Type: test
Change-Id: Ieeae7f1653f5f2e8e49f258871b389ef8954c90b
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit fbc388986e3f38aaedff87b843137be81b7d4f91)
Type: fix
Ticket: VPP-1756
the block-size was set to 0 resulting in incorrect placement of the ESP
footer.
add tests for NULL encrypt + integ.
Change-Id: I8ab3afda8e68f9ff649540cba3f2cac68f12bbba
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 2cdcd0cf4004b2c0d1d3b891e381aac5735c21f1)
This algorithm was missed in last improvements.
Type:fix
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
Change-Id: Ib818cbdcdd1a6f298e8b0086dac4189cc201baa3
(cherry picked from commit 77cc14a2b29a65073539e6e3f4683a380875b3dc)
Type: fix
Several Fixes:
1 - Anti-replay did not work with GCM becuase it overwrote the sequence
number in the ESP header. To fix i added the seq num to the per-packet
data so it is preserved
2 - The high sequence number was not byte swapped during ESP encrypt.
3 - openssl engine was the only one to return FAIL_DECRYPT for bad GCM
the others return BAD_HMAC. removed the former
4 - improved tracing to show the low and high seq numbers
5 - documented the anti-replay window checks
6 - fixed scapy patch for ESN support for GCM
7 - tests for anti-reply (w/ and w/o ESN) for each crypto algo
Change-Id: Id65d96b6d1d4dd821b2ab557e87468fff6d70e5b
Signed-off-by: Neale Ranns <nranns@cisco.com>
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Since 3DES has 8 bytes of initialization vector and
code contains hardcode for 16 bytes, check added to
determine if crypto algorythm is 3DES_CBC and set
corresponding iv_len param
Change-Id: Iac50c8a8241e321e3b4d576c88f2496852bd905c
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
hard code IV and key lengths based on cipher.
Init IV from random data, use AES instruction to rotate.
Change-Id: I13a6507d12267b823c528660a903787baeba47a0
Signed-off-by: Neale Ranns <nranns@cisco.com>
This change adds a consistent interface for adding test-specific show commands to
log.txt.
It also adds log markers for the execution of setUp[Class], tearDown[Class]
in the logs.
Change-Id: I7d42e396e594a59e866a7d55dac0af25548e657a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
A plugin to use Intel IPSec MB library as a VPP crypto engine
This changes uses concepts from:
https://gerrit.fd.io/r/#/c/17301/
hence that author's work is acknowledge below
Change-Id: I2bf3beeb10f3c9706fa5efbdc9bc023e310f5a92
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
refactor the IPSEC tests a bit so we can parameterise
the setup.
Change-Id: I777e5eb8f29ca1dce3dd273ebd05dae5846790af
Signed-off-by: Neale Ranns <nranns@cisco.com>
Continuation/Part 2 of https://gerrit.fd.io/r/#/c/17092/
Change-Id: Id0122d84eaf2c05d29e5be63a594d5e528ee7c9a
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
1) stats are accessed via the stat segment which is more condusive to
monitoring
2) stats are accurate in the presence of multiple threads. There's no
guarantee that an SA is access from only one worker.
Change-Id: Id5e217ea253ddfc9480aaedb0d008dea031b1148
Signed-off-by: Neale Ranns <nranns@cisco.com>
- return the stats_index of each SPD in the create API call
- no ip_any in the API as this creates 2 SPD entries. client must add both v4 and v6 explicitly
- only one pool of SPD entries (rhter than one per-SPD) to support this
- no packets/bytes in the dump API. Polling the stats segment is much more efficient
(if the SA lifetime is based on packet/bytes)
- emit the policy index in the packet trace and CLI commands.
Change-Id: I7eaf52c9d0495fa24450facf55229941279b8569
Signed-off-by: Neale Ranns <nranns@cisco.com>
- use enums to enumerate the algoritms and protocols that are supported
- use address_t types to simplify encode/deocde
- use typedefs of entry objects to get consistency between add/del API and dump
Change-Id: I7e7c58c06a150e2439633ba9dca58bc1049677ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
don't do the setup and teardown in class methods so that with
each test the config is added and deleted. that way we test that
delete actually removes state.
more helpful error codes from VPP for existing IPSEC state.
Change-Id: I5de1578f73b935b420d4cdd85aa98d5fdcc682f6
Signed-off-by: Neale Ranns <nranns@cisco.com>
This reverts commit a98346f664aae148d26a8e158008b773d73db96f.
Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12
Signed-off-by: Ole Troan <ot@cisco.com>
