Several test cases re-use the same test class name,
which leads to test error when do parrallel test with TEST_JOBS=16,
change the test class names to unique values.
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: Iefc01d40a25ebd60533baf3a2dc98a537437e8e9
Type: fix
- IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer
- IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places
- IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local
- IPv6oMPLS should send back TooBig ICMP6 for non locally generated
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
Type: improvement
For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages.
The rate limiting is done based on src,dst IP address of the received packet.
the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
Type: test
there were multiple instances of send_and_expect_load_balancing
and a send_and_expect_one_itf which has the same functionality as send_and_expect_one.
Put one implementation of both in framework.py (where the other send_and_X functions reside).
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I7f629d440220bee29368067f475059322e1134f7
Even when periodic RAs are disabled VPP would respond to
router solicitations. Making it impossible to have an IPv6
enabled interface with hosts connected to it without VPP
acting as a default router.
This change drops RS messages if the radv_info->send_radv is
off.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9a68f8e12c93c1c00125b54f8fd454f48fa22caa
Signed-off-by: Ole Troan <ot@cisco.com>
Type: fix
The fib source IP6_ND is used for all link-local entries, hence
solicitation responses were sent for a peer's address. Constrain the
source check to also in clude the LOCAL flag, which indicates that the
link-local address is ours.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iba7e66049e4d89ee3f36d77aeb09310b978d70de
VppTestCase now has vpp_worker_count property set to number of workers.
This can be overriden by child classes. Also overriden by
VPP_WORKER_CONFIG variable for legacy reasons.
Type: improvement
Change-Id: Ic328bacb9003ddf9e92815767653bd362aa7f086
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Type: feature
an client can dump the existing sources, examine their
priorities, then define thier own source.
Usefull if a client wants to distingusih between say, static,
ospf, bgp, etc routes it has added over the API.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I5158b4fa1ebe87381ff8707bb173217f56ea274a
Type: feature
Support setting the MTU for a peer on an interface. The minimum value of
the path and interface MTU is used at forwarding time.
the path MTU is specified for a given peer, by address and table-ID.
In the forwarding plane the MTU is enfored either:
1 - if the peer is attached, then the MTU is set on the peer's
adjacency
2 - if the peer is not attached, it is remote, then a DPO is added to
the peer's FIB entry to perform the necessary fragmentation.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8b9ea6a07868b50e97e2561f18d9335407dea7ae
Add to the IP[46] punt policer handoff tests by binding the policer to
a particular worker and checking all packets are policed on that thread.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I7fab28659ccb65f13f841cec65a3f808281b3f90
Add verification of policer stats in the IP[46] punt paths.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I8b1035afc2d3abe4e98bdb3a76e87a0dd131ef4b
Add a test for ip6 punt policer thread handoff. A child class is
created that uses common punt test setup but is configured to have 2
worker threads.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I65c44f5d79455129accd7cf405c15920a5a9b678
Move interface and packet setup for the ip6 punt test to its own
class so that child classes can be created that use it.
Type: test
Signed-off-by: Brian Russell <brian@graphiant.com>
Change-Id: I14acedc1bcd12cb320835a36833cd32303c5f793
Type: feature
A device/router needs to have a unique ID which is included in the flow
has so that flows are not polarised through the network, i.e. each deice
in the network chooses the same nth link for the same flow.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I963e03674adbb085902b4084fdc4886b88f5734c
We have accumulated several scenarios in prod or wishlists
where it would be useful to have a general infra to say yes/no
about a certain test, and potentially make decisions based on that,
for example:
- runs solo (aka 'time-dependent')
- (wishlist) part of quick smoke-test set
- (wishlist) intermittent failure unrelated to timing
- (wishlist) test broken with a multi-worker config in vpp
Refactor the current "run-solo" code to allow for this extension.
Type: test
Change-Id: Ia5b3810e57c0543753c8e0dc4dc0cfb4a30b36ac
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Type: fix
This is not an API change, it's the same values, just a different named
type.
also use VppEnum values in tests
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
Some of the tests are time-sensitive, and at present require a non-trivial
modification in order to run at high concurrency.
Without these modifications, they intermittently fail, and require
the test retries.
Rather than setting them to the extended tests and forgetting
about them, put them into a "solo" set, which gets run in a
single-threaded mode after the rest of the tests are done.
Mark a few of the tests that showed errors during TEST_JOBS=48
as forced-solo.
Also, give a better diagnostic if the testcase misses a docstring
needed to represent it in the diagnostic outputs.
Type: fix
Change-Id: I33fe62eb17edc1885bd2c3523892051d52da6546
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Add an IP_ROUTE_LOOKUP function that does either an exact match or
longest prefix match in a given fib table for a given prefix
returning the match if present.
Add API test.
Type: improvement
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-ID: I67ec5a61079f4acf1349a9c646185f91f5f11806
Fix of the top 11 python issues flagged as BLOCKER.
Ticket: VPP-1856
Type: fix
Change-Id: Icf4691e62f4a69d6ee196b6d6e2ab52d961b5c76
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia14f33992353b419b70b55beed63ab8ed6a2e837
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Make test framework python3 version independence.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1ef1eb77b6c1f422ebc4dad0818f87c8e587b34b
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
Type: feature
from the API doc, a table replace is:
"
The use-case is that, for some unspecified reason, the control plane
has a very different set of entries it wants in the table than VPP
currently has. The CP would thus like to 'replace' VPP's current table
only by specifying what the new set of entries shall be, i.e. it is not
going to delete anything that already eixts.
the CP delcartes the start of this procedure with this begin_replace
API Call, and when it has populated all the entries it wants, it calls
the below end_replace API. From this point on it is of coursce free
to add and delete entries as usual.
The underlying mechanism by which VPP implements this replace is
purposefully left unspecified.
"
In the FIB, the algorithm is implemented using mark and sweep.
Algorithm goes:
1) replace_begin: this marks all the entries in that table as 'stale'
2) download all the entries that should be in this table
- this clears the stale flag on those entries
3) signal the table converged: ip_table_replace_end
- this removes all entries that are still stale
this procedure can be used when an agent first connects to VPP,
as an alternative to dump and diff state reconciliation.
Change-Id: I168edec10cf7670866076b129ebfe6149ea8222e
Signed-off-by: Neale Ranns <nranns@cisco.com>
Raw('\xaf) and Raw(b'\xaf) are two quite different things in python 2 versus 3.
In most cases this didn't make a difference, apart from those cases where length
of payload actually mattered.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3cba5c1486e436a3ca8aa10a7b393da75aa9f6b9
Type: fix
Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python'
as a valid shebang line. It requires scripts to explicitly chose
between python2 or python3.
Change all to use python3 as suggested by Paul Vinciguerra.
Depends-On: https://gerrit.fd.io/r/23170
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
the IPv6 RA tests take timing into the account,
but the time inside VPP may go slightly differently compared
to the time inside the driving python thread,
if the machine running the tests is heavily loaded.
Make a sleep function which sleeps "on VPP time" and use it.
Change-Id: I3b34b0164f6e0ec7a619b92ee308089a4a8935e3
Type: test
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Type: feature
Adding a prefix to an interface was not permitted if it overlapped
with another prefix on an interface which used the same FIB.
Loosen the restriction. Allow 2 or more addresses from the same
prefix on a single interface. Reference count the prefix to figure
out when a glean/connected route for the prefix needs to be added
or removed.
Added unit tests to check that the route is only removed when all
addresses in the prefix are removed from the interface.
Change-Id: I1a962ecb5e1ee65fc6d41f98a4cc097a51a55321
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
format_vl_api_prefix_t returns a dict with keys 'address' and 'address_length',
but other format_vl_api_prefix functions return a dict with 'prefix', and 'len'.
Refactor all format_vl_api_prefix_t to return consistent keys 'address' and 'len'.
Type: refactor
Change-Id: I5f9558fc2da8742a303266e011102f5b2db80aad
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
This change is made fix a crash, because is_feature flag semantics turn
out to be different from "custom app code" semantics. Introduce a flag
which custom plugins/apps can use to instead of tying that code to
is_feature flag.
Change-Id: Ief5898711e68529f9306cfac54c4dc9b3650f9e3
Ticket: N/A
Type: fix
Fixes: 21aa8f1022590b8b5caf819b4bbd485de0f1dfe5
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Add a minimal ip6 hbh header processing test.
ioam plugin: use ip6_local_hop_by_hop_register_protocol() in
udp_ping_init().
Please test the ioam plugin udp_ping path AYEC, so I can
publish the patch.
Change-Id: I74e35276d6c38c31022026cfd238fad5e4a54485
Signed-off-by: Dave Barach <dave@barachs.net>
* change literal packet count vlaues from 65 to a named constant of 67.
(This value was recommended to exercise single, dual, and quad loops)
Change-Id: Ieb1738dddacb8b6ea7fa25883032ac01a98399e1
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/
Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Split this work up into pieces.
Please don't add new wrappers to vpp_papi_provider.py.
Change-Id: I0f8f2afc4cd2bba07ea70ddecea2d7319f7b2e10
Signed-off-by: Ole Troan <ot@cisco.com>
