Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
(cherry picked from commit 4a302ee7c7)
I had cleaned up the sample.md previously for 20.01, but when later
that was merged to master, the file was renamed. So, fix this issue.
Change-Id: I6347685af216901fbfdd445606735b9bf79f8fe5
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
crcchecker is a tool for enforcement of the binary API.
1. Production APIs should never change.
2. An API can be deprecated across three release cycles.
Release 1: API is marked as deprecated.
option deprecated="vyy.mm";
option replaced_by="new_api_2";
Release 2: both old and new APIs are supported
Release 3: the deprecated API is deleted.
3. APIs that are experimental / not released are not checked.
An API message can be individually marked as in progress, by:
option status="in_progress";
In the API definition.
The definition of a "production API" is if the major version in the API file is > 0.
extras/scripts/crcchecker.py --check-patchset # returns -1 if backwards incompatible
extras/scripts/crcchecker.py --dump-manifest
extras/scripts/crcchecker.py --git-revision v20.01 <files>
extras/scripts/crcchecker.py -- diff <oldfile> <newfile>
This patch integrates the tool in "make checkstyle-api".
A future patch is required to integrate the tool in the verify job.
I.e. this patch does not enable enforcement through Jenkins.
Change-Id: I5f13c0976d8a12a58131b3e270f2dc9c00dc7d8c
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
- add option to install only host tools
- add option to specify lib and runtime dir
Type: improvement
Change-Id: I6356b52df459120fc9b0127948bae7679fb10e52
Signed-off-by: Damjan Marion <damarion@cisco.com>
Bonus corner-case bugfix in bitmap.h, found during the exercise.
Issue dates from 2001 or thereabouts. Please review this specific
change carefully.
lcov_post: filter system include directories and generated files in
build-root
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iaa0b63e9dc571dfe3d992197ac49ba4d93403c61
Support for startup node multi-arch variant selection through startup.conf.
This is to facilitate unit, functional testing and benchmarking of non-default
multi-arch variant node code path. Also added parameters to make test, to
specific using multi-arch variants in unit testing.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I94fd332bb629683b7a7dd770ee9f615a9a424060
i2c follows its only use case - the original 82599 driver - into
extras/deprecated.
cj is/was an emergency debug tool unused in several years. Move to
extras/deprecated/vlib
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib55b65373f62630db295c562974bd8f2456c3107
Minor change to vec_sort_with_function(...): don't depend on the qsort
implementation to deal with null, zero-long, or 1-long vectors
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7bd7b0421673d2a025363089562aa7c6266fba66
See .../extras/pg/checksum_offload.pg for a nontrivial example, which
deliberately sets bogus ip and udp checksums in the generated packets,
then fixes the mess with (software emulated) hardware checksum
offload.
Validated via "pcap dispatch trace on max 1000 buffer-trace pg-input 100".
Packets stuffed into loop1-output have the configured bogus ip and udp
checksums. vnet_calc_checksums_inline(...) fixes the checksums, which
are correct when packets visit loop1-tx.
The packet generator is a dumb robot in this regard. If you ask for a
ridiculous flag combination - example: ip4 and ip6 - your mileage may
vary.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I6d9e790f373bcd9e445a89113ca8e4c8f9aa9419
Fix of the top 11 python issues flagged as BLOCKER.
Ticket: VPP-1856
Type: fix
Change-Id: Icf4691e62f4a69d6ee196b6d6e2ab52d961b5c76
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I09fa6c1b6917936351bd376b56c414ce24488095
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: If90d753f129312400c4c3669bb86289d0c3e0d99
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I7f6f37ec6eed780322e2488d6eb0f5681945ba09
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
policycoreutils-python is now called python3-policycoreutils on
CentOS 8.
Type: fix
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: I46264c66a2a719d546e0926f3bd716e986461963
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I2fe6b56dc0f224f438ed5f14c0f276d94afbaea8
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ifddac07b15b116574de3a97f7c80d7bf6a3171f7
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Avoid using vec_del1() for directory vector to keep indexes valid all
the time.
There are state counters for each slave in LACP bond mode which can be
dynamically created and removed. Vector index is used to access these
counters. But also vec_del1() is used to remove counter from vector.
This function changes the index of the last element, so after this we
are unable to access ex-last element using old index.
As a result it is not possible to add-del-add two interfaces to the LACP
bond:
DBGvpp# create bond mode lacp
BondEthernet0
DBGvpp# create packet-generator interface pg1
DBGvpp# create packet-generator interface pg2
DBGvpp# bond add BondEthernet0 pg1
DBGvpp# bond add BondEthernet0 pg2
DBGvpp# bond del pg1
DBGvpp# bond del pg2
DBGvpp# bond add BondEthernet0 pg1
DBGvpp# bond add BondEthernet0 pg2
bond add: /if/lacp/1/3/partner-state is already register
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I2c86e13905eefdef6233369cd4ab5c1b53d123bd
Not in functional state for a long time ...
Type: refactor
Change-Id: I2cc1525a6d49518cbc94faf6afbf0d2d0d515f56
Signed-off-by: Damjan Marion <damarion@cisco.com>
Both are out of sync for long time...
Type: refactor
Change-Id: I7de3170d35330fc172501d87655dfef91998b8fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
Event polling instance is always identified by libmemif main private context.
Fixes event polling handled by libmemif.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I51dcdb279b18f8ce97bad3b2695848e0b25a232d
Bang on sed until a better incantation appears.
Change-Id: Ib8ad0996b6325db0fe983c86dd7dc553c9d388c4
Type: fix
Fixes: 26ce6ca1fe
Signed-off-by: Jon Loeliger <jdl@netgate.com>
- Also cleanup local var declarations
- remove extraneous export statement
Type: test
Change-Id: I22198a65d1785ba53d1de22b2aa498cab910701b
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Adds the higher-level vapi generation to cmake/api.cmake and exposes
the necessary python scripts in vpp-dev, so that out-of-tree/downstream
plugins can also leverage the more convenient API.
Type: feature
Signed-off-by: Oliver Giles <oliver_g@radwin.com>
Change-Id: I8c40a14d27ba3cb972c6907632e03c0e7b0ce982
Type: feature
- ip-neighbour: generic neighbour handling; APIs, DBs, event handling,
aging
- arp: ARP protocol implementation
- ip6-nd; IPv6 neighbor discovery implementation; separate ND,
MLD, RA
- ip6-link; manage link-local addresses
- l2-arp-term; events separated from IP neighbours, since they are not
the same.
vnet retains just enough education to perform ND/ARP packet
construction.
arp and ip6-nd to be moved to plugins soon.
Change-Id: I88dedd0006b299344f4c7024a0aa5baa6b9a8bbe
Signed-off-by: Neale Ranns <nranns@cisco.com>
Configure n-tuple classifier filters which apply to the vpp packet
tracer.
Update the documentation to reflect the new feature.
Add a test vector.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Iefa911716c670fc12e4825b937b62044433fec36
- A bash function which enhances reproduction,
debugging, and verification of intermittent
make test failures.
Type: test
Change-Id: I2faf56829d0633963506e136a68b77b8a1b32236
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Type: fix
Since CentOS 8, RPM build script doesn't accept '#!/usr/bin/env python'
as a valid shebang line. It requires scripts to explicitly chose
between python2 or python3.
Change all to use python3 as suggested by Paul Vinciguerra.
Depends-On: https://gerrit.fd.io/r/23170
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: Ie72af9f60fd0609e07f05b70f8d96e738b2754d1
