Type: feature
* initiator behind NAT supported
* tested with static NAT mappings
* works only with pre-configured tunnels
The pre-configured tunnel has to be defined as follows:
initiator (i) side: src=ip(i) dst=ip(r)
responder (r) side: src=ip(r) dst=ip(nat)
Change-Id: Ia9f79ddbbcc3f7dc8fde6bbeca2a433e3b784e94
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
- Remove vl_api_from_api_string
to prevent use of not nul-terminated strings.
- Rename vl_api_from_api_to_vec -> vl_api_from_api_to_new_vec
to imply a new vector is created. NOT nul terminated.
- Add vl_api_from_api_to_new_c_string. Returns
nul terminated string in a new vector.
- Add vl_api_c_string_to_api_string. Convert nul terminated
string to vl_api_string_t
- Add vl_api_vec_to_api_string. Convert NON nul terminated
vector to vl_api_string_t
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Iadd59b612c0d960a34ad0dd07a9d17f56435c6ea
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Type: improvement
allow clients that allocate punt reasons to pass a callback function
that is invoked when the first/last client registers to use/listen on
that punt reason. This allows the client to perform some necessary
configs that might not otherwise be enabled.
IPSec uses this callback to register the ESP proto and UDP handling
nodes, that would not otherwise be enabled unless a tunnel was present.
Change-Id: I9759349903f21ffeeb253d4271e619e6bf46054b
Signed-off-by: Neale Ranns <nranns@cisco.com>
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
APIs for dedicated IPSec tunnels will remain in this release and are
used to programme the IPIP tunnel protect. APIs will be removed in a
future release.
see:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I0f01f597946fdd15dfa5cae3643104d5a9c83089
Signed-off-by: Neale Ranns <nranns@cisco.com>
The 42693521f6 added the timeout
to the child process join + print the name of the offending
child process.
Upon testing the issue furher, appeared the offenders were
always the same - punt tests. The processes running them
were stuck trying to acquire lock, even if all
the user-accessible execution has finished. Some searching
revealed that one needs to tread carefully when dealing
with Thread and Multiprocessing at the same time.
punt tests used threads but did not call thread.join. Somehow
it worked in some cases but not the others. This fix makes
the threads exit cleanly - which also makes the timeouts
waiting for the process to join disappear.
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I05d99bb48a9987544bbfe45118755c09d7867aa0
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Type: fix
Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python'
as a valid shebang line. It requires scripts to explicitly chose
between python2 or python3.
Change all to use python3 as suggested by Paul Vinciguerra.
Depends-On: https://gerrit.fd.io/r/23170
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
In a lot of places within the unit tests pg_start() starts
the capture with an already existing capture running
for the same test.
If the pcap file already exists, then it is renamed and there
is no problem.
However, there is a potential for race if the previous
pg_start() has enabled the capture, but the check for
renaming it happened just slightly earlier than the first
packet has arrived.
Then a second call to pg_start() will hit a check that
a file exists, and will cause an error. This is especially
visible when running the tests in parallel due to increased
load.
Solution: disable the capture before enabling it.
This will flush the aready running capture and eliminate the race.
The additional delay that flushing of the pcap creates has exposed
several other race conditions:
NAT tests: Some of the NAT reassembly tests
verify that the entries were added to the reassembly data structures,
but do so by comparing the quantities of entries. With the default
timeout being 2s, some of the entries might timeout,
resulting in a bogus test failure.
Solution: Bump the timeout to 20s for the affected tests.
Punt tests: nr_packets == 3 makes test intermittently fail,
nr_packets > 3 make it reliably fail, and nr_packets = 2 works
Solution: set nr_packets == 2 for the time being
IGMP tests: the leave-group calls get a spurious packet
from the time the new groups were configured
Solution: add 1 second delay before starting to delete the groups
Type: test
Change-Id: I931182a7b2860cf670e030ee7da8038f6e87356d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Type: fix
There's no call for an SPI-0 punt reason with UDP encap, since
it's only with UDP encap that the ambiguity between IKE or IPSEC
occurs (and SPI=0 determines IKE).
Enhance the punt API to dum ponly the reason requested, so a client
can use this as a get-ID API
Change-Id: I5c6d72b03885e88c489117677e72f1ef5da90dfc
Signed-off-by: Neale Ranns <nranns@cisco.com>
Move output to log.txt.
11:51:58,111 Verifying against 3 packets in verify_udp_pkts.
11:51:58,111 ###[ Ethernet ]###
dst = 02:fe:4c:62:06:e5
src = 02:01:00:00:ff:02
type = 0x800
\###[ IP ]###
version = 4
ihl = 5
tos = 0x0
len = 128
...
Type: test
Change-Id: Iebaf34c2ac16e7fa8dffbdeadf18ab6c5f4c7494
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions
- move the punt nodes into punt_node.c
- improve tests (test that the correct packets are punted to the registered socket)
Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72
Signed-off-by: Neale Ranns <nranns@cisco.com>
The current code only allowed access to the main thread error counters.
That is not so useful for a multi worker instance.
No return a vector indexed by thread of counter_t values.
Type: fix
Change-Id: Ie322c8889c0c8175e1116e71de04a2cf453b9ed7
Signed-off-by: Ole Troan <ot@cisco.com>
* Configure tests to raise exception if cli_inband fails.
* Fix failing tests.
* Add filename detail to pcap.stat clib_error_return for debugging.
Note: this change identifies spurious issues with packet-generator such as:
CliFailedCommandError: packet-generator capture: pcap file
'/tmp/vpp-unittest-Test6RD-v09RPA/pg0_out.pcap' does not exist.
These issues resolve themselves on remaining test passes.
Change-Id: Iecbd09daee954d892306d11baff3864a43c5b603
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
* change literal packet count vlaues from 65 to a named constant of 67.
(This value was recommended to exercise single, dual, and quad loops)
Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
A punt/exception path that provides:
1) clients that use the infra
2) clients can create punt reasons
3) clients can register to recieve packets that are punted
for a given reason to be sent to the desired node.
4) nodes which punt packets fill in the {reason,protocol} of the
buffere (in the meta-data) and send to the new node "punt-dispatch"
5) punt-dispatch sends packets to the registered nodes or drops
Change-Id: Ia4f144337f1387cbe585b4f375d0842aefffcde5
Signed-off-by: Neale Ranns <nranns@cisco.com>
