Jan Gelety <jgelety@cisco.com>
includes Fix for VPP-584 with API change to remove prefix length from LL programming
Change-Id: If860751c35e60255fb977f73bc33e8c2649e728e
Signed-off-by: Neale Ranns <nranns@cisco.com>
- small correction of docstrings
- fix of create_pg_interface
Change-Id: I1958bd5ddaddaa2f7e6cbb18b0076e59e86d1e68
Signed-off-by: Jan Gelety <jgelety@cisco.com>
- JIRA: CSIT-255
- create loopback interfaces
- move pg-interface specific arp and neighbor discovery from vpp_interface to vpp_pg_interface
- base configuration of IRB tests
- IP test scenario
Change-Id: I9945a188163652a4e22325877aef008c4d029557
Signed-off-by: Matej Klotton <mklotton@cisco.com>
Add some 'make test' unit tests for MPLS explicit NULL label handling.
Fix the stacking of the MPLS load-balance result form the lookup onto the IPx lookup object.
Change-Id: I890d1221b8e3dea99bcc714ed9d0154a5f602c52
Signed-off-by: Neale Ranns <nranns@cisco.com>
